Is it possible to make a change in the library that is called in a subvi? (in this case the GetCoefficients in the Levemberg-Marguardt curve fit)

Hi,
I need to make a change in the way the new coefficients are calculated. It's the "get new coefficients.vi" in the nonlinear levenberg marquardt algorithm.
A library is called, but the change must be made in that library. Is there any way to do this? I do understand C++ or similar language where the library might be programmed in, that's not the problem.
with kind regards
Hasse wiersma

No, we do not have access to the source code for that shared library, it ships as part of LabVIEW and only NI has the source code. You will need to re-write (either in LabVIEW or C++/DLL) all the code completely.
-Jim

Similar Messages

Is it possible to make a reflection of an image that will change with the image? [was: Reflection]

Is it possible to make a reflection of an image that will change with the image?

normfb wrote:
I believe that a Smart Object will solve your problem.
place your original image in a new file as a smart object and do the same for the reflection (made by Transforming, reducing the opacity and introducing a mild horizontal motion blur) on its own layer, then:
by double clicking on the smart object in the layers panel and returning to the original image, any change you make in the original and save, will automatically update the upright image and its reflection.
Nice one Norm. Five Kudos points to you.

How is it possible to download Lion on a Macbook Air. I have the answer that "it can't be downloaded on this computer". I bought it with my previous MacBook and I would like to make DVD of it. Thank you.

How is it possible to download Lion on a Macbook Air. I have the answer that "it can't be downloaded on this computer". I bought it with my previous MacBook and I would like to make DVD of it. Thank you.

Check that your MBA meets the System Requirements for Lion..
See Here under General Requirements...
http://support.apple.com/kb/SP629

I have some content in my library that I do not want to sync with my ipod touch. The content has previously been synced and I want to remove it without deleting it from my itunes library. Is this possible?

I have some music content in my itunes library that I do not want to sync with my ipod touch. The content has previously been synced and I want to remove it without deleting it from my itunes library. Is this possible?

Hi Pez,
iTunes in the Cloud is not iCloud. Any songs that you have purchased but have not downloaded (or have deleted), go to iTunes in the cloud. The setting I mentioned will show all of your purchases in the various views in the Music app, whether they are on your device or not. If you turn that setting off, you will only see items that are actually on your device.
Glad to hear the second sync worked! But if they all start appearing again, make sure that setting is turned off
Cheers,
GB

On firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

Question
on firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fine

Top of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
*caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
*caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

You would have downloaded those apps with the wrong Apple ID then created a new Apple ID which is the on you are on now. This is acting as normal because all content downloaded from the iTunes and App Store is attached to the Apple ID it was downloaded with. To stop this you would delete the apps and redownload them with your current Apple ID you are signed in with.

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

I have upgraded my computer to program the MAC OS X but would like to remove this update and revert to the old one. Is this possible and how do I proceed?

Not easily, unless you backed up your data.
Did you? If not, let that be a lesson to never install anything without a backup:
https://discussions.apple.com/docs/DOC-1992
https://discussions.apple.com/docs/DOC-1948

Even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold

even after adding the country code i can't seem to make any international calls.im not sure if this is relevant but apparently, the option dial assist is not to be found on my setting.pls direct me...thank you.and my phone moddle is 5s(A1457)gold eddition.

Hi, Thilina66. You say you have entered the country code but still cannot make international calls. I suppose you are adding the international access code before the country code. This internaltional access code (011 in the US, 00 in Europe, etc.) can be substituted by adding a + sign before the country code.
For example, to call a number in the UK from the US you have to dial:
011 44 7540 267898
or
+44 7540 267898
To call a number in the US from the UK you have to dial:
00 1 212 456 1470
or
+1 212 456 1470
Please check that the contact number in your address book is correctly written if you are dialing directly from the address book or that you enter the correct numbers in the keyboard if you are dialing from the keyboard.

TS3899 How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

TS4002 when I was assigned my ".me accounts.... I used the name of the company that I worked for. Then I received a iCloud account. The problem is I want to change the two original names but can't because they're greyed out. Is there anything I can do?

When I was assigned my ".me accounts I used the name of the company that I worked for. Then I received a iCloud account. The problem is I want to change the two original names but can't because they're greyed out. Is there anything I can do?
Thanks in advance,
Majormidi

http://discussions.apple.com/thread.jspa?messageID=3366422
Odd, the link works for me.
-mj
[email protected]

It's possible to make simultaneous changes in the following architecture?

For safety issues we can't deploy apps through nwds, so the only way to impact on the environment is release and import activity in the environment.
We set the nwdi with environments dev, qa and prd.
What I see is:
- I make a change to a dc A and released it to test in qa.
- Then i make a change to a dc B, released it to test in qa, the user test, gime the ok and i transport it to prd.
- When i make the assembly proccess it put all the changes, which i did in the dc to and which I did in the dc b (I guess it's because both tasks released).
- So this is a configuration problem of di, or a limitation that does not allow assets to pass separately changes
Regards.

Limitation of NWDI in combination with the Software Component model...
So in other words you couldn't do anything about it
But... since EHP1...
This limitation can be overcome by using "Activity based transporting":
see: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b016d936-6d90-2b10-159e-ecbe904cbd8a (starting chapter 3.3 on page 28)
Cheers,
Benjamin

HT4009 I would like to make an in app purchase using my $20.00 credit that I have on I tunes. I am using my i phone5. It does not give me the choice of using the credit that I have, only a credit card. How can I use the credit for the purchase??

I would like to make an in app purchase using the $20.00 credit that I have on itunes. I am using my i phone5. It does not give me the option of using the credit that I already have, only of using a credit card. How can I use the credt that I already have instead of a credit card?

Is Settings > General > Restrictions > In-App Purchases: ON (green)?
Some In-App Purchases works only with credit card.

How do I make a reference to a library that I downloaded?

The library I downloaded is not in a dll form. It has a file called source will all the necessary files in it. How do I make a reference to it so I can use it? I am using visual studio 2013 Help.

Here is where I got the library from.
http://sourceforge.net/projects/thresher/?source=typ_redirect
What does where you got the library from have to do with anything? If you don't know how to add a reference to a .Dll in Visual Studio or access a non namespace .Dll then that's the real issue isn't it?
With some .Dll's you require Pinvoke statements. I don't know if that's because they're not considered "com" visible or what. Other .Dll's you can browse to and add as references using reference manager. .Dll's are referred to as assemblies as
are executable files.
If you want to use some .Dll then you need to find out from the creator of the .Dll how to "reference" it in order to use it. .Net provides namespaces for many .Dlls. I suppose if a namespace doesn't exist for a .Dll in .Net Framework then you
may have to use Pinvokes for that .Dll.
Dynamic-Link Library Search Order
Simplifying Deployment and Solving DLL Hell with the .NET Framework
La vida loca

Is it possible to make a form on a website that can be edited and saved? If so How?

I am making a site for a client and he requires an editable form. It would need at least 10 editable text boxes and then I would need to have a way to save it and publish it to the website. (The client would be the only one editing so I don't really know what to do as he doesn't have any of the Adobe tools used to edit the site) So here are the questions I need answered:
1) How do I make an editable form? (If coding is involved I would appreciate it if you could post that as well)
2) After the site is finished my client will need to keep adding things, is this possibe or will he have to send the files to me and haveme edit the site myself?
3) How do I make it so my client will be the only one who can edit this?
P.S. I am not making a Blog. He would be adding these forms to a list of links to the files which the customers could print. If you have any questions to me just ask.
Thanks.

whatever needs to be edited by your client should be done by having your swf load an xml file and using that data. if your client doesn't know how to edit an xml file, you'll need to make another user interface app that will edit the xml for him.

Firefox keeps wanting to start in Safe Mode and it says I can make some changes permanent such as "Disable all add-ons" and others. When I select one of the options I can then "Make Changes and Restart".

When I make my selection it can then proceed to use Firefox. However the next time I open Firefox I get the same problem.
I'm using Windows 7. I have used Firefox for many years with Windows XP and never had this problem. Is there a solution?

See [[Firefox is stuck in Safe Mode]]
"Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini, extensions.sqlite) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry. New files will be created when required.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the "Find Updates" button (in Firefox 4: right-click the extension -> "Find Updates") to do a compatibility check.

Is it possible to make a change in the library that is called in a subvi? (in this case the GetCoefficients in the Levemberg-Marguardt curve fit)

Similar Messages

Maybe you are looking for