Is it possible to import one spark component without importing the entire spark library?

I want to create an actionscript mobile application project because the total size will be smaller than a flex mobile application - the SDK is smaller because it doesnt contain unnecessary libraries e.g. the spark, mobilecomponents, framework etc. are not included. There are however 1 or 2 spark and mobile comonents that i would like to use and it seems a little silly to import the entire swc libraries for a couple components. So herewith my question... Is it possible to import a spark or mobile component without actually importing the entire swc library?

Hi Gordon,
Im using option 2: Merged into code. I have just recreated this on a colleague's laptop as well with the same result.
Could you perhaps see if you can follow these steps and see what happens on your side.
Create a new Flex Mobile Project > SDK 4.6.0 > Google Android Platform > Blank Application Template > Finish
Add <s:TextInput/> under declarations tag
Export Release Build > Intermediate AIRI package that must be manually signed later > Finish
Decompile the SWF from the .airi package (I'm using Sothink SWF Decompiler)
Expand Action > Spark > Components
My components folder contains many spark components im not interested in packaging - see screenshot attached above for the full list. All we added was a spark textInput and the swf contains Buttons, Scrollbars, TabbedViewNavigator etc. Thus the reason for this post.

Similar Messages

How do I transfer a few songs from old library without bringing the entire old library to the new one?

I am trying to condense my itunes library from a desktop to a laptop. I only want a few songs from my original library so I can have more room on my ipod, I turned on home sharing so I could import the songs i wanted. then once I imported the select songs and synced my ipod, the entirety of my old library stayed and everything else went on.
itunes is saying that I have about 14.20 GB but my ipod says I only have 1.1 GB left....
please help! thanks!

Here are the screenshots.
Importing is bringing (in this case) a song from a library and bringing it into another library.

I would like to transfer a playlist and associated music from one computer on a home sharing network to another without transferring the entire library. How?

I would like to transfer a playlist and associated music from one computer to another in a home sharing network without transfering the entire itunes library. How would I do that?

you can transfer playlists using home sharing but it won't copy the actual music files within to the other machine.
however, i believe TuneRanger can do that.

More than one business component (views) in the same JSP page

Hi, I am trying to have more than one business component (views) in the same JSP page as Input Form.
For example:
There are two BC4J:
Person:
Code.
Name.
Address:
     Person_code
     Street.
     City.
There is a master detail relationship between them and there is a link between both views in the application module.
I want to create a JSP page with an Input form for both views. When the user decides to create a Person, I need to insert in both tables.
Insert code and name into Person table.
Insert Person_code, Street and City into Address table.
It is possible to do in Forms but I am not sure if I can be able to do this in JDeveloper 10G.
Thanks

Sorry I lost the tabs
Person has two attributes Code and Name.
Address has three attributes Person_coden Street, City.

Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
Regards
Léonie

HT201210 Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS.

Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS. my itunes version is updated and my mc version is also updated
my question is: how can i make itues store to work? how can i go back to the previous version of ios?

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

Is it possible to transfer a completed iPhoto book from one Mac to another, keeping the entire book structure intact?

I recently went on vacation and decided to use some of the free time to create some books of family photos. I transfered the entire iPhoto library of pictures from my my iMac to a MacBook which had never before been used for photos. The library transferred perfectly with all photos, albums, calendars, books, etc. intact. (Thank you, AirDrop!)
I successfully created and ordered 3 different books of photos on the MacBook. Now I want to transfer just those 3 completed books back to the iMac for archiving. Can I use the "Export" command to do this? If so, should I use JPEG, TIFF, etc?
I realize I could simply transfer the entire library file back from the MacBook back to the iMac, but I'd prefer not to take up all that disc space by having two photo libraries on my hard drive (and I'm chicken to delete the original iMac library).
Thanks in advance for your help.
Bob Baker

Yes you can move the book but not by exporting
The book is just entries in the iPhoto database so the only way to transfer it is ot transfer the entire library it is in - you can make a "mini" library containing only one book to make the transfer easier - see Old Toad's tutorial #9 - http://oldtoadstutorials.net/No._9.html
You also can save a PDF of the book and transfer that but you can not edit pr process it
LN

How can I get the component LTC1060 in the multisim 10 library ?

How can I get the component LTC1060 in the multisim 10 library ?

ahnsei ,
This is a switched capacitor filter - with a variety of configurations for each mode of operation based on the switching frequency. To create a transistor level SPICE model would be unrealistic (which is probably why you haven't found one), so I would suggest looking at the datasheet and specifically, looking at each mode of operation and seeing if you can approximate the filter topology with an expression for the transfer function given in the datasheet (by calcuting based on the switching frequency).
Based on the expression you get, you can use the Multisim component "TRANSFER_FUNCTION_BLOCK" to plug in the correct transfer function and thus approximate the behavior of the filter in the circuit.
This transfer function can be found in the Master database -> Sources -> CONTROL_FUNCTION_BLOCKS. There was a previous discussion giving some additional details on how to setup the transfer function block:
http://forums.ni.com/ni/board/message?board.id=370&thread.id=3987
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (207) 892-9508

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event and the number of pictures.

Hello,
I am using version iPhoto'11. Since I installed this version I experience some difficulties. After importation of pictures I can see the pictures under Library/Pictures but not under Library/Events. However I can see the event with the event title, the number of pictures and the pictures itselve as small thumbnails. BUt ounce I want to open the event to see the pictures in full screen the event title annouces 0 pictures and no pictures are visble anymore to mee. I have checked if the pictures are marked as hidden and this is not the case. What's going wrong. All the other events are visible in a normal way.
The albums with the same pictures into them are visible.
Thanks for your help,
Raf

Make a temporary, duplicate copy of the library and try the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select options #1, #2 and #6.
Click to view image full size
OT

I have 2 i-touches can not just add one play list with out the entire icloud down loading.

I have 2 i-touches can not just add one play list with out the entire icloud down loading.
Also my daughter is getting my wifes im's and vice a versa

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

(LR5) Possible to synchronize a modification-amount, without unifying the settings ?

(LR5) Possible to synchronize a modification-amount, without unifying the settings ?
Assume I have ten completely different photos i each optimized individually.
Thus, sliders (not speaking about curves) of, say, color-tint or temperature; could/would be each on a different setting.
Is it possible to intervene on such a slider collectively without changing their individual starting-point?
"Every selected-photo's tint-slider go up by 7 values, without synchronizing the final setting itself ?
( first photo slider position of -7 becomes 0, second photo was 2 and becomes 9, etc) ?
Auto-sync does not do that.
Sync does not.
Is there a plug-in for enabling this?
ignoring the solution ?
Impossible ?
Thank You for any reply soon ! :-)

Yes:
* Without a plugin: limited adjustments are available via Quick Develop section.
* With plugin: comprehensive support is available via plugins like Gazoo (free), which I wrote.
Rob

Install one EHP4 Component without SAP Ehpi

Hello Experts!
We have an existing EHP4 System with SR1/SP03.
Our Problem:
For Example the Component ECC-SE is 600-0015 instead of 604-0003.
All other Components are on 6004-0003.
Is it possible to "Patch/Upgrade" the ECC-SE Component without the SAP Ehpi Installer from 600 to 604?
The procedure with the Ehpi Installer are very involved, to "patch" only one Component!?
Best regards!
Benjamin

Hello,
What you want will not be possible without EHPinst.
First of all you should make sure that your Maintenance Optimizer is up to date as well as your defined solutions.
Afterwards you can select the new components (based on business functions that you would like to have) in the MOPZ again.
MOPZ will then determine the missing software components and according support packages and will generate a new XML file.
Afterwards you have to use EHPinst again to install the missing software components.
A new tablespace PSAPSR3701X will be created (again with shadow instance, repository switch, ...).
Advantage the software components that you would like to add are rather small, so elapse time will be very fast.
We have already used this way of working to bring missing software components to EHP4 level.
Online part was 1 day, off line part was 2 hours (for EA-HR and SAP_HR components, SAP_APPL was already on EHP4).
Wim

How to do with rfc module which one is changed without effect the applicat

Hi Masters,
i have developed one webdynpro java application with calling some rfc from r3 side. Now i add extra functionality in rfc . now i have to import that rfc without effecting the already developed application. How can i do. i came to know that some option is there to do this. please give reply.

Hello,
If there is change in business logic without adding any additional parameter in RFC, you can directly use the RFC without importing it. There will not be any adverse impact on existing application.
However, if there is any addtional parameter or structure change, then you have to re-import he model. It is recommended to restart the J2EE engine after model re-import to clear the metadata cache.
You may need to do context binding based on your business logic and hence some amount of change is required in existing application.
Let me know if it clears your doubt
Abhinav

Why do all my photos (but one!) not take up the entire touch screen?

I've been trying to figure this out for some time with no luck.
I have a very nice DSLR camera but I tend to use all the preset buttons. My photos always show up as a "square" shape when using things like the Apple TV photo display and on the ipod touch.
Recently we spent 3 weeks at the beach and I changed no settings on the camera during that trip. One photo out of almost 400 taken is more "rectangular" such that when I flip my ipod touch, this photo will change and take up the entire screen with no black edges. All of the other photos have blank edges/square shape.
My old cheap Kodak digital camera takes up the entire screen with all photos on the touch and the ATV. A friend shot some photos and his takes up the entire screen as well. Mine are always square, except for this odd one.
When I "get info" in iphoto, a sample of about 10 photos from this bunch from the beach show size 2032 x 1354, if that matters.
Any info?
Thanks.
More info: Looking through the photos, I noticed there was a change in the settings during the trip as there is a point where all the photos take up the entire screen. I don't know how to check the settings that were in place but the difference is:
Square shape: size: 3200 x 2400, and about 1.1 MB per photo.
Rectangular shape: size 2032 x 1354 at about 446 KB per photo.
I'm a novice at the particulars behind the photos but I'd like a good quality picture that isn't square but rather takes up the entire screen.
Message was edited by: Clayton Rhoades

David,
Thanks for the note. I looked up online and you are correct...the aspect ratio for my camera is indeed 4:3. I see in my camera settings where I can change the size of the photos but I've played around with that stuff and seen no difference in the aspect ratio.
I guess I'm stuck with what I've got?
I tried converting some of them with iphoto to a different aspect ratio and I don't think that's possible either.
Thx.

Is it possible to import one spark component without importing the entire spark library?

Similar Messages

Maybe you are looking for