Is it possible to load pictures directly from your computer to your ipad. When I loaded the camera pictures onto the computer, re ordered them and fixed some, I then tried to move them to the ipad. It does not allow me to paste the copied file.
Is it possible to load pictures from a computer to your ipad. When modified my camera pictures and reordered them, I was unable to load them to the ipad. I could copy but not paste. If I reinstalled them on the memory card, the ipad did not recognize them.
The iPad can be pretty picky.
One way, if you sync your iPad to your computer, is to use iTunes to 'sync' the photos onto the iPad. Of course that has the downside of if you sync them on you have to use iTunes to sync them off.
Or you can download the iCloud control panel and use photostream to put the photos onto your iPad. WHen you install the iCloud panel and enable photo stream it'll put a folder on your computer. Import photos into that folder and they'll go onto your iPad (they do transfer via wifi so it's not exactly an instant thing, might take a few minutes depending on your network and file size.
Or, if you have a few, you can e-mail them to yourself, open that mail on your ipad and save them from there.
Or, to use the camera kit, you can import htem onto your iPad, but the camera connection kit requires a very specific naming protocol. There must be a folder named DCIM on your memory card, and then all files on that card must be in that folder and have a name of 8 characters. If you follow the naming convention, once you plug the memory card in the iPad will see it and allow you to import the photos.
there are also third party photo apps I just dont' have any to recommend.
One more thing to bear in mind, even if you rename the files, the ipad persists in organizing the photos by date, so I'd experiment and make sure it doesn't totally rearrange your files before you spend a lot of time on it. (third party apps may respect the name of the photo and organize it that way rather than by date first, then name)
Similar Messages
-
My import window does not allow me to pick the "move" option. How do I access it?
My import window does not allow me to pick the "move" option. How do I access it?
Because Adobe has taken the stance, within Lightroom, that it will not touch files on card. Your card serves as a fail-safe backup in the event of disaster.
Ejecting a card has no effect on your images and is allowed so that you can removed the card without intervention of the OS.
After you've ensured image fidelity and backup, accepted best practice is to reformat your card in-camera. Trust me, I don't want to be on this forum answering questions about why someone lost their files because they "moved" them. This has been debated many times on the forum. -
I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.
artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
my Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?
hey i m working on my illustrator and i m having many problems with my swatches
for example i use the green phosphorique i don't get this color i get another green
and many colors too it's like illustrator chooses for you the only green color
so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
my e mail is [email protected] i would be thankful
i even tried to download the illustrator on my friend's computer also i m having this problem .... -
"save as" pop up box does not allow me to save the document.
Hello ,
"save as" pop up box does not allow me to save the document. Shows a blank screen. Any idea what would cause this? I just purchased acrobat pro dc.
Thanks!Found this solution:
The default "Save As" dialog in Acrobat DC is different than the dialog that you've had in earlier releases of Acrobat, it also allows you to save to the cloud and previous locations you've saved files to. It is possible that when Acrobat tries to connect to "the cloud", it runs into problems. You may want to try to turn this feature off to see if that brings your save as dialog back: Open up Acrobat's preferences, then go to the "General" category and deselect "Show online storage when saving files": -
I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?
You can try removing it in Disk Utility.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed.
You should now have a restored single volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work. -
I am using Quickbooks Pro with my macbook pro. It does not allow me to use the @ symbol when I am inputting an email address into the client information section. What do I do?
stefani88 wrote: It seems from other discussions my current OS on my laptop is the reason why it won't sync but people running older versions of windows aren't having a problem. So I don't get it.
Oh. Gosh. What's Windows got to do with anything? You're on Leopard, on a Mac.
It seems from other discussions my current OS on my laptop is the reason why it won't sync -
Itunes does not allow me to change the store due to rent objects not yet expired. here are non left
Itunes does not allow me to change the store due to rent objects not yet expired. there are non left.
ChrisHi Evii0105,
The article linked below details a number of troubleshooting steps that can help restore your computer's ability to connect to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/en-us/HT201400
Cheers,
Allen -
My iphone does not allow me to select the Wi-Fi setting. It is all grey and says no Wi-Fi. How can I fix this problem?
Thank you for that. I've been on the web trying to work it out and resetting my phone etc and no luck. Thank you so much for your help. Guess I'll be making plans for a trip into Apple.
-
I am trying to access a numbers document in mycloud and it keeps saying I need a newer version. I purchased the upgraded app for my ipad and now I can't seem to upgrade my computer so that I can get access. I went to the app store but it won't let me download the newer version onto my computer? What is the point of putting things in the cloud if I can't access them?
JanNumbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
Well, I had installed in my new computer a trial version from Acrobat XI Pro, but I had issues with Microsoft Word 2010, since it did not allow me to save changes on my file. I uninstalled it from my computer before the trial period was over, and then, after I solved the issue with Office, I wanted to get it back for a time, but the installer does not allow me to choose Trial Version. I can reach that screen where you choose between key and trial, but once I press trial and click on next, it does absolutely nothing at all.
I have tried to manually delete folders, and I even used CC Clean to make a registry set up, but nothing out of that is working for me at all, and it keeps happening. I have no really idea what to do, and I kinda need to use Acrobat immediately for a file.The trial can only be loaded 1 time as far as I know. You could try http://labs.adobe.com/downloads/acrobatcleaner.html, remove any left over parts of the Acrobat folder, and reboot. Then try an install again, but my guess is you will have to purchase Acrobat at this point.
-
Dreamweaver does not allow me to edit the editable region
Oh my, I'm so desperate in this, I have a .dwt and have set up the editable region as well. When I want to make a new html file from the said template dreamweaver does not allow me to edit it. I mean, all the code is completely grayed out as if the template itself is locked by default.
What I want to do is to create several new pages such as new albums, charts, genres, contacts (which all based on the home template) The home template itself has slider in its body. For the new html files I'm about to create (which I'm so desperate why I can't do so) I want the header and footer to remain the same.
Here is an image of my index.dwt (my homepage) anything inside the red frame is what I want to edit for new albums, charts, genres, contacts, login page, etc. The top part is the header and the bottom one is the footer (Excuse the right image, I'm working on dual screen)
Any help will be appreciated!
Sorry for my englishHello SeptianNugraha,
here some hints concerning while handling templates (I quote):
The main principle of DW Templates is:
Non-editable regions = propagate to all child pages. The content of non-edtable regions is identical on all child pages. When you edit a non-editable region, DW propagates all changes to all child pages.
Editable regions = do not propagate because they're unique to every child page. The whole idea of editable regions is that they contain page specific content which does not appear on any other child page.
And:
PART 1
1. Create a prototype page with all the sitewide elements (common header, footer, sidebar, etc..) that you will need for your entire project. This requires some careful pre-planning even for small web sites.
2. Validate your code & test this prototype page in all major browsers. 3. When you're completely satisfied with your layout, SaveAs Template. DW will save this as a .dwt file in a site folder called Templates.
4. DW will ask you to add Editable Regions for stuff that will change from page to page. Do this and SAVE.
5. Close your Template.dwt file.
PART 2
1. File > New Page > from Template. Select the template you wish to use. Hit OK.
2. This is a child page. You can only edit content within editable regions. Everything else is locked.
3. SaveAs index.html (your home page) to the root in your local site folder.
PART 3
Repeat PART 2 for each additional page required.
PART 4
1. Open your main TEMPLATE file and add a navigation menu with links to your site pages.2. SAVE.3. DW will ask if you want to populate changes to child pages. Hit yes.
4. Publish all site pages to your server.
PART 5
If you should ever need to edit your TEMPLATE .dwt file, Repeat PART 4.
Good luck!
Hans-Günter -
When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?
In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'.
Then on the view menu which now appears choose 'show sidebar' -
Firefox RC does not allow me to use the zoom in and zoom out function on Apple Touchpad
A couple of weeks ago, I tried out Firefox 4 Beta version, but soon I realized that Firefox 4 Beta does not support certain functions of the multi-touch pad, of the Apple Macbook I bought in 2010. The two finger scroll works. The three finger swipe to go forward or back in the web browser also works. But what does not work, is the two finger zoom in and zoom out function.
In the address bar type without quotation "about:config" then hit enter. Be careful about what you type. I would suggest copy/paste.
Scroll down to
"browser.gesture.pinch.in"
right click and in the small window under value type without quotation "cmd_fullZoomReduce"
Scroll down to
browser.gesture.pinch.in.shift
right click and in the small window under value type without quotation "cmd_fullZoomReset"
Scroll down to
browser.gesture.pinch.out
right click and in the small window under value type without quotation "cmd_fullZoomEnlarge"
Scroll down to
browser.gesture.pinch.out.shift
right click and in the small window under value type without quotation "cmd_fullZoomReset" -
I want to move pic's in a folder from iPhoto to a flash drive. Everything I've tried allows me to "copy" the folder but no "paste" to the flash drive. What do I do? What am I doing wrong??
Welcome to Apple Support Communities
Your USB drive is formatted in NTFS, and OS X can't write on disks with NTFS. To fix this:
1. Use an app like Paragon NTFS.
2. Format the USB drive in another filesystem like "Mac OS Extended (Journaled)", "MS-DOS (FAT)" or "exFAT" > http://pondini.org/OSX/DU1.html Make a backup of your files on the external disk.
After doing that, you will be able to copy your photos to the external disk. Note that you can also use the Export feature in iPhoto to get more export options
Maybe you are looking for
-
EDI Message for Scheduling Agreement Schedule Lines
Hi Experts, My client has the EDI set up for the SASL and is running fine. Currently we have scheduled background program to trigger the IDOC and convert the IDOC into XML to send the information to the external system via interface after MRP run.Out
-
I am trying to use the Forms and Report Services only install on a RedHat AS3 server. I have been through all of the pre-configuration for Application server and feel that all the requirements have been met. When I run the "runInstaller" program I re
-
1 PO with several invoices based on %
One of our customers has the requriement where they create a purchase order (say for the following below) Purchase Order Product QTY Unit price line total Item A 1 $10 each $10 Item B
-
PythonWin and SAPGUI Scripting
I was hoping that somebody else might have posted some examples of SAPGUI scripting and Python(Win) - but I couldn't find any. Here is a very small example of SAPGUI Scripting with PythonWin. It might serve as a quick start for others who might also
-
Hi All, I'm having an interesting issue -- I'm very new to AIR, btw. I build a spry table (using CS3) that pulls a local XML data source, and it displays fine in HTML However, when I try to show it as an AIR file, I get this message:spry:region or sp