Is it neccesary using certificate matrix data to use functions in R3?

Hi.
I create sap r3 471 ides version.
And try to connect via the iway(third party product to call function via the RFC).
When I try to connect r3, it says ID and password not correct.
And I use Tcode STRUSTSSO2, found certificate, ACL are blank.
If certificate and matrix are not neccesary,could you help me to solve this problem?
If the certificate and matrix are neccesary, which parameter need I configure to call functions in sap r3 4.71 ides via the RFC?
Thanks.

Hi,
I don't have knowledge about this third party software, but what my knowledge say is there must be proper mapping with SAP id and external ID.

Similar Messages

  • How to use a query in matrix data retrive

    hai  everybody
    how to use a query in matrix data retrive...
    pls ..

    If u have created a UDT to store the data then U can retrive the data through recordset.
    oRecordset.doquery("SQL Statement")
    If u have taken the DB Data source to Manipulate then
    then type
    oMatrix.flushtoDataSource
    then
    U can retrive the data through DB Data source.
    -Manmath

  • Is there a way to combine matrix data?

    If anyone can, please help me. Linear algebra is not my
    specialty.
    I am trying to make a function using the BitmapData.hitTest()
    to see if two sprites on screen are hit.
    I have got it working for sprites that are direct siblings
    (ie they are on the root stage layer). However, if I nest sprites,
    things get messy. The reason I want to test nested objects is so I
    can test for collision with *parts* of other visual components, not
    the whole thing as one.
    I can get a proper tx, ty value for nested sprites by using
    the localToGlobal functions, but these do not take into
    consideration rotation. Is there something like localToGlobal that
    works for an object's entire transform matrix (and if not, why
    not?!)?
    Does anyone have any advice?
    The only thing I can think of is to go through a given
    sprite's parents until it reaches the top (root) layer and collect
    the matrix data on the way. But even if I do that, I don't know how
    to add the matrices together properly. I am convinced I need to do
    this. If I don't use the actual transform matrix, I cannot take
    into account skewing, rotation, etc.

    Well, I seem to have found a way to at least combine matrices
    using the concat() method. Still, I have to cycle through each
    parent matrix from the target sprite to the top level (stage) to
    get a universal comparison.

  • Postal File Preparation Zone Matrix Date

    When uploading Mail.dat 09-1 and 11-1 files to PostalOne we have been getting a server side validation error and after several days of back and forth with PostalOne support, they say that the problem is a "0" in the Zone Matrix Date field of the .hdr file (position 731-738).
    From testing what it looks like is happening is that the original files do not have the 0 and that the Postal File Preparation program adds it.
    Currently, the users and/or tech support are having to open the finalzied files up and manually replace the 0's with spaces (which is rather bothersome and a little frustrating for the user when they make a mistake and have to export again).
    The questions that I have are:
    1. Is there a setting to change in PostPrep or field that we could clear so that the 0 does not get into the files ready for upload?
    2. Is there already a modification to PostPrep being worked on to resolve this issue?

    Yes, we are setting up the job correctly based on the release notes for 8.00c.08.00.
    Here is a little more detail of what was going on and how I came to the conclusion that I about Postal Prep not working for the CPT record:
    1. Ran Job with MB option set in Mailing Information section of Presort.
    2. Mail.dat files (opened in Text editor) look good.
    3. Users open in Postal Prep and make changes needed for scheduled trucking dates and other things.
    4. Using Postal Prep the users opens, edits, and save changes to the Component record.
    5. Mail.dat files (opened in Text editor) are missing the MB in field 282-283 is no longer there.
    6. So I had them go back into Postal Prep to the Compenent record to fix the problem, but the "Postal Price Incentive Type:" field's drop down list does not have an option for MB.

  • Add Matrix Data with UDO

    Hello,
    I´ve generated a simple form using SAP UDO Form Generator.  The problem that for the second line on, the Matrix data are not saved to the data base.  I´ve added code for the button add (oMatrix.AddLine()) and it´s possible to edit the cells.
    Why only the first line is saved ? What do I have to do ?
    I´ve also tried:  oMatrix.FlushToDataSource() and oDataSource.InsertRecord.
    Please help!
    Thanks a lot,
    Chrisitano Pegorer.

    Trinidad,
    I´m working on 2004 2B.
    There´s no error message.
    The form was generated by B1DO UDO Form Generator.
    The only code is oMatrix.Addrow(1) to insert the new line on the matrix.
    I´ve noticed that the Record Number is increased on the DBDatasource when a new line is added to the matrix.
    I think that the Update button ("1") should save the datasource into the database.
    The lines are brought ok and can be updated fine, so I think the bind is ok.
    And I can insert as many records as I want to, if the form is in Add mode (first time).  But once it´s inserted, a second try to insert more records (form in update mode) doens´t work anymore.
    Any ideas ?
    Thks!
    Message was edited by: Christiano Pegorer
    Message was edited by: Christiano Pegorer

  • Average Only Filtered Matrix Data

    Hi All,
    I am new to Reporting Services and I need help. I have a report that I have create below using matrix.
    This is the SQL Query result :
    YEAR    |          
    MONTH            
    |          
    OUTLET       |          
    QTY
    2014    |          
    7                     
    |          
    OUTLET A    |          
    25
    2014    |          
    8                     
    |          
    OUTLET A    |          
    25
    2014    |          
    9                     
    |          
    OUTLET A    |          
    50
    2014    |          
    10                   
    |          
    OUTLET A    |          
    75
    and this is the Report Design :
    Parameter  : Year : 2014
    Parameter  : Month : 10
    COLUMN     
    |                      
    MATRIX GROUP                        
    | COLUMN                
    OUTLET        |                      
    MONTH                        
    |          
    3 MONTHS
    |          
    7          |          
    8          |          
    9          |          
    AVERAGE   
    OUTLET A     |          
    25        |          
    25        |          
    50        |          
    33.33333333
    I use 2 Parameters, Year and Month. The matrix data group by Month, and in the column group properties I add three filters.
    1 Filter for Year ([YEAR] = PARAMETERS!YEAR.VALUE), and 2 others for Month ([MONTH] < CINT(PARAMETERS!MONTH.VALUE) and [MONTH] >= PARAMETERS.MONTH - 3), because I only want to display data from previous month to 3 months before. For example, if I choose
    Month 10, the matrix only display data from Month 7 to 9.
    How do I count the average (put in “3 MONTHS AVERAGE” column) from Month 7 to 9 only and not from whole data? Please Advice.
    Thanks,
    Santony

    Hi ,
    YOu can try below ;
    1. Select Matrix for this .
    2 .Row -> Outlet
       Column-> Month
       Data -> Qty
    3. Right Click on Column -> Insert column -> Outside Group Right
    4. Use  Avg(Fields!Qty.value) in this added column
    Use sql query for dataset
    Select * from table
    where DD.MONTH<@Month  and Year =@Year and Month >= month(dateadd(month,-3,getdate()))
    Design Structure:
    Output Screen
    Thanks
    Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

  • SSL certificate validation date

    Greetings,
    Why is it that on a SSL module, certificate validity dates are different when cheking
    "show crypto ca trustpoints" and
    "show ssl-proxy certificate-history" ?
    Doesn't the "certificate-history" show the current certificate as well the previously imported ones?
    Do we refere only to "show crypto ca trustpoints" to track certificate validity end date?
    SSL001#show crypto ca trustpoints testing123
    Certificate
    Subject:
    Name: testing123
    CN = testing123
    OU = Terms of use at http://www.verisign.com
    O = WWW
    L = WW
    ST = WW
    C = WW
    CRL Distribution Point:
    http://SVRIntl-crl.verisign.com/SVRIntl.crl
    Validity Date:
    start date: 00:00:00 UTC Apr 11 2006
    end date: 23:59:59 UTC Apr 10 2008
    renew date: 00:00:00 UTC Jan 1 1970
    Associated Trustpoints: testing123
    SSL001#show ssl-proxy certificate-history service proxyssl
    Record 132, Timestamp: 3w6d, 21:34:55 UTC May 23 2006
    Installed Service Certificate, Index 131
    Proxy Service: proxyssl, Trust Point: testing123
    Validity Start Time: 15:31:50 UTC Nov 15 2005
    End Time: 15:31:50 UTC Nov 15 2006
    Renew Time: 00:00:00 UTC Jan 1 1970
    Thanks

    To authenticate the SSL client, the SSL module verifies the following:
    * The certificate at one level is properly signed by the issuer at the next level.
    * At least one of the issuer certificates in the certificate chain is trusted by the SSL proxy service.
    * None of the certificates in the certificate chain is in the certificate revocation list (CRL) and rejected by any access control list (ACL).
    For verifying the SSL client certificates, the SSL module is configured with a list of trusted certificate authorities (certificate authority pool). The SSL module trusts only the certificates issued by the certificate authorities that you configure in the certificate authority pool.

  • Error in Data selection in R/3 Generic Extraction Using function Modules

    Hi Friends,
    I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and  the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
    When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA  all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
    data selection successfully started
    Data selection successfully ended
    All Data packets completed.
    are showing in red.
    after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
    it is giving this message wir no RSM 78.
    Please let me know it

    Hi Jerry,
    Thanks for the immediate replay
    But here in my source system job is getting terminated.
    this is the status of job in Job logs.
    the job is running till this step not going ahead.
    Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records 
    Result of customer enhancement: 157 records                             
    Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records     
    Result of customer enhancement: 157 records                             
    Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
    pl. update me if any idea.

  • Creation of Generic Data source using function module based on the program which was used to created ABAP report

    Hi,
    We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
    Thanks,
    Ravi

    Hi,
    Step1-Create a table structure which you need to create same as the fields you require in you data source.
    Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
    Step 3-create infoset query.In the infoset query give your table structure name and  program name which you developed.
    Step4-create data source on top of that query

  • Using functional global variables to transfer data between touch screen device and other targets

    Hi,
    We are currently developing a control system that will operate on a cRIO with a touch screen interface. During development we have been using functional global variables (FGVs) to handle most of the settings/data etc, however we have just realised that we may have an issue updating the data on the touch screen, and vice versa.
    Previously we have implemented similar programs using shared variables, however we were wondering if there is anyway to implement FGVs in a similar manner, whether it'd be a combination of FGVs and shared variables.
    Regards,
    Mike
    Software version: Labview 8.2.1

    See this thread on LAVA about sharing FGV's across projects. THis should be extendable to cross paltforms (I believe).
    You also may want to concider an upgrade to LV 8.5.1. We have found a number of performance related issues with LV 8.2.1 and RT.
    If you decide not to upgrade, just remeber what I wrote (above) when you have reason to question the performance.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Generic Data Extraction From SAP R/3 to BI server using Function Module

    Hi,
    I want step by step procedure for Generic Extraction from SAP R/3 application to BI application
    using Functional module.
    If any body have any Document or any PPT then please reply and post it in forum, i will give point for them.
    Thanks & Regards
    Subhasis Pan

    please go thr this link
    [SAP BI Generic Extraction Using a Function Module|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/sap%20bi%20generic%20extraction%20using%20a%20function%20module.pdf]
    [Generic Data Extraction Using Function Module |Re: Generic Data Extraction Using Function Module;

  • In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

    In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

    When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
    Jason

  • Data transfer of Selected sets (QS51) using Function modules

    Hi All,
    I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field  RQSKT-AUSWAHLMGE is not present on screen 1000..  In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE  and QPAM_SELECTED_SET_CREATE
    The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
    QPAM_SELSET_CODE_CREATE contains fields  KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
    Runtime:        6.496 Microseconds
    Exception       WRONG_KEY
    Message ID:          QS                         Message number:           299
    Message:
    No entries were found in catalog 1
    MAN WERK K AUSWAHLM CODEGRUP CODE
    300 WI10 1 DDTEST   THREADS  1
    QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?

    Note 381286 - Code grps + selectd sets:Transport request requestd
    Note 592418 - Composite SAP note: Transport of code groups and codes
    But I do not recommend a modification because the system does not generate request for that in the production system.
    This means you can maintain catalog directly without transport in the production system.
    Only development or test system ask you a request number.
    Regards
    Luke

  • How to extract data by using function module in generic extraction please

    how to extract data by using function module in generic extraction please  give me steps  required

    Dear Deba,
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
    Chk these
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
    check the following thread
    generic extraction with function module
    Generic Extraction with function module
    Regards,
    Ram.

  • How to extract the data by using function module?

    hi experts,
    what are the steps i have to fallow to extract the data from R/3 by using FUNCTION MODULE.
    thanks & regards
    venkat

    Hi,
    Extracting data from R/3 extract structure thru function modules
    You can proceed with create function module using SE37, thereu2019s sample in system RSAX_BIW_GET_DATA_SIMPLE,
    You need to know the logic how to populate the structure,
    after that RSO2, create datasource specify extract structure and
    function module,
    activate and replicate to bw.
    Chheers
    Raj

Maybe you are looking for