Is it possible to migrate for different NLS_NCHAR_CHARACTERSET?

I have 2 EBusiness Suite 12.0.6 and 10.2.0.3.
The source has
NLS_NCHAR_CHARACTERSET: AL16UTF16
NLS_CHARACTERSET......: UTF8
to target instance having charcter set NLS_NCHAR_CHARACTERSET: UTF8
NLS_CHARACTERSET......: UTF8.
Is it possible to extract data from first instance and to load in the second, having different NLS_NCHAR_CHARACTERSET?

Yes. You can. Please make sure that the source and target DB character set are compatible. iSetup validation is very strict and it checks for the extract DB Character set in source and target. However, if you are sure that the charset are compatible, then you can follow the workaround mentioned in the link below to continue loading to target instance.
http://forums.oracle.com/forums/ann.jspa?annID=1192
Refer section "Installed Languages"
Thanks
Mugunthan

Similar Messages

Is it possible to Migrate Live VMs from a Windows 2012 Hyper-V Cluster to a different 2012 R2 Cluster?

At the moment I'm in a bit of dilemma because I know that Windows 2012 supports "Shared Nothing Live Migration" but recently I got to know that this feature is available for stand alone Hyper-V Servers. My Setup is that I have
3 Servers running Windows Server 2012 Hyper-v Failover Cluster and I need to migrate everything to a new cluster running on Windows Server 2012 R2 and offcourse some VMs can't be turned off during migration so I need to do this live during production hours.
Another note is that both clusters will be running on the different LUNs since each cluster has its own CSVs. I need to know if it is possible to migrate such VMs/Roles Live without have any downtime of the VMs/Roles?

Yes, but one exception - live migration works only on "compatible cpu's". There actually is a setting in CPU for forcing compatibility
mode. If that is not set, and you mvoe for example from AMD to Intel, then - this is not possible in live migration, cluster or not.

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

HT3702 Is it possible to have one credit card and two debit cards on my itunes account so that we can use different cards for different purchases?

Is it possible to have a number of cards (say one credit card and two debit cards) to be listed as the payment cards for my itunes account, so that different cards can be used for different purchases? Or can you only have one card registered on itunes at any one time?

So is there any way that three members of a family can share one itunes account but pay for their own purchases, other than inputting their own cards each time they make a purchase.
No, there is no way to do that.
Or if we all have our own individual itune accounts, can we share each other's music, or can you only sync your iphone/ipad/mac, with one itune account at a time?
You can sync content from up to five iTunes Store accounts to any given computer or device. You just will each have to copy the content into your own libraries so you can sync to your devices and have your devices authorized to all applicable accounts.
Regards.

HT4865 When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone and i live in Holland, is this possible or only for the future?

When someone trys to get into my iCloud on à different device, either then on my trusted devices, do i recieve then an email? i have à iMac iPad and iPhone and i live in Holland, is this possible or only for the future?

I want all my devices to be on a password related internet but the double nat on my TC makes weird things happen and slow. I try bridge mode but the internet doesn't work.
You building supplied internet is a cheap service that is without proper routable addresses..
Therefore to use more than one IP you MUST have double NAT.. sorry there is no choice..
Slow that is because you are sharing internet with every other person in the building.. get your own broadband service.
Bridge will not work.. it cannot work because the building only has private IP addressing. And they only give you a single address.
You can put a password on the wireless.. go to the airport utility and put in a password.
Other than that I don't understand what password you expect.
Can I get an explanation of what bridge mode is?
No NAT.. means the TC becomes a dumb Wireless AP and switch.. works fine with a cable modem router.. or any broadband router but useless with your building system.
Can I get suggestions on what I should do to use the TC as a wireless device to spread the same wireless device my apartment is broadcasting?
Double NAT, and set your own wireless names. There is no alternative.. sorry.

Different item arrangements for different folders... possible?

Hi.
I have some folders i need arranged in date added, and others in 'name'.
It seems that when i change it for one it changes it for all.
Is it possible to have different item arrangements for different folders?
Thanks

Yes.

Is it possible to have 2 different library 1 for ipod and 1 for iphone ?

Hi,
I was wondering if it's possible to have 2 different library in itunes 1 for a ipod and 1 for a iphone.
I'm using the same computer as my boyfriend to sync my iphone and his ipod and we absolutly don't listen to the same music so if i could have 1 library for my iphone and 1 for his ipod it would be best of bot world when we sync our iphone/ipod.

Yes. Launch iTunes with the Shift key held down as needed, or use separate user accounts on the computer.
(79774)

Is it possible to set a different privacy time for email?

Hi
I want to be able to get push notifications for my work emails from 8am - 5pm only. but they continue to push through after 5pm.
I have set up my personal gmail account with the gmail app.
My work email is on an exchange server, so any ideas out there to achieve this?
Thanks,

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

Is it possible to have same file size for different dpi?

I changed one.TIFF file (300dpi, 1024X1332) to .jpg files of four different dpi. But when I checked the four result jpg files, I found out that they are all in same file size and quality.( I also have checked the property of the files in the Windows.)
I think more DPI means more data and more file size. Am I wrong?
I use Photoshop CS 5.1(64bit, WINDOWS) - which is part of my Adobe Master Collection CS5.5.
TIFF(300dpi, 1024X1332) ->
1. JPG(72dpi, 1024X1332) : 306KB
2. JPG(108dpi, 1024X1332) : 306KB
3. JPG(144dpi, 1024X1332) : 306KB
4. JPG(600dpi, 1024X1332) : 306KB
I tested a few times more with different files. and same result comes out.(same file size for different dpi)
Thanks in advance.

Yes absolutely. Great observation. PPI does not control the number of pixels, just how big they are.
Now, if you change the PPI in the Image Size dialog with Resample checked.. then, that is a different story. In that case you will be changing the pixel dimension of an image (i.e.,changing the total number of pixels making up the image) while keeping its print size.
In your test files, you will notice all the print sizes are different, because all you were telling Photoshop to do was change the size of the pixels (if or when the image is ever printed), which is really just a bit of metadata of the file.

It is Possible to Migrate Local User Profile to Roaming Profile Using USMT?

Dear All,
1st, I'm following guide at http://support.microsoft.com/kb/142682 to copy user profiles to another user, but the problem is the 'Copy to' button is not active (grey). I try
using 3rd party tools, still no change.
2nd, I try to transfer local profile on the same machine and different user using Windows Easy Transfer, it's work and all of data has been restore to a new user. But not all App Settings is restored, when I open Outlook 2010 and Windows
Live Mail, there's need to enter password again. That is not problem for me.
3rd, After migrate/transfer (2nd step) I want to migrate from local profile to roaming profile, but user profile setting on local profile is not copied to roaming profile, such as Email setting need to create new account but all data is
not problem, because I have already configure on ADUC and GPMC.
My question is:
1. How to copy or move all Application settings on AppData Local folder to roaming profile?
2. How about USMT, it is possible to migrate user profile settings from local to roaming? if is the best tools, how to do this?
Please, advice...
Thanks,
Hendra

First, I dont understand why you're using the copy profile method. I'll make the assumption that you have a domain user account that you you need it's files and settings moving to another machine.
In that scenario then there's a simple guide here:
Migrate User Accounts
For Roaming Profiles and Redirected folders; you can follow the
Infrastructure Planning and Design (IPD) Guide for Windows User State Virtualization (USV).
It sounds like a mouthfull but it actually makes the whole process easy. There's also a video
here.
/Andrew
Blog: http://scriptimus.wordpress.com

Uploading data in MM01 for different material types

Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.

See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*&   I N B O U N D V I A   A B A P : Batch input Session method     *
*&   Development ID: IM_DD_306_LJP                                   *
*&   Report        : ZJPMUIM306                                      *
*&   The Purpose of the Object is to interface Create Input Record   *
*&   for SAP Migration from the Material master of BPCS All the      *
*&   information received at BPCS is collected into a single record. *
*&   By using session method upload data from file ,one item is
*&   created for one record                                          *
*&   Change Log:                                                     *
*&   Init       Who              Date         Text                   *
*& MALIKDH1   Seshu Reddy    26-07-2003   Initial Version           *
                         Constants                                   *
CONSTANTS:c_vkorg(4) type c value 'JP20',        " Sales Organization
          c_vtweg(2) type c value 'TR' ,         " Distribution Channel
          c_werks(4) Type c value 'JP01' ,       " Plant
          c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
          c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
          c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
          c_seq_code(2) VALUE 'Z1',              " Sequential Code
          c_keep(1) TYPE c VALUE 'X',           " Keep
          c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
          c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
          c_blank(1) VALUE ' ',                   " Blank
          c_intls(1) VALUE 'N'.                  " Logistic Status
              Variables                                      *
DATA: g_flag1(1), " Variable to hold
      g_flag(1),   " Variable to hold
      g_file LIKE rlgrap-filename VALUE
     'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
       Internal tables/ Work area                           *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
       text(1000),
       END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
      matnr(15) TYPE c, " material no
      dosage(40) TYPE c, " Dosage form(Local)
      appearance(40) TYPE c, " Appearance
      idcode(6) TYPE c,     " Identification Code
      prostformno(10) TYPE c, "SOP
      weitab(7) TYPE c,    " Weight/tablet
      uom1(2) TYPE c,     " UOM of Carton
      uom2(2) TYPE c,     " UOM of Case
      carsize(14) TYPE c, " Carton size
      cassize(14) TYPE c, " Case size
      rupqty(11) TYPE c, " Round up
      abvname(3) TYPE c, " Product short name
      END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
      matnr LIKE marc-matnr, " Material number
      zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
      zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
      zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
      zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
      zzjp_wei_tab(10) type c , " Weight/tablet
      zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
      zzjp_itf LIKE marc-zzjp_itf, " ITF code
      zzjp_car(2) type c, " UOM of Carton
      zzjp_cas(2) type c, " UOM of Case
      zzjp_car_size(11) type c," Carton size
      zzjp_cas_size(11) type c, " Case size
      zzjp_rupqty(11) type c, " Round up
      zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
      zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
      zzjp_re2 LIKE marc-zzjp_re2, "Report type
      zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
      zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
      zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
      zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
      zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
      zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
      zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
      END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
      matnr LIKE mara-matnr, " material Number
      vpsta LIKE mara-vpsta, " Maintenance status of complete material
      pstat like mara-pstat, " Maintenance status
      END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
        INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
      flag1 type c,
      anzd70 TYPE i,
      field1(20) type c,
      field2(20) type c,
      field3(20) type c,
      field4(20) type c,
      count(2) TYPE c,
      END OF w_data.
            Main Processing                           *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
         vpsta
         pstat
    FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*&      Form F_VIEW_LIST                                             *
         Routine to used for Calling the function module            *
          Selection_views_find                                      *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
       EXPORTING
            bildsequenz     = c_seq_code
            pflegestatus    = c_viewlist
       TABLES
            bildtab         = t_bildtab
       EXCEPTIONS
            call_wrong      = 1
            empty_selection = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_VIEW_LIST
*&      Form f612_view_sort                                          *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
    IF t_bildtab_dup-pstat CA t_mara-pstat.
      w_data-anzd70 = w_data-anzd70 + 1.
      IF t_bildtab_dup-kzanz IS INITIAL.
        t_bildtab_dup-kzanz = 'X'.
        w_data-flag1 = 'X'.
        MODIFY t_bildtab_dup.
      ENDIF.
    ELSE.
      IF NOT t_bildtab_dup-kzanz IS INITIAL.
        CLEAR t_bildtab_dup-kzanz.
        w_data-flag1 = 'X'.
        MODIFY t_bildtab_dup.
      ENDIF.
    ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
    SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
    WRITE sy-tabix TO w_data-count.
    w_data-count = w_data-count + 2.
    IF w_data-anzd70 > 18.
      w_data-count = w_data-count - 18.
    ENDIF.
    CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
    CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
    WRITE sy-tabix TO w_data-count.
    IF w_data-anzd70 > 18.
          w_data-count = w_data-count + 2.
      w_data-count = w_data-count - 18.
    ENDIF.
    CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
    CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM.                    " f612_view_sort
*&      Form f_uplaod_data                                           *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            filename                = g_file
            filetype                = 'DAT'
       TABLES
            data_tab                = t_delim
       EXCEPTIONS
            conversion_error        = 1
            file_open_error         = 2
            file_read_error         = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            OTHERS                  = 10.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
    LOOP AT t_delim.
      SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
                                     t_bpcs-dosage
                                     t_bpcs-appearance
                                     t_bpcs-idcode
                                     t_bpcs-prostformno
                                     t_bpcs-weitab
                                     t_bpcs-uom1
                                     t_bpcs-uom2
                                     t_bpcs-carsize
                                     t_bpcs-cassize
                                     t_bpcs-rupqty
                                     t_bpcs-abvname.
      APPEND t_bpcs.
    ENDLOOP.
ENDIF.
ENDFORM.                    " f_uplaod_data
*&      Form F_BDC_OPEN
      Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
            client              = sy-mandt
            group               = c_group
            keep                = c_keep
            user                = sy-uname
       EXCEPTIONS
            client_invalid      = 1
            destination_invalid = 2
            group_invalid       = 3
            group_is_locked     = 4
            holddate_invalid    = 5
            internal_error      = 6
            queue_error         = 7
            running             = 8
            system_lock_error   = 9
            user_invalid        = 10
            OTHERS              = 11.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM.                    " F_BDC_OPEN
*&      Form F_PROCESS_BDC
      Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
    PERFORM f612_view_sort.
    PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
    PERFORM f_bdc_field USING 'BDC_CURSOR'
                                  'RMMG1-MATNR'.
    PERFORM f_bdc_field USING 'BDC_OKCODE'
                                  '=AUSW'.
    PERFORM f_bdc_field USING 'RMMG1-MATNR'
                                  t_mdata-matnr.
    PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
    PERFORM f_bdc_field USING 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
    IF w_data-anzd70 > 18.
      PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '=P+'.
      PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0070'.
      PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
    ENDIF.
reading the t_bildtab internal table
    READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
    IF t_bildtab_dup-kzanz = 'X'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    w_data-field1.
      PERFORM f_bdc_field       USING w_data-field2 'X'.
      g_flag = 'X'.
    ENDIF.
reading the t_bildtab internal table
    READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
    IF sy-subrc EQ 0.
      g_flag = 'X'.
    ENDIF.
    IF t_bildtab_dup-kzanz = 'X'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    w_data-field3.
      PERFORM f_bdc_field       USING w_data-field4 'X'.
      g_flag1 = 'X'.
    ENDIF.
    IF g_flag = 'X' AND g_flag1 = 'X'.
      PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
      PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                    'RMMG1-VTWEG'.
      PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                    '=ENTR'.
      PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                    c_werks.
      PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                    c_vkorg.
      PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                    c_vtweg.
      CLEAR g_flag.
      CLEAR g_flag1.
    ELSE.
      IF g_flag = 'X'.
        PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
        PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                    c_werks.
        PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
      ELSE.
        IF g_flag1 = 'X'.
          PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '0080'.
          PERFORM f_bdc_field       USING 'BDC_CURSOR'
                                        'RMMG1-VTWEG'.
          PERFORM f_bdc_field       USING 'RMMG1-WERKS'
                                      c_werks.
          PERFORM f_bdc_field       USING 'RMMG1-VKORG'
                                        c_vkorg.
          PERFORM f_bdc_field       USING 'RMMG1-VTWEG'
                                        c_vtweg.
          PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                         '=ENTR'.
        ENDIF.
      ENDIF.
    ENDIF.
*Processing of SCM View
    PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
    PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_DOS_FRM'
                                  t_mdata-zzjp_dos_frm.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_APRN'
                                  t_mdata-zzjp_aprn.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CON_ID'
                                  t_mdata-zzjp_con_id.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_NYU_SOP'
                                  t_mdata-zzjp_nyu_sop.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_WEI_TAB'
                                  t_mdata-zzjp_wei_tab.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR'
                                  t_mdata-zzjp_car.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS'
                                  t_mdata-zzjp_cas.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAR_SIZE'
                                  t_mdata-ZZJP_CAR_SIZE.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_CAS_SIZE'
                                  t_mdata-ZZJP_CAS_SIZE.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RUPQTY'
                                   t_mdata-ZZJP_RUPQTY.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_BIO'
                                  t_mdata-zzjp_bio.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_ITF'
                                  t_mdata-zzjp_itf.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_INIT_LS'
                                  t_mdata-zzjp_init_ls.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE1'
                                  t_mdata-zzjp_re1.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE2'
                                  t_mdata-zzjp_re2.
    PERFORM f_bdc_field       USING 'MARC-ZZJP_RE3'
                                  t_mdata-zzjp_re3.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
*Processing of SD View
    PERFORM f_bdc_dynpro      USING 'SAPLMGMM' '4000'.
    PERFORM f_bdc_field       USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_PRO_ID'
                                  t_mdata-zzjp_pro_id.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_BU_ID'
                                  t_mdata-zzjp_bu_id.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_NAME'
                                  t_mdata-zzjp_abv_name.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID1'
                                  t_mdata-zzjp_abv_id1.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_ABV_ID2'
                                  t_mdata-zzjp_abv_id2.
    PERFORM f_bdc_field       USING 'MVKE-ZZJP_SPL_ID'
                                  t_mdata-zzjp_spl_id.
    PERFORM f_bdc_field      USING 'BDC_OKCODE' '/00'.
    PERFORM f_bdc_dynpro      USING 'SAPLSPO1' '0300'.
    PERFORM f_bdc_field       USING 'BDC_OKCODE'
                                  '=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM.                    " F_PROCESS_BDC
*&      Form f_bdc_dynpro
p_prog is the program name to which data is passed                *
p_dyno is the screen number to which the data is passed
    Routine for populating the BDCDATA structure with the
    Screen related information
FORM f_bdc_dynpro USING    p_prog
                           p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro   = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " F_bdc_dynpro
*&      Form F_BDC_FIELD
      p_fnam is the field name to which value is passed
      p_fval is the field value which is passed
   p_fnam is the field name to which value is passed
   p_fval is the field value which is passed
FORM f_bdc_field USING    p_fnam
                          p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM.                    " F_bdc_field
*&      Form F_PROCESS_DATA                                          *
     Routine to used for moving data from T_bpcs internal table to *
     t_mdata Internal Table                                         *
FORM f_process_data.
LOOP AT t_bpcs.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              input = t_bpcs-matnr
         IMPORTING
              output = t_mdata-matnr.
    MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
    MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
    MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
    MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
    MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
    MOVE c_blank TO t_mdata-zzjp_bio.
    MOVE c_blank TO t_mdata-zzjp_itf.
    MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
    MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
    MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
    MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
    MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
    MOVE c_intls TO t_mdata-zzjp_init_ls.
    MOVE c_blank TO t_mdata-zzjp_re1.
    MOVE c_blank TO t_mdata-zzjp_re2.
    MOVE c_blank TO t_mdata-zzjp_re3.
    MOVE c_blank TO t_mdata-zzjp_pro_id.
    MOVE c_blank TO t_mdata-zzjp_bu_id.
    MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
    MOVE c_blank TO t_mdata-zzjp_abv_id1.
    MOVE c_blank TO t_mdata-zzjp_abv_id2.
    MOVE c_blank TO t_mdata-zzjp_spl_id.
    APPEND t_mdata.
ENDLOOP.
ENDFORM.                    " F_PROCESS_DATA
*&      Form f_bdc_close
      Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
            not_open    = 1
            queue_error = 2
            OTHERS      = 3.
IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " f_close_group
*&      Form f_bdc_insert
     routine to input batch data into the Transaction MM02 from the
     session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
         EXPORTING
              tcode            = c_tcode
         TABLES
              dynprotab        = t_bdcdata
         EXCEPTIONS
              internal_error   = 1
              not_open         = 2
              queue_error      = 3
              tcode_invalid    = 4
              printing_invalid = 5
              posting_invalid = 6
              OTHERS           = 7.
    IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu

Is it possible to migrate from Hyperion essbase ver 6 to Hyperion Ver 11?

Hi Hyperion geeks,
is it possible that Migrate from Hyperion essbase ver 6 to Hyperion Ver 11. if yes then pls let me know how we can do it????
reg,
abhishek

Hi,
We're finishing our migration from 6.2 to 11.1.1.3.
Of course won't recommend to migrate directly... they will recommend going through different steps (v7, V9...) => useless I think.
Here what we did :
- Installed v11 (new server)
- copied objects from v6 to v11, tested and validated objects under v11
- for .sec, recreated the app/databases first then copied the v6 .sec on v11 server. Of course your server have to be installed with native securities then you may push to shared services.
- if you don't care about changing password you could handle it with maxl extracts or secman (but I had issues with secman).
Finally it's just like any migration

Is it possible to migrate from snow leopard to lion?

My son just received his new Macbook Pro (15 "); he is running Snow Leopard on his 2008 model Macbook Pro. Is it possible to migrate from Snow Leopard to Lion using the setup assistant or does he have to upgrade to Lion first?

John Boley wrote:
CS and others in his college work and I have read elsewhere it is best to reinstall those programs.
True. 10.7 is a different animal and most all software has to be installed from fresh sources preferred. (cleans things up too)
There is CS6 now for 10.7, just released.
Check for comptability here, then make the decision if it's worth migrating the programs or not.
http://roaringapps.com/apps:table
Will the setup assistant "automatically" try to transfer everything?
I don't know, I never used it.
Too hard core old school to use Apple's gimmicky and problematic software.
I rather clean install a new machine, only manually transfering files from the old one, cleaner setup that way and no hidden surprises or performance issues.

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
I tried using flickr and powerpoint as a work around but no luck. I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file. I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set. It still displays everything, pics and the wmv file at the default 3 sec.
I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

Welcome to the Apple Community.
No that's not possible.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

Is it possible to migrate for different NLS_NCHAR_CHARACTERSET?

Similar Messages

Maybe you are looking for