Is it possible to create a "sub" playlist within another?

Hello,
For example, can you create a U2 playlist?...and then within that, create playlists for their albums?
Thanks,
Steve

I don't think you can do a "sub" playlist. But you can do some pretty tricky things with smart playlists. You can create a non-smart U2 playlist, and then do smart playlists based on your original U2 playlist.
Do this: make a non-smart playlist called "allU2".
Browse (click on the eyeball in the upper right) your way to U2, then select all those songs, drag 'em to your "allU2" playlist. You now have a regular playlist with all of your U2 in it.
Now make a smart playlist called "Achtung Baby" or whatever album you want.
When you're creating your smart playlist you wanna do this:
checkmark "match all of the following"
->Playlist ->Contains ->allU2 (then click the "+" sign to add another rule)
->Album ->Contains ->Achtung Baby
That's how you would make a "sub" playlist based on a playlist, but really that was just an exercise in making playlists. In order to create a playlist to listen to specific albums, you don't even need to mess with multiple playlists. Just do this: create a smart playlist title "achtung baby":
"match all of the following"
->artist ->contains ->U2
->album ->contains ->achtung baby
Or forget the "artist" line and have just this in your smart playlist:
->album ->contains ->achtung baby
OR, (lemmee see how long I can ramble on here), you could forgo the entire playlist trip and listen to albums through "Browse". Click Browse. In the Artists column scroll down to U2. You'll get a list of all your U2 albums in the righthand column and a list of all your U2 songs below. In albums click on whatever album you want. The songs list will only show songs from whatever album you clicked. You can play just those songs.
Or open-apple click on multiple albums to highlight multiple albums. You can then listen to U2 songs from multiple albums.
I love fiddling around with playlists.
One of my favorite smart playlists (I'm listening to it right now):
smart playlist titled "5* not played 1 week":
Match ->all of the following:
->Last played ->is not in the last ->1 ->weeks
->My rating ->is ->***
down below click a checkmark next to: Live Updating
That playlist only plays songs that are 5 stars that I haven't listened to in the last week.
Good luck and have fun! If you have any questions about playlists, post 'em here and I'll be more than happy to help you out.
Jerry
1.42ghz mini   Mac OS X (10.4.3)   1 gb ram, 17" dell

Similar Messages

  • How can I create a sub-folder within my "Documents" folder?

    How can I create a sub-folder within my "Documents" folder? I have many similar documents that I want to group together. This will also un-clutter my Documents folder.

    Also, you can add a New Folder button to the Finder's toolbar by opening Finder, going to the View menu in the menubar, selecting Customize Toolbar..., and dragging the New Folder icon to the toolbar in the Finder window. Then it's just one-click for new folders wherever you want them.

  • Is it possible to create a menu structure within iWeb with a so called tree layout? iWeb only provides automatically a horizontal layout

    Is it possible to create a menu structure within iWeb with a so called tree layout? iWeb only provides automatically a horizontal layout

    Not in iWeb itself.
    You have to create these menus yourself. Start here :
         A List Apart: Articles: Suckerfish Dropdowns
    Also, see podcast episode 9 of
         CSS Tricks and Tips
    and then add them to a webpage with the HTML Snippet.
    Or add the menu to the webpage with a JavaScript.
    Here's a sample page :
         http://www.wyodor.net/mfi/roodhout/
         http://www.wyodor.net/mfi/spelling/
         http://www.wyodor.net/mfi/Maaskant/Some_Menus.html
    The how-to-do page are here and here.
    More sample pages on my Made for iPad with iWeb pages.
         http://www.wyodor.net/mfi/
    You may have to learn HTML, CSS, JavaScript, AJAX, DOM and how iWeb creates its pages.

  • Can we create a sub Event within the main Event in iPhoto?

    I would like to reduce the amount of Events I have showing in iPhoto, to one Event for one catogory and then create sub events within this main Event.
    For example.
    Create 'Holidays' for Main Event
    Then various sub Events within 'Holidays' showing destinations for each holiday with the photos.
    Regards
    John

    This is what Larry is referring to:
    OT

  • Is it possible to create a public playlist on itunes?

    A couple of years ago, iTunes users were able to create public playlists in iTunes for everyone to enjoy. They would create compilations of their favorite songs or score, and anyone could go through their selection and buy it if they like it. Does it still exist?

    Unfortunately, no.  It disappeared somewhere around the release of iTunes 11 last year.

  • Can I create Composer sub-playlists in Classical Music?

    I made the terrible mistake of upgrading to itunes 11. I've managed to mostly get it the way I want it with the exception of my Classical Music. In itunes 10 I had playlists for each composer under the Classical Music heading, which was the easiest way to sort things. Now I just have a list of tracks by composer, and it's impossible to navigate. I can't figure out a way to change this, and am thinking about reinstalling 10.7, but that looks painfully difficult - does anyone have any suggestions? Thanks.

    Use MetaZ to tag the files as TV Shows and the correct series and all other info.
    -> http://www.macupdate.com/app/mac/36029/metaz

  • Is it possible to create a new List from another List's template and NOT carry over the associated Workflow?

    Related to
    this post, in cases where it's desirable to have two different workflows for two different Lists—is it possible to NOT bring forward a hardwired workflow when creating a new List from a saved template?
    I.e. List #2 still has the workflow from List #1 hardwired in.  List #1 still needs its workflow but List #2 wants to have a separate Workflow.

    More importantly, because it's relatively easy for most folks to just start from scratch with a new Workflow—how does one disassociate a carried-over Workflow from the new List?
    Use the web-GUI. (List Settings > Workflow Settings)
    From Designer, there's a shortcut button at the top of the page in the Workflows tab: "Administration Web Page".

  • Is it possible to create different font styles within the same text field?

    The form I am creating is getting really complex because when different fields require different font treatments (bold, italic, different font size, different font) I have to create a seperate text box and get it to align with the others. This wouldn't be an issue in most cases but this form is really detailed and has many text boxes. Before I stuggle too much longer on it, I thought I would check and see if there is a way to make them all in the same text field. If not, perhaps I am trying to use Acrobat for something it is not meant for. Any recommendations on other programs I could use? Thanks

    Thank you try76. I'm not sure if I did it correctly. As soon as I tick the Rich Text Formatting box it automatically changes the appearance of the text in the field (Helvetica Light to something like Helvetica Heavy) I can't seem to get the font back to Helvetica light or change the font size while the Rich Text Formatting box is ticked.

  • Is it possible to create an "interactive table" within acrobat?

    I am trying to create and shorten an existing large document, and one option that would be very helpful is to have a drop down table selection.  To elaborate:
    have a selection button that would allow user to select a specific option, then this option would bring up or allow a selectable table - the tables would be multi-entry tables which users of the document can enter in data within the table fields - can this be done?
    One other option could be the selection button does not have to "pull" up the specific table or be directly linked, but as long as the users can make a selection in one field, then select a specific table...this would work.  So to simplify this, can multiple tables be inserted into a drop down menu?

    thanks again - I really think that layout will really work and I can make the initial top level drop down specific to the equipment and the tables or text fields below that will really work.
    now what would be the best avenue to add additional entry fields into each?  can I just do a "select object" and copy / paste this below the existing?
    here is example of the tables:
    EQUIPMENT VERSION 1 TEST 1
    PARAMETER
    VALUE
    BASE PRESSURE
    START PRESSURE
    END PRESSURE
    SYSTEM VOLUME
    ACCEPTANCE THRESHOLD
    EQUIPMENT VERSION 2 TEST 3
    TIME
    PRESSURE
    COMMENT
    TIME
    PRESSURE
    COMMENT
    0
    1
    2
    3
    4
    5
    6
    The remaininig cells will allow user to enter in basic data taken from tests they are performing on the equipment, but the tables (created here in the discussion) will look very similar to these two tables....and they will slighly vary with some of the cell assignments between one type of equipment to the next ) which again I want to create a "drop down" selection at the header of the page that will select the specific equipment.
    and thanks again for the helpful info  -

  • Creating A Sub-Mix?

    Hello Everyone,
    I am pretty much a novice in Logic 7.I know that it is possible to create a submix(the same tracks in the song with a different master effect) of the current track that I am working on. This is my objective:
    I have 4 vocal audio tracks and 8 Midi Instr. Tracks. I want my tracks in an 8 bar long low pass/next door sound type effect with Reason Flatblaster as the into and I want it to fade/or transition the same tracks into the original sound for the rest of the track. Is it possible to create a sub mix and not have to bus each track into the effect and automate the level of effect to transition. Also if i can create a sub mix, do i have to copy my original tracks and if so how do i do it?
    Any advice would help greatly. thank you for your time. Also if you have you feel I need to make my objective more clear....I can explain more if you let me know. Thanks Again
    -Adam Bartolomeo
    Dual 1.8Ghz Power Mac G5   Mac OS X (10.3.7)   Logic 7

    Unless I need to save screen space or processing power, I will build a sub mix using the busses.
    So I want to filter the drums, and automate the filter over time:
    - Send the output of the drumtracks to stereo bus 1
    - Add the filter plugin to the bus
    - Add the bus to the arrange window
    - Automate the plugin
    Or
    I want to get a better perspective on my mix, it's all too much and I'm confused.
    - Create 4 to 8 busses
    - Assign the outputs of my various elements to stereo bus outputs
    - - bus 1: drums
    - - bus 2: bass
    - - bus 3: atmosphere
    - - bus 4: keyboad
    - - bus 5: backing vocals
    - - bus 6: lead vocals
    - Mix the buses to get better imaging, and leveling.
    Hope that makes sense, and helps at all...

  • 2 ipods , 1 itunes, "sub" playlists

    Hi All,
    I have been reading through the discussions and I have figured out that if I want 2 ipods off one Itunes I just creat 2 playlists for each person. However can I then create "sub" playlists within these folders? Or do I have to just choose by album, genre etc??
    Thanks

    Hi Charlotte,
    No, iTunes does not allow you to create "sub" playlists. What you can do (with iTunes 5), is create folders to group several lists, but they will not appear on your iPod.
    The other thing you can do is select more than one playlist for each iPod. Go to: Edit->Preferences->iPod and choose "sync checked playlists only" instead of "sync all". Then check all those lists you want on that iPod.

  • Possibility of creating combination chart Barchart/Line graph within OBIEE

    Hi
    Is it possible to create a combination chart within OBIEE as can be done in Excel by changing the chart type on one of the individual series - ie graph multiple series of data as a combination of Barchart & Line series?
    Any info appreciated
    Thanks & Regards
    K

    The charting can be as dynamic as you like if you willing to pre-configure the required options.
    Simply create as many charts as you want from one request, and use a view selector to allow the user to switch between them.
    You can use level based measures and any else you want as seperate columns (all in same request) then chart them accordingly.
    Hope this helps

  • Creating New Entity Instances within OPA

    This is another one that I think I know the answer to, but I think it is best to confirm.
    In prior versions, it was not possible to create entity instances within RuleBurst/Haley Office Rules. Is that still the case in OPA?
    For example, my rules are determining the status of a case and the reason(s) why that status was determined. The case status may be Denied and the reasons may be "invalid customer Id", "expenses to income ratio too high", "primary customer not employed long enough", etc. I want to return all the reasons for the status. While the list of reasons is pre-determined, the ones that apply to a particular case are dynamic, as any, but not all can apply.
    Given this situation using a database, I would create an instance of reason for each applicable one and link it to the case. In the past, with OPA's predecessor(s), it was not possible to create new instances from within. They either had to all be passed into the rulebase or a list of all allowable reasons attributes had to be created and then set to true for the ones that applied.
    My preference is to create the instances inside OPA. Is that functionality provided in the current version?
    Thanks,
    Terry

    Hi Terry,
    Michael is correct that you can't write rules at design time which will dynamically create new entity instances at runtime. However, perhaps the new inferred relationships functionality in v10 could address what you're trying to do.
    You can write rules which conclude membership of an inferred relationship. So you might always have, say, 10 instances of 'the reason' in every case, but as for which of those instances apply in any particular case, it depends on the details of the case. You could use an inferred relationship to collect up the entity instances which apply in the case.
    First you'd need to set up a regular one-to-many relationship to instantiate the 10 instances at runtime - this would be done in the usual way. Then you'd also need to set up an inferred relationship and write rules to conclude the members of the inferred relationship. The instances which are members of the inferred relationship are then effectively the list of entity instances you wanted to create in your example above.
    Have a look at this OPM Help article: http://www.oracle.com/technology/products/applications/policy-automation/help/opm10_1/Content/Rules%20using%20entity%20instances/Reason_about_relship_between_2_entities.htm
    Cheers,
    Jasmine

  • What is the table to view all sub-areas within a company code?

    Hi Experts!
    What is the table to view all sub-areas within a company code?
    I just need as detailed of a list as possible of ALL the sub-areas within a specific company code.
    Thanks!

    Txn SPRO
    IMG --> Enterprise structure --> Definition --> Human Resources Mgmt --> Personnel Subareas --> Copy, delete, check personnel subarea
    Button "Structure", then "Navigation", check next screen.
    You'll get all Personnel Subareas
    Then, menu "Edit - Display all objects" and choose "Company Code"
    Choose your company code... you'll get a screen with Company Codes with Personnel Area and Personnel Subarea
    Regards.

  • Creating "Sub-Playlists"

    Does anyone know if it is possible to create a playlist that when selected, opens a list of other playlists, similar to how you can have folders and sub-folders in Windows? A few months ago I downloaded a Spanish translator from CoolGorilla.com, and they managed to do something similar. You would go into the "Notes" section, select a subject, then a more refined subject, and then finally a phrase, which would then open an audio file of a spanish-speaking lady repeating the phrase over and over. Please respond. Thanks.

    I'll be honest, you lost me with the Spanish translator from CoolGorilla.com, Ryno JvR, but, for what it's worth, you can put your playlists into folders in iTunes and put folders into other folders.
    Have a look at this article in the Apple Knowledge Base and let us know if it solves your problem.

Maybe you are looking for

  • Extracting WAV files from CD's to hard disk

    Hi, Can iTunes v6.0.4 be used to copy the songs from a CD to the hard drive? I have many store bought CD's that I would like to copy to my hard drive in WAV format. I don't see any way for iTunes to do this. Is it possible? If not, are there any comm

  • Google Finance gadge on iGoogle does not seem to work in Firefox, works on IE and Chrome.

    I am running Windows 72-bit with the latest patches. Also, running Firefox 8.0.1. For the last couple of weeks, I have noticed that iGoogle page loads ok, but the Google Finance gadget does not load. It just shows zeros in three rows. At the same tim

  • How to read data from buffer while validating in sm30

    Hi all.      I am doing validations in sm30 by using events.The user is entering the data thru sm30 (multiple records at a time) Before the data gets saved into database table it might be storing in some buffer. Can you pls tell me where this data is

  • Phone in recovery mode after update???

    Update did not work, now i have discovered how to turn the phone back on as it wouldn't  it says i must restore it. Seriously?

  • Service Contract Address Error

    Dear Experts , Facing an error in the Service Contract(CRMD_ORDER) - Address doesn't exist when the BP is existing and has an active address. Also facing an error at the BP level saying - Partner Address doesn't exist (AM013) . Have checked the relev