Data transfer of Selected sets (QS51) using Function modules

Hi All,
I am doing data migration of Selected sets (TCODE QS51) using function module. I have tried using BDC recording but it is not working in background.In foreground it is giving information error on second screen as field RQSKT-AUSWAHLMGE is not present on screen 1000.. In foreground I am pressing enter after this error its working fine but in background the execution stops there. So I am trying function modules QPAM_SELSET_CODE_CREATE and QPAM_SELECTED_SET_CREATE
The fields in template I have are KATALOGART(Catalog), WERKS(Plant),AUSWAHLMGE(Selected set) ,KTX01(short text), STATUS(status),CODEGRUPPE(code group), CODE (code), KURZTEXT (short text for codegroup),BEWERTUNG(Valuation code), FEHLKLASSE(Defect class)
QPAM_SELSET_CODE_CREATE contains fields KATALOGART, WERKS,AUSWAHLMGE ,CODEGRUPPE,CODE which I need and While stand alone testing of this function module I am geting error as follows with the data filled :
Runtime:        6.496 Microseconds
Exception       WRONG_KEY
Message ID:          QS                         Message number:           299
Message:
No entries were found in catalog 1
MAN WERK K AUSWAHLM CODEGRUP CODE
300 WI10 1 DDTEST   THREADS 1
QPAM_SELECTED_SET_CREATE contains KATALOGART , WERKS,AUSWAHLMGE , KTX01 which I need and it requires Language key fiels KSP01. I specified it it executes successfully but in transaction it is not there. some FMs contain some fields and not all fields so I want to know which one to use ? Can anyone give me sample code how to use these FMs?

Note 381286 - Code grps + selectd sets:Transport request requestd
Note 592418 - Composite SAP note: Transport of code groups and codes
But I do not recommend a modification because the system does not generate request for that in the production system.
This means you can maintain catalog directly without transport in the production system.
Only development or test system ask you a request number.
Regards
Luke

Similar Messages

Extraction of the data from R/3 to BW using function module

hi all,
i m extracting the data from SFLIGHT using fm RSAX_BIW_GET_DATA_SIMPLE . Could you pls tell me that E_T_DATA is a structure (wa) or table internal .
rgds,
Deepak.

Hi Deepak,
You cannot replace E_T_DATA with S_FLIGHT, (For that matter you should not replcae witha ny tables) because, E_T_DATA is a Export parameter for the Function module RSAX_BIW_GET_DATA_SIMPLE and it contains the changed data records. The data that the Function module has to populate to BW system goes via this Export Parameter E_T_DATA.
Hope its clear for you.
Regards,
Vidhya

Using function module HR_READ_INFOTYPE

Hi,
I am fetching the data from PA0001,PA0002 and PA0105 using function module HR_READ_INFOTYPE.But when I am passing the prnr as 7 , it is getting changed to 7000 in the function module. Thats why it is not fetching the data.Please suggest why is it happening. ALso I have to fetch name of the pernr. But from PA0002 , I am not able to fetch the name.Please suggest the solution.

Make sure for data Declaration in you program you have defined Pernr like
        pernr         LIKE p0000-pernr,            "Personnel Number
Also check the valid infotype records exists for the dates you are passing
CALL FUNCTION 'HR_READ_INFOTYPE'
          EXPORTING
             TCLAS                 = 'A'
             pernr                 = g_t_table-pernr
             infty                 = '0002'
             begda                 = g_t_table-begda
             endda                 = g_t_table-endda
*             BYPASS_BUFFER         = ' '
*             LEGACY_MODE           = ' '
*           IMPORTING
*             SUBRC                 =
          TABLES
            infty_tab             = p0002
          EXCEPTIONS
            infty_not_found       = 1
            OTHERS                = 2

Error in Data selection in R/3 Generic Extraction Using function Modules

Hi Friends,
I have created a a generic data source using function module to load data from PA0000 and PA0001 Tables ,Function module is working fine when i execute it indipendently and the data source is also working fine when i extract data using RSA3. it is showing correct no of records 157.
When loading data into DSO from BW (using 3.x/7.0 flows) data is comming to PSA all 157 records but in the RSMO the load status is showing yellow when i look into the step by step analysis it is
data selection successfully started
Data selection successfully ended
All Data packets completed.
are showing in red.
after and hour time load getting failed and in the error message it is showing " job terminated in source system---> Request set to red"
it is giving this message wir no RSM 78.
Please let me know it

Hi Jerry,
Thanks for the immediate replay
But here in my source system job is getting terminated.
this is the status of job in Job logs.
the job is running till this step not going ahead.
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 157 records
Result of customer enhancement: 157 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 301 records
Result of customer enhancement: 157 records
Asynchronous send of data package 000001 in task 0002 (1 parallel tasks)
pl. update me if any idea.

Creation of Generic Data source using function module based on the program which was used to created ABAP report

Hi,
We have a requirement to create a BI report based on plant maintenance report. The plant maintenance report is based on a ABAP program with complex logic. My question is i want create a Generic Datasource using Function module and can I include the logic(Abap Program) that is used for plant maintenance report in the function module? Please share your thoughts.
Thanks,
Ravi

Hi,
Step1-Create a table structure which you need to create same as the fields you require in you data source.
Step 2-create a custom abap program and inside that call the Client abap program with the selections as required and save the result data in some table
Step 3-create infoset query.In the infoset query give your table structure name and program name which you developed.
Step4-create data source on top of that query

R/3 Master Data Extraction Using Function Module

Hi Experts,
Could you please let me know why & How (Detail procedure) to extract R/3 master data using function module.
My team manager asked me to extract master data from R/3 for 3 more attributes of info object '0material' which is already defined as data target.
I would like to know why they are extracting data using function module
Thanks

The steps for creating extractor using Function Module. I
1. Create new Function group (if you have already not done so) in Se80
2. Copy Function module "RSAX_BIW_GET_DATA_SIMPLE" with suitable name.
3. Change the code that populate data.
Following table may give you the guideline for parameters.
Parameter Description
I_REQUNR (import) BW provides this request identifier. It is a system-generated identifier in the form REQU_XXXXXX. BW uses this same identifier in all function module calls that relate to a single load.
I_DSOURCE (import) The name of the generic extractor
I_MAXSIZE (import) The maximum number of records that BW expects to be in each data packet
I_INITFLAG (import) A Boolean flag that indicates if this is the initialization (first) call to the function module
I_READ_ONLY (import) A test flag not needed in most extraction scenarios
I_T_SELECT (table) This table holds any selections from the BW InfoPackage. The function module should examine these selections and only return data that matches the selections.
I_T_FIELD (table) This table holds the fields that BW requests
E_T_DATA (table) The function module fills this table with data records. These records then return to BW as data packets. This table has the same structure as the extract structure defined in the generic DataSource.
NO_MORE_DATA (exception) The function module raises this exception when no more data is available
ERROR_PASSED_TO_MESS_HANDLER (exception) The function module raises this exception if an error occurred during the extraction. It alerts BW to check for error logs.
Change following code to put the selection fields
Select ranges
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
L_R_CONNID FOR SFLIGHT-CONNID.
Change following to populate data
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
WHERE CARRID IN L_R_CARRID AND
CONNID IN L_R_CONNID.
ENDIF. "First data package ?
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
below links
Re: functionmodule
Re: FM for G. extractor
***Assign points if it helps.**
Regards
CSM Reddy

Generic Data Extraction From SAP R/3 to BI server using Function Module

Hi,
I want step by step procedure for Generic Extraction from SAP R/3 application to BI application
using Functional module.
If any body have any Document or any PPT then please reply and post it in forum, i will give point for them.
Thanks & Regards
Subhasis Pan

please go thr this link
[SAP BI Generic Extraction Using a Function Module|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/sap%20bi%20generic%20extraction%20using%20a%20function%20module.pdf]
[Generic Data Extraction Using Function Module |Re: Generic Data Extraction Using Function Module;

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to extract the data by using function module?

hi experts,
what are the steps i have to fallow to extract the data from R/3 by using FUNCTION MODULE.
thanks & regards
venkat

Hi,
Extracting data from R/3 extract structure thru function modules
You can proceed with create function module using SE37, thereu2019s sample in system RSAX_BIW_GET_DATA_SIMPLE,
You need to know the logic how to populate the structure,
after that RSO2, create datasource specify extract structure and
function module,
activate and replicate to bw.
Chheers
Raj

Updating liveCache Data using Function Module or ABAP program.

Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikas

ello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

How to use function module to update data

Hello ,
Can any body have idea how we can use function module SAVE_TEXT to update the master recipe header and operation long text.
I want to use this functional module to update the master recipe long text
step by step procedure is highly appreciated
thanks & regards
siddhasrth

Hi
SAVE_TEXT
SAVE_TEXT writes a text module back to the text file or the text memory, depending on the storage mode of the corresponding text object.
You can use this module either to change existing texts or to create new texts. If you know for sure that the text is new, use the parameter INSERT to indicate this. The system then does not have to read the text first, which improves the performance of the function module.
If the lines table passed with the function module is empty, the system deletes the text from the text file.
Function call:
CALL FUNCTION 'SAVE_TEXT'
EXPORTING CLIENT = SY-MANDT
HEADER = ?...
INSERT = SPACE
SAVEMODE_DIRECT = SPACE
OWNER_SPECIFIED = SPACE
IMPORTING FUNCTION =
NEWHEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
check thi sample code
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = t_header
SAVEMODE_DIRECT = 'X'
* OWNER_SPECIFIED = ' '
* LOCAL_CAT = ' '
* IMPORTING
* FUNCTION =
* NEWHEADER =
TABLES
LINES = t_long
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
Reward all helpfull answers
Regards
Pavan

Delta with Generic Extractor using function module

Hi,
I have created an extractor using function module and it work fine (mode FULL)
It's an extractor based on the FM RSAX_BIW_GET_DATA_SIMPLE.
In TCODE RSO2, I have specified a delta field (AEDAT).
In table ROOSOURCE, this extractor is defined by :
DELTA = AIE
EXMETHOD = F1
When I extract data in Init mode, there is no problem. But delta don't extract any entries.
When I trace with TCODE ST01, in Init mode the function module is executed but in delta mode, there is no trace of any use of this function module.
I don't know how to do to make this extractor work fine in delta mode.

Hi Pascal,
The same function module i have used and succesffuly doing delta using it. So it works for both full & delta.
How ur testing it and where are you testing it for delta.
Do the delta testing through BI end. Set the
As u have already set the delta field., now Follow below steps:
1. First set the safety interval upper limit to -1, so that it will extract the delta data of 1 day back records also.
2. Please make sure wether the delta records are available or not in r/3, if there is no records to be fetched in for delta then u will not be able to track out wether delta is working or not.
3. Now do the init from BI end first. Delta initialization without data transfer. - It will give u green status with 1 dummmy record.
4. Now do the delta. It will extract the delta records.
Before that make sure that if any selection your giving in Infopackage should be met out by these delta records.
Thanks
Dipika

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
      W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
      P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
      MY_MONTH type T549Q-PABRP,
      STR_MY_MONTH(2) type C,
      MY_YEAR type T549Q-PABRJ,
      STR_MY_YEAR(4) type C,
      CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
      ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
        INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
   CMD like PC408-LTYPE value '/:', "command
   TXT like PC408-LTYPE value 's',   "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
      DOCDATA like SODOCCHGI1,
      OBJTXT like SOLISTI1 occurs 10 with header line,
      OBJPACK like SOPCKLSTI1 occurs 1 with header line,
      RECLIST like SOMLRECI1 occurs 1 with header line,
      OBJHEAD like SOLISTI1 occurs 1 with header line,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_buffer type string,
      l_no_of_bytes TYPE i,
      l_pdf_spoolid LIKE tsp01-rqident,
      l_jobname     LIKE tbtcjob-jobname.
data: file_length type int4,
      spool_id     type rspoid,
      line_cnt     type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN                                                  *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
*                                 "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
*                                 "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
*                                 "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
    ITAB-PERNR      = P0001-PERNR.
    ITAB-ABKRS      = P0001-ABKRS.
    ITAB-ENAME      = P0001-ENAME.
    ITAB-USRID_LONG = P0105-USRID_LONG.
    append itab.
    clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area        : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time         : ', SY-UZEIT.
write : / 'User Name           : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
    clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
    refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
*                                                  Retrieve Payroll results sequence number for this run
    select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
                                    and FPBEG ge W_BEGDA
                                    and FPEND le W_ENDDA
                                    and SRTZA eq 'A'.
*                                                  Produce payslip for those payroll results
    if SY-SUBRC = 0.
      call function 'GET_PAYSLIP'
        EXPORTING
          EMPLOYEE_NUMBER = ITAB-PERNR
          SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
          PAYSLIP_VARIANT = PAY_VAR
        IMPORTING
          RETURN          = RETURN
          P_INFO          = P_INFO
        TABLES
          P_FORM          = P_FORM.
      check RETURN is initial.
*                                                 remove linetype from generated payslip
      loop at p_form.
        objbin = p_form-linda.
        append objbin.
        line_cnt = line_cnt + 1.
      endloop.
      file_length = line_cnt * 1022.
*                                                 create spool file of paylsip
      CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
        EXPORTING
          i_file_length = file_length
        IMPORTING
          e_spoolid     = spool_id
        TABLES
          it_textdata   = objbin.
      IF sy-subrc EQ 0.
        WRITE spool_id.
      ENDIF.
      DESCRIBE table objbin.
      DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          SRC_SPOOLID                    = spool_id
          NO_DIALOG                      = ' '
          DST_DEVICE                     = 'MAIL'
*      PDF_DESTINATION                =
*    IMPORTING
*      PDF_BYTECOUNT                  = l_no_of_bytes
*      PDF_SPOOLID                    = l_pdf_spoolid
*      LIST_PAGECOUNT                 =
*      BTC_JOBNAME                    =
*      BTC_JOBCOUNT                   =
        TABLES
          PDF                            = pdf
        EXCEPTIONS
          ERR_NO_ABAP_SPOOLJOB           = 1
          ERR_NO_SPOOLJOB                = 2
          ERR_NO_PERMISSION              = 3
          ERR_CONV_NOT_POSSIBLE          = 4
          ERR_BAD_DESTDEVICE             = 5
          USER_CANCELLED                 = 6
          ERR_SPOOLERROR                 = 7
          ERR_TEMSEERROR                 = 8
          ERR_BTCJOB_OPEN_FAILED         = 9
          ERR_BTCJOB_SUBMIT_FAILED       = 10
          ERR_BTCJOB_CLOSE_FAILED        = 11
          OTHERS                         = 12
      IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename = 'C:\itab_to_pdf.pdf'
      filetype = 'BIN'
    TABLES
      data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
*    TRANSLATE pdf USING ' ~'.
*    CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
*    it_mess_att = gd_buffer.
*    APPEND it_mess_att.
*    SHIFT gd_buffer LEFT BY 255 PLACES.
*    IF gd_buffer IS INITIAL.
*      EXIT.
*    ENDIF.
* ENDDO.
      OBJHEAD = 'Objhead'.
      append OBJHEAD.
* preparing email subject
      concatenate W_ENDDA(6)
                ' Payslip-'
                ITAB-ENAME+0(28)
                ITAB-PERNR+4(4) ')'
             into DOCDATA-OBJ_DESCR.
      DOCDATA-OBJ_NAME = 'Pay Slip'.
      DOCDATA-OBJ_LANGU = SY-LANGU.
      OBJTXT = 'Pay Slip.'.
      append OBJTXT.
*prepare email lines
      OBJTXT = DOCDATA-OBJ_DESCR.
      append OBJTXT.
      OBJTXT = 'Please find enclosed your current payslip.'.
      append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
      read table OBJTXT index 3.
*    DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
      clear OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = 3.
      OBJPACK-DOC_TYPE = 'RAW'.
      append OBJPACK.
* Create Message Attachment
      ATT_TYPE = 'PDF'.
      describe table OBJBIN lines TAB_LINES.
      read table OBJBIN index TAB_LINES.
*    OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = ATT_TYPE.
      OBJPACK-OBJ_NAME = 'ATTACHMENT'.
      OBJPACK-OBJ_DESCR = 'Payslip'.
      append OBJPACK.
* Create receiver list refresh RECLIST.
      clear RECLIST.
      RECLIST-RECEIVER = itab-USRID_long.
      translate RECLIST-RECEIVER to lower case.
      RECLIST-REC_TYPE = 'U'.
      append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
      call function 'SO_DOCUMENT_SEND_API1'
        exporting
          DOCUMENT_DATA = DOCDATA
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK = 'X'
* IMPORTING
*   SENT_TO_ALL =
*   NEW_OBJECT_ID =
        tables
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
          CONTENTS_BIN = pdf
          CONTENTS_TXT = OBJTXT
*   CONTENTS_HEX =
*   OBJECT_PARA =
*   OBJECT_PARB =
          RECEIVERS = RECLIST
        exceptions
          TOO_MANY_RECEIVERS = 1
          DOCUMENT_NOT_SENT = 2
          DOCUMENT_TYPE_NOT_EXIST = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR = 5
          X_ERROR = 6
          ENQUEUE_ERROR = 7
          others = 8.
      if SY-SUBRC NE 0.
        ITAB-MTEXT = 'Message Not Sent to : '.
      else.
        ITAB-MTEXT = 'Message Sent to : '.
      endif.
*    else.
*      ITAB-MTEXT = 'Message Not Sent to : '.
*    endif.
    else.
      "SY-SUBRC Not = 0
      ITAB-MTEXT = 'Payroll data not found : '.
    endif.
    "end of SY-SUBRC = 0.
    modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
    at new MTEXT.
      uline.
      write : / ITAB-MTEXT color 4 intensified on.
      write : / 'Emp. Code' color 2 intensified on,
             12 'Emp. Name' color 2 intensified on,
             54 'Email ID' color 2 intensified on.
    endat.
    write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

Error occurred while loading Generic extraction using Function module

Hi all
I'm trying to do INIT for Generic Extractor using Function module, but i'm getting error as "Error occurred in the source system"
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Job terminated in source system --> Request set to red
Message no. RSM078
Can u help plz....

Hi Vishnu
This are the Job log details i found in source system...Can u tell what whould be the problem?
Message
Job started
Step 001 started (program SBIE0001, variant &0000000002861, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZYFI102
RLOGSYS    =
REQUNR     = REQU_D9Y4CZDQULRIHRRVU33KOLQZO
UPDMODE    = D
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 10737418240                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
No authorization for Acct type D
Job cancelled after system exception ERROR_MESSAGE
Thanks in advance
Edited by: MohanDP on Feb 25, 2011 11:58 AM
Edited by: MohanDP on Feb 25, 2011 12:01 PM

Data transfer of Selected sets (QS51) using Function modules

Similar Messages

Maybe you are looking for