Is it a problem if the fans are in "airplane mode" for a long time?

OK, have another quick question about my G5 Quad:
Occasionally (like 2 or 3 times a year), my Quad fans will go into "airplane mode" - I don't know if it's from a failed boot or what (though a hard restart clears the problem), but my question is regarding if it is a problem if it stays in "airplane mode" for a long time. I can't find anyting on the www about this (though LOTS of complaints on the "airplane" problem). I wouldn't "think" that it would be a problem as the fans spinning up are supposed to protect the computer, but I wonder if my assumption is correct.
The reason I ask is because the Quad sits in the basement, and I can't hear it unless I walk down there (which is one reason it's in the basement - heat being the other...). If the computer freezes or fails to reboot, I may not notice it right away (which has happened recently). It could sit with the fans running at max for several hours until I notice it. I hope this isn't a problem.
Thanks again
Richard

Biggest problem is power consumption.
The default action for the fans is high, which is meant to protect the components in the case of freezes, crashes, boot errors, etc.
I hope this isn't a problem.
Only if it becomes a common occurrence.
Then, you need to find the root problem.
Watch the LCS on the Quad. Though possibly less problematic than earlier models with LCS, it does use, nonetheless, a LCS.

Similar Messages

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

Anyone having any problems with the iPhone not holding a charge for very long?

I've had my iPhone since November 2014. All of a sudden in the last couple of days the phone's charge drops like a brick and by the end of the day it drops down below 20%. Up to now at the end of the day it had 60%+ of battery life left. I haven't changed anything to the phone. I tried an app and deleted it after I found it to be useless to me.
I had to turn on the location feature but turned it off as soon as I deleted the app that I removed.
Anyone have any ideas or has anyone run into this.
RFA

The phone goes on the charger at night every night and is at 100% when I am up. The only thing that I use it for is calls e-mail and an occasional Text. I don't; use for music or movies or anything like that. I do play solitaire on it but that hasn't been a problem up to now. I went in and googled the iPhone 6 for power save settings and it gave me a way to look at the Activity.
The only thing that was used that day was Solitaire. I turned off Cell access to Solitaire and it seemed to last a little longer. I just turned it back on to see what happens.
Ricardo

I am trying to convert PDF to word. With my PC I get a message "Error occurred while trying to access the service. It worked fine for a long time. Has been doing this for days now with all files i try to convert.

I am trying to convert PDF to Word with Adobe Export PDF on my PC. I get the message " error occurred while trying to access service". Has worked fine in past. Has been doing this for a few days now on all files i try to convert. Any ideas?? Thanks

Hi bert090909,
Are you trying to convert your files from within Adobe Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates. Earlier versions of Reader could cause the specific error that you're reporting.
Please let us know how it goes.
Best,
Sara

My wife and Iare newbies with iPhone 5s. (Should have waited for the 6.) I have usediTunes for a long time for my iPods, but now we both want to use the iCloud do access different music up there. Any help in doing that? If we can do it, we will be ad

I'm running iTunes on a PC laptop and ready to move music to an independent hard drive. We want to add more music to it. I have used iTunes for a while for iPods. My wife and I have new iPhone 5S and would like to access the cloud for different types of music, but I will maintain the music in the cloud. (That's my job.) Can 2 iPhones use the same iCloud? We each have different Apple ID's. Thanks.

Music in the cloud is managed by the separate iTunes Match service ($25/year US). You would sign up to it on the PC, and your music library would be matched with the iTunes Store, and high quality versions of all songs would become available to you on any device also signed into iTunes Match. You should not delete your local copy from the PC, since you should retain a master version of all songs for safety.
You can use the same iTunes Match service, but you'd see the same music (you say you "would like to access the cloud for different types of music", but I'm not sure what you mean by that).
Matt

Wireless problem since the "pros" are answering on June 2nd come and answer this

How is there not a recall for this line especially the older ones. Here is my justifiable reason and if anyone else has the same problems key in because the "pros" are looking for today and yesterday only. Then they can't deny that they don't know of any problems with this line.
Well let's begin.
     So you might not admit it buy you most definitely know that there are numerous problems with the tx1000 line. Multiple complaints about people not having wifi work. A little less that have constant BSOD. Some booting black screens. Fingerprint stops working etc.
     Well mine is wifi does not work. It hasn't been working since 2-3 years ago, just never got enough time to troubleshoot and complain.
     The problems are so widespread that there is even the "hair dryer" trick which I did not try. That is how widespread it is. Maybe you might know of another product that has a trick to it that involves a towel? Yeah that's right another product rid with problems, the Xbox 360. But unlike HP Microsoft has admit to their problems and have extended their warranty as well as refund people who have paid. .
     I have complained once every year to see if you finally have a recall but never do. I actually never troubleshooted using your steps before because I just didn't have the time. Well since now I have the time, I have decided to do some major testing. I have bought another laptop obviously not HP. It has a Intel 5300 AGN. So what good way to test than to do some swapping. Put in your broadcam wireless into my other laptop. In 2 seconds Windows Generic Drivers install and get it working. Put in Intel 5300 AGN in the tx1000. Um.... yeah doesn't even notice a new card was installed and still have the amber light. Play around installing drivers for it HP Wireless Assistant. Anything. Even updated the Bios. Nothing makes it work while on my other laptop it works perfectly fine. Not just the Intel 5300 AGN but the wireless card that was in the tx1000. What does this mean? It is a board problem which makes sense because the only reason why people could be losing fuctions one by one such as wireless, fingerprint read, SD card reader and come up with Black Screen booting and constant BSOD is a mobo problem. Why haven't HP recalled this line and treat their customers like customers? I don't know but with a move like this they put many previous customers to stop recommending them. I currently have 2 HP Desktops an HP Printer and this tx1000. The 2 desktops broke one way or another. Thankfully both still in warranty which they then are forced to repair. HP Printer works fine which is a miracle. Not a great printer though.
    By the way anyone know what the first result is for google when you type tx1000 and see the list. Drumroll......
-tx1000 recall
-tx1000
-tx1000 motherboard
-tx1000 specs
-tx1000 wireless card problems
-tx1000 problems
    What do you know don't you think its odd for this laptop that recall tops everything even tx1000 itself and tx1000 specs. Followed by motherboard probably people looking for a replacement motherboard. And after specs is wireless card problems that is guess what, the problem I have. Followed by the general tx1000 problems.
    Because of this I have stopped recommending HPs which I have recommended for a long time especially on the printer side. People ask me Dell or HP and I would tell them HP now I say do you have to choose between those two? If you do then go with Dell but ASUS are making some great laptops. For printers I have started recommending EPSON, which I just love their Artisan line.
    To show you how widespread this is I have attached a petiton which I did not start but I found.
http://www.ipetitions.com/petition/hp_tx1000_problems/
If you have problems with this line sign the petition even though I am 99% sure it won't do anything. But it will just show others what kind of company HP is. Better yet though reply to this on HPs own forum to show the problems of their tx1000 line
At the time of this posting there are 224 complaints and remember those are just people who found the petition and actually signed it thinking it would have done something. Most probably found it but didn't even bother because what would an online petition do right?
/end rant
Well if you read all this Thank You for your time I guess.
Haha tried to add problems to tags and they don't allow it. What is that?
Bunch of links to problems of same kind posted on HP forums.
http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks/Missing-WIFI-and-Increasing-Heat-from-tx1320us-t...
http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks/Why-is-there-no-TX1000-recall/td-p/140683
http://h30434.www3.hp.com/psg/board/message?board. id=Hardware&thread.id=5789
http://h30434.www3.hp.com/psg/board/message?board. id=Hardware&thread.id=1867
http://h30434.www3.hp.com/psg/board/message?board. id=Hardware&message.id=1867&query.id=631242#M1867
http://forums13.itrc.hp.com/service/forums/bizsupp ort/categoryhome.do?categoryId=411
http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks/TX-1000-does-not-start/td-p/169566

Hmmm lets see 3900 have signed the petition. At say $1500 for each computer. Thats about $585,000! I wonder how much the recall would cost? VS. http://www.youtube.com/watch?v=ctHTF3oNdxI HP Got your money that do not care about there customers or support. Best thing you can do is keep an eye out for a class action suit and try the penny fix.
http://www.classcounsel.com/news/hpzd.html
A Settlement was reached between Nvidia and HP however all the TX1000 owners get the shaft. HP another Big Business ruining this country!

HT202731 How do i know that the fans are working on my iMac

How do i know that the fans are working on my iMac

the back of the monitor get hot and i can't hear any fans working

My macbook pro keeps zapping me. even when the charger is not plugged in, my hands keep feeling tingly and the fans are running louder than usual

over the last two days since i updated my software, my laptop seems slower, the fans are running louder, and i keep feeling mild shocks (even without the charger). my hands feel really tingly and a little sore. what is going on?

cheesecakeyumm,
have you tried resetting your MacBook Pro’s System Management Controller? (I don’t know if that would have any effect against mild shocks, though.)

I have a Macbook Pro early 2011 running 10.7.5, does anyone know why it sounds like the fans are spinning really fast and loud. It's not like I'm using many applications at one time. Thank you.

Trying to see why the fans are spinning real loud and fast. I dont have a nearby Apple store to take it to and Bestbuy wants to overcharge you for a bunch of uncertified geek squad employees working on them. Any help? Thanks in advance.

Try resetting the SMC http://support.apple.com/kb/ht3964
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Problem on the configuration about creating an SPN for your CMS on a Window

I have some problem on the configuration about creating an SPN for your CMS on a Windows 2003 domain
My Environment:
Domain Controller and AD Server :SV01
Crystal Report Server: SV07
Domain Name: SVG.NTT.LOCAL
I created a domain user "BOUSER" in SV01
When type the following command in the SV01, it have not any response.
"SETSPN.exe u2013A BOBJCentralMS/SV07.SVG.NTT.LOCAL BOUSER"
And i cannot find the "Delagation" tab in the domain user property window.
Have any wrong in the command ?

Hi Tim,
Thank you for your reply.
We used Tomcat and MySQL database.
I have only integrating with AD and requiring manual logon.
I had created a bscLogin.conf file and krb5.ini file
krb5.ini file:
[libdefaults]
    default_realm = DNS.COM
    dns_lookup_kdc = true
    dns_lookup_realm = true
[realms]
DNS.COM = {
    kdc = SV01.SVG.NTT.LOCAL
    default_domain = SVG.NTT.LOCAL
bscLogin.conf file
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
And insert the following two lines in Tomcat's Java Tab
-Djava.security.auth.login.config=C:\WINDOWS\bscLogin.conf
-Djava.security.krb5.conf=C:\WINDOWS\krb5.ini
I also set Serivice Principal Name "bouser FQDN" in Crystal Report Server.
We can login in Central Management Console with our domain user.
But When we logon in InfoView with our domain user account.
It display the following error:
"Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again."
Any step i missed ?

HT3500 My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now th printer cannot be found when TimeMachine back ups are taking place. Does anyone know the cause & remedy please?

My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running. Does anyone know the cause & remedy please?

Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

Fans are running at 6000 rpm at all times.

Hello I´m from Germany an try my best to explain ;-)
in my MacBookPro2,2 Intel Core 2 Duo 2,16 GHz the fans are running all the time without stopping.
When I start the MacBook the fan start to run at maximum.
It is making me crazzy. Please help me. SMC Reset and cleaning the Fans and what ever else I did does not help.
I tried a tool to find out whats up?
Akkulader Nachbarschaft    51°C
Akkumulator    30°C
CPU A Nachbarschaft    39°C
CPU A Temperaturdiode    43°C
CPU Kern 1    40°C
CPU Kern 2    38°C
Grafikprozessor Chip 1    39°C
Hauptkühlblech 1    39°C
Hauptkühlblech 2    34°C
Hauptplatine    40°C
Linke Handauflage    31°C
SMART Festplatte FUJITSU MHW2120BH (NZ0ST6B2A4NB)    35°
Nothing is really hot?
Hope you can help me ;-)

Run the extended version of the Apple Hardware Test that you'll find on one of the DVDs that were shipped with your MBP. I expect AHT will report a SNS error, indicating that one of the temperature sensors in your machine has failed. When a temp sensor fails, the fan or fans usually run at top speed all the time as a precaution, in case the machine is overheating but the bad sensor is failing to report it.

How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

HI
I created a web application and configured rbs storage ,
I uploaded documents (for ex: 18 number)
after uploaded documents , and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
and also I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
select count(*) from alldocs
Select count(*) from AllDocstreams
but when I delete some docs from document library ,
1)the doc itself deleted from document library
2)when I check the rbs storage there is no number of files are decreased(its still 39 files ), its same as before doc deleted from doc library
after some time I found the number of files are decreasing from RBS storage folder in sql server,
here I want to know the how the files are decreasing from RBS storage after some time, where shld I check the settings for this? and how I control on it
here how I know the settings for cleaning up orphan BLBOS how these deleted BLOB
adil

1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
2. There is a RBS cleanup job which deletes files from RBS. for more info check
http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

I just rented a film using my apple TV and was then asked to enter a code - which I haven't been asked for in long time. I have forgotten the code. Any quick solutions to the problem?

Hello anetsa
It sounds like you have restrictions setup on your Apple TV. If you do not know your passcode to unlock it, then you will need to restore your Apple TV. Check out the articles below for more information about Restrictions as well as restoring your Apple TV.
Apple TV: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT200198
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Regards,
-Norm G.

Is it a problem if the fans are in "airplane mode" for a long time?

Similar Messages

Maybe you are looking for