Is it possible to log to the ULS in a SharePoint WCF WebService which is filed under the ISAPI folder?

Hi,
i have build a simple WCF REST JSON WebService inside a SharePoint Solution which is filed under the ISAPI folder. There are many samples on the web which are good and work fine:
http://ranaictiu-technicalblog.blogspot.de/2011/09/sharepoint-2010-access-wcf-service-with.html
http://jbarkes.blogspot.de/2014/04/sharepoint-2013-create-custom-wcf-rest.html
https://jobrocol.wordpress.com/2012/06/03/custom-rest-wcf-service-in-sharepoint-2010/comment-page-1/
But my question: Do you log to the ULS out of such a Service or does the caller log (i thought about delivering a good explaination of what went wrong)? If the service need to log: How can i log to the ULS from inside a WCF Service which runs inside a SharePoint
Solution?

First, let me say THANK YOU for wanting to log to the SharePoint / ULS logs... FAR FEW SOLUTIONS do this.
here's my 2010/2013 template : http://www.sbrickey.com/Tech/Blog/Post/Custom_Logging_in_SharePoint_2010
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Similar Messages

OK I have a question about "game center" Is it possible to log into the game center with a different apple ID, just within the game center and not anywhere else in the phone?

I have 2 Iphones, 1 is a personal phone and the other is a work phone, i will be using my work phone only right away, I have an appointed Apple ID on my work phone and i want to transfer my Clash of clans Village with out having to attach my other apple ID to the phone? So basically can my Game center have 1 Apple ID and my phone use another? Hopefully that makes sense.

Well crafted story = kudos, but try this User Tip FIRST
Some Solutions for Resetting Forgotten Security Questions
ÇÇÇ

How to hide to stop receiving Direct Connect logs in the Message Folder

I have an 8350i that I use with a BES. I just recenlty had the unit swapped out under warranty, but now I can not figure out how to keep the Direct Connect calls from filling up my message folder. With my older unit it did not logs the DC calls.
I have already set the Call Logging to NONE and I have set both the Hide Filed messages and Sent message to YES
Thanks in advance,
Randy

My phone has been doing the same thing since day one. I thought there was a way to correct the symptom but instead i chose to deal with it. I wonder if an update took away this option? I scoured the owners manual and bb online with no such luck. I contaced my carrier, no luck there either, I hope someone answers this thread soon.

Is it possible to get a log of the Face Time calls?

I use Face Time on my iPhone 5. When you check the logs on the Face Time app on the phone, you can only see the most recent calls and duration. Is it possible to get find the log over a much longer time period, like a month? Is there any place where I can find it?

I'm afraid there is only the "most recent" list. Since the calls are mostly placed via Wi-Fi, your carrier can't record the dialed numbers either.

Creating a Materialized View Log After the Data has been instered

Hi,
I am trying to create a method of replication from Oracle to MySQL using the Materialized View Log table.
This has been done before and works quite well, the only problem is that I am trying to impliment the log after the table has been created and populated and wish to push all the existing data through the log file...
Does anyone know if it is possible to refresh the Materialized View Log and not a Materialized View.
The way the replication is intended to work is:
Oracle> Data inserted into table
Oracle> writes the vector data to the MVL
Script> Monitors the MVL and can see the changes being made to the Oracle Table
Script> Updates MySQL with the data and removes the rows from the MVL
MySQL is then used with other unix systems
Currently we export the data from the table using Triggers and a cronjob running every x minute to check for changes in the TriggerTables
Many thanks for your time on this, I have been checking for almost a whole working day and not found the answer to this problem.

Thats what I thought, the MVL will only read data that has changed since it was created and wont have the option to load in all the data as though it was made before the table was created.
From what I have read, the MVL is quicker than a Trigger and I have some free code that prooved to work from a MVL using it as a reference to know what records to update. There is not that much to a MVL, a record ID and type of update, New, Update or Delete.
I think what I will have to do is work on a the same principle for the MVL but use a Trigger as this way we can do a full reload if required at any point.
Many thanks for your help.

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

ICal could not log into the caldav server

Hi,
I have a OS X Lion server that i am trying to set up for home. I have made an account for myself and have got mail running for it but when I go to turn on Calendars and Reminders, i get the error message iCal could not log into the caldav server "me.com". One I am not sure how this has anything to do with me but anyway, the mail compnent works. Also when i go to the folder webdav via browser servername/webdav/ i get permission denied. I also get and Unathorized message when I try to specifically access the calendar via adress https://servername:8443/calendars/users/username/ I mention the permission denied stuff because i am assuming they are all connected to the Calendar service (ie it runs on caldav which runs on webdav). can anyone help with this as I would like to get this working.

One possiblity is that the user you created has not been granted access to the calendar service. How did you create the user on the server, via Server.app?
Are you able to browse to https://servername:8443/principals/users/username/ (of course substituting the appropriate server and user names)

Standby receiving redo logs although the log_archive_dest_n were wronly...

Hi,
The Primary site has two servers, each with one instance, using RAC.
The Standby site has another two servers and two instances using also RAC.
This is a logical Standby database, the Dataguard is working fine and the data is being replicated.
This is the configuration of the second instance of the Standby site (Server1b)
SQL> show parameter arch
NAME      TYPE      VALUE
============================================================
archive_lag_target      integer      0
log_archive_config      string      dg_config=(DB_S1, DB_S2)
log_archive_dest      string
log_archive_dest_1      string      LOCATION=+DB_ARCHIVE/DB/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=DB_S1
log_archive_dest_5 string      service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.xxx)(PORT=xxxx)))(CONNECT_DATA=(SERVICE_NAME=DB_S2_XPT)(INSTANCE_NAME=DB1)(SERVER=dedicated)))", LGWR NOAFFIRM delay=0 OPTIONALmax_failure=0 reopen=10 async=61440 db_unique_name="DB_S2" register nonet_timeout valid_for=(online_logfile,primary_role)
log_archive_dest_state_1 string      enable
log_archive_dest_state_10 string      enable
log_archive_dest_state_2 string      ENABLE
log_archive_dest_state_3 string      enable
log_archive_dest_state_4 string      ALTERNATE
log_archive_dest_state_5 string      ENABLE
log_archive_dest_state_6 string      enable
log_archive_dest_state_7 string      enable
log_archive_dest_state_8 string      enable
log_archive_dest_state_9 string      enable
log_archive_duplex_dest      string
log_archive_format      string      %t_%s_%r.dbf
log_archive_local_first      boolean      TRUE
log_archive_max_processes integer 10
log_archive_min_succeed_dest integer 1
log_archive_start      boolean      FALSE
log_archive_trace      integer      0
remote_archive_enable string      true
standby_archive_dest string
SQL>
ID      DESTINATION                STATUS      TARGET      SCHEDULE      PROCESS      MID
=============================================================================
1      +DB_ARCHIVE/db/                                           VALID          PRIMARY      ACTIVE        ARCH           0
2                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
3                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
4                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
5 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.xxx)(PORT=xxxx)))(CONNECT_DATA=(SERVICE_NAME=DB_S2_XPT)(INSTANCE_NAME=DB1)(SERVER=dedicated)))      VALID     STANDBY      PENDING      LGWR      0
6 INACTIVE PRIMARY INACTIVE ARCH      0
7 INACTIVE PRIMARY INACTIVE ARCH 0
8 INACTIVE PRIMARY INACTIVE ARCH 0
9 INACTIVE PRIMARY INACTIVE ARCH 0
10 INACTIVE PRIMARY INACTIVE ARCH 0
11 /opt/oracle/product/10.1.0/db_1/dbs VALID      STANDBY      ACTIVE      RFS      0
/arch
Here the configuration does not make sense at all. So, how is it possible that this Server (Server1b) is receiving redo logs from the Primary site?
Thank you.
Edited by: user11281526 on 21-oct-2009 7:39
Edited by: user11281526 on 22-oct-2009 0:37
Edited by: user11281526 on 22-oct-2009 0:39
Edited by: user11281526 on 22-oct-2009 0:45

Hi,
The Primary site has two servers, each with one instance, using RAC.
The Standby site has another two servers and two instances using also RAC.
This is a logical Standby database, the Dataguard is working fine and the data is being replicated.
This is the configuration of the second instance of the Standby site (Server1b)
SQL> show parameter arch
NAME      TYPE      VALUE
============================================================
archive_lag_target      integer      0
log_archive_config      string      dg_config=(DB_S1, DB_S2)
log_archive_dest      string
log_archive_dest_1      string      LOCATION=+DB_ARCHIVE/DB/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=DB_S1
log_archive_dest_5 string      service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.xxx)(PORT=xxxx)))(CONNECT_DATA=(SERVICE_NAME=DB_S2_XPT)(INSTANCE_NAME=DB1)(SERVER=dedicated)))", LGWR NOAFFIRM delay=0 OPTIONALmax_failure=0 reopen=10 async=61440 db_unique_name="DB_S2" register nonet_timeout valid_for=(online_logfile,primary_role)
log_archive_dest_state_1 string      enable
log_archive_dest_state_10 string      enable
log_archive_dest_state_2 string      ENABLE
log_archive_dest_state_3 string      enable
log_archive_dest_state_4 string      ALTERNATE
log_archive_dest_state_5 string      ENABLE
log_archive_dest_state_6 string      enable
log_archive_dest_state_7 string      enable
log_archive_dest_state_8 string      enable
log_archive_dest_state_9 string      enable
log_archive_duplex_dest      string
log_archive_format      string      %t_%s_%r.dbf
log_archive_local_first      boolean      TRUE
log_archive_max_processes integer 10
log_archive_min_succeed_dest integer 1
log_archive_start      boolean      FALSE
log_archive_trace      integer      0
remote_archive_enable string      true
standby_archive_dest string
SQL>
ID      DESTINATION                STATUS      TARGET      SCHEDULE      PROCESS      MID
=============================================================================
1      +DB_ARCHIVE/db/                                           VALID          PRIMARY      ACTIVE        ARCH           0
2                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
3                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
4                     INACTIVE      PRIMARY      INACTIVE      ARCH      0
5 (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.xxx)(PORT=xxxx)))(CONNECT_DATA=(SERVICE_NAME=DB_S2_XPT)(INSTANCE_NAME=DB1)(SERVER=dedicated)))      VALID     STANDBY      PENDING      LGWR      0
6 INACTIVE PRIMARY INACTIVE ARCH      0
7 INACTIVE PRIMARY INACTIVE ARCH 0
8 INACTIVE PRIMARY INACTIVE ARCH 0
9 INACTIVE PRIMARY INACTIVE ARCH 0
10 INACTIVE PRIMARY INACTIVE ARCH 0
11 /opt/oracle/product/10.1.0/db_1/dbs VALID      STANDBY      ACTIVE      RFS      0
/arch
Here the configuration does not make sense at all. So, how is it possible that this Server (Server1b) is receiving redo logs from the Primary site?
Thank you.
Edited by: user11281526 on 21-oct-2009 7:39
Edited by: user11281526 on 22-oct-2009 0:37
Edited by: user11281526 on 22-oct-2009 0:39
Edited by: user11281526 on 22-oct-2009 0:45

How to view log of the exception occured in an application

Hi All,
While running the webdynpro application in the portal currently we are displaying some generic error messages in the catch block to make it user friendly.
If some exception occurs, how is it possible for the user to view the error log in the portal itself so that the user may get a clear and detailed description of the same.
Kindly suggest a solution for this.
Thanks,
Mitali

Hi Mitali,
To view the logs use the url http://<host>:<port>/nwa > Monitoring
OR
can look up the exception ID by doing the following.
1. Navigate to System Administration->Support->Portal Runtime->Log Viewer
2. Enter the exception id in the Search box and click on search in all files.
3. It should popup a new window with your error message.
OR
all of your portal logs will go to defaultTrace.trc which is located under cluster/server0/log
You can still watch this file through the portal log viewer.
OR
It it does not work for changes in the log viewing
See the following:
http://help.sap.com/saphelp_nw04/helpdata/en/ba/0aa94076b63713e10000000a155106/frameset.htm
Reagrds.
Rajat

I cannot log into the oracle account using GNOME interface

I'm receiving the following message when trying to log into the oracle OS account with the GNOME interface turned on:
GDM could not write to your authorization file. This could mean that you are out of disk space or that your home directory could not be opened for writing. In any case, it is not possible to log in. Please contact your system administrator.
I can successfully ssh into the oracle account via a terminal window session.
df -h on the host does not show a problem with disk space:
[root@oel1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
3.9G 2.6G 1.1G 71% /
/dev/xvda1 99M 13M 81M 14% /boot
tmpfs 513M 0 513M 0% /dev/shm
/dev/mapper/VolGroup00-u02
20G 173M 19G 1% /u02
/dev/mapper/VolGroup00-u03
20G 1.9G 17G 10% /u03
/dev/mapper/VolGroup00-u01
20G 44M 19G 1% /u01
/dev/mapper/VolGroup00-orabin
7.9G 147M 7.4G 2% /orabin
/dev/mapper/VolGroup00-tmp
2.0G 68M 1.9G 4% /tmp
/dev/mapper/VolGroup00-home
2.0G 68M 1.9G 4% /home
Some searching on the internet indicated that the .Xauthority file was the problem.
I noticed that there was no .Xauthority file in the /home/oracle directory. I logged into the oracle OS account via a terminal session and issued the command mkxauth -c. This created an .Xauthority file in my /home/oracle directory. The file has the following permissions which look like they match other hosts we have the Oracle Database running on:
-rw------- 1 oracle oinstall 265 2011-03-08 13:32 /home/oracle/.Xauthority
Any heal is greatly appreciated.
JS

Thanks for the replies. I obviously had something screwed up in my environment in terms of file permissions.
I decided that since I am new to Oracle VM and management of the Oracle Enterprise Linux VM templates, and that this was a new instance of the OEL5 template installation, I would start over. So I unzipped the OEL5 template, copied over my vm.cfg file which configures the template instance and brought up a new copy of the OEL5 VM instance. I then logged into it as root, changed the oracle account password and started the GNOME interface with telinit 5 command.
I was then able to log in successfully to the oracle account via the GNOME interface.
Thanks for the replies.
John S.

[svn] 869: Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs

Revision: 869
Author: [email protected]
Date: 2008-03-19 15:21:25 -0700 (Wed, 19 Mar 2008)
Log Message:
Bug: BLZ-92 - catch IOException and log at the info level to keep from polluting the logs
QA: Yes
Doc: No
Details:
Tomcat 5+ throws a ClientAbortException when it receives a TCP RST while writing a response to a client that has exited. This custom exception extends IOException, and we were only doing lighter INFO-level logging for SocketExceptions so the ClientAbortException was getting past this leading to ERROR level logging. This little tweak will mean less pollution of the server logs during QE load tests.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-92
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/endpoints/BaseHTTPEndpoint.ja va

Hi AbhijitRoy2005,
Other then climbing in the phone and calling the vendor, you could try:
1. To use a BufferedInputStream to wrap the SocketInputStream before you wrap that in the DataInputStream. So basically:
DataInputStream dis = new DataInputStream(new BufferedInputStream(socket.getInputStream());On one of my implementations this made a difference of a factor of 200+! So instead of processing 500 messages per second, I could process 10000 messages per second!
2. Or to take it to the next level and take a look at using NIO. That is New IO, available since Merlin (Java 1.4). But that would take you way more time then the first attempt.
The thing addressed by the possible solutions above is the blocking nature of the Stream based socket handling. Using a buffered input stream reads ahead. The NIO thing is all about non-blocking IO, which uses Channels and Buffers instead of Sockets and Streams (note that these are not equivalent!).
Of course, if you didn't change something in your own code, it might just very well be that the vendor just screwed up his ;)
Regards,
Frens

Total no. of users logged into the database

Can we find out total number of users logged into the database? I do not have DBA privileges.
If it is not possible by a straight SQL then do I have any other options?
Thanks.

You can find the list of all users using the query "Select * from V$Sesssion_connect_info". This requires access to system tables. But this query gives the OS user information and not the database user information.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Krishnan:
Can we find out total number of users logged into the database? I do not have DBA privileges.
If it is not possible by a straight SQL then do I have any other options?
Thanks.<HR></BLOCKQUOTE>
null

Firefox is filling the entire screen so that the controls are off the top & bottom of the screen, & I have to log off the computer to get out of Mozilla.

Usually, there are controls at the top & bottom of the screen, & I can log off whatever program I'm in, but now Firefox is filling the whole screen: I can go from one tab to another within Firefox; however, I can't get out of Firefox without logging off the computer.

It is possible that the screen is too high and that the title bar and status bar do not show.
Open the system menu via Alt+Space and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
Also make sure that you are not in "View > Full Screen" mode.
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf<br />
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)

Configure the Change Log for the activity

Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte

Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda

ZCM 11 : Unable to log onto the WIRC

Hi,
We recently switched from Zenworks 6.5 to Zenworks 11, i just installed the reporting server a couple days ago everything works fine from the ZCC, i can connect to the infoview without any problem but when it comes to login to the Web intelligent rich client, i am just unable to log on it, every possible combination that i use gives me credentials error which are good because i am logged in the ZCC with the same account/password. As there are very little documentation about this in the novell documentation, you guys are my last hope to make this work.
So we're using an LDAP user source so at the authentication i chose the LDAP. As for system this is where i am really not sure about what to enter there, i tried a couple of things like our server name, zone name, zenworks but all of them did not work. If anyone could point me in the right direction i would be thankful
Thank you,
Pier-Olivier Plante

poplante,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Is it possible to log to the ULS in a SharePoint WCF WebService which is filed under the ISAPI folder?

Similar Messages

Maybe you are looking for