Is it possible to disable "My Dashboard" but enable "My Briefing Books"?

for users to use briefing books,
"Personal Storage (My Folders and My Dashboard)" must be granted to corresponding users.
And then they can see the My Briefing Books list.
is it possible to disable "My Dashboard" but enable "My Briefing Books"?

Dear IvanaPe,
I am stupid and maybe I gave a bad description, sorry.
http://img80.imageshack.us/img80/1318/briefingbooks.png
The list only shows when "Personal Storage (My Folders and My Dashboard)" is granted to corresponding users,
however, when "Personal Storage (My Folders and My Dashboard)" is granted, they are also allowed to modified their "My dashboard"s.
My goal is to only allow users to use their "My Briefing Books" but not allow them to use their "My dashboard"s.
How to do this?

Similar Messages

Browser window maximize button disabled in IE but enabled in Mozilla

Hi,
There is contradictory behavior,if i launch an applet window it's maximization button hanging at the top right corner is disabled in IE but the same window if launched using Mozilla the maximization button is enabled and we are able to maximize the window too.
What could bet he reason and how we can resolve this to have the button enabled using IE too.Can I have solution

The code controlling the resize is something like below:
URL openWinUrl = new URL(urlCodeBase, "openwin.html?openurl="
+ url.toString() + ",wintitle=" + getTarget(adminTitle)
+ ",resize="+no +",width=770,height=585");
Setting resize as no works perfectly in windows platform (IE )but not in solaris (Mozilla).Can any one have solution why this is not working in Mozilla.

Disable Vertical scroll but enable Page down in Table control for BDC

Hello All
In my 4.6C sysem , i had enabled Scroll bar in table control by populating TABC-lines = <No of records>...Then when i try to capture the BDC recording of this , then the scrolling event is not captured in BDC , as we all know.....
So i put few buttons on the application bar as NEXT PAGE, NEXT LINE , PREV PAGE n PREV LINE...and i did the scrolling by writing the code manually in PAI...and that is getting captured in BDC so my problem is partially solved...
Now as u see..i have default working Scroll bar on my T.C..also i have my buttons on the application bar....i want to get rid of the vertical scrolling....so now i am NOT populating the TABC-lines field...But as soon as i do this , my buttons stopped also working...Any idea how to get rid of this ?
In short when i don't write : TABC-lines = no_of_records .....to remove vertical scroling.......my manual scrolling mechanism also getting disabled..
Is it possible to remove only vertical scrolling ?
Thanks in advance .
Nilesh

No reply from any one ???

Disable Delete option but enable edit option for a content item?

Hi,
Appreciate your input on this. The portal version being used here is 3.0.9.8.2.
I would like to have the following privileges setup for a content folder's items.
- one group can edit and delete items
- one group can edit but not delete items.
However looking at the access types available at the folder level - there are only "view only" , "edit style", "manage items", "own folder","create with approval".
The "manage" privilege is simply a catch all privilege. User can edit, checkin/out and also delete an item.
How do I prevent a user/group from deleting an item ? (or atleast disable the rendering of the 'X' delete icon?)
I did experiment with the audit option by enabling version control which is somewhat helpful in that I can preserve the older versions, but like above, I cannot enforce that.
regards
-Ananth

thanks for your answer Mr. Atkinson, that was excatly what I need. This is my code inside the event receiver:
public override void ListAdded(SPListEventProperties properties)
SPList list = properties.List;
list.AllowDeletion = false;
list.Update();
but the above code dont have any effect on the list, I have still the Item with DELETE THIS LIST in the listsettings.
do you know maybe why? or can I also debugg it?
thanks in advance
BR
Ahmad
SP 2013 & SPD 2013 & VS 2013 & MSSQL 2012

Disable array indicator but enable scroll bar ?

Dear All,
is there a way to disable an array without disabling the ability to scroll down with the mouse (scroll bar is also disabled if you choose disable in properties). The array indicator is clickable althoug not writable but causes confusion for the user...as if you can write something.
thank you .

Hi mbhatti2000,
- Could you put up a small example of what you mean?
If you just want to disable the array indicator and gray it out, then you can use the property shown below.
Regards,
Peter D
Attachments:
DisableIndicator.vi ‏9 KB

Is there a way to disable plugins globally, but enable them on a per-site basis?

Is there a way in Firefox to globally disable plugins and allow only certain sites to run them (i.e., a whitelist)? I've tried working with CAPS, but it doesn't seem to be able to turn off <embed> or <object> tags, only certain aspects of JavaScript. I know about FlashBlock, but I've heard it's easy to circumvent and isn't meant for security. NoScript has this ability, and it's great for my own PC, but I'm looking for something more simple that I can use on the PCs of my friends and relatives.

No, not in the basic Firefox build, and I haven't seen an extension with those features that is simple enough for the "average user" to use.
Flashblock only blocks Flash, Shockwave, and Authorware. Plugins like Java, Silverlight, and other aren't blocked by Flashblock. There is one manual control extension for JavaScript, Java, Flash, and Silverlight - Quick Java - https://addons.mozilla.org/en-US/firefox/addon/1237/ - but there is no "whitelist", only toolbar /statusbar buttons to toggle those plugins on/off.
As you mentioned, NoScript has features to block specific plugins from running automatically, and also has a "whitelist" so those plugins will run automatically on "trusted" websites, but getting the NoScript "whitelist" set up is a continuing job. It can be a frustrating extension to use for even "above-average users".
I use NoScript on my Windows desktop PC's as it is intended to be used - allowing JavaScript per domain / website by "allowing" or "temporarily allowing", but on my Linux netbook ''(900MHz processor and only 1GB of RAM)'' I have it set to ''Allow Scripts Globally'', so I don't have to allow JavaScript for each domain on every website I visit. When I first got that netbook I ran for a few months without blocking anything, but after Firefox getting stalled by too many unnecessary plugin presentations I installed Flashblock. After a few weeks I realized that Flashblock wasn't blocking enough of the plugins that were causing problems, so I switched to NoScript with ''Allow Scripts Globally'' selected. IMO, Linux is much less of a target than Windows PC's are as far as exploits and Malware are concerned.

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection. This is so that end users who are non technical are not disturbed and only the I.T is aware of the viruses in teh environment.Shahid Roofi

You could set policies which when a malware detected an action perform automatically without user interaction but there is no GPO which stop the notification, one reason could be that when notification keep appearing, then user will know something is wrong
otherwise why FEP should display any warning.

Is it possible to disable multiple logins?

Is it possible to disable multiple logins by the same user on different computers? I have network hosted user accounts. I need a way to NOT make it possible for user A to go to client Mac A, login and leave himself logged in there then go to client Mac B and login there also. This is creating some unpleasant effects on the server - naturally!
Any easy way to accomplish this? Perhaps through Profile Manager?
Thanks!

Simon,
Thanks for the reply but I need some elaboration.... "the "Login" preferences for users and groups".... what exactly are we referring to? I don't see such option (or atleast the way it's written), in either Server app or Profile Manager. Are we talking about the same OS X version?
Thanks.
P.S. Despite the fact that I have enabled the option in Profile Manager to logout all users on all computers after 30 minutes of inactivity, I have noticed that the iMac clients don't log out the users after the said time...

Is it possible for widgets in dashboard to float over other windows?

I'm trying to assess features in Mavericks in comparison to Snow Leopard (the OS I'm most familiar with). I usually read the Missing Manual for the new OSes, but haven't gotten to all areas yet - it's a big book!
Is it possible for widgets in dashboard to float over other windows?
I want to be able to see the calculator widget for example while I'm also working in a Bills template document in Word, or over my back account page while viewing in Safari. Or look at words in Thesaurus while viewing a document I'm writing in Word, or even an email in Mail. In OS 10.6 widgets on the dashboard float above the other windows, but I can see them both at the same time. It looks like Dashboard is all by itself in Mavericks. Is this the case and the only way to view widgets now, is by themselves in their own isolated environment? Any work around?
Thanks.

You can assign a "hot corner" with System preferences > Mission Control > Hot corners to bring up your dashboard anytime you want quickly by moving the mouse to the corner. Works really well.

Is it possible to disable the 'edit layout' link on the record detail page

Is it possible to disable the 'edit layout' link on the record detail page? Not the homepages, I know there is a switch for that, but I thought there was one for the detail pages?
I want to disable this as I dont want users saving their own layouts, they must stick to the related sections defined in the default layout. The problem is that if they are to have access to certain related lists when an opportunity is of a certain type but NOT other types. If they have saved the layout (using the 'Edit Layout' link), and change the record type, they will see related sections that have been set to 'Not available' in the default layout (ie step 4) for that 'type'.

Robbo, at this time it not possible to disable the Edit Layout on the record detail page.

Possible to disable crtl+alt+del button on HP Slate 500?

Hello
I was wondering if it is even possible to disable the crtl+alt+del button on HP Slate 500? As my company has me reviewing the unit to be possibly used within our company but one of the requirements is to be able to lock the tablet down. And one of the things they want is to prevent people from being able to use the crtl+alt+del to access task manager since the plan is to lock windows to one open application. But I can't see any settings in the bios to disable that button. And there are no oblivious options I can find on the Slate and the button does not appear to be controlled by a priority HP software product. The only other way I could think of doing it would be to somehow disable it from the registry.?

This can be done using the Pro version or higher of windows 7, using gpedit and/or administrative templates you can control everything a user account can do or not do.
gpedit.msc in a run command opens the group policy editor
http://technet.microsoft.com/en-us/library/cc753298.aspx

Is it possible to disable the optimized compiler in LabVIEW 2010

Hello,
I have a project that take 3 minutes in LabVIEW 8.6 to build and now with LabVIEW 2010 it take 10.5 minutes. 3x more longer.
In fact my project as 61 .lvproj for a total of 4300 vi's that take 1 hour to build. If I interpolate, the entire build process will take 3 hours in LabVIEW 2010. This is not acceptable
I know that the new compiler optimize the code for better performance, but if I don't need better performance.
Is it possible to disable the optimized compiler in LabVIEW 2010 with an INI key in LabVIEW.ini.
Dany Allard
Dany Allard
Solved!
Go to Solution.

Jarrod S. wrote:
One Application Builder setting you might try out to make builds go much more quickly is the Remove Unused Members of Project Libraries checkbox and the Modify Project Library File after Removi....
This can drastically cut down the build times. Note, however, that this option does not work well if your application will load external plug-in VIs when it runs, because the libraries of those plug-in VIs may conflict with the modified libraries in the executable file. If you don't have a plug-in architecture, this will not affect you.
The "Remove unused members of project libraries" was already selected but not the "Modify project library file after removing unused members" and selecting this cut the build time from 10.5 min to 4 min.
Thank you Jarrod for this tips
Dany
Dany Allard

It's possible to disable custom color from color picker?

Hi guys!
I've searched in the threads about color picker but I found anything about it...
It's possible to disable the option to select a custom color? I work in a enterprise who makes softwares to brazilian clients, and not everybody understands english phrases...
Another way it's to translate the option, but I don't know if is possible too.
Thanks!

You definitely need to add the stylesheet to the Scene, not to anything else. If you take my example and change
scene.getStylesheets()...
to
root.getStylesheets()...
you'll see that it won't work any more.
The difference between this and the css you used is that the css you used is applied to the display of the color picker button; you need to apply styles to the popup (the color palette), which is not contained in your VBox or AnchorPanes. Notice how the font has changed for the name of the color in the button, but it hasn't changed for the "Custom Color" label you are trying to remove.
Somewhere there is some code that is adding the VBox you are subclassing to a Scene, and setting that scene into a stage. Your best option (perhaps second best option, see below) is to find that code so you can add the stylesheet to the Scene itself.
If you're working within a framework someone else has written, and can't access or change the code where the scene is defined, you have another option that I can see. Every Node has a scene property that refers to the scene to which that node belongs. So you could observe changes to that property and when it's updated, add the stylesheet to the scene.
So here is a hack to make my original hack work, in the event that you cannot access the scene directly, for some reason:
final String suppressCustomColorCss = getClass().getResource( "noCustomColorPicker.css").toExternalForm();
colorPicker.sceneProperty().addListener(new ChangeListener<Scene>() {
@Override
public void changed(ObservableValue<? extends Scene> observable,
Scene oldScene, Scene newScene) {
if (newScene != null) {
List<String> cssClasses = newScene.getStylesheets();
if (!cssClasses.contains(suppressCustomColorCss)) {
cssClasses.add(suppressCustomColorCss);
This code basically says "when the color picker becomes part of a new scene, add the stylesheet to that scene".
At this point, you're applying hack on top of hack to get the effect you need. I think if I were in this situation I would just go ahead and define my own color picker. All you really need is a MenuButton, a property to hold the selected color, and a popup with a layout of controls to choose an arbitrary color. It would be a bit of work, but shouldn't be too hard. If you take this option (which I think may be your best bet), it's more work now but it will be clear what you are doing - when you (or other programmers on your team) come back to the code later you'll understand how it works much better.
You should also file a couple of feature requests. One for API to enable/disable the option to choose a custom color, as this seems like a reasonable piece of functionality to have. The other should be for properly internationalized text for the labels in the color picker, as these are currently just hard coded into the source code in English.

Is it possible to disable New Message sound for SPAM messages?

I inherited a role email account which receives an incredible amount of spam. Mail's SPAM filters do a good job or routing these messages to the SPAM box and keeping them out of my inbox, but I still receive a "New Message" sound notification every time a new SPAM message arrives. Is it possible to disable the "New Message" sound alert for SPAM messages while still receiving the alert for new messages that arrive in my inbox?
Thanks,
jason

Try this:
Go into Preferences -> General and uncheck the box that says "Play sounds for other mail actions".
I'm not sure if it will work since that's really still "new" mail, but it might be worth trying.

LMS 4.2.2 DFM still not possible to disable Duplicate IP false positives?

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

I found one discussion about Cisco Works 2.6 where it is pointed out that duplicate IP alerts cannot be disabled in LMS.
Now I have a installation with 2 core switches, one has all VLAN Interfaces up, the second one the same interfaces with SAME IP addresses in shutdown state.
DFM still recognizes these similar IP configuration on two boxes as duplicate ip situation, but it shouldn't because they are all shutdown.
Is it possible to disable these false positives in DFM?
Thanks for any hints!

Is it possible to disable "My Dashboard" but enable "My Briefing Books"?

Similar Messages

Maybe you are looking for