Is it possible to get an output error when there is no error?

Ok so I did a picture slide show in flash CS5 where I used actionsript 3. I added a button so that when you click it will go to the next picture. Then on the last one it will go from the last picture and reset back to the first picture. I even added some music with a stop and play button so if you are playing some music and say you get tired of it while looking through the pictures you can click the play/ stop button and it will stop.
I got the following error in my output error-
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@64b30f99 to flash.display.SimpleButton.
at flash.display::MovieClip/nextFrame()
at johnexercise3_fla::MainTimeline/fl_ClickToGoToNextFrame_5()
This error occurs when I go to test movie about half way through my photo gallery this message will pop up. The thing about it is that despite the error all my images load and play correctly as they should and my sound plays and stops as I ask it too. I guess I could ignore the error seeing as how everything works 100% fine despite the error but I was just wondering if this error is something serious or if I should be concerned? If it is something to worry about then what can I do to fix it? Again as I said the error is there but the test movie shows everything perfectly fine.

Sorry. I may have mis-spoken. I have 2 image gallery projects. One of them has a button that you click to go from one picture to another along with a stop and play button for the music. Now my second project which is in seperate flash document is the same exact project except that instead of using a button to click from one picture to another I am clicking on the picture itself to get from one image to the next. My 2nd project is the one that had the error. And I also kept the stop and play music button on that one. I am not sure about anything else that would have caused this code error but it went away for now. For some reason it was giving me this error and I closed out of flash and restarted as it kept acting funny at school today and for some reason the error went away. I will keep what you and kglad said in case the error comes back just do that. Thanks again to the both of you.

Similar Messages

I got my new imac 8.1 in mid 2009 is it normal to get an older model when there is a newer model ?

i got my new imac 8.1 in mid 2009 is it normal to get an older model when there is a newer model ? i just figured it out this week

It's also possible that the heat damage, if that's what it really is, was caused by overheating while you were using it.
Get iStat Pro widget to monitor the temps and possibly prevent overheating of the new drive. You want to keep the drive temp as close as possible to 45C. 45-50 probably still OK, but constantly or very often above that will shorten the drive life.
http://www.codinghorror.com/blog/2006/12/hard-drive-temperatures-be-afraid.html
If there was noticeable heat damage to the drive, and it might not have been that, the temps would have had to have been extraordinarily high. Don't know about your model, but the thermal shutdown temp for some older Macs was 85C.
https://www.macupdate.com/app/mac/20364/istat-pro

Issue using extractval to get the node value when there is namespace

I created the db with a XMLType column:
CREATE TABLE mytable1 (key_column VARCHAR2(10) PRIMARY KEY, xml_column1 XMLType);
Then inserted one row:
INSERT INTO mytable1 (key_column,xml_column1) VALUES ('test', XMLType('<MY_TEST xmlns="http://xmlns.oracle.com/ku" version="1.0">
<SCHEMA>SYSTEM</SCHEMA>
<NAME>TABLE41</NAME>
<TEST_GROUP>TEST_GRP_RMP</TEST_GROUP>
<TEST_NAME>DEPARTTEST</TEST_NAME>
<FUNCTION_SCHEMA>SYSTEM</FUNCTION_SCHEMA>
<TEST_FUNCTION>EXCLUDE_TABLE</TEST_FUNCTION>
<STATEMENT_TYPE_LIST>
<STATEMENT_TYPE_LIST_ENTRY>
<NAME>SELECT</NAME>
</STATEMENT_TYPE_LIST_ENTRY>
</STATEMENT_TYPE_LIST>
<UPDATE_CHECK>Y</UPDATE_CHECK>
<ENABLE>Y</ENABLE>
<STATIC_POLICY>N</STATIC_POLICY>
<TEST_TYPE>DBMS_RLS.DYNAMIC</TEST_TYPE>
<LONG_PREDICATE>N</LONG_PREDICATE>
</MY_TEST>'));
Then I ran:
select extractValue(xml_column1,'MY_TEST/TEST_NAME') policy from mytable1;
There is nothing returned.
If i do not have "xmlns="http://xmlns.oracle.com/ku" " in MY_TEST node, then the correct value returned.
Please advise how could I get the node value when there is namespace? Thanks.

This is a known issue. In the third parameter of extractvalue, set the namesapce. Then it works.

Is it possible to get the output of a text container into Spool..?

Hi
I am trying to write a report for a standard transaction(SM65) in BDC and run thru background job so as to get the output in to Spool. Right now I am facing an issue to get the SM65(text container) tcode output into spool.
FYI..I am using "CALL TRANSACTION 'SM65' USING BDCDATA MODE 'E'."
Please provide tour valuable inputs.
Thanks!
Shiv

Hi Shiv,
Instead of writing BDC for T-code SM65 I would suggest you to use following function module to get the required data.
      CALL FUNCTION 'BPT_ANALYSE_START'
        EXPORTING
          server_name            = servername_tmp
          check_all_btc_servers = sbpt1020-allsrvchk
          profile_check          = sbpt1020-profilechk
          xpgm_environment_check = sbpt1020-xpgmcheck
        TABLES
          protocol_tbl           = global_protocol_tbl
        EXCEPTIONS
          OTHERS                 = 99.
Once you got the data into "global_protocol_tbl " you can create spool of it.

Am getting PCM output error message when trying to play a video from iPad2 on my TV

The movie was purchased on iTunes store. I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound. After a few minutes and every few minutes after that the movie would blur and blackout then it would come back. Eventually I got a PCM OUTPUT error message onscreen. How do I resolve this problem?

I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

Hi all,
My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

The startup drive is failing, or there is some other internal hardware fault.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

I keep getting input/output error put when trying to make a complet copy of my hard drive, which also has vista using fusion.i have did the permissions and repaired, disk verify.

error input/output

Yes. Formatted correctly. It' s new ext HD and I made a the first back up on it a few days ago using time machine while my computer was in safe mode. When I was able to restart my computer normally I quickly set up a time machine backup to my larger 5 TB ext drive. Also new and formatted for my mac. I was in a rush to get it going before I left for work so maybe I did something wrong. IDK. I can't remember but it did ask me about switching drives vs setting up. Although I don't see why the computer wouldn't see the drive.
I did try another firewire cable and no change. Checked connections again. The HD turns on and the blue light comes on (it's a La Cie d2 quadra deskdrive)
Is the SMC reset where you detach devices and restart? My printer, keyboard and mouse are all wireless and right now I don't have anything else connected.
I'll try another PRAM reset too.
* Question:
When I connect the 3 TB drive it starts up but I don't see it on my desktop, finder sidebar or in disk utility. If a hard drive starts up but doesn't show up on your computer how do you safely shut it down before disconnecting? I've been clicking on the desktop and then pressing the eject button on my keyboard just in case.

Possible to get xml output?

I want a button that can save the form data into a xml file is this possible and if it is can someone point me in the right direction.

Can some one please help me here

Trying to hard drive backup,keep getting input/output error

inout/ouput error

something is wrong with the drive, drive another, format it correctly
https://discussions.apple.com/message/16276201#16276201

Is it possible to get a black background when using Picture Book layout in iphoto?

I want to customize the layouts more in iphoto--either be able to use a black background when using the Picture Book layout, or have more layout options in the Photo Essay layout. Are either of these possible?
Thanks!

Yes.

Is it possible to get data from N80 when screen br...

Hi guys I have pictures and data on my on my old Nokia N80 that i cant get to, there on the phone not the card
The big problem I have is the screen is broken and so are all the nav buttons on the front of the phone, so all I have is the keypad working
when I switch the phone on the keypad lights up and then I can put my passcode in by putting my code in and then holding the # key and I then hear the nokia start up tune
I then plug the phone in to the laptop and start the nokia pc software, the laptop seems to know that the phone is there but the nokia software will not connect to the phone
Is there anything I can do to get my data off this phone or have I lost it
thanks for any help
Mark

the buttons part was in reply to fw1980.
as for you trav0209, it's going to be blind navigation till you get to connect in pc mode. and it depends on certain settings you had on your phone.
- first of all the "USB connection mode" was it set to pc mode and ask each time" or did you change that.
- the second thing, was your menu in default organization or did you move folders around.
you need to remember these in order to navigate the phone blindly " remember that nokia stopped using numerical shortcuts to menus" .
my advice if your phone was in default settings is that you use another 3rd edition symbian phone to simulate button presses on, and repeat the same sequence on your N80.
-try connecting the usb port and as soon as the pc recognizes it press the navigation button "the middle silver button on the fron panel" and see in which mode it's connected.
Fear not those who argue but those who dodge

How to get ServletContext from HttpServletRequest when there is no session?

Does anyone know of a way to be able to pull the ServletContext from an HttpServletRequest if there is not a session available?

You could always just do:
request.getSession(true).getServletContext()The true argument to getSession() creates a session if there isn't one. Alternatively, you can store the ServletConfig object you receive in the Servlet's init() method, and get the ServletContext through that.
Brian

How do I get the RAM upgraded when there is no Authorized Dealer in my country?

I bought a late 2012 iMac at a Big Box store in Panama (Not Florida). No one spoke English and my Español is limited. I knew there was no optical drive in the maching and was prepared for that. But no where that I read while investigating this machine did it say : RAM not user installable.
You have to go to an Apple Authorized dealer to have your upgrade installed! That means a $65 an hour or more service charge, if you have access to a dealer. Probably more since that have to disassemble the entire machine to do what was a 5 minute task for a user. I'm betting you have to buy the RAM from the dealer as well. That would be three times street price.
Since I bought this iMac in Panama, the keyboard is Spanish. After some time with Apple Support, they still haven't given me an answer. Not that they didn't try. I found out on my own how to change the language and text. The keyboard now speaks English. However all of the keys, other than alphabet are still for a Spanish keyboard. How can I get new keycaps? (This questionmark was typed with the Underscore/dash key). I hate having to type several keys before I get to the right one.
As to the RAM, I guess I took a beating on the overall price. $1539 without tax for an $1149 machine with 8GB RAM and no way to install it. No optical drive, another $69.
APPLE! There is no Authorized Apple Dealer in the entire country of Panama! I tried purchasing from Amazon.com, but no one can ship outside of The U.S.A. However, the iMac I bought is identical to the one I tried to order. It was sold to me in Panama. What a bunch of crap. If they would have allowed my original order to be shipped, I would have no problems, be able to type at a speed prohibited by the wrong keycaps, Have the RAM pre installed, and be over $500 richer.
I've been using Apples since the Apple][......some thirty years with over a dozen or more models! This is the first time I feel CHEATED!
Lonnie Cross

I would just contact Apple directly at 1-800- MYAPPLE and get all of this sorted out.
You have a brand new iMac with one year of free, complimentary AppleCare plus free 90 days of telephone support.
Call them, explain you situation very calmly to them and see if they can work something out for you.
We are all just users here. We can't really help you with this issue. Apple , from time to,time, does peruse these forums, but not regularly. You got lucky last time. They may not see your posting this time.
Only calling them direct will you get any help and assistance.
Good Luck!

How can I get rid of posts when there is no little x to click on?

I was in Farmville Freaks and clicked on share and now it's on my home page and can't get it off because there's now little x beside of it to click on.

See this: <br />
http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

Is it possible to get an output error when there is no error?

Similar Messages

Maybe you are looking for