Is it possible to create a pop-up menu with sub-headings

I am trying to setup a pop-up menu in Number that would give me the ability to first create subheadings, that I can then enter my selection list in.
Example:
Subheading 1
     eg 1
     eg 2
     eg 3
Subheading 2
     eg 1
     eg 2
     eg 3
Subheading 3
     eg 1
     eg 2
     eg 3
I did try to search for a solution to this, but nothing came up that I recognized quickly. So, I'm hopeful that someone out there in the Apple community has a quick work-around for acomplishing this.
Thanks,

Strictly speaking this i not possible. You could precede each entry that is indented with a space to make the menu appead to have sub entries.

Similar Messages

Is it possible to create a pop up screen with alv tree within it?

I was wondering whether it is possible to create a pop up screen where an ALV tree is within the pop up screen and the user may select a record from it..
is there a function module for such function?

you may use class cl_gui_alv_tree and display it in a popup screen. Look at RSDEMO_DIALOGBOX_CONTROL program (popup + cl_gui_picture control), and you combine it with BCALV_TREE_04 (cl_gui_alv_tree) to replace cl_gui_picture. You may access all demos from menu SE38, Environment, Examples (and finally Controls Examples in your case)

Looking for a way to create a pop-up menu with two sub-layers

I'm looking for a solution in Fireworks CS3: creating a
pop-up menu which goes two deep instead of the standard one-deep.
TOP LEVEL > SECOND LEVEL > THIRD LEVEL
Does anyone know if this is possible?
Thanks!

http://www.projectseven.com/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jim Babbage .:CMX:. & .:Adobe Community Expert:."
<[email protected]> wrote in message
news:ga4amp$4ci$[email protected]..
> paulkirtley wrote:
>> I'm looking for a solution in Fireworks CS3:
creating a pop-up menu
>> which goes two deep instead of the standard
one-deep. TOP LEVEL >
>> SECOND LEVEL > THIRD LEVEL
>>
>> Does anyone know if this is possible?
>>
>> Thanks!
>>
> Please don't so this in FW. FW is primarily a web
graphics and prototyping
> tool, not a web page creator. There are better options
out there, both
> free and commercial.
>
> Check out Project Seven for several options in this
area.
>
> --
> Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
>
http://www.communityMX.com/
> CommunityMX - Free Resources:
>
http://www.communitymx.com/free.cfm
> ---
> .:Adobe Community Expert for Fireworks:.
> Adobe Community Expert
>
http://tinyurl.com/2a7dyp
> ---
> See my work on Flickr
>
http://www.flickr.com/photos/jim_babbage/

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

How to create a pop up window with text information?

Hi experts,
I am a newbie in LC and I have created a form to be sent to the vendors by our buyers. Everything seems fine except the Accounting Manager would like to include our Financial Details in the form. I would like to simply create a pop up window with the information which will be activated by pressing a button. I have tried to create an invisible button and a visible button to achieve this but didn't succeed.
p.s. I have no javascript background but slowly learning. I would appreciate if anyone can assist me to complete the task.
Thanks a million.

Hi Mdjco,
Thanks for replying. What I need to accomplish is to have another page of information with all the financial details on the pop up window and the vendor has a choice to print it out or not. After the form is filled out, it is to be sent back to our buyers. So instead of me inserting a 2nd page with the information, I would like to hide it unless someone presses a button to show it.
I have found something like making 2 buttons, one is invisible with all the information on it and the other one "visible" to activate the invisble button. Didn't work at all.
Also another question is after the vendor insert the digital signature, it automatically asked to save (which I found out why from help) and then it opens up the email and sends the form as XML. I will need it to send as PDF, possible??
Much appreciated.

Is it possible to create a 1 D array with the "build array VI"? when receiving random number

Hello all,
Is it possible to create a 1 D array with the "build array VI" when receiving random number?
I am receiving random data and the build array VI always create a 2D array which might cause some problem if you want to compute certain type of operation after.
Any example will be welcomed.
Thank you,
Israel

Hello Lynn and Yamaeda
First I want to Thank you Lynn for your linguistic contribution indeed "Build Array" is a primitive and not VI, thank you for the education. In reality what I am doing is simple.
I have two arrays of complex elements Array1 and Array2.
Array1 conains the complex elements ""(a0+ib0) ; (a1+ib1) ;...(an+ibn) ;
Array2 conains the complex elements ""(c0+id0) ; (c1+id1) ;...(cn+idn)
What I want to do is the multiplication of the first array by the conjugate of the second array element.
Array1*(Conjugate Array 2)" for the first element the results is "(a0.C0-b0.d0) + i(b0c0-a0d0)" and the etc...
and then taking the square root ([(a0.C0-b0.d0) power of 2]) + [(b0c0-a0d0) power of 2])
I was wondering if there were some dedicate primitive that could solve the computation above which is the cross correlation in Frequency domain.
Thank you very much.
Israel

Is it possible to create a drop down menu using form fields rather than text?

Is it possible to create a drop down menu using form fields rather than text?

Yes, correct - values of form fields. If one is blank, then the field would be blank - yes? If two or more have the same value that is fine.
A standard dropdown ... As shown here. If there is an easier way to do this, I'd love to hear your suggestions. Thank you!

How to create a Pop-up menu for an Applet

I need to create a Pop-up menu that works like this:
When the user move his mouse over the applet, the menu will pop up, extending beyond the bounds of the applet.
In other words: The applet will display only the menu headings - a mouse-over should cascade a menu beneath the heading - once again: beyond the bounds of the applet.
(Hopefully, the end result will look and work pretty much like a DHTML menu that uses <div>'s.)
I thought of popping up a JFrame to act as the menu - however, the JFrame has its own title bar.
Any ideas!?

OK - I tried using a JMenuBar - and it does cascade out of the Applet box. The question is:
How do I close the menu without clicking on the Applet box? - i.e. if the user clicks on the web-page, or simply waits a second or 2, the menu should collapse?
Any ideas?

How to create a pop up menu or option in labview?

Hi to all,
Just want to ask, how do u create a pop up menu? when you click on a certain button, another view or option would appear like series of texts or instructions. thanks again. thanks

jmvrd wrote:
Also, how can i create a play button? a button that will run the whole program instead pressing the run mode itself. thanks
You don't actually create a play button. You need to create an architecture that has your program idle until something happens. A while loop with an event structure within it will do that. See the "Login dialog" example that ships with LabVIEW for an example of how to use an event structure. Depending on how complex you need your program to be, you may need to look into using a state machine, master-slave, or producer-consumer architecture.

Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?

Hi All,
Is it possible to create a two node cluster with SQL server 2012 STD on node1 and SQL Server 2008 ENT on node2 on a Windows server 2012?
aa

I think you are confused with the way cluster is installed. Installing SQL on cluster is a two step process. On first node you create a new SQL cluster and on second node you need "AddNode" action.
Same edition media has to be used in above two operation.
you can install two separate instances with one enterprise and one standard.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Possibility to create a 2-ary menu

Hi,
I am new to Web Dynpro. As far as I have read and hopefully understood the articles there is no context menu at the moment in the WD framework.
There is the possibility to create a menu in the tray element.
BUT: Is this menu only for a 1-ary menu or is it possible to create a multiple ary menu like
myCustomer > Serach
           > Edit
           > Delete
All Customers > Search
              > Edit
              > Delete
etc.
Thanks in advance
Ralph

Nested menus will be available in coming versions, I do not know in which service pack.
Armin

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen?

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen? An if-then statement perhaps? I am looking to add over 100 drop down options and would like to have a message automatically pop up depending one which option they chose. Thank you.

Hi,
You would use the skip logic to conditionally show form items based on the selection within the drop-down menu. Here's a link to a description of the feature in our help documentation:
http://help.adobe.com/en_US/formscentral/using/WSd789abd336388b1642c7fce012da94afe4f-8000. html#WS0faeceb8c23f5d60-774f03e3131ddc76d7d-8000
Regards,
Brian

How do I create a drop down menu with multiple items in Adobe Acrobat 9?

I am trying to create a drop down menu with four items within a field box. When I try to do this
the font is too big and it just doesn't fit.

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

How do i get that little pop up menu with all the editing choices on it that i used to get? Is there a way to get the editing box to pop up as I make a new event instead of editing an event after i just made it ??????

Michal,
iCal Help is a good place to start. Here are a couple of examples:

Using TreeViewer and creating a pop-up menu?

I am using Eclipse Ganymede(3.1?) to write my program. This project has multiple parts(most issues/progress can be tracked back in java-forums.org) and I am trying to get the last bit of my GUI finished. I have a TreeViewer that displays on top of a composite display(not a component) which is why I haven't been able to find a solution that works for me. My tree is interactive(double click nodes to expand, deepest nodes open up an editor view, auto refresh new nodes/deletes etc) and I'm trying to make a pop-up menu appear on right click that would give all the options the File menu gives. I haven't been able to find a work around on how to attach the menu since my TreeViewer is based on a composite instead of a component there is no where to attach the menu. I have been working on this one issue for a week with no progress and am at the point where I'm tempted to rewrite my entire project using JPanel and JPanes and Tree but I REALLY don't want to have to do this. This is my createPartControl method with the relevent sections.
public void createPartControl(final Composite parent) {
//          final Tree tree = new Tree(parent, SWT.MULTI | SWT.H_SCROLL | SWT.V_SCROLL | SWT.BORDER);
          treeViewer = new TreeViewer(parent, SWT.MULTI | SWT.H_SCROLL | SWT.V_SCROLL | SWT.BORDER);
//          treeViewer = new TreeViewer(tree);
          treeViewer.setContentProvider(new ViewContentProvider());
          treeViewer.setLabelProvider(new ViewLabelProvider());
          treeViewer.setInput(createDummyModel());
//Double click listener
          treeViewer.addOpenListener(new IOpenListener() {
               public void open(final OpenEvent event) {
                    //double click expands/shrinks nodes, opens up target editors
//Selection listener
          treeViewer.addSelectionChangedListener(new ISelectionChangedListener() {
                  public void selectionChanged(SelectionChangedEvent event) {
                       final IActionBars bars = getViewSite().getActionBars();
                       selObj = ((IStructuredSelection) event.getSelection()).getFirstElement();
                                  //...outputs selection to status bar
//Mouse listener
          treeViewer.getTree().addMouseListener(new MouseAdapter(){
             public void mouseUp(MouseEvent event){
                  if(event.button==3){         //right click
                       System.out.println(event.getSource());        //Tree{ }
                       System.out.println(event.display);             //org.eclipse.swt.widgets.Display@1e328e0
                       if(selObj instanceof Server){
                            System.out.println(treeViewer.getControl().toString());          //Same as event.getSource()
                                           /*code to have menu appear goes here*/
                            System.out.println("Server Menu");
                            //Delete Server
                            //Edit Server
                            //View Properties
     }Does anybody know a way I can attach a popup menu to the node I click on or if it's possible(and if so how would I go about) attaching it to the display beneath the TreeViewer and somehow setting the focus or making the popup a heavy component so it would appear on top?
P.S there's alot more superfluous code in the listeners but they don't pertain to this so I removed them.

Can anyone confirm that what I'm trying to do is not possible? I found this link which states an SWT bug of the header not being a control so it become unattachable. http://dev.eclipse.org/newslists/news.eclipse.platform.swt/msg38040.html
Any truth in this and if so where can I track progress of the bug?

Is it possible to create a pop-up menu with sub-headings

Similar Messages

Maybe you are looking for