Is it possible to create an accessible text record of the bookmarks in a pdf

I am using Adobe 9.0 0. My pdf has a large number of bookmarks, which I want to check against other sources. I wish to create a list that I can copy and paste elsewhere.

With EEM 2.4 and later, you could correlate multiple events in an applet. See
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6815/whitepaper_c11-492226.html
or https://supportforums.cisco.com/thread/2049656 for an actual example.

Similar Messages

Possible to create a hyperlink in excel to a bookmark in a PDF?

My boss would like to be able to click on a hyperlink in excel, and it would take him directly to a bookmarked item in a PDF. After searching I've come up empty handed. Is this even possible? He swears he's seen it done before, but then again, he's been wrong in the past - so who knows.
Any help is appreciated!

No, it's not possible.

Is it possible to create a Large Text Field in OCOD, more than 255 Char?

Is it possible to Create a Long Text Field (more than 255 Char Long) as like Description field in OCOD?

Not at this time.

Is it possible to Create a Long Text Field (more than 255 Char Long)?

Is it possible to Create a Long Text Field (more than 255 Char Long) as like Description field in Service Request Object??
Thanks!

Hi
User can only create custom Long text field (255 Charcter) . Currently system does not support custom note creation

Is it possible to create a generic report that accepts the SQL as a param

Is it possible to create a generic report that accepts the FULL sql statement as a paramater and returns variable results based on this?
We have a requirement to have a generic export routine to spit out csv's from clicking on a web page hyperlink, which would need to accept a "new" sql statement for every run, each containing different columsn etc that would be needed in the output.
I was hoping could have a generic Oracle report, exporting delimited data format (and as such not using a layout) and somehow pass in the "new" sql statement as a parameter at run time - each sql statement would be different with different columns etc.
Is this possible with oracle reports ?
thanks

If you need a simple dump of data you could try writing a report with a simple query such as
select 'Report title or column headers'
from dual
&data_query
then your &data_query parameter could be
union select col1||','||col2 from data_table
If you are outputing a comma separated data dump the you can concatenate together your data into a single text field.
This would allow you to have a simple heading followed by the actual data. I guess you could extend this so that the 'Report title or column headers' from the first query was also a parameter to output your row headings i.e.
select :column_headings_text
from dual
&data_query
Give it a go and good luck

Is it possible to create a variable in bex with the last work day?

Hi Gurus
Is it possible to create a variable in bex with the last work day?
Actually end-user every day open queries,
    - Put in selection date day - 1 or
    - put last Friday if the day is Monday or
    - put last Thursday if the day is Monday and Friday is holiday (in a calendar for example 25 the December).
Please do the needful. It is urgent
Thanks in advance
Raj

Try this logic in a customer exit:
DATA: l_s_range TYPE rsr_s_rangesid.
DATA: X_PERIOD LIKE T009B-POPER,
           X_YEAR   LIKE T009B-BDATJ.
CASE I_VNAM.
WHEN 'ZPREVWORKDAY'.
    DATA: l_DayOfWeek(1) TYPE C,
          l_act_date     TYPE d,
          l_prev_date    TYPE d.
    l_act_date = sy-datum.
    CALL FUNCTION 'DATE_COMPUTE_DAY'
         EXPORTING DATE = l_act_date
         IMPORTING DAY = l_DayOfWeek.
    CASE l_DayOfWeek.
      WHEN '1'.
        l_prev_date = l_act_date - 3.
      WHEN '2'.
        l_prev_date = l_act_date - 1.
      WHEN '3'.
        l_prev_date = l_act_date - 1.
      WHEN '4'.
        l_prev_date = l_act_date - 1.
      WHEN '5'.
        l_prev_date = l_act_date - 1.
      WHEN '6'.
        l_prev_date = l_act_date - 1.
      WHEN '7'.
        l_prev_date = l_act_date - 2.
    ENDCASE.
    l_s_range-low = l_prev_date.
    APPEND l_s_range TO e_t_range.
ENDCASE.
Edited by: Tyler Blouse on Feb 13, 2008 8:28 PM

Is it possible to create an album in gallery on the iPad or do you have to do it on your computer?

Is it possible to create an album in gallery on the iPad or do you have to do it on your computer?

Thanks, how about in gallery on MobileMe ? As I am not near my computer for the next 3 weeks so can't do a cable sync do you think I could create and album in gallery on mobile me on a "borrowed" computer and do it throughout the cloud?

Is it possible to create a 1 D array with the "build array VI"? when receiving random number

Hello all,
Is it possible to create a 1 D array with the "build array VI" when receiving random number?
I am receiving random data and the build array VI always create a 2D array which might cause some problem if you want to compute certain type of operation after.
Any example will be welcomed.
Thank you,
Israel

Hello Lynn and Yamaeda
First I want to Thank you Lynn for your linguistic contribution indeed "Build Array" is a primitive and not VI, thank you for the education. In reality what I am doing is simple.
I have two arrays of complex elements Array1 and Array2.
Array1 conains the complex elements ""(a0+ib0) ; (a1+ib1) ;...(an+ibn) ;
Array2 conains the complex elements ""(c0+id0) ; (c1+id1) ;...(cn+idn)
What I want to do is the multiplication of the first array by the conjugate of the second array element.
Array1*(Conjugate Array 2)" for the first element the results is "(a0.C0-b0.d0) + i(b0c0-a0d0)" and the etc...
and then taking the square root ([(a0.C0-b0.d0) power of 2]) + [(b0c0-a0d0) power of 2])
I was wondering if there were some dedicate primitive that could solve the computation above which is the cross correlation in Frequency domain.
Thank you very much.
Israel

Is it possible to have multiple different texts conversations with the same two people?

In iOS 8.1.3 is it possible to have multiple different text conversations with the same person? I'm looking for a way to set an old conversation aside to talk about something new.
Is this possible?

speculation is agaisnt the ToS here, but you never know (I was shocked when we got 8 track recording in GB2)
best thing to do is to send Apple some Feedback and let them know what features you want (they really do read what's sent):
http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
(Let the page FULLY load. The link to your answer is at the top of your screen)

Is it possible to create a view where table in the From clause changes name

is it possible to create a view from a from a table like this
create view my_view as select id, col1, col2, result from <<my_latest_cacahe_table>>;
the table in the from clause changes the name .
I have another table which indicates the the latest name of my cache tables. Always there are two records there. The latest one and previous one.
select * from cache_table_def
table_name cache_table_name refresh_date
my_table cache_table245 1/23/2012
my_table cache_table235 1/22/2012
create table cache_table_def (table_name varchar2(25), cache_table_name varchar2(25), refresh_date date);
insert into cache_table_def values( 'my_table','cache_table245','23-jan-2012');
insert into cache_table_def values ( 'my_table','cache_table546','22-jan-2012');
create table cache_table245 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table245 values(1, 'test123', 'test345',12.12);
insert into cache_table245 values (2, 'test223', 'test245',112.12);
create table cache_table235 (id number, col1 varchar2(50), col2 varchar2(20), result number);
insert into cache_table235 values (1, 'test123', 'test345',92.12);
insert into cache_table235 values (2, 'test223', 'test245',222.12);
what I need to do is find the latest cache_table name for my_table and use that in my view defintion
When user select from the the view it always reurns the data from the latest cache_table
is it possible to do something like this in oracle 11g?
I have no control on the cache tables names. that is why I need to use the latest name from the table.
Any ideas really appreciated.

I've worked up an example that does what you ask. It uses the SCOTT schema EMP table. Make two copies of the EMP table, EMP1 and EMP2. I deleted dept 20 from emp1 and deleted dept 30 from emp2 so I could see that the result set really came from a different table.
-- create a context to hold an environment variable - this will be the table name we want the view to query from
create or replace context VIEW_CTX using SET_VIEW_FLAG;
-- create the procedure specified for the context
- we will pass in the name of the table to query from
create or replace procedure SET_VIEW_FLAG ( p_table_name in varchar2 default 'EMP')
as
begin
dbms_session.set_context( 'VIEW_CTX', 'TABLE_NAME', upper(p_table_name));
end;
-- these are the three queries - one for each table - none of them will return data until you set the context variable.
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' );
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- this is how you set the context variable depending on the table you want the view to query
exec set_view_flag( p_table_name => 'EMP' );
exec set_view_flag( p_table_name => 'EMP1' );
exec set_view_flag( p_table_name => 'EMP2');
-- this will show you the current value of the context variable
SELECT sys_context( 'VIEW_CTX', 'TABLE_NAME' ) FROM DUAL
-- this is the view definition - it does a UNION ALL of the three queries but only one will actually return data
CREATE VIEW THREE_TABLE_EMP_VIEW AS
select * from emp where 'EMP' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp1 where 'EMP1' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
union all
select * from emp2 where 'EMP2' = sys_context( 'VIEW_CTX', 'TABLE_NAME' )
-- first time - no data since context variable hasn't been set yet
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP table
exec set_view_flag( p_table_name => 'EMP' );
SELECT * FROM THREE_TABLE_EMP_VIEW
-- get data from the EMP2 table
exec set_view_flag( p_table_name => 'EMP2');
SELECT * FROM THREE_TABLE_EMP_VIEW
For your use case you just have to call the context procedure whenever you want to switch tables. You can union all as many queries as you want and can even put WHERE clause conditions based on other filtering criteria if you want. I have used this approach with report views so that one view can be used to roll up report data different ways or for different regions, report periods (weekly, quarterly, etc). I usually use this in a stored procedure that returns a REF CURSOR to the client. The client requests a weekly report and provides a date, the procedure calculates the START/END date based on the one date provided and sets context variables that the view uses in the WHERE clause for filtering.
For reporting it works great!

Is it possible to create l3vpn without enabling mpls in the core and PE routers .

Hi
i have below setup , in this PE1,P,PE2 routers do not have mpls support , it have only MGRE and GRE tunnel support ,
is it possible to create l3vpn without mpls here .
bgp session between PE1 and PE2,
CE1---------------PE1-----------------P---------------PE2------------CE2 .
PE1,P,PE2 do not have mpls support .
Thanks
Duraipandi

hi durai,
you can use the vrf-lite model but this is complex to manage in larger networks.
for example:
CE1 ---PE----core(x)---P------PE---CE1
CE2 --/ \----CE2
in this case, without mpls, I need to create on the core(x) link 2 vrf's with 2 vlans to go to "P".
and the same on the other PE and link.
Now if you think that there are more P's with backup paths or more CE's that linkage exponentially increases to define those vlans and in all your P routers is that awareness of every CE route!
MPLS just simplifies this; single core link,by just using labels. Your P routers only see PE next hops and are opaque to the number of vrf's you carry/service. Adding another P or PE device integrates into the routing naturally and MP BGP takes care of the PE advertisement. So expanding and rerouting are more natural and graceful here too.
So while technically MPLS can be omitted, it is just not a smart thing to do from a design perspective in l3vpn.
cheers!
xander

Very important question need immediate answer please very serious, is there any way possible i can get recent text messages from the last 2 days and print them off after they have been deleted from my phone?

is there anyway i can retrieve recent text messages from the last 2 days and have them printed off after they have been deleted from my phone? this is seriously important i need this for an attourney!

click here:
Re: Can I request to get the content of old text messages

Is it possible to have icons for the main forward/back toolbar line and text only for the bookmark line in the toolbars?

In the customizing toolbars section it looks like you can either have icons and text, icons only or text only.
I'd like to have the toolbar with the back/forward buttons, home button, etc. be icon only and the toolbar below, which is the bookmark bar to be text only. I don't see how to do this.
Thanks.

See:
*Bookmarks Deiconizer: https://addons.mozilla.org/firefox/addon/bookmarks-deiconizer/

How do I show the anchor text instead of the link in a pdf?

I'm using Adobe Acrobat 7 to create a PDF.
I'm creating hyperlinks inside the PDF that link to Web links.
When the reader hovers over the text I want the anchor text to pop-up
instead of the Web link. How is this done?
For example:
If someone hovers their mouse over the text "click here for info" and
the link is "http://www.hyperlinkforinfo..com"
...I want "click here for info" to pop-up instead of "http://www.hyperlinkforinfo..com"
Thanks!

As you can observe by a look-see at Acrobat's Link Tool dialog, there is no facility for adding a "tool tip" or an alternate text description.
Nor can such be provided upfront in an authoring file and migrated into the output PDF.
While a properly developed Tagged PDF supports providing Alternate Text description for the <Link> element this is focused to AT applications.
Typically, entered Alt Text for the <Link> element will not "display" on screen ala "tool tip" idea.
Keep in mind that the feature set associated with a PDF link annotation is not at all the same as what is associated with HTML elements.
PDF (ISO 3200-1) and HTML (any flavor or 'recommendation') are rather different creatures.
Be well...

Web Service to Create a Document Info Record with attachments (e.g. PDF)

Hello guys,
we are looking forward to create a Web Service that should be able to create a Document Info Record on SAP ERP Application Server. As we don't have installed the SAP Standard Web Services on our SAP ERP ECC 6.0 system we will manually create a Web Service with the help of the standard BAPI_DOCUMENT_CREATE2.
The current problem is that the Web Service based on the Standard BAPI can not upload Files (PDF or Word files) from the Users Client PC to the Application Server.
Is there a possibility to Create a Web Service that can handle files and create DIRs on application server?
Thanks a lot!!
Regards,
Christian

Hello Natallia,
Well, in this case you don't really need the CV01N transaction. This represents the user interface (UI), and you only need an interface (that is, an API), which in SAP is represented by a BAPI
I'm not familiar with CRM, but I assume that at some point when saving a Service Contract, you have a BAdI, where you can check the status and insert some custom code.
So, all you have to do is call BAPI_DOCUMENT_CREATE or BAPI_DOCUMENT_CREATE2 (if available on your installed version), with the required attributes (this can be master data, classification, custom data...). After this function is called successfully, you should receive the document key (DOKAR, DOKNR, DOKVR, and DOKTL). Which you can also save in the Attachments tab.
Hope this helps,
Tudor

Is it possible to create an accessible text record of the bookmarks in a pdf

Similar Messages

Maybe you are looking for