Is it possible to load the new Apple OS on a Lenovo X1 Carbon?
I've been working with Lenovo's for a while and looking on doing a massive trip in Latin America and need a really durable system but don't want to get a mac notebook when I know how tough Lenovo's are.
So I have a hook up at Lenovo and thinking about the Lenovo x1 Carbon, but I've invested so much in the Mac OS on my home iMac.
I was wondering if I could get the best of both worlds? Can you guys give advice on this?
Thank you techies!!!
Glad I could help.
But not all of us are gentiles.
Similar Messages
-
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
-
is it possible to have the new podcast down load to the bottom of the list so i can hear them in order. instead of flipping back and fort?
Yes. What I did was create a smart playlist for "Genre=Podcast" and "Plays=0" (don't use Media Type, then it won't syc). Order the playlist by the date of the podcast, and make sure your podcasts are set to skip when shuffle. Works like a charm.
-
How I down load the new Ical Calendar on Apple?
i went to the store for other reason and they told me I can load the new Ical free . Where I found it to dowload it. I Could not find the way on web.
Hello Paul22365
Check out the article below for troubleshooting the app on your iPhone.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.
What is your technical support question for these user to user technical support forums?
-
My Apple id was disabled and had to make a new one for iTunes but it's not letting me erase then re download the app with the new Apple ID Just got an iPad air 2 so my iCloud and family sharing is with the one that's disabled. Which I don't know how to switch to my new one, so I trying to erase my apps that won't load and just re download them with my new ID that is being used with the iTunes n app store but I can't even find most in purchased plus it's saying that I can't get it cuz that ID is not with family sharing but I donT know why it would not be. Please someone help.
OOk so I have my new Apple id in my iTunes account but my old Apple ID is the one that is in the iCloud account which is the Apple ID have been using for years and the reason I cannot get it on this abled is because somebody was using my credit card or debit card that was on file for family sharing and it was a stolen iPhone from my account so they had to disable my Apple ID and I could not use my debit card anymore on any Apple ID ever again they said because of it so I can't get it not to be disabled and I can't sign into iTunes with it I already have signed out and signed in with my new Apple ID for iTunes it's just iCloud is not letting me load anything so pretty much what I've been doing is I have to erase every app and then re-dumb going to iTunes and re-download the apps again but the only issue is that I still have a disabled Apple ID as my iCloud settings and my iCloud family sharing in all of that so I'm wondering how or is it possible to change my Apple ID for iCloud specifically because when I go into Icloud and settings and go into my name where my Apple ID is the one that's disabled it doesn't say anything about log out or sign out or anything like that it just says to put the password for it so is there a way to change the Apple ID for my iCloud so that my iTunes in my iCloud is the same Apple ID?
-
hi there, i have a ipod classic purchased in 2007,with the release of the new Apple TV dock in Australia,my question to anyone out there including apple suooort staff,CAN I USE THIS NEW DEVICE TO VIEW MY VIDEO CLIPS I DOWN LOADED FROM ITUNES ON MY TV INSTEAD OF BUYING THE APPLE COMPONANT CABLES....THANKS EDWARD
You can plug the iPod into the same iTunes library as your iPod Touch and sync whatever content you like to it. There is no limilt to the number of iPads, iPhones, or iPods you can sync with one iTunes library, account, or computer. How you sync one device will not affect the syncing preferences of the other.
B-rock -
My daughter down loaded the new 6.0 software and now her home button does not work. Tried reseting to original settings and reset the operating software. Any ideas?
Try:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?
Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com -
I am trying to load the new itunes and I keep getting a runtime error R6034
I am trying to load the new itunes and I keep getting a runtime error R6034
The new Itunes software update is flawed! I had the same issue. You need to uninstall Apple components, then reinstall. Go to this link for instructions. Takes about 20 mins but works!
http://support.apple.com/kb/HT1923 -
I down loaded the new iwork update. Now when I create a docume
I hate the new 5.0, and am having the same issue. Because I created or opened and saved several documents in the new 5.0 before I realized how bad it is, I had to figure out how to make them usable again.
I have both versions of Pages (5.0 and 4.3) in my Dock for now. If a document tells me that it can't be opned by 4.3, I opn 5.0, open the document, EXPORT it in 4.3 with the same name, and overwrite the old document. That usually (big dog willing and the creek don't rise!) gives me access to my work.
Once I am sure I have no remaining 5.0 douments around, I'll take 5.0 out of the dock.
It truly is a pain in the ***. Here's the comment I left for Apple –
I am now attempting to uninstall Pages 5.0 so I can go back to using Pages 4.3. The designers of 5.0 took away (or hid) so many of the functions that I've come to know and trust that I am appalled.
It is now a kindergarten version of the workhorse I knew and loved. IT EVEN LOOKS like a dumbed-down app now, with cartoon buttons that reflect its audience – people who don't need a sophisticated, customizable publishing tool, who just need simple icons they can point at LIKE A FAST FOOD CASH REGISTER.
I'll be using either 4.3 or Word for Mac from here on out. -
Does anyone know if loading the new OS will take care of a malware problem?
Does anyone know if loading the new OS will take care of a malware problem with Safari?
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I loaded the new iTunes (11.0.0.163) on my computer and also just purchased a new iPhone 5. Prior to loading the NEW iTunes, I was able to sync with my new iPhone 5. After I loaded the new iTunes, I now get an error message: 0xE8000084. What's up?
Also, it says the iPhone 5 is not registered to my Apple ID.See if the troubleshooting for 0xE error codes on this page helps : http://support.apple.com/kb/TS3221
-
I recently purchased an old iMac G3 Macintosh. I was wondering, is there a way where I can update it without using an external disc? I've seen the newer Apple products with the dock, if I update my iMac G3, will it have that, and if so, how can I do that?
I was wondering, is there a way where I can update it without using an external disc?
If you mean the iMac does not have an internal optical drive capable of reading DVDs, the only option requires another Mac with a DVD-capable drive and FireWire ports. Your iMac G3 will also require FireWire ports. Not all G3 iMacs have Firewire. FW started with the Summer 2000 models with 400mHz and faster processors.
With FireWire, you can use FireWire Target Disk mode to install from a retail OS install DVD in another Mac. If you supplemental info info tells us if you have another Mac with a DVD reader and the FW ports, we can walk you through the process.
If the iMac has a tray-loading drive, I'd forget it. They are very limited not only in the OS max (10.3.9) but also in RAM capability. Starting with the slot-loading iMac G3s, the max RAM increased to 1 GB (2 X 512MB modlules). Tiger likes 1GB RAM.
Understand that pre-Intel Macs are getting harder to use. Even with 10.4.11, your choice of browsers is limited (TenFourFox is the most viable option) and the G3s rudimentary video hardware means web browsing will be choppy at best.
If you are in the USA, you can try calling the Apple Store (1-800-MY-APPLE) for an OS disk. As recently as Jan 20, someone posted here that they were able to buy Tiger by calling. It was not clear whether the disks were replacement system install/restore disks or full retail install, but it's a free call.
When you do "About this Mac" to check teh OS verion, also look at the processor speed and tell us what that says. That can help with recommendations for an upgrade path. -
I have a windows computer running xp. I can not load the latest version of I tunes. I receive an error message that the 'msi" file can not be found. I can not delete I tunes for the same reason.
HELPItIt is the the ituens msi file
From: Apple Support Communities Updates
[email protected]
Sent: Monday, February 27, 2012 3:40 PM
To: escow 39
Subject: - Re: I want to install the latest version of
i tunes. I recieve an error that the MSI file is missing. It won't load the
new version and I can not delete the software either. HELP!
<http://images.apple.com/support/images/emails/apple_logo_gray.gif>
<https://discussions.apple.com/index.jspa> Apple Support Communities
Re: I want to install the latest version of i tunes. I recieve an error that
the MSI file is missing. It won't load the new version and I can not delete
the software either. HELP!
created by b noir <https://discussions.apple.com/people/b+noir> in iTunes
for Windows - View the full discussion
<https://discussions.apple.com/message/17708214?ac_cid=142432#17708214
Maybe you are looking for
-
Verifying a Digital Signature using message digest
Hi, i am new to java. I have a Digitally signed document, i wanna verify this signed document against the original one. i got the idea from this link: http://help.sap.com/saphelp_45b/helpdata/en/8d/517619da7d11d1a5ab0000e835363f/content.htm i signed
-
Updating a CLOB using the JDBC 8.1.6 driver
I have two issues on which comments are welcome. ( I am using the thin driver ) 1. Using the JDBC 2.0 way of updating a CLOB is not possible as the manuals state that this can cause "serious corruption". 2. Using the Oracle specific way ( using Oracl
-
OracleBI Spreadsheet Add-in can only be in one Excel instance only?
Hi everyone Is it true that we can have the add-in in one Excel instance only? (when I started my 2nd Excel, the OracleBI menu does not show up) djoni
-
Datamanager not visible in BPC 7,0 MS
We have installed the BPC 7.0 MS version. When checked the server settings/diagnostic everything checked out OK(Green tick marks). We are able to do all tasks from Excel, web administration etc. But when we connect BPC for Excel, Data Manager is not
-
HT1430 What is wrong with the new 7.0.3 (11B511) iOS? Keeps locking up.
Will not respond to any buttons (Home, On/off, screen touch). Eventually shuts itself off.