Is it a BUG?, or this can be solved?
The Issue:
Basically I developed this particular site with Muse and I am using Business Catalyst for CRM and E-Commerce,
I am using many custom javascripts and CSS to do many of the functions missing in Bc,
most of these styles and scripts run in the header of the document, so...
I made a content holder that deals with all of these scripts and CSS, and placed it in the Master-A Header (Muse).
the site was working fine for a a couple of weeks, then the client wanted to change something in the design, so I had to use Muse again to re-publish the site, then the issue started:
The site shifted to the right and for few days couldn’t figure why until I published the site locally and saw the content of the Content Holder from Bc is taken a space at the left side of the page,
Therefore, when publishing the site to Bc it counts for that and pushes the site to the right.
After sending the file to support and few emails, I got this message from the support team:
I can see that you are using custom scripts and JQuery inside {module_contentholder,212337} content holder and when you place these scripts in header then it is breaking the site code.
Unfortunately, HTML / CSS / JavaScript and Site implementation related issues are outside the scope of our support boundaries. However, you may like to post this on our support forums as well, where a member of our helpful community may be able to assist –
Any help will be appreciated.
Hi Brad
The changes to the file is not done outside of Muse, I know by touching Muse's files from BC will screw things up,
rather it is done from Muse itself by going to the page properties and entering an html code in the header of the page.
Also maybe I should'nt said Locally Published, I meant when exporting the html and viewing it locally.
Regards
Similar Messages
-
I am unable to add more links to my Curah -Microsoft UserVoice sites.
https://curah.microsoft.com/67719/microsoft-uservoicecom-sites
I have tried updating the Curah from different browsers.
I have tried only updating the required fields.
Curah's are quite simple, so I'm not sure what to try next.
Any ideas?
Darrell Webster | webster.net.nz | Twitter/@DarrellCWebsterThanks for the reply. I expect you will have a problem reproducing the issue, if you're trying it by creating a new Curah. The problem isn't with creating new Curah's. It's updating this existing one.
I have deleted the onenotedev link and tried to save / publish. It still wont do either.
It looks like I'll have to recreate the Curah, which presents it's own problems.
Will the name still be available or will it need to go through a delete and purge process?
What about all the stats and people following the Curah?
Darrell Webster | webster.net.nz | Twitter/@DarrellCWebster -
My iTunes playlist page on PC is frozen and I cannot connect to store for purchase. I missed an iTunes update download this week and I don't know if this would fix a bug. How can I recover this download to have the latest update.
It would be best to post this question under iTunes category. I am sure there are a few people having the same type of problem.
-
trying to delete unwanted songs in my wish list, but they re-appeir 1 second after klicking on the X again, how can I solve this bug?
This thread has some info that might help ya out -> iTunes 11.0.5 will not let me delete a song from my wish list.
-
Battery running down fast using Yosemite, running the latest update 10.10.2. I think there is bug in this update. Please help me out or is there a way can i switch back to mavericks and how
1. Check the cycle count of the battery against the rated life for your model. The battery may be due for replacement. If the power adapter is connected almost all the time, the battery may need replacing even though the cycle count is not too high.
2. Follow these instructions, or these for OS X 10.8 or earlier.
3. In the Energy Saver preference pane, uncheck the box marked
Enable Power Nap while on battery power
if it's shown (it may not be.)
4. You can also try resetting the SMC.
5. Make sure your system is up to date in Software Update.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service center. -
How can I disable the assistive touch programmatically ? This is like a bug. Though the Guided access is enabled a user can take screenshot of my application content. How can I solve this ? any idea ....
Question: Do you think the response from the support staff is correct? I mean, surely, I can't be the only CF user on a shared box whose other users need to modify the date and time within their applications. Even if they do it at the application level for their domain, surely it wouldn't affect mine, would it? That was what was implied by the support people, but I have a feeling they are way off, or covering for some goof-up on their end. I struggled like hell yesterday trying to get this to work and I did not get very far at all.
I found an interesting tutorial here which does a comparison of time zones and, theoretically, this might do the trick. But if what the guy told me was nonsense then I won't bother with it. For the record, our calendar has been working fine for about a week now. -
Report a bug, if this problem is not solved, p2p of rtmfp will not be of much use
Recently, we have several clients on a p2p application, but we use the development version to test, two-way voice and video connection is not successful, several customers of the network environment is as follows:
First of all, there is no firewall;
These networks have in common is:
After an optical access, the subnet with a lot of routers, one by one, and some series, some parallel, some in series and then parallel, and some in parallel then in series, in short, they can be online, and then not the same segment of the computer, p2p connection is not successful, and other computer connection is not successful, and some also use the vpn.
Analogy: 192.168.5.10 and 192.168.10.10 to connect not, 192.168.5.10 and 192.168.5.11 is ok, is 192.168.5.10 may be outside the network of other computers can connect to, but 192.168.10.10 possible and other computers outside the network connections are not.
Hope you solve this problem as soon as possible, because rtmfp too expensive, otherwise p2p applications, are generally large companies (schools, government) affordable, and their networks are very complex, they do not take, you will no client .
My English is not very good, google translation
I gave you a bug report so long, how did not care for me ah;
This forum nobody, or you did not test this bug, you do not have time to correct this bug;
Either we modify not the flash player platform to the bottom of things, I will not give you advice.
In fact, standing on a technical point of view to think that I have is to use a socket network communication can be OK, network barrier, it is not.
But would like the user's perspective, I can be normal to the Internet, other p2p communications software, I can, on this thing, impossible, it is this software not work, so that this bug is that we must solve the .
I am very concerned about this issue every day and came to see nobody replies, I think this problem, I think, to solve this problem, you can proceed in two ways:
1.dns
I think it may be able to solve this problem, dynamic dns,
The idea is: to allow users to connect to the server, the user computer first upd listener (that is, iis services), then farid + domain to form a secondary domain name server dynamically to resolve the domain name to the user's computer, in a timely manner to refresh dns.
In this way, the user's computer, there is a fixed identity.
2 gateway
From users within the LAN to solve this problem, it can only proceed from the gateway.
For example, to use arp and other means to get to the router, where each segment ip then ip, similar to the route command to specify more than one gateway to the user's computer may be able to solve this problem.
In theory, these two methods may be feasible.
We also expect a new solution, I do not know Daoxing not
Speak before this program, take a look at our test for RTMFP p2p network topology, and the test results (explain, test, do not open the firewall and router are not set up static routing).
Computer A, computer B - "router A -" server S
The above NetConnection.Connect.Success 95% NetStream.Connect.Success 5% NetStream.Connect.Fail
Computer A - "Router A - servers S" - routers B - Computer B
Above, NetConnection.Connect.Success, NetStream.Connect.Success
Computer A - "Router A - servers S" - router B - routers C - Computer B
Above, NetConnection.Connect.Success, 50% NetStream.Connect.Success 50% NetStream.Connect.Fail
(Computer A - Router A, computer B) - router B - server S
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" router B - server S "- Router C" - router D "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
Computer A - "Router A -" Router B - "Router C -" server S "- Router D" - Router E "- computer B
Above NetConnection.Connect.Success, 100% NetStream.Connect.Fail
See the above test results, is not very bad, the key is FMS4.5 sell 450,000 RMB in China, their own software does not do a good job, but also to sell such a high price in China, a man named QQ. The above test environment, all 100% NetConnection.Connect.Success 100% NetStream.Connect.Success, free, QQ has more than 100 million users, QQ companies rely on advertising to make money game.
Seems to digress, huh, huh.
The test results, 100% NetConnection.Connect.Success, and NetStream.Connect.Fail the main reason is because the route connected in series or more than two or two and then caused.
From a technical perspective, as a packet travels through a number of the NAT router default all packets can be out, new packets can not be into the second layer of the router caused.
Find the reason, we think of a countermeasure to solve this problem from the software itself.
The last case of the above test environment, for example:
When computer A and server S NetConnection.Connect.Success computer B with the server the S NetConnection.Connect.Success, computer A to Router D sends an upd packets, not because the router can only broadcast the data packet to computer B, so 100 % NetStream.Connect.Fail.
The 100% NetConnection.Connect.Success, if we can NetStream.Connect, and NetConnection.Connect connected together, is not can be 100% NetStream.Connect.Success?
In other words, no matter what circumstances, computer A and computer B can and server S connection is successful, the other way round, that is, the server S and the Computer A or Computer B can connect.
We can not let the computer A or computer B, pretending to server S (In theory, called NAT, technically speaking, is to modify the source ip of the packet header and source Mac server S, and parity), the router not in the NAT, and other communications.Hi Mr. Wog,
My guess is that once you see an estimate for replacement for hundreds of dollars, those scratches won't look too bad anymore. There are products to cover the outer casing, and some people put stickers on, or even paint (I don't recommend either, but ymmv). Good luck. -
Does anyone know how to change where incoming (via mail) calendar requests go on my MacBook? Mine insist on going to Entourage, which I don't use any more. I've tried setting the default calendar in iCal preferences. Doesn't help. Bugs me. Can you help?
Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter? -
I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem
I would also like to know the answer to this. I am having the exact same problem.
-
This can't be right - can't display time part of a DATE field.
Hi all,
I have a table with one DATE field. It wasn't displaying times with the date,
so I searched and found a post telling how to change my NLS settings
in the Preferences.
I did this and it didn't change, so I thought, OK, I'll shut it down and restart.
Still no. So, I shut it down again, deleted all the records form my table, reinserted
them and then restarted SQLDeveloper.
Despite the fact that it has retained the change in NLS settings, it STILL*
doesn't display the time.
There is no problem in SQL*Plus. Quite frankly, this is poor.
Paul...>
Would there by anything else - I'm planning on rebooting the machine this afternoon - maybe
that'll do the trick? Will report back.Now, this is still wierd! Have rebooted machine.
I have two tables Sysstat_ext and Sysstat - both have fields M_Time (Measurement time),
which is VARCHAR2(15) in Sysstat_ext and DATE in Sysstat.
Sysstat_ext is an external table pointing at a .csv file where the dates are strings (obviously) in
the format DD-MM HH24:MM:SI (i.e. 01-09 13:55:02).
I then insert the data from Sysstat_ext into Sysstat - the conversion being performed thus:
INSERT INTO Sysstat
SELECT ROUND(TO_DATE (Sysstat_ext.M_Time, 'DD-MM HH24:MI:SS'), 'MI') AS "Measurement Time",
<.. other fields deleted>If from SQL*Plus, I select M_Time from Sysstat
SQL> select M_Time from Sysstat;
M_TIME
2011 09 01 00:00:00
2011 09 01 03:20:00perfect
same for Sysstat_ext
SQL> select M_Time from Sysstat_ext;
M_TIME
01-09 13:55:02
01-09 14:00:01No year - the conversion during the insert obviously implicitly gives this year (good job that's what I actually want!).
I look at the dates in SQLDeveloper
Systat_ext: 01-09 13:55:02 <====== exactly what I'd expect
Systat: 01-SEP-11 <====== where has my time gone?
Anyone care to shed some light on this?
So, I redid the whole procedure removing the ROUND and also the AS "Measurement Time" (in case of artefacts)
INSERT INTO Sysstat
SELECT TO_DATE (Sysstat_ext.M_Time, 'DD-MM HH24:MI:SS'),
<... deleted...>
Still the same result - Sysstat_ext shows the time and Sysstat doesn't. I would have expected the
opposite. SQL*Plus still shows a time with Sysstat.
This is definitely a bug IMHO. Can I report it anywhere? As an aside, I originally thought that 3rd party tool
manufacturers such as Quest and Allroundautomations would be quaking in their boots with a
tool like SQLDeveloper (for free*) coming from the manufacturer of Oracle itself - I see now that
at the moment, they have little to worry about.
Paul... -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
Dear all,
I am new to this community even though I have been a Apple user for years, so please forgive me if this question is not in the right section.
Has anyone encountered drastic shorter battery life both on iphone 5 and ipad since updating to iOS 6.1.2? I've always been happy with these two products until the update - now the battery life is considerably shorter which is extremely frustrating.
How can this problem be solved? Is there any way to go back to the previous version?
Thanks for your help.If you update using iTunes the phone is first wiped clean, then the new OS is installed, and finally the backup is restored. After this finishes if you sync your music should be restored. Music is not in the backup, because it is already on your computer and duplicating it would use up a lot of hard disk space.
An OTA update just patches what has changed; it does not disturb content. -
I changed my Apple ID to my new email address successfully for the iTunes and App store but it won't work for iCloud and it won't recognize my password. I read that this can't be done. How am I supposed to get into iCloud? I plan on getting rid of my old email address which is my old Apple ID so how is that going to work?
Same question Wish someone had replied!
I changed my Apple ID to my new email and now cannot find any way to access icloud. Unfortunately I had allowed icloud to hijack my airbook files, so of course I am afraid I will lose them tomorrow when I exchange my iphone for a new one and cannot keep an icloud account i cannot access. What a poor sync system! Really atypical for apple! -
I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?
Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi
Maybe you are looking for
-
Hi Friends, I am facing problem while saving the excise invoice... please help me..... Error: No account was specified for account type "S" in item "0000000001" of the FI/CO document. with regards
-
Can't get RescaleOp to retain transparancy (it sets alpha to black)
Got my code here, the operation fills in the transparancy with black: public static BufferedImage brighten(BufferedImage bi) { RenderingHints hints = new RenderingHints(RenderingHints.KEY_COLOR_RENDERING, RenderingHints.VALUE_COLOR_RENDER
-
HT201730 Dock Ions Bring Up Applications Window In Finder
Sometimes one or more icons in the Dock get wonky. When I click on certain icons the Finder window pops up with that Icon highlighted. Right now it' Safari, but not always. If I reboot it goes back to normal. At least for a while...
-
10.4.3, Is it stable yet for Software Update?
My Mac clients are waiting for me to tell them if I have upgraded to 10.4.3 from 4.2. I have not. Still reading all the horror stories and wonder if I have missed the "good" stories, where a PBG4 had NO problems upgrading. Has Apple addressed all the
-
Hello All, As per my understanding, I thought Proforma Invoices dont flow to COPA, but when tested, they were flowing to COPA, with record type F (ofcourse no FI accounting). Let me know your thoughts on it, implications of this. One Implication - Pr