Is Hoefler Text safe for the web?

I notice that Hoefler Text is the default font for the Highlighter theme. Yet it does not appear in the web-safe fonts list.
Should I change all my pages from Hoefler Text to a font on the list?
Will I run into problems by leaving them as Hoefler?

Keith Raygor wrote:
I notice that Hoefler Text is the default font for the Highlighter theme. Yet it does not appear in the web-safe fonts list.
I started with Hoefler and ran into trouble with the way my text looked in Windows, particularly with IE. So, after some experimentation, I changed to Verdana.
Phil

Similar Messages

I have just installed Lion and the text window for the web address in safari has disappeared. Anyone know how to get it back?

I have just installed Lion and the text window for web addresses in safari has disappeared. Any ides how to getit back?

Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.

How to create clean text for the web in Photoshop/Illustrator

I am puzzled to death on how in the world to get clean text for the web in Photoshop/Illustrator, particularly white text. I want my text to turn out exactly like the text at this website: thepainteddoor.org
If you scroll down to the bottom of that page, notice the titles "Featured Media", "Social Networking", and "Contact Information". They are all .gif images. I have tried to replicate what these images look like for about 3 hours now to no avail. Can anyone tell me how to do this? It just looks like a simple outline or drop shadow, but I can't get it to show up like that. If someone could help me replicate that effect with text (aka make it show up clean as an image), I would graciously give them money through PayPal*.
* = I will only give cash if it will replicate it exactly (and I mean exactly)..and it won't be too much..I'm a poor college student. :-P
Thanks in advance!
Thomas

You would do it the way I created it:
Select the Text tool in Photoshop and set the font and parameters as I have listed. Then enter whatever text you like. It will be rendered over the top of the lower layers you may have in the document. Save as an image of the appropriate type and you're there.
Note that "lower layers you may have in the document" could conceivably be none at all (i.e., you render the text over a transparent document). You could imagine saving that as a .png with transparency and get light text in an image that could then be put over the top of anything else. The alpha mixing will see to it that the edges smoothly blend with the background. I haven't actually tried this (I usually do try my own suggestions) because of lack of time right now.
-Noel
Edit: Markerline and I seem to be on the same crystal-controlled wavelength.

Create a new dimension in business layer from Data source: text file on the web

Hi,
I have a text data source which is published every few hours that is accessible from a certain URL. I follow the instruction given in this http://scn.sap.com/docs/DOC-43144 - where it shows in great detail how to create the connection, data foundation as well as business layer to create a universe for this type of data.
All is well - I can use this universe in my WEBI doc and display the data.
However, in order for me to merge the data from this universe with another universe, I need to create new dimension based on the data from the text file. The new dimension value is simply the first 4 characters of the Subject found in the text file. The "Subject" dimension is of variant type: varchar.
Following the guide mentioned earlier, the connection is using SAP BO OpenConnectivity driver. And this driver limits severely the SQL statement that I can use to extract a substring of another string. Here's the screenshot of the SQl expression that I can use with this driver
After hours of searching, I cannot find any other connection driver for a text file that's published on a certain URL. The BO OpenConnection driver is the best that I could find.
So here are my problems
1. one of my data source is a text file published on a web
2. the only connection I can create does not allow me to create new dimension in the universe to create an important column "subject ID"
3. I can create the column in webi as a variable. But when I do so, I cannot merge it with existing dimension (webi not allowing to merge these 2 types). And without the merge, the flat file universe with my database universe can't be combined.
I'm using WEBI Rich client version 4.1 SP3 Patch 1. Build 14.1.3.1300
Is there any other idea that you can suggest without requiring to change the extracted data?
Thanks.
With warm regards

Hi Bala,
Were you able to find out a solution for the problem with uploading values for a variable from a text file on the web? I am confronted with the same request from users.
Thanks,
BQ

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%) If I move the application window to another screen it adjusts it correctly – leaving all the pallettes, menus and tools correctly sized as they are on the retina display Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see? There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light. MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
If "open in low resolution" is unckecked the appearance is good but the very small size.
See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

JSF - Read a text file and diplay lines of text data on the web page

Hello,
For one of my projects, I need to display lines of text data on the web page using Java Server Faces Technology. The raw data could be from simple text files or sockets or anything. (Getting the data is not my issue but displaying is). Could anybody send answers with sample code. In servlet, one could do this by -
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException{
PrintWriter out = response.getWriter();
out.println("<html>");
out.println(DATA);
out.println(DATA);
out.println("</html>");
I am looking for similar solution.
Thanks in advance
DK

Thanks mjolinor. Works great!
Two questions.
1. Could you plz suggest how this could be modified so this code would read the file in or accept it from the pipeline instead of wrapping the (@' around the data?
2. Could you plz briefly describe some of the details of the code so I can further research and understand.
Thanks for your help.
Thanks for your help! SdeDot
1. It already reads in the file. The (@' .. '@) bits are just there to create a file using your test data to demonstrate that it works.
2. Not user what kind of "details" you want. There really isn't much there, and get-help on the cmdlets used should provide information on what's going on with them in that script.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, " The operation could not be completed. The system cannot find the path specified" Resetting preferences did not fix.

The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.

my os is windows 7. elements 12 worked fine for many months then save for the web stopped working

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

HD video compressed for the web

I was doing some testing trying to figure out the best way to compress the HD video I get from the Sony XDCAM HD for the web (streaming). I shoot in HD (1080/30P) because it's needed for our videos. The web streaming is secondary.
I would prefer to make the web videos .flv because it works best and most easily cross-platform. In the real world, the majority of users have Windows PCs, which made me hesitant to use h.264 (.m4v) because it probably would require the average user to download things they may not wan to. Nonetheless, it has to be viewable on all computers in all browers.
So, I took three 10 second clips of steady camera video with audio from the camera that I used in all tests. I will refer to them by clip number...
Clip 1: 30P 16:9 High quality, 10sec=45mb
Clip 2: 30P 16:9 Low Quality, 10sec=24mb
Clip 3: 60i 16:9 High Quality, 10sec=45mb
First I tested making FLV is Adobe CS3 Encoder using the High Quality (700) setting.
Test 1 used size 848x480 (16:9)
Clip 1: 1.3mb
Clip 2: 1.1mb
Clip 3: 1.2mb
Comments: Looked very crisp, audio was clean, slightly darker image than original on default settings
Test 2 used size 480x270 (16:9)
Clip 1: 1.2mb
Clip 2: 1.1mb
Clip 3: 1.1mb
Comments: Looked very crisp, audio was clean, slightly darker image than original on default settings
Next, I tested making .m4v using the h.264 iPod settings in Compressor.
Test 1 used size 640x370.
Clip 1: 240kb
Clip 2: 1440kb
Clip 3: 204kb
Comments: Image wasn't quite as clean as the Flash files, but still good. Much lighter/brighter than the Flash files also. Low Quality HD video had high file size... why? I don't know, but I don't shoot on LQ for things anyway.
Test 2 used size 320x180.
Clip 1: 160kb
Clip 2: 865kb
Clip 3: 865kb
Comments: Image wasn't quite as clean as the Flash files, but still good. Much lighter/brighter than the Flash files also. Low Quality HD video had high file size... also the 60i file...why? I don't know.
In conclusion, I'm lucky that I shoot 30P since it worked well in all areas. The h264 codec provides a much smaller file size than Flash, with a good image. Amazing considering we started with a 45MB clip. What are the standards for aspect ratios for putting 16:9 video on the web? I haven't heard much set in stone like you have for 4:3 video. Nonetheless, the 640x360 or 480x270 seem to be a nice size for most uses.
I have heard that in Flash 9 you can chance the m4v extension to flv and it will work. IF that is true, that would be great because now my concern is that a base Windows PC cannot play these .m4v images without plugins/codecs. I suppose right now its a tradeoff between smaller file size/less compatibility with h264 or larger file size, great compatibility with Flash.
Any comments or suggestions to help out would be great. I typed this fast so forgive me if I left out any important info.

Hi APPLE27:
One comment from your post that immediately caught my attention was this, "Nonetheless, it has to be viewable on all computers in all browsers."
Unfortunately, it is unrealistic to expect one digital video file to be viewable on "all computers in all browsers" as there are simply too may variations in both hardware and software.
A common approach when offering digital video is to provide two formats to choose from and then within each of those two formats a few versions of the video for different bandwidths.
For example, a web site might offer Video for Windows and QuickTime. For each of these, there would be a low bandwidth Video for Windows file and QuickTime file and a high bandwidth Video for Windows file and QuickTime file (four files total). Of course, there's also Flash Video, Real Video, MPEG1, and so on.
For better or worse, YouTube.com has allowed video content creators the realistic expectation of creating a digital video file that is viewable on "most computers". But, the video is unavoidably tied to that web site.
When it comes to online distribution of video, it's still very open ended.
Also, computers are not all that's out there. Mobile devices are a huge market and you'd be hard pressed to create a single digital video file that will play on all mobile devices (iPhone, iPod Touch, Palm Treo, Sony PSP, etc.) either from local storage or from a mobile browser.
QuickTime offers a solution for creating a referencing movie - one file that links to other digital video files, but it too is imperfect at best when it comes to reaching the broadest audience possible.
With my few comments here, I'm just scratching the surface. But, it all starts where you are right now: caring about the image quality when exporting from your edited master.
-Warren

Exporting FCP 16:9 to QT for the web in 16:9?

Hello everyone,
I recently began doing my projects in 16:9 mode. I shoot them with my GL2's in 16:9, then capture to FCP as usual. FCP then automatically recognizes the 16:9 footage and adjusts everything perfectly for me. I figured out how to get the footage to DVDSP by 'forcing letterbox'. This plays the true 16:9 footage on a widescreen TV perfectly.
Now, I've come to another bridge that I can't seem to cross... that is... exporting the video to QT for the web in 16:9. I did a lot of searching here and all of the topics related to this did not help me at all. So, what I'm going to do is explain what I used to do when I shot in 4:3 mode:
1. In FCP... File>Export>QT Conversion
2. Format: QT Movie> Options
3. Settings> Sorenson Video 3
4. Frame Rate>15
5. Key Frames: Every 150 frames
6. Compressor> Medium
7. Data Rate: Automatic
8. OK
9. Sound>Settings>Mpeg-4 Audio, 16bit, Stereo
10. OK
11. Prepare for Internet Streaming> Fast Start
12. OK
13. SAVE
This usually turns a full sized 5 minute clip into a nice little presentation for the web no larger than 35 or so MB's. You can see a boat load of files like that on my website at (www.buerhausdesign.com).
Now, what I want to do is get a similar sized video for the web, only in 16:9 as I'm now shooting and editing in 16:9.
Does anyone have step-by-step instructions on how to do this? I know it's possible as I see movie trailors in 16:9 all the time in QT.
Any help would be appreciated:)
Matt

Nope, tried all of that. It stretches the image way beyond 16:9. Currently, if I export as a 4:3 file, the widescreen displays correctly, but I get two black bars at the top and bottom of the frame. Manually sizing to a 16:9 size, to say 720x404, stretches everything... including the unwanted black bars.
When I export to DVDSP, the black bars go away when I 'force letterbox'. There's gotta be a way to get it to work in QT.

Saving JPG to PNG using Save for the Web

Morning
I came across Paul Riggott's script for saving PSD to PNG which I changed to JPG to PSD.
The only problem with this is that the file size in most cases is larger than the original.
Is there a way to do a save as for the web as well?
Here is the original code:
#target photoshop
var imageFolder = Folder.selectDialog("Select top folder to process");
var folderList=[];
if (imageFolder != null) {
processFolder(imageFolder);
folderList.unshift(imageFolder);
createPNGfromJPG(folderList);
function createPNGfromJPG(folderList){
for(var a in folderList){
var fileList = folderList[a].getFiles ("*.jpg");
   for (var z in fileList){
    var file = fileList[z];
    open(file);
    var Name = fileList[z].name.replace(/\.[^\.]+$/, '');
    var saveFile = File(decodeURI(fileList[z].path+"/"+Name+".png"));
    SavePNG(saveFile);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
function processFolder(folder) {
    var fileList = folder.getFiles()
     for (var i = 0; i < fileList.length; i++) {
        var file = fileList[i];
if (file instanceof Folder) {
folderList.push(file);
       processFolder(file);
function SavePNG(saveFile){
    pngSaveOptions = new PNGSaveOptions();
    pngSaveOptions.embedColorProfile = true;
    pngSaveOptions.formatOptions = FormatOptions.STANDARDBASELINE;
    pngSaveOptions.matte = MatteType.NONE;
    pngSaveOptions.quality = 1;
pngSaveOptions.PNG8 = false;
    pngSaveOptions.transparency = true;
activeDocument.saveAs(saveFile, pngSaveOptions, true, Extension.LOWERCASE);
Any help or support to head me in the right direction would be appreciated.
Iain

This uses "Fitimage"....
#target photoshop
var imageFolder = Folder.selectDialog("Select top folder to process");
var folderList=[];
if (imageFolder != null) {
processFolder(imageFolder);
folderList.unshift(imageFolder);
createPNGfromJPG(folderList);
function createPNGfromJPG(folderList){
for(var a in folderList){
var fileList = folderList[a].getFiles ("*.jpg");
   for (var z in fileList){
    var file = fileList[z];
    open(file);
    var Name = fileList[z].name.replace(/\.[^\.]+$/, '');
    var saveFile = File(decodeURI(fileList[z].path+"/"+Name+".png"));
    FitImage(640,640); //Resizes to the longest size
    //FitImage(128,128);
    savePNG8SFW(saveFile);
    app.activeDocument.close(SaveOptions.DONOTSAVECHANGES);
function processFolder(folder) {
    var fileList = folder.getFiles()
     for (var i = 0; i < fileList.length; i++) {
        var file = fileList[i];
if (file instanceof Folder) {
folderList.push(file);
       processFolder(file);
function savePNG8SFW(saveFile) {
    var desc8 = new ActionDescriptor();
        var desc9 = new ActionDescriptor();
        desc9.putEnumerated( charIDToTypeID('Op '), charIDToTypeID('SWOp'), charIDToTypeID('OpSa') );
        desc9.putEnumerated( charIDToTypeID('Fmt '), charIDToTypeID('IRFm'), charIDToTypeID('PNG8') );
        desc9.putBoolean( charIDToTypeID('Intr'), false );
        desc9.putEnumerated( charIDToTypeID('RedA'), charIDToTypeID('IRRd'), charIDToTypeID('Sltv') );
        desc9.putBoolean( charIDToTypeID('RChT'), false );
        desc9.putBoolean( charIDToTypeID('RChV'), false );
        desc9.putBoolean( charIDToTypeID('AuRd'), false );
        desc9.putInteger( charIDToTypeID('NCol'), 256 ); //Number of colours.
        desc9.putEnumerated( charIDToTypeID('Dthr'), charIDToTypeID('IRDt'), charIDToTypeID('Dfsn') );
        desc9.putInteger( charIDToTypeID('DthA'), 100 );
        desc9.putInteger( charIDToTypeID('DChS'), 0 );
        desc9.putInteger( charIDToTypeID('DCUI'), 0 );
        desc9.putBoolean( charIDToTypeID('DChT'), false );
        desc9.putBoolean( charIDToTypeID('DChV'), false );
        desc9.putInteger( charIDToTypeID('WebS'), 0 );
        desc9.putEnumerated( charIDToTypeID('TDth'), charIDToTypeID('IRDt'), charIDToTypeID('None') );
        desc9.putInteger( charIDToTypeID('TDtA'), 100 );
        desc9.putBoolean( charIDToTypeID('Trns'), true );
        desc9.putBoolean( charIDToTypeID('Mtt '), false );
        desc9.putInteger( charIDToTypeID('MttR'), 255 );
        desc9.putInteger( charIDToTypeID('MttG'), 255 );
        desc9.putInteger( charIDToTypeID('MttB'), 255 );
        desc9.putBoolean( charIDToTypeID('SHTM'), false );
        desc9.putBoolean( charIDToTypeID('SImg'), true );
        desc9.putBoolean( charIDToTypeID('SSSO'), false );
            var list3 = new ActionList();
        desc9.putList( charIDToTypeID('SSLt'), list3 );
        desc9.putBoolean( charIDToTypeID('DIDr'), false );
        desc9.putPath( charIDToTypeID('In '),File( saveFile) );
    desc8.putObject( charIDToTypeID('Usng'), stringIDToTypeID('SaveForWeb'), desc9 );
    executeAction( charIDToTypeID('Expr'), desc8, DialogModes.NO );
function FitImage( inWidth, inHeight ) {
if ( inWidth == undefined || inHeight == undefined ) {
alert( "FitImage requires both Width & Height!");
return;
var desc = new ActionDescriptor();
var unitPixels = charIDToTypeID( '#Pxl' );
desc.putUnitDouble( charIDToTypeID( 'Wdth' ), unitPixels, inWidth );
desc.putUnitDouble( charIDToTypeID( 'Hght' ), unitPixels, inHeight );
var runtimeEventID = stringIDToTypeID( "3caa3434-cb67-11d1-bc43-0060b0a13dc4" );
executeAction( runtimeEventID, desc, DialogModes.NO );

HT5182 How can I convert Raw images from iphoto to jpg for the web?

I have some pictures in Raw mode stored in my Iphoto that I need to convert in JPG for the web and to print in business cards, I have been going around e-mailing the pictures to myself in large or medium size and then saving them again to my iphoto. Is there a way to do this from iphoto directly?

iMac (24-inch Early 2009), iOS 6
Are your pictures on your iMac or on an IOS device?
On your iMac use "File > Export " set the jpeg quality and size you want:
Regards
Léonie
Sorry, Ralph, I see, we have been cross posting

Problems with PSE 10 when saving for the web.

I'm having problems saving for web with PSE 10. I edit in RAW, edit in PSE 10, save as Jpeg, resize and save for the web. Results are muddled and not sharp (looks cartoonish). Also, there is no metadata when you look at the image properties. I uninstalled the program and installed again. No change.

Are you resizing the photo before save for web?
What settings are you using in the save for web dialog for the jpeg quality?
If you compress the jpeg too much (low quality settings below 60), that can make your photos look bad.
And save for the web in pse 10 automatically strips any metadata in order to keep the file sizes smaller.
Also, the save for web in pse 10 has a bad habit of not remembering your last used settings, so it's good to verify that your actually set to jpeg instead of the default GIF setting.
Message was edited by: R_Kelly

Saving a pdf doc optimized for the web

i am trying to find out if there is a way to set the subject and keyword fields before saving as a pdf.
What i am trying to achieve is that the pdf is optimized for the web, so search engines can read the pdf document for keywords etc.
Thank you

Inspector > Document > Info
Peter

Best way to save HQ video for the web?

What´s the best settings for great video-quality for the web?
I have a 5 min long clip I´d like to put on my website.
I would like it to be 480x360 and with good quality. It´s ok if the file gets 30-40 MB.
I have tryed the Expert Settings, Quicktime Movie, Broadband - High, but the movie gets "striped".
What´s wrong?
A lot Mac OS X (10.4.8)

Hi Magnus40,
I'm not sure what you are doing to create this problem. I create web movies all the time and have never had this problem, although, I never use the advanced settings cos I have never had to. When you go to the Quicktime export pane in iMovie you have the quality choices from full quality to web. When you select one of these it gives an estimate of the file size. For that length clip you should not need to use any setting besides full quality. I'd say the problem is coming from the 480x360 aspect ratio. This is what is compressing the file. Have you tried exporting it as full quality and then uploading it? The only problem you face by doing this is, it will take a long time for the movie to load on your website. For a short clip you may find that the CD ROM setting is sufficient.
Good luck.
SR

Is Hoefler Text safe for the web?

Similar Messages

Maybe you are looking for