Is it poss to do text paging using RTP Streaming???

Hi,
Is it possible to send text message to group of Cisco IP phones connected to CME through HTTP POST using CiscoIPPhoneExecute and RTPMRx and RTPMTx commands
Thanks,
Preetha

Yes, it is possible to send text message to a group of phones on CME using HTTP POST. However, RTPMx and RTPTx are only used for audio reception and transmission. If you want to send audio, in addition to text, then you can use that. This is how PhoneTop Messenger sends audio pages and text messages to IP phone groups.

Similar Messages

Using RTP stream as data source

I have successfully written a program that reads G.711 audio from a wav file and sends it out over the network.
I'm trying to modify that program so that instead of getting its source audio from a file, it instead receives the audio from an RTP stream. So, in effect, it is simply receiving audio from one socket and sending it back out another.
The error I'm encountering:
[java] javax.media.NoProcessorException: Cannot find a Processor for: rtp://172.30.18.140:32916
[java] at javax.media.Manager.createProcessorForContent(Manager.java:1663)
[java] at javax.media.Manager.createProcessor(Manager.java:627)
Here is the code fragment where the exception occurs:
processor = javax.media.Manager.createProcessor(new MediaLocator("rtp://172.30.18.140:32916"));
Can anybody help? Thanks!
<removed funky formatting><br>
Message was edited by:
feh

Hi,
I Had a very similar problem, but in addiction I had to store data in a buffer before retransmission. I resolved it employing low level classes. At this time, I still do not know any other solution, and nobody helped me in any way, also in this forum...
So, first you have to access single frames of the stream (Buffer or ExtBuffer objects) using a RawBufferParser, then you have to reconstruct a DataSource by multiplexing the frames (use an appropriate Multiplexer class, such as RTPSynchBufferMux).
The big problem is that there is no documentation avalaible about how to use these classes: I have lerned all I know by "reverse engineering" (lots of hours spent in reading very long annoying code). A little help can be given by the PlugIn Viewer of JMStudio, that tells you which classes are to be employed.
I have not tried to retransmit data "straightforward", without access single frames, because that was not my task. Maybe if you use RTPManager, it is possible to get a DataSource by the ReceiveStream object, and then to pass it to another RTPManager to create a SendStream.
I do not know any simpler way to do that, but this does not mean that it does not exist...!
good luck.
Alberto M. (Italy)

Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1

hello guys, i'm a newbie here.
I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
REPORT ZHR_TESTEMAIL .
TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
DATA: FOLD_YR(2) TYPE C,
      FOLD_TYPE(3) TYPE C,
      G_HEADER LIKE SOOD2,
      G_FOLMAM LIKE SOFM2,
      METHOD1 LIKE SY-UCOMM,
      G_DOCUMENT LIKE SOOD4,
      G_USER LIKE SOUDNAMEI1,
      FOLD_NUMBER(12) TYPE C,
      G_NEW_PARENT LIKE SOODK,
      G_OWNER LIKE SOUD-USRNAM,
      G_REF_DOCUMENT LIKE SOOD4,
      G_USER_DATA LIKE SOUDATAI1,
      G_AUTHORITY LIKE SOFA-USRACC,
      G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
      G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
      G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
      G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
      G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
      G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
      G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF G_FILES OCCURS 10 ,
      TEXT(4096) TYPE C,
      END OF G_FILES.
DATA: BEGIN OF IT_WS_FILE OCCURS 0,
      WS_FILE LIKE RLGRAP-FILENAME,
      END OF IT_WS_FILE.
DATA: BEGIN OF IT_SAPID OCCURS 0,
      SAPID LIKE USR02-BNAME,
      END OF IT_SAPID.
DATA: BEGIN OF IT_EMAIL OCCURS 0,
      EMAILADD LIKE PA0105-USRID_LONG,
      END OF IT_EMAIL.
DATA: BEGIN OF IT_TSP01 OCCURS 0.
        INCLUDE STRUCTURE TSP01.
DATA: END OF IT_TSP01.
DATA: BEGIN OF TAB2 OCCURS 50,
      TEXT(200) TYPE C,
      END OF TAB2.
DATA: V_DOCDATA TYPE SODOCCHGI1,
      V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
      V_OBJHEAD LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      V_OBJTXT LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      V_OBJBIN LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      V_OBJHEX LIKE SOLIX      OCCURS 0 WITH HEADER LINE,
      IT_RECVRS TYPE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
      IT_CONTNT TYPE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      IT_BODY   LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
      V_TLIN    TYPE I,
      V_LINE    TYPE I.
DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
      TEXTLINE(5000),
      END OF IT_TEXTLINE.
DATA: FYL LIKE RLGRAP-FILENAME,
      GV_SUBNO LIKE SOSU-SUBNO,
      GV_EMAIL LIKE PA0105-USRID_LONG,
      GV_NEXTDAY LIKE SY-DATUM,
      YEAR(4) TYPE C,
      RECFLAG TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
PARAMETERS: SUBJ(254) TYPE C OBLIGATORY,            "Subject
            DESC(254) TYPE C.                       "Message
SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM2.
SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT2 RADIOBUTTON GROUP A.                  "Server
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT3 RADIOBUTTON GROUP A.                  "Spool
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER.            "Spool Number
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM3.
SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PROC.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
CLEAR: WS_FILE_TEMP.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            PROGRAM_NAME = SY-REPID
            DYNPRO_NUMBER = SY-DYNNR
            FIELD_NAME    = 'WS_FILE'
       IMPORTING
            FILE_NAME     = WS_FILE_TEMP.
WS_FILE-LOW = WS_FILE_TEMP.
AT SELECTION-SCREEN.
SELECT SAPNAM FROM SOUC
      INTO TABLE IT_SAPID
      WHERE SAPNAM IN SAPID
        AND DELETED = ''.
GV_NEXTDAY = SY-DATUM + 1.
LOOP AT EMAILADD.
    IT_EMAIL-EMAILADD = EMAILADD-LOW.
    APPEND IT_EMAIL.
    CLEAR: IT_EMAIL.
ENDLOOP.
IF NOT BPROC IS INITIAL.
    CLEAR: RBUT1, RBUT3.
    RBUT2 = 'X'.
ELSE.
    CLEAR: RBUT2.
ENDIF.
IF NOT RBUT3 IS INITIAL.
    REFRESH: WS_FILE.
ENDIF.
IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
    MESSAGE E000(ZZ) WITH TEXT-201.
ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
    CLEAR IT_SAPID.
    READ TABLE IT_SAPID.
    SELECT SINGLE SUBNO FROM SOSU
      INTO GV_SUBNO
      WHERE USRNO IN ( SELECT USRNO FROM SOUC
                         WHERE SAPNAM = IT_SAPID-SAPID ).
    IF SY-SUBRC NE 0.
      MESSAGE E000(ZZ) WITH TEXT-202.
    ENDIF.
    CLEAR: IT_SAPID.
ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
    CLEAR: IT_SAPID, IT_EMAIL.
    READ TABLE IT_SAPID.
    READ TABLE IT_EMAIL.
    SELECT SINGLE SUBNO FROM SOSU
      INTO GV_SUBNO
      WHERE USRNO IN ( SELECT USRNO FROM SOUC
                         WHERE SAPNAM = IT_SAPID-SAPID ).
    IF SY-SUBRC NE 0.
      SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
                      WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
                      WITH SUB_ESC EQ 'U'
                      WITH EDAT EQ SY-DATUM
                      WITH BDAT EQ SY-DATUM
                     WITH BDAT EQ GV_NEXTDAY
                     WITH EDAT EQ '99991231'
                      WITH BTIM EQ SY-UZEIT
                      WITH ETIM EQ '240000'
                      WITH FORW_ALL EQ 'X'
                      WITH PSTHR2 EQ ''
                      AND RETURN.
    ENDIF.
    CLEAR: IT_SAPID.
ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
    RECFLAG = 'X'.
ENDIF.
START-OF-SELECTION.
    PERFORM B_SENDMAIL.
FORM B_SENDMAIL.
YEAR = SY-DATUM+0(4).
LOOP AT WS_FILE.
    CLEAR: FYL.
    FYL = WS_FILE-LOW.
    REFRESH: TAB2.
    CALL FUNCTION 'WS_UPLOAD'
         EXPORTING
              FILENAME = FYL
              FILETYPE = 'BIN'
         TABLES
              DATA_TAB = TAB2.
    IT_TEXTLINE[] = TAB2[].
DOCUMENT_DATA (SUBJECT OF MAIL)
    V_DOCDATA-OBJ_NAME   = DESC.
    V_DOCDATA-OBJ_DESCR = SUBJ.
    V_DOCDATA-OBJ_LANGU = SY-LANGU.
    V_DOCDATA-SENSITIVTY = 'C'.
    V_DOCDATA-OBJ_PRIO   = '1'.
BODY OF MAIL
    IT_BODY-LINE = 'Collection Report'.
    APPEND IT_BODY.
CONTENTS_TXT (Attachments)
    IT_CONTNT[] = IT_TEXTLINE[].
    DESCRIBE TABLE IT_CONTNT LINES V_LINE.
    READ TABLE IT_CONTNT INDEX V_LINE.
PACKING_LIST
    V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
    V_OBJPACK-TRANSF_BIN = 'X'.
    V_OBJPACK-HEAD_START = 1.
    V_OBJPACK-HEAD_NUM   = 0.
    V_OBJPACK-BODY_START = 1.
    V_OBJPACK-BODY_NUM   = V_LINE.
    V_OBJPACK-DOC_TYPE   = 'TXT'.
    V_OBJPACK-OBJ_NAME   = 'ATTACHMENT'.
    V_OBJPACK-OBJ_DESCR = 'Attached Document'.
    APPEND V_OBJPACK.
    CLEAR V_OBJPACK.
RECEIVERS of mail
    IF RECFLAG IS INITIAL.
      LOOP AT IT_SAPID.
        IT_RECVRS-RECEIVER   = IT_SAPID-SAPID.
        IT_RECVRS-REC_TYPE   = 'B'.
        IT_RECVRS-COM_TYPE   = ''.
        IT_RECVRS-EXPRESS    = 'X'.
        IT_RECVRS-NO_FORWARD = ''.
        IT_RECVRS-NO_PRINT   = ''.
        APPEND IT_RECVRS.
        CLEAR IT_RECVRS.
      ENDLOOP.
    ELSE.
      LOOP AT EMAILADD.
        IT_RECVRS-RECEIVER   = EMAILADD-LOW.
        IT_RECVRS-REC_TYPE   = 'U'.
        IT_RECVRS-COM_TYPE   = 'INT'.
        IT_RECVRS-EXPRESS    = 'X'.
        APPEND IT_RECVRS.
        CLEAR IT_RECVRS.
      ENDLOOP.
    ENDIF.
OBJECT_HEADER (Filename)
    CONCATENATE 'Collection Report' '_'
                 SY-DATUM+4(4) YEAR '.TXT'
                 INTO V_OBJHEAD-LINE.
   V_OBJHEAD-LINE = FYL+16(25).
    APPEND V_OBJHEAD.
    CLEAR V_OBJHEAD.
Function Module For Sending Mail with Attachment
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = V_DOCDATA
         TABLES
              PACKING_LIST               = V_OBJPACK
              OBJECT_HEADER              = V_OBJHEAD
              CONTENTS_HEX               = IT_CONTNT
              CONTENTS_TXT               = IT_BODY
              RECEIVERS                  = IT_RECVRS
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              DOCUMENT_TYPE_NOT_EXIST    = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR            = 5
              X_ERROR                    = 6
              ENQUEUE_ERROR              = 7
              OTHERS                     = 8.
    IF SY-SUBRC = 0.
      MESSAGE S000(ZZ) WITH TEXT-005.
    ELSE.
      MESSAGE S000(ZZ) WITH TEXT-006.
    ENDIF.
ENDLOOP.
end of my code *
please help me guys... when i run this program,    DOCUMENT_NOT_SENT is what i always get..
waiting for ur reply... thank you vey much and godbless.

Hi,
Try this sample code.
FORM SEND_TO_EMAIL USING zFName.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: ctmp(50) TYPE C.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'JOURNAL'.
CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
              SEPARATED BY SPACE.
DOC_CHNG-OBJ_DESCR = cTmp.
OBJTXT = 'SAP Payroll Journal'.
APPEND OBJTXT.
CONCATENATE 'For Period' pybegda INTO ctmp
              SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
CONCATENATE 'Attached File :' zFname INTO ctmp
              SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
OBJTXT = 'Please find the attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
<b>LOOP AT xMail.
    CONDENSE xMail-aline.
    OBJBIN = xMail-aline.
    APPEND OBJBIN.
    CLEAR OBJBIN.
ENDLOOP.</b>
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = zFname. APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
OBJPACK-OBJ_NAME = 'DATA'.
OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
LOOP AT PENERIMA.
    CONDENSE PENERIMA-PNRM.
    RECLIST-RECEIVER = PENERIMA-PNRM.
    RECLIST-REC_TYPE = 'U'.
    APPEND RECLIST.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
            PUT_IN_OUTBOX              = ' '
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
CASE SY-SUBRC.
    WHEN 0.
      WRITE: / 'Result of the send process:'.
      LOOP AT RECLIST.
        WRITE: / RECLIST-RECEIVER(48), ':'.
        IF RECLIST-RETRN_CODE = 0.
          WRITE / 'The document was sent'.
        ELSE.
          WRITE / 'The document could not be sent'.
        ENDIF.
      ENDLOOP.
    WHEN 1.
      WRITE: / 'Too many receiver'.
    WHEN 2.
      WRITE: / 'Document could not be sent to any recipient'.
    WHEN 4.
      WRITE: / 'No send authorization'.
    WHEN OTHERS.
      WRITE: / 'Error occurred while sending'.
ENDCASE.
ENDFORM.

Why do text variables using Running Header character style translate forced returns as a word space in the running head on the first page but close up the space on subsequent pages?

In an InDesign document that requires 3 different Chapter head paragraph styles (to cope with differrent length headings) I've set up the running heads on the master page with a text variable using the Running header (character style) option. The character style I've assigned to this is an empty character style that is applied to all 3 chapter head paragraph styles.
Some chapter heads require a forced line break, so that the line breaks are aethesically pleasing. On the first page the text variable translates this forced line break as a word space in the running head, but on subsequent pages it ignores the forced line break. This means that if you have a word space before the forced line break, on the first page you get a double word space and on subsequent pages the running head sets correctly with a single word space. But if you remove the word space before the forced line break in the chapter head text, the first running head sets correctly with forced line break interpreted as a single word space, but on subsequest pages the space is closed up.
This only seems to be a problem when the character style option is used for header text variables. If a paragraph style is used the forrced line break is interpreted as a a single word space in all instances, both on the foirst page and subsequent pages.
This would appear to be a bug in how text variables are applied when using the Running header (character style) option. I can't see any other reason why the text variable would beheave differently on the first page and on subsequent pages. There is only one master page, so it isn't a case of their being an error between a main master page and a chapter opener master page.
Does anyone have any solutionss, or know if this problem has been fixed in subsequent releases of InDesign (I'm using CS6 ID version 8.0)
Thanks

Ask in the ID forum...
Mylenium

Multi-language support for user-specified text strings used in the forms

multi-language support for user-specified text strings used in the forms
Instead of creating multiple forms, 1 in each different language, for the same service, is there any workaround?

Hoan - is your question what are the considerations when creating multiligual catalogs? If so, I can tell you that at other clients I have seen them use a single catalog for one or two languages. For the two langugages, such as Spanish/English, you can create a single catalog with both of them. Once you get to more than two languages, the catalog would get unweildy and is therefore not suggested.

How to print a text file using Java

How can I print a text file using Java without converting the output to an image format. Is there anyway I can send the characters in the text file as it is for a print job? I did get a listing doing this ... but that converted the text to an image format before printing....
THanks,.

Hi I had to write a print api from scratch, and I did not convert the output to image. Go and read up on the following code. I know there is a Tutorial on Sun about the differant sections of the snippet.
private void printReport()
     Frame tempFrame = new Frame(getName());
     PrintJob printerJob = Toolkit.getDefaultToolkit().getPrintJob(tempFrame, "Liesltext", null);
     Graphics g = printerJob.getGraphics();
                //I wrote the method below for calculations
     printBasics(g);
     g.dispose();
     printerJob.end();
}This alone wont print it you have to do all the calculations in the printBasics method. And as I said I wrote this from scratch and all I did was research first the tutorial and the white papers
Ciao

How to download a text file using classes

Hi Guys
I want to download a text file using classes.
Any idea how to do it ?
Thanks
Sameer

HI sameer,
   It is no different from using a Function module.
example:
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename                  = w_fpath
    append                    = SPACE
      write_field_separator     = 'X'
    CHANGING
      data_tab                  = it_download
    EXCEPTIONS
      file_write_error          = 1
      no_batch                  = 2
      gui_refuse_filetransfer   = 3
      invalid_type              = 4
      no_authority              = 5
      unknown_error             = 6
      header_not_allowed        = 7
      separator_not_allowed     = 8
      filesize_not_allowed      = 9
      header_too_long           = 10
      dp_error_create           = 11
      dp_error_send             = 12
      dp_error_write            = 13
      unknown_dp_error          = 14
      access_denied             = 15
      dp_out_of_memory          = 16
      disk_full                 = 17
      dp_timeout                = 18
      file_not_found            = 19
      dataprovider_exception    = 20
      control_flush_error       = 21
      not_supported_by_gui      = 22
      error_no_gui              = 23
      OTHERS                    = 24
Regards,
ravi

How to create a muli line text area using JavaFx

Hi all,
Since the preview SDK does not contain TextArea any more, I am wondering how to create a muli line text area using JavaFX. The behaviour of this text area/field should be somehow similar to JTextArea in Swing or StyledTextWidget in SWT.
Does JavaFX have any support for this? What would be a sensible approach to create such a widget?
Thanks for your suggestions,
br michael

This is a pretty old thread (I know I came across this while searching for something similar recently), but I figured I'd throw this out there in case other people might find this useful. As I write this, JavaFX's latest version is 1.3... which may have added the needed functionality since the last post.
You can now create a multi-line text area using a TextBox and by specifying the nubmer of lines and setting the "multiline" value to true. It may not offer all of the same functionality as JTextArea, but it did the job for what I needed... newlines by pressing enter, scrollbar if text surpasses height, etc.
Here's a simple example:
Group {
   content: [
      TextBox {
         text: "This is a multi-line textbox"
         lines: 10 // <-- this may/may not be necessary depending on your situation. Default is 5.
         multiline: true
}Edited by: loeschg on Jul 29, 2010 2:59 PM

How can I change the background color in text box using RGB format

Can some one tell me if Mac Pages (version 5.0) allows users to customize the background color of a text box using RGB color format? It appears that the text color can be changed using RGB but background color is limited to a few standard colors. Thanks

They are just sample swatches, use the Color Picker to choose anything you want.
Peter

How to read a tab seperated data from a text file using utl_file

Hi,
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....
Thanks in advance...
Naveen

Naveen Nishad wrote:
How to read a tab seperated data from a text file using utl_file...
I know if we use UTL_FILE.get_line we can read the whole line...but i need to read the tab separated value separately.....If it's a text file then UTL_FILE will only allow you to read it a line at a time. It is then up to you to split that string up (search for split string on this forum for methods) into it's individual components.
If the text file contains a standard structure on each line, i.e. it is a fixed delimited structure, then you could use external tables to read the data instead.

How to read some lines from a text file using java.

hi,
i m new to java and i want to read some lines from a text file based on some string occurrence in the file. This file to be read in steps.
we only want to read the file upto the first Occurrence of "TEXT" string.
How to do it ,,,
Kinldy give the code
Regards,
Sagar
this is the text file
dfgjdjj
sfjhjkd
ghjkdg
hjkdgh TEXT
ikeyt
ujt
jk
tyk TEXT
rukl
r

Hendawy wrote:
Since the word "TEXT" is formed of 4 letters, you would read the text file 4 bytes by four bytes. Wrong on two counts. First, the file may not be encoded 1 byte per character. It could be utf-16 in which case it would be two byte per character. Second, even if it were 1 byte per character, the string "Text" may not start on a 4 byte boundary.
Consider a FileInputStream object "fis" that points to your text file. use fis.read(byte[] array, int offset, int len) to read every four bytes. Convert the "TEXT" String into a byte array "TEXT".getBytes(), and yous the Arrays class to compare the equality of the read bytes with your "TEXT".getBytes()Wrong since it relies on my second point and will fail when fis.read(byte[] array, int offset, int len) does not read 4 bytes (as is no guaranteed to). Check the Javadoc. Also, the file may not be encoded with the default character encoding.
The problem is easily solved by reading a line at a time using a BufferedReader wrapping an InputStreamReader wrapping a FileInputStream and specifying the correct character encoding.
Edited by: sabre150 on Apr 29, 2009 2:13 PM

How to call text file using Script in Data Integrator

Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.

mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
     bis= new BufferedInputStream(new FileInputStream(f));
     bytesRead=bis.read(buff,0,buff.length);
     if(bytesRead!=-1){
          // create a BufferedOutputStream from ServletOutputStream
          bos=new BufferedInputStream(response.getOutputStream());
          do{
               bos.write(buff,0,bytesRead);
          }while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
     ////error handling
     }

My iphone keeps freezing when I am texting or using the key pad. Any suggestions? Already tried resetting.

When I am typing a text or using my key pad, the typing will freeze and my iphone will hang. I have tried resetting my phone but it didnt correct the issue. Any suggestions?

Hello Alesia,
The following articles may be helpful in getting your keyboard troubles sorted.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
All the best,
Allen

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

Need info about text elements used in Smartform / Sapscript

Hi experts
I am working on Smartform / Sapscript i am facing the problem mentioned below
I want the info regarding all the text elements used in Form / Script
Can u please suggest me the name of table
I have already used STXH table but it is not giving me the all text elements
I mean i want that if i enter some formane ...i should get all the text elment contained in it
Plz help me
Thanks

Hi Gaurav,
Try out the fn module "READ_TEXT".
Hope it helps you.
Regards,
CS.
Note: Reward points if helpful.

Is it poss to do text paging using RTP Streaming???

Similar Messages

Maybe you are looking for