Is it possible to make a morph between loaded 3d-models?

I want to load obj-models and then make a morph between them. It's seems like it is not possible in Java3D. Or am I wrong?
A morph is made from GeometryArrays which come from shape3d-object. It is possible to get a scene from the loaded model with the load() method in the ObjectFile class. But is it also possible to exctract a geometryarray from the model, so a morph can be made?
Check out the morphs that I already have:
http://www.astralvisuals.com/ShapeShiftersnew.htm

It's not easy but it's possible:
At first you have to decide which vertex_1 from model 1 has to fade into which vertex_2 from model 2 (To decide this just check the distance).
If the two models don't have the same vertex amout just let the model with more vertexes fade into that with the lower amout of vertexes and than invert the animation if needed.
After this is done you just have to move the vertexes from frame to frame from the old position to the new position.
This is how to morph models but I don't know how to morph textures :-/

Similar Messages

Is it possible to make a menu in idvd. i like the possibility for example in the beginning of the dvd of two ours in the menu at the beginning van the dvd and between the scenes of the movie. thanks

is it possible ta make a menu in idvd. I like different menu with linking to scenes in the movie. for example in a movie of two ours in the menu at the beginning of the movie so you can chose with part of the movie you wil play. thank you for tips (holland)

djinte wrote:
is it possible ta make a menu in idvd. ...
iDVD has its own forum, here:
https://discussions.apple.com/community/ilife/idvd
what you're looking for is 'chapters', don't hesitate to make use of iM & iDVD's built-in Help.
btw: no need to write extra-large ...

Is it Possible to make a join from a single table

Hi all,
Is it Possible to make a join from a single table
Suppose HR_ALL_ORGANIZATION_UNITS table
can we make a join in the following way
HR_ALL_ORGANIZATION_UNITS.ORGANIZATION_ID =HR_ALL_ORGANIZATION_UNITS.BUSINESS_GROUP_ID
Thanks in advance

Hi
Yes you can join,
Like below =- it is called self join -
Slect a.oersson_id,a.employee_numebr, b.full_name
form
hr_all_organization_units a,
hr_all_organization_units b
where
a.person_id = b.person_id and
sysdate between a.effective_start_date and a.effective_end_date and
sysdate between b.effective_start_date and b.effective_end_date
914618 wrote:
Hi all,
Is it Possible to make a join from a single table
Suppose HR_ALL_ORGANIZATION_UNITS table
can we make a join in the following way
HR_ALL_ORGANIZATION_UNITS.ORGANIZATION_ID =HR_ALL_ORGANIZATION_UNITS.BUSINESS_GROUP_ID
Thanks in advance

Is it possible to share a sequence between computers and different projects?

Is it possible to share a sequence between computers and different projects without copying the sequence, closing the project, opening the new project and pasting in the sequence. This workflow is to slow when it takes 40 minutes for Premierer Pro CC to load a 4tb project. Just this simple thing would take 80 minutes.
Message was edited by: Kevin Monahan
Reason: Shorter, more searchable title.

Okey, I found out how to import the seaquens, it is actually possible to make that choice after you click to import seaquence. But the problem is i do not want to import the media again. I already have that media in the other projekt. And once importingit it is offline and when I want to delete it it want to remove things from the timeline defeting the purpus. Is there a way to get aroun the fact that the program wants to import the media with the timeline.
The thing is that I want to editing on two computer. On the second computer I will edit just a few scenes that I will later bring back in to the big project that has all the material. I have been copying the material for a few scenes to another external drive and also copied the big projekt and then opened this on my laptop. Then I made all the missing material offline while the projekt found the existing material. I editid the material. Copied the projekt and opened it on my stationary editing computer and copied the timeline with the scene that I had been working on while the media was loading, then shut down the project and opend the old big projekt and pasted the timeline in to the project.
Is there an easier way?
It would be nice to be able to import the timeline (without importing the media) when I have the program opened. Since it takes 40 minutes for my media to load.

Is it possible to make bookmarks available only after providing master password

Hi,
I love the sync option that has been added, but wanted to know that is it possible to make the bookmarks available only after the master password has been entered as I have a lot of bookmarks that I don't want the other persons using my system to see as I have sync my office system and my home system.
Regards,
Sam

hello sam, the best practice in this situation is to create different (password-protected) user accounts for all people using the computer: [[How do I share Firefox between people on a computer?]]

Is it possible to make the pasteboard and menus not so dark?

We just upgraded to the new CC version of Indesign. Is it possible to make the paste board and menus/palletes white, or at least not so dark? It is very difficult to see darker colors in the color palette. The high contrast between the dark pasteboard and the white page gives me a splitting headache.

apologies for the double post. I was not sure how this worked, and did not think it went through the first time. Can you diresct me to where that answer is? We did not see a reply regarding that.
Thank you for your reply.

Is it possible to make an alert message.

Hi,
Anyone knows if it Is possible to make an alert-message that pops up ( f.e as a little window) on a specific day to remember me of something I have to do that day?
Would be handy.
Is this possible with Tiger or is there a third party application that does the trick?
Thanks in advance.

Try a free widget called quikAlert
http://www.apple.com/downloads/dashboard/business/qwikalert.html
Regards
TD

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

Is it possible to make a copy of the Leopard install DVD?

Is it possible to make a copy of the Leopard install DVD? If so, is there a special way this has to be done? I just found out that we needed to use the Leopard install DVD to recover a complete backup from Time Machine after a recent hard drive failure. We have the family pack of Leopard, so I would like to keep the original at home and send a copy when my daughter goes off to college in case she needs to recover again. Her machine was originally a Tiger MacBook, so those install disks will not work. If it is not possible to copy the DVD, is there a way to create a bootable utility to do a time machine recovery?

This half-solved my problem. I have had no problems creating a backup copy for my intel based computers, but non-intel based computers are problematic; a G5 powermac tower and a G4 Powerbook. Both with super drives for single density burning. Both have Leopard running, installed from an install disc purchased from Apple. However, neither will mount the copy, but intel based computers will. have burnt/burned with both toast 9 and Disc Utility. Discs won't mount and are "spit out" by the drive.
Power Mac G5 OS X: 10.5.4
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (3.0)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Any thoughts?
-Jim

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Top-Level Navigation Bar - Is it possible to make it 3 levels?

Dear Portal Experts,
Could someone please advise if it is possible to make the Top-Level Navigation Bar show more than 2 menu levels? I looked at the document and it said we can only have 1 or 2 levels. But I'm just wondering if there is any way around it. Thanks.

yes you are right .we can set only 1 0r 2 levels but good news is there is a workaround
follow this blog
Tag Libraries: Creating a Hover Menu in SAP NetWeaver Portal
reward points if helpful

Is it possible to make a type cast in TestStand?

I've got the following problem.
I use a receive function which waits for an undefined package. (struct package).
The problem is i can't specify the module with the exaxt package.
Generally in C i define a Pointer and create enough buffer for it. Is it the same in TestStand?
Is it possible to make a type cast?
for example:
i've got these packages
struct packet;
struct data;
the function does not know which structure to receive.
err = receive(buffer,maxlen);
how do i specify the buffer variable?
can i create a type "void" with a String to have enough buffer.
and then to make a type cast, for example "Locals.dataobject = ((data)Locals.buffer)"
any ideas?
thx for help

Unfortunately there is no way to do type-casts in TestStand. What you could do is write a wrapper-dll in C, that has for example two parameters for both possible structs. The dll then takes one of the parameters, does the typecast and passes it on to your original dll.
From TestStand you can pass the struct(or better container in the "TestStand language") you want to use to the accoridng parameter of the wrapper-dll, leaving the other parameter empty or with some default-value.
Hope this helps!
André

How do you sync iCloud (contact, calendar, task) to outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?

I have three device: Macbook Pro (OSX 10.7.5) for work; an iPad and a Blackberry for mobile. I used mail, iCal, and Address Book combine with mobileme (iCloud) to exchange data such as contact, calendar and task from my Mackbook Pro to my iPad but never to Blackberry. The problem is my boss was asking me to change to Outlook 2011 for Mac because some of the email that I sent from Mail did not appear in my client's Blackberry. So how do you sync iCloud (contact, calendar, task) to Outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?
Best regards,
W. Sasongko

More Like This --------------------------------------->

Is it possible to make a morph between loaded 3d-models?

Similar Messages

Maybe you are looking for