Is it possible to forward the same port for 2 different computers?

i have WoW and some other programs on 2 pcs that need to use the same port at the same time, and i was wondering if it is at all possible?

My guess is your only choice is probably with Port Triggering.  This requires the application to send outbound data through a predetermined port in order to trigger the inbound port(s) to open.
LINKSYS | WRT54G 1.0(R.I.P.) ; WRT54G 2.0/Thibor15c ; WRT54G 3.1 ; WPC54G 1.0 ; WMP54G 1.0 ; WM54G 1.0(mini PCI) ; SD208 1.1
INTEL | PRO/Wireless 2200BG
BUFFALO | WHR-HP-G54(125Mbps) ; WHR-G54S(125Mbps) ; WLI2-CB-G54L ; WLI-U2-KG54
SMC | Barricade SMC7004VWBR

Similar Messages

  • How to forward the same ports for multiple IPs?

    Hi all, I just bought a Linksys WRT54GS router and I would like to forward the same set of ports for two different computers on my network (192.168.1.101 and 192.168.1.3) however when I try to, I get a "Port Overlap" error. Is there another way I can do this? I am trying to set up Age of Empires II. Thanks for any help!

    No.  You cannot forward the same port to two different computers  (or IP addresses).  
    Here's the reason why:
    You and your friend are both playing the game online.  You score 1000 points.  Your friend scores 10 points.  The signal to increase your score 1000 points arrives on port 3078.  Which computer is the router supposed to send this signal to?  Both computers?   No way!
    Most online games have a way to assign different ports to different computers.  For example, you might use ports 3075 thru 3078, while your friend uses ports 3175 thru 3178.  If your game is setup this way, it should work.
    Also, you will want to forward ports to a fixed LAN IP address.  In your WRT54GS, note that any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.   So the 192.168.1.101  address is probably an illegal fixed LAN IP address.
    Here are all the Linksys rules for using fixed LAN IP addresses:
    With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
    When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
    Therefore any fixed LAN IP address would normally need to be in the range of
    192.168.1.2 thru 192.168.1.99 or
    192.168.1.150 thru 192.168.1.254
    assuming you are still using the default DHCP server range.
    Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
    It is also important that no two devices on your network be set to the same static LAN IP address.
    Typically, when I setup gamers, I put thier fixed addresses all together at 192.168.1.21 , 192.168.1.22, etc.   But you can use any legal fixed addresses that you want.

  • Forward the same port to multiple computers??

    im sure this is impossible, but there must be a workaround; i have a laptop and a big computer and both computers use skype, however, i'm not always on one computer. skype wants port 443 and 80 i think, so how do i get my router to forward these ports to two computers? it's the same with ssh, what if i have my laptop and big computer at home? how do i choose what computer i ssh into?

    a little off the topic, but can anyone advise as to how to set up my new skype download?
    I have a new imac 24" and just downloaded the latest version of skype. I also have a smc router for other computers. i get an error "valid port numbers are 1024...65535"
    how do I fix this issue? I am not savvy enough to understand the info that is provided by Skype, and need some step by step info, I think.
    can anyone help?
    Thanks, Ne
    imac 24"   Mac OS X (10.4.8)  

  • Is it possible to use the same Switch for two different clusters.

    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.

    user9198027 wrote:
    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.
    Yes.  Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
    Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
    A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

  • In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    In my family we have 3IPhones 4S, one IPhone5, one IPad3, one IPadMini and two IPad 4. Is it possible to use the same energieadapter for all of those ?

    Yes but the iPhone chargers will struggle to charge the iPads ,they need more power than the iPhone chargers produce and with an iPad will charge VERY slowly
    The iPad chargers whether 10w or 12 will happily charge all your devices and Apple confirms the compatibility on the relevant web page.

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • PPOME - Can't insert the SAME task for different organization unit

    Hi all,
    I have a doubt; in SAP 46C, it seems that is impossible to insert in PPOME, Detailed window, Tasks tab the same task for different organization unit. The only way to do this is in PP01 - General management, where you can explicitely create a [B-007] relations with the same "T" Object. Now, it is a little bit difficult for a user to switch from PPOME ad PP01 when defining new organizational structure.
    The question: is there any way to insert the <b>SAME</b> task directly in PPOME, overwriting the standard behaviour of the system that by default create a new task for each new insertion?
    Thanks all
    Paolo

    Hi Naveen
    thank you for your prompt reply.
    The issue that I want to solve is that some organization unit (not all) must be flagged for an external export to another system, depending on some characteristic of each org unit. I didn't find a similar attribute on standard field, so I thought to insert a common task to all the org units to export, so that this relation can serve as the missing attribute on org unit definition.
    PP01 let me insert a task (type T, and not TS) on an org unit directly, so I want to know if I'm going to break some standard behaviour of SAP if I insert a task on OU.
    Thank you
    Paolo

  • How to assign the same GTIN for different material?

    Hi,
    I've managed to install an internal number assignment for the GTIN / EAN in material master which works fine.
    Now we need to assign the same GTIN to different material numbers. 
    Since the defined number range is marked as internal I cannot use this number range as the external number range in spro -> Define Attributes of EANs/UPCs (number categories/EAN categories):
    I cannot make an external number range with the same data as the internal one, since number ranges must not overlap.
    So, here is the question again:
    How can I achieve that 1. the GTIN is generated and 2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    Any advice is appreciated,
    thanks,
    Marco.

    1. the GTIN is generated
    This should be "external" number range only.
    2. a GTIN, which is already assigned to another material, can be entered manually in the GTIN field?
    We can enter manually or thru' upload during master data creation provided number range is "external"(refer point no.1 above)
    Unable to understand that why you need same GTIN in two different articles?
    Request to understand the business process once again as this leads to confusion reg. inventory, PDC and PoS dumping.

  • Can you change rollover text in the same slice for different triggers?

    Hi, I haven't used Fireworks since version 3, which was about 6 years ago, when I dabbled in web development.  My past has come back to haunt me, and I need to make a fairly simple website pretty quickly for my boss.  I've got myself CS4, and now that I've figured out that you can't use buttons for disjoint rollovers, I'm starting to make progress...
    What I want to achieve, is that there are 6 'buttons' on my page, which when you rollover them will display text in a box to the side.  I would use separate boxes for each button, but there isn't enough space on the page, as there is quite a lot of text, so I would like to use a box in the same place to display any of the 6 texts, depending on which button is rolled over.  Can this be done?
    I probably haven't quite got my head round layers, and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right bit on product help?
    Because the button disjoint rollover doesn't work, I have created 6 slices for the triggers.  I tried hotspots first, but couldn't use them as I also want a rollover live filter effect on the trigger.

    Yes, you can trigger different slice contents on rollover from multiple other slices.
    It's easier to show than describe, so here is a sample file that does what I think you're looking for:
    (1) six buttons
    (2) each button has unique text
    (3) each button has a rollover state
    (4) unique text is displayed in the same place for each button on rollover
    Hope this helps!
    Dave
    Right-click and save the image below - it's a Fireworks source file:

  • Run a query multiple times in the same report for different nodes in Hier

    Hi,
    I have created a query as per my requirements. But my issue is I need to run the report for all the profit centers in a hierarchy. Right now I enter a node value of the hierarchy in the variable and I get the result. But I want to run it for each node in the hierarchy and display the result in the same report.Is it possible to do so in web using information broadcaster or any BI 7.0 tools. Has anyone done similar to this in web. I would prefer the web route rather than the excel but if excel is the only answer I will follow the excel path.
    Looking forward to your suggestions on this.
    Thanks,
    Kal

    Hello Kal,
    if the number of Profit Centers is limited, you could probably work with query views (one for each PC) and include all these into your Web Template.
    If this is not appropriate, I don´t know if there is any way of programming possible.
    Regards
    Cornelia

  • Doing the same task for different data.. Do I need Queues? How to use them if yes?

    Hello all,
    I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
    1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
    2) As you people are experts so I really like any suggestion to improve the VI..
    3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
    I will really appreciate is someone can either provide me the relevant example or can give me some idea.
    The main VI is the 'TASK START'.VI please find the attached files.
    Thanks
    Regards,
    Naqqash
    Naqqash
    Attachments:
    Project.zip ‏151 KB

    Hi Peter,
    Thank you very much for your reply. I have understood your idea but there are few problems.
    Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants)  and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
    hope guys here in the forum will help me as you guys always did.
    Naqqash
    Attachments:
    Final test.vi ‏11 KB
    Enum FTP Events.vi ‏14 KB

  • I have an ipod classic my daughter has an ipod touch, how do I put both on the same computer for different libraries

    I have an ipod classic my daughter has an ipod touch, can I put both libraries on same computer and how is this done???

    I would think you can. If you don't want them to be synced the same, create a playlist with your daughters music, and one with yours, and configure iTunes to only sych the selected playlists.

  • How can I use the same session for different components acroos application ?

    I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
    Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.

    Thanks for the response. Let me explain what I am trying to do..
    I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
    Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
    For example
    screen1.mxml -
    <mx:Panel>
    <rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
    <rtc:ConnectSessionContainer id="mySession" >
            <rtc:Roster id="myRoster" width="100%" height="100%" />
            <rtc:Chat id="mychat" width="100%" height="100%" />
    </rtc:ConnectSessionContainer>
    </mx:Panel>
    screen2.mxml (in the same application) -
    <mx:Panel>
    <rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
    <rtc:ConnectSessionContainer id="mySession" >
            <rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
    </rtc:ConnectSessionContainer>
    </mx:Panel>
    Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
    1) How can I use different components which are in different flex files as a same User ?
    2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
    3) What is the best way to do it ?
    Thanks for your time !

  • Applying different template to the same item for different organizations

    Hi I'm having an issue with an item load.
    We are trying to load a list of items using the item import.
    3 orgs
    1: mas
    2: first
    3: second
    say in the new list that we are importing there is an item "100A" (mtl_system_items_b.segment1)
    This item already exists in the mtl_system_items_b as a master item (ie assigned to the master org) it has template "STOCK ITEM"
    and is also attached to the first org
    I want to create the same item as a nonstock for the Second org
    Can this be done?
    When i tried to do the import it failed giving me a INV_IOI_MASTER_CHILD_1A error (Master - Child Conflict in one of these Attributes: Default Buyer(BUYER_ID), Accounting Rule(ACCOUNTING_RULE_ID), Invoicing Rule(INVOICING_RULE_ID), Purchased(PURCHASING_ITEM_FLAG), Shippable(SHIPPABLE_ITEM_FLAG), Customer Ordered(CUSTOMER_ORDER_FLAG), Internal Ordered(INTERNAL_ORDER_FLAG), Inventory Item(INVENTORY_ITEM_FLAG))
    Any ideas on how to do this?
    Thanks
    D

    Hi Sandeep
    Thanks a lot for the reply
    In our MASter org setup, the Template "T1" is a STOCK_ITEM template and it has the stockable attribute set at the org level.
    This item is also assigned to ORG1 as a T1 STOCK_ITEM.
    So can we create the same item using "T2 which is a NON_STOCK Template in org2 ?
    If yes then that means I just have to create a record in the MTL_SYSTEM_ITEMS_INTERFACE only for the child org2.My concern is I read somewhere that
    the item import tries to match the attributes of the child org to the master org attribute(for attributes controlled at master org i think).
    And since the attributes for a nonstock are different than those for a STOCK wouldn't that create a problem?
    Thanks
    D

  • Can 2 matrix windows be open at the same time, for different parts?

    I played a midi part freely, and then overdubbed a second part on a different audio instrument "in unison" (there is a joke here, I know), but some of the note attacks were slightly off.
    I wanted to open the matrix windows for both parts to align the notes. But I could open only one window at a time. Is there a way to open both matrix windows at the same time so you can look at the two parts side by side?
    Thanks for any advice,
    Jim

    yes - but in order for it to work u should not enable the link button - the pink one in the upper left corder of the matrix...

Maybe you are looking for