Configure the Change Log for the activity
Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte
Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda
Similar Messages
-
Activate change logs for the table V_T007K
Hi,
Change log check box is activated in table and change logs is activated in system. But still I am not able to view any change logs recorded for the table V_T007K using SCU3 transaction.
I tried by changing some data and than checked the SCu3 transaction. nothing is recorded against the table.
Please let me know what needs to be done to capture the change logs for the changes done to the data in the table V_T007k table.
Thanks in Advance.
Thanks & Regards,
Madhuri.Hi
The table u mentioned V_T007k is not a transparent table
.its a view only for views u cant track changes.
But only for transparent tables u can only track changes thru SCU3
Also u can find the changes in a table from SAP TABLE
CDHDR and CDPOS.
if helpful reward me points.
Regards
Manas Ranjan Panda -
How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjanhello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards. -
How to check and delete the change logs for DSO
Hello All,
I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
Thanks,
MHi
Check out the below two articles
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
Regards,
Venkatesh -
How do the change management for the configuration of the adapters
Hi all.
How do the change management for the configuration of the adapters, when i transport the software version component from an development system to production system.
For example, for to change the url parameters of adapters soap inside the production system. I will need type, the news values in this system?
Thanks
Best Regards.There is an option to pass all the paramters except those who changes from
system to system.
for example,
if you are reading from a file from the directory: <SYS>\CREMAS_<TS>.XML
when <SYS> is DEV or QAS or PROD, and <TS> is time stamp,
you can create channel template that read file with file pattern CREMAS_*.XML,
this can save you a lot of work, however, parameters that are diffrent in every system, (in this case the directory DEV,QAS,PROD) you must enter manually in every system. -
SQL0964C The transaction log for the database is full
Hi,
i am planning to do QAS refresh from PRD system using Client export\import method. i have done export in PRD and the same has been moved to QAS then started imported.
DB Size:160gb
DB:DB2 9.7
os: windows 2008.
I facing SQL0964C The transaction log for the database is full issue while client import and regarding this i have raised incident to SAP then they replied to increase some parameter like(LOGPRIMARY,LOGSECOND,LOGFILSIZ) temporarily and revert them back after the import. Based on that i have increased from as below mentioned calculation.
the filesystem size of /db2/<SID>/log_dir should be greater than LOGFILSIZ*4*(Sum of LOGPRIMARY+LOGSECONDARY) KB
From:
Log file size (4KB) (LOGFILSIZ) = 60000
Number of primary log files (LOGPRIMARY) = 50
Number of secondary log files (LOGSECOND) = 100
Total drive space required: 33GB
To:
Log file size (4KB) (LOGFILSIZ) = 70000
Number of primary log files (LOGPRIMARY) = 60
Number of secondary log files (LOGSECOND) = 120
Total drive space required: 47GB
But still facing the same issue. Please help me to resolve the ASAP.
Last error TP log details:
3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
4 ETW000 1 entry from FAGLFLEX08 (210) deleted.
4 ETW000 1 entry for FAGLFLEX08 inserted (210*).
4 ETW675 end import of "R3TRTABUFAGLFLEX08".
3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
4 ETW000 [ dev trc,00000] Fri Jun 27 02:20:21 2014 -774509399 65811.628079
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN) 85 65811.628164
4 ETW000 [ dev trc,00000] &+ DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000 83 65811.628247
4 ETW000 [ dev trc,00000] &+ SQLSTATE=57011 row=1
4 ETW000 51 65811.628298
4 ETW000 [ dev trc,00000] &+
4 ETW000 67 65811.628365
4 ETW000 [ dev trc,00000] &+ DELETE FROM "FAGLFLEXA" WHERE "RCLNT" = ?
4 ETW000 62 65811.628427
4 ETW000 [ dev trc,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=8, reopt=0
4 ETW000 58 65811.628485
4 ETW000 [ dev trc,00000] &+
4 ETW000 53 65811.628538
4 ETW000 [ dev trc,00000] &+ Input SQLDA:
4 ETW000 52 65811.628590
4 ETW000 [ dev trc,00000] &+ 1 CT=WCHAR T=VARCHAR L=6 P=9 S=0
4 ETW000 49 65811.628639
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.628689
4 ETW000 [ dev trc,00000] &+ Input data:
4 ETW000 49 65811.628738
4 ETW000 [ dev trc,00000] &+ row 1: 1 WCHAR I=6 "210" 34 65811.628772
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.628823
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.628873
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END) 27 65811.628900
4 ETW000 [ dbtran ,00000] ***LOG BY4=>sql error -964 performing DEL on table FAGLFLEXA
4 ETW000 3428 65811.632328
4 ETW000 [ dbtran ,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000 46 65811.632374
4 ETW000 [ dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL' 59 65811.632433
4 ETW000 RSLT: {dbsl=99, tran=1}
4 ETW000 FHDR: {tab='FAGLFLEXA', fcode=194, mode=2, bpb=0, dbcnt=0, crsr=0,
4 ETW000 hold=0, keep=0, xfer=0, pkg=0, upto=0, init:b=0,
4 ETW000 init:p=0000000000000000, init:#=0, wa:p=0X00000000020290C0, wa:#=10000}
4 ETW000 [ dev trc,00000] dbtran ERROR LOG (hdl_dbsl_error): DbSl 'DEL' 126 65811.632559
4 ETW000 STMT: {stmt:#=0, bndfld:#=1, prop=0, distinct=0,
4 ETW000 fld:#=0, alias:p=0000000000000000, fupd:#=0, tab:#=1, where:#=2,
4 ETW000 groupby:#=0, having:#=0, order:#=0, primary=0, hint:#=0}
4 ETW000 CRSR: {tab='', id=0, hold=0, prop=0, max.in@0=1, fae:blk=0,
4 ETW000 con:id=0, con:vndr=7, val=2,
4 ETW000 key:#=3, xfer=0, xin:#=0, row:#=0, upto=0, wa:p=0X00000001421A3000}
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
4 ETW690 COMMIT "14208" "-1"
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] CON = 0 (BEGIN) 16208 65811.648767
4 ETW000 [ dev trc,00000] &+ DbSlModifyDB6( SQLExecute ): [IBM][CLI Driver][DB2/NT64] SQL0964C The transaction log for the database is full.
4 ETW000 75 65811.648842
4 ETW000 [ dev trc,00000] &+ SQLSTATE=57011 row=1
4 ETW000 52 65811.648894
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.648945
4 ETW000 [ dev trc,00000] &+ INSERT INTO DDLOG (SYSTEMID, TIMESTAMP, NBLENGTH, NOTEBOOK) VALUES ( ? , CHAR( CURRENT TIMESTAMP - CURRENT TIME
4 ETW000 50 65811.648995
4 ETW000 [ dev trc,00000] &+ ZONE ), ?, ? )
4 ETW000 49 65811.649044
4 ETW000 [ dev trc,00000] &+ cursor type=NO_HOLD, isolation=UR, cc_release=YES, optlevel=5, degree=1, op_type=15, reopt=0
4 ETW000 55 65811.649099
4 ETW000 [ dev trc,00000] &+
4 ETW000 49 65811.649148
4 ETW000 [ dev trc,00000] &+ Input SQLDA:
4 ETW000 50 65811.649198
4 ETW000 [ dev trc,00000] &+ 1 CT=WCHAR T=VARCHAR L=44 P=66 S=0
4 ETW000 47 65811.649245
4 ETW000 [ dev trc,00000] &+ 2 CT=SHORT T=SMALLINT L=2 P=2 S=0
4 ETW000 48 65811.649293
4 ETW000 [ dev trc,00000] &+ 3 CT=BINARY T=VARBINARY L=32000 P=32000 S=0
4 ETW000 47 65811.649340
4 ETW000 [ dev trc,00000] &+
4 ETW000 50 65811.649390
4 ETW000 [ dev trc,00000] &+ Input data:
4 ETW000 49 65811.649439
4 ETW000 [ dev trc,00000] &+ row 1: 1 WCHAR I=14 "R3trans" 32 65811.649471
4 ETW000 [ dev trc,00000] &+ 2 SHORT I=2 12744 32 65811.649503
4 ETW000 [ dev trc,00000] &+ 3 BINARY I=12744 00600306003200300030003900300033003300310031003300320036003400390000...
4 ETW000 64 65811.649567
4 ETW000 [ dev trc,00000] &+
4 ETW000 52 65811.649619
4 ETW000 [ dev trc,00000] &+
4 ETW000 51 65811.649670
4 ETW000 [ dev trc,00000] *** ERROR in DB6Execute[dbdb6.c, 4980] (END) 28 65811.649698
4 ETW000 [ dbsyntsp,00000] ***LOG BY4=>sql error -964 performing SEL on table DDLOG 36 65811.649734
4 ETW000 [ dbsyntsp,00000] ***LOG BY0=>SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1
4 ETW000 46 65811.649780
4 ETW000 [ dbsync ,00000] ***LOG BZY=>unexpected return code 2 calling ins_ddlog 37 65811.649817
4 ETW000 [ dev trc,00000] db_syflush (TRUE) failed 26 65811.649843
4 ETW000 [ dev trc,00000] db_con_commit received error 1024 in before-commit action, returning 8
4 ETW000 57 65811.649900
4 ETW000 [ dbeh.c ,00000] *** ERROR => missing return code handler 1974 65811.651874
4 ETW000 caller does not handle code 1024 from dblink#5[321]
4 ETW000 ==> calling sap_dext to abort transaction
2EETW000 sap_dext called with msgnr "900":
2EETW125 SQL error "-964" during "-964" access: "SQL0964C The transaction log for the database is full. SQLSTATE=57011 row=1"
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20140627022021"
1 ETP111 exit code : "12"
1 ETP199 ######################################
Regards,
RajeshHi Babu,
I believe you should have taken a restart of your system if log primary are changed. If so, then increase log primary to 120 and secondary to 80 provide size and space are enough.
Note 1293475 - DB6: Transaction Log Full
Note 1308895 - DB6: File System for Transaction Log is Full
Note: 495297 - DB6: Monitoring transaction log
Regards,
Divyanshu -
You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?
Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles -
How many calls are held in the call log for the iPhone 3g?
How many calls are held in the call log for the iPhone 3g?
Creating a separate CSQ is the way to do it. Keep in mind that depending on your error handling, a single request could still generate more than one call into the CSQ. You would want to look at the CCDR table for the call ID or write the ImplementationID into one of the Enterprise Data variables that gets stored to the DBA to act as a UID.
-
Table which gives all change log for the Documnets( Contract)
Hi folks,
I need to know wchich table will capture all the change log in documents (contratc, quotaion , sales order)
please let me know the Table name where i can get change log details when i input the order no.
Its very urgent please let me know ASAP.
Thanks,
Ravi
Edited by: raviraju nadimpally on Sep 4, 2008 9:28 PMHello,
check these tables CDPOS, CDHDR
Prase -
Need to know the details on the change logs on the invoice output condition master records
All,
Recently, there seems to be a change made in VV32 transaction for Billingoutput types with regard to printer device names,
I am unable to track down these changes. NACH provides information about created by & created on information, but i am not able to track the changes that were made against output condition records, is there any ways of identifying such changes using easier methods or even through CDHDR/ CDPOS tables.
I tried executing CDPOS, but unable to proceed as i was not sure / do not know the ways of entries that i need to provide in CDHDR / CDPOS tables for my scenario.
Can some one please help. Thanks in Advance.
Regards
IlangoHi Ilango,
if you don't activated the change logs, you just can find the chances made by identify the last two transports. So you need to go the way you started. Unfortunaly it could be, that you can't find the old settings anyway because there might be a * in...
I know an easier way to find the old values.
You can talk to your basis-guys if they got an older backup available and can backup it in an extra system. But that includes some extra work and the additional host.
~Florian -
A function module to add an entry to the change log of the ODS needed
Hi all,
I want to add an entry to the change log table of the ODS .
Is there a Function module available for this or a work around for this.
Regards
AkshayHi Kiran,
You can directly add days to the date.
Eg:
DATA date LIKE sy-datum.
DATA days TYPE i.
date = sy-datum.
days = 100.
date = date + days.
WRITE date.
Regards
Wenceslaus -
SQLException in the audit log for the Message Display Tool
Hi
I´m newbie in PI Technology, and i have some issues when i try to do the next.
This is the scenario:
I need to communicate two systems, for one side i have SAP, and for the other side i have ADI (legal system) so, i use PI to do this (the communication), PI receive the data from SAP by means abap proxy, until this everything is correct, then i do the mapping of the data and i send a message to ADI (with the SAP XI Runtime Workbench) by means JDBC adapter, if i check the sended message with "Message Display Tool" show that the message was sent (status "Delivered") but if i check the received messages option, in the audit log displays the five next errors:
Error: Could not execute statement for table/stored proc. "FADIA4" (structure "StatementFADIA4") due to java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation.
Error: Adapter Framework caught exception: null
Error: Delivering the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'FADIA4' (structure 'StatementFADIA4'): java.sql.SQLException: FADIA4 in FILEMET not valid for operation..
if there are somebody that maybe could know what is the problem?, could the problem be the side of the legal system?, because inside of PI when i do the Test Configuration in the Integration Directory, the end of the test is successful.
Any comment is well received!!
Thanks,
Vicman
P.D. sometimes the error is: java.sql.SQLException: Token ) was not valid. Valid tokens: DAY PATH YEAR LABEL MONTH OPTION RESULT CONNECTION TRANSACTION.
what does it means?Hi Pooja,
thanks for you quickly response!
XML sended:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_PgDocVentaECC_req xmlns:ns0="http://gmodelo.com/ECC/enviarCobranza">
<DT_DatosDeControl>
<MIDDLEWARE_ID/>
<QUICK_ID/>
<INTERFACE_NAME/>
<MESSAGE_ID/>
<LOG_ID/>
<USER_ID/>
<SOURCE_SYSTEM/>
<TARGET_SYSTEM/>
</DT_DatosDeControl>
<DT_PagoDocVentaECC>
<VKORG>TVKO</VKORG>
<VKBUR>TVBUR</VKBUR>
<VKBUR1>TVBUR</VKBUR1>
<ROUTE>TVRO</ROUTE>
<ROUTE1>TVRO</ROUTE1>
<BLART>Q</BLART>
<BELNR>100</BELNR>
<WRBTR>200</WRBTR>
<LFART>100</LFART>
<VBELN>100</VBELN>
</DT_PagoDocVentaECC>
</ns0:MT_PgDocVentaECC_req>
this is the XML received:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_PgDocVentaADI_req xmlns:ns1="http://gmodelo.com/ADI/recibirCobranza">
<StatementFADIA7>
<FADIA7action="INSERT">
<Table>FADIA7</Table>
<Access>
<NUMCIA>123</NUMCIA>
<NUMALM>234</NUMALM>
<SUBALM>300</SUBALM>
<CVETOP>16</CVETOP>
<FOLOPV>22</FOLOPV>
<SECOVA></SECOVA>
<IMPOVA>200</IMPOVA>
<ALMOVA>5678</ALMOVA>
<SUBOVA>21</SUBOVA>
<TOPOVA>21</TOPOVA>
<FOPOVA>41</FOPOVA>
<FECOVA>100</FECOVA>
<STSOVA> </STSOVA>
</Access>
</FADIA7></StatementFADIA7>
</ns1:MT_PgDocVentaADI_req>
what do you think about it?, anything wrong? -
Values in the change log for activities
Hi,
Some fields "Z" that were created in the structure CRMD_ORDERADM_H and had the flag "change document" checked in data element to record changes in the log of changes in activities. These fields on the screen are the picklist format and are registering as old value and new value in the view of the component BTCHIST codes defined for the picklist, but I need the description displayed in the picklist is registering iin these columns of old and new value.
I would like the log of these fields were as the status field of activity, information internally changed is the status code, but the log displays the status description.
Thanks and Regards
MarkHello,
Sorry if I do not have a solution for your exact problem, but I do know that SAP created an OSS note to fix the behavior you described for marketing scenarios... Kindly check the following note:
Note 1237443 - Display clear text values for EEW fields in change documents
So I would recommend to double check on http://service.sap.com/notes if you can find similar note for your issue. Or you can try to implement similar steps as the ones described in this note 1237443 to your component.
Kind regards,
Nicolas Busson. -
Get the Change log for ALV line items
Hello Experts,
I am using editable ALV table to display/change data. When user modifies data from ALV line items manually (direct entry), this change is recorded in get_context_change_log method of context node. Also in the screen I have one button, on click of this button I do some calculation for selected line items in action method and update the context node with new values. But with this second approach (button action) though values gets changed this is not recorded in to get_context_change_log of context node. I tried to use method add_context_attribute_change in button action method to add attribute changes to change log tabel but it's not adding entries to change log. Does method add_context_attribute_change only works with OVS search helps and freely programmed value helps? And is there any other way for capturing changes(done by using action method and not manually) for ALV line items?
Thanks & Regards
JayantHere is code:
METHOD.
This method is in component controller, which gets called from View Action method (on click * of button).
FIELD-SYMBOLS:<lfs> TYPE Data.
*Data Declaration
DATA lo_nd_cn_apc_item TYPE REF TO if_wd_context_node.
DATA lit_apc_item TYPE wd_this->elements_cn_apc_item.
DATA lo_el_cn_apc_item TYPE REF TO if_wd_context_element.
data: l_component type ref to if_wd_component,
l_context type ref to if_wd_context,
lfd_added type abap_bool.
CLEAR:lo_nd_cn_apc_item,lo_el_cn_apc_item.
navigate from <CONTEXT> to <CN_APC_ITEM> via lead selection
lo_nd_cn_apc_item = wd_context->get_child_node( name = wd_this->wdctx_cn_apc_item ).
REFRESH:lit_apc_item.
@TODO handle non existant child
IF lo_nd_cn_apc_item IS NOT INITIAL.
lo_nd_cn_apc_item->get_static_attributes_table( IMPORTING table = lit_apc_item ).
get element via lead selection
lo_el_cn_apc_item = lo_nd_cn_apc_item->get_element( ).
ENDIF.
l_component = wd_this->wd_get_api( ).
l_context = l_component->get_context( ).
Calculate Cost
LOOP AT lit_apc_item ASSIGNING <lfs>.
<lfs>-cal_amount = ( <lfs>-cost_percent * <lfs>-sec_amount ) / 100.
lfd_added = l_context->add_context_attribute_change(
element = lo_el_cn_apc_item
attribute_name = 'CAL_AMOUNT'
new_value = <lfs>-cal_amount
ENDLOOP.
Bind Table.
lo_nd_cn_apc_item->bind_table( new_items = lit_apc_item set_initial_elements = abap_true ).
ENDMETHOD. -
Issue with the change pointer for the reduced message type ZMATMAS
Hi All,
I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE) are not getting fill with the values. They are always filling with the values '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
1. Create reduction maintenance ZMATMAS (Tcode BD53)
keep the default selected segments E1MARAM, E1MAKTM
2. Add following data to maintain table view for the message type ZMATMAS (Tcode BD52)
Object Table Name Field Name
MATERIAL MARA KEY
MATERIAL MARA LAENG
MATERIAL MARA BREIT
MATERIAL MARA HOEHE
3. Activate particular change pointer in BD50
Message Type Active
ZMATMAS yes
4. Activate change pointers u2013 Generally (Tcode BD61).
5. Assign Segment fields to change document fields (Tcode BD66 )
Segment Type Field Name Object Table Name Field Name
E1MARAM BREIT MATERIAL MARA BREIT
E1MARAM HOEHE MATERIAL MARA HOEHE
E1MARAM LAENG MATERIAL MARA LAENG
6. I have done the distribution model settings (BD64) and the idoc configurations
1. Logical System
2. RFC destination
3. Create port
4. Create partner profile
7. I changed the fields in material master data(Tcode MM02) and I executed the Tcode BD21.
Idoc is generated but the fields are not getting fill with the values
(Note: some fields are filled with values e. g material number, material description)
I checked the Idoc data segment E1MARAM (WE02)
Fld name Fld cont.
LAENG /
BREIT /
HOEHE /
Can you please let me know the issue
PradIssue is solved when I select the segments and the fields in the segments (Tcode :BD53)
Prad
Maybe you are looking for
-
Performance issue of BI reports in SAP Enterprise portal
Dear Friends, We have integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to performance effect. In Bex ( BI side) reports performan
-
How can I share a movie with my boyfriend?
I have bought a movie on iTunes using my Apple ID and have watched it on my iPad. A couple of questions about sharing... Firstly, can we watch my movie on his Mac? My iPad is assigned to my laptop back home, and he has his own iTunes set up on his M
-
Missing Functionality in credit memo
On steps: 1. We create goods AB - 10 pieces serial numbers a1, a2, a3, a4, a5, a6, a7, a8, a9, a10 2. We create delivery 1 on 1 pcs with number-a1 3. We create delivery 2 on 2 pcs with numbers-a2, a3 4. We create delivery 3 on 1 pcs with number a4 5.
-
Final Cut Pro 5.1.4 Update
Final Cut Pro 5.1.4 provides important bug fixes to resolve plugin issues . This update is recommended for all Final Cut Pro 5.1, 5.1.1, 5.1.2 and 5.1.3 customers. FXplug fixed? Remember to backup your current working version first. NO new info about
-
Reader Crashes when I use the Find function
Hey All, Everytime I try and search a document using the find box at the top of Reader, the entire program crashes. Anyone know how to fix this ? I have tried reinstalling. I am using Vista Ultimate. Thanks