Is it possible to modify SQL DB tables using TUXEDO services???

Hi,
I dont know how to use to resource manager to connect to the SQL Server Database
nor have I ever worked with SQL Servers.
But you could possibly try doing the following.
In the Tuxedo Server / Service, using Pro*C, you can use the
EXEC SQL CONNECT :userid IDENTIFIED BY :password statment.
This should open the connection to the SQL Server DB. and then using the regular
Pro*C SQL Statement you should be able to do modify the tables.
But please be sure that the user id you use has the Insert/Update/Delete rights
on the tables that you access.
I hope this helps.
Regards
Amit

Similar Messages

How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
Put the Data Flow Task within the Foreach Loop Container
Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
And that's when I run into trouble...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
Thanks for your review and am hoping and praying for a reply and solution.

Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to select data from 3rd row of Excel to insert into Sql server table using ssis

Hi,
Iam having Excel files with headers in first two rows , i want two skip that two rows and select data from 3rd row to insert into Sql Server table using ssis.3rd row is having column names.

CUSTOMER DETAILS
REGION
COL1 COL2 COL3 COL4 COL5 COL6 COL7
COL8 COL9 COL10 COL11
1 XXX yyyy zzzz
2 XXX yyyy zzzzz
3 XXX yyyy zzzzz
4 XXX yyyy zzzzz
First two rows having cells merged and with headings in excel , i want two skip the first two rows and select the data from 3rd row and insert into sql server using ssis
Set range within Excel command as per below
See
http://www.joellipman.com/articles/microsoft/sql-server/ssis/646-ssis-skip-rows-in-excel-source-file.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to Ftp a Blob attachment in a table using osb service

How to Ftp a Blob attachment in a table using osb service
I tried with DBadapter select it does not work ... For blob objects cant use select throws error as expected number got blob
can call a stored procedure to write the file to some directory but that file will not be created with the same name of the file as stored in DB .. need to hard code the filename in utl file or if we pass a variable to get the name of the attachment file we have to use select query in cursor which throws error like above in step 2
Can some body tell me how to get the blob attachment with the same name as it is stored in DB table
Edited by: user13745573 on Jan 31, 2011 4:35 AM

Hi,
I want to send an attachment through email.
But I want to pick the file from say local drive then how can i specify the path of the file in file name.
Also, i dont want ot append the conent from payload to the file. i wanted to sendthe file as is.
<ema:attachment>
<ema:name></ema:name>
<ema:type>text/plain</ema:type>
<ema:content/>
</ema:attachment>
Please help.

Is it possible to load multiple .xlsx files into a SQL Server Table using SSIS and a Foreach Loop Container when each Excel spreadsheet is comprised of two different worksheets

So we have an Invoice .xlsx File from a 3rd party vendor. It contains two worksheets..."Enrolled" and "Engaged". The data and data columns in each worksheet is different. Is it possible to loop through multiple .xlsx files using SSIS
and a Foreach Loop Container for each spreadsheet, and then another Foreach Loop Container to control each worksheet, and pump the Excel data into a SQL Server Table first for "Enrolled" and then for "Engaged"? How can I control the Foreach
Loop Container in SSIS to process ONLY the "Enrolled" worksheet first? And then the "Engaged" worksheet next?
I know I have multiples out here and I apologize for that...but right now it seems as though I take three steps forward and then two back.
Any help would be GREATLY appreciated!
Thanks in advance!

If the structure of the Excel sheets does not change from file to file then you can by having one ForEach Loop processing always the "Enrolled" sheet and another always the "Engaged" this is doable because the Excel OLEDB connector allows
to pick individual sheets, it is problematic therefore when sheet names themselves change.
MSDN has an example: https://msdn.microsoft.com/en-ca/library/ms345182.aspx
Arthur
MyBlog
Twitter

How to load a comma seprated text file which contain address in to sql server table using ssis package

Hi,
I want to load a file which is comma separated and contain address .Problem is that address its self comma seprated so how do I differenciate whether comma used for column seprator or it used in address.
for eg.
One person having address like
"c/o AB corp,156 cross lane,USA"
Thanks.....

Hi SR_MCTS,
Based on your description, you want to distinguish a comma is used for column separator or used in address column in a text file, then load the data from the text file to SQL Server table.
As per my understanding, if you can replace the comma column separator to another delimiter like semicolon (;), just do it. Then we can select Semicolon {;} as Column delimiter for the Flat File Connection Manager. Or ensure all columns are enclosed in double
quotes ("). Then we can set the double quotes (") as Text qualifier for the Flat File Connection Manager, and the commas will be loaded as part of the string fields.
If you can't have that done, because computers don't know the context of the data, you would have to come up with some kind of rules that decides when a comma represents a delimiter, and when it is just part of the text. I think a custom script component
would be necessary to pre-process the data, identify where a comma is part of an address, and then treat that as one field.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Is it possible to add records to tables using Enterprise Manager?

Can we add records to tables using Oracle Enterprise Manager web interface instead of the sqlplus commands ? if not, is there any easy way to insert data into table using a graphical interface?

You may consider using iSQL*Plus.
Check http://www.oracle.com/technology/obe/obe10gdb/install/isqlplus/isqlplus.htm
Thanks,

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

Push Data in SAP Tables using Data Services

Hi
Lets suppose that I have used Data Services 4.0 to pull data from KNA1 table , and loaded into the MDM where data cleansing , enrichment and deduplication has been done, and then MDM writes to a file.
How can Data Services then push the cleansed data back into the SAP table ( KNA1) ? [or it cannot be done due to multiple reasons ]
Rishi

Hi
To update an SAP table, import the metadata for the relevant BAPI or IDoc and call it via a query transform.
M

Loading standard R/3 Hierarchy in BO Database Table using Data Services

Hello,
i'm trying to load Cost Center Hierarchy from R/3 to BO database table using SAP BO Dataservices 4.0
i have replicated the Data Flow and Abap Data Flow explained in SAP documentatio (SAP BusinessObjects Data Services 4-0 SP1 Supplement for SAP) and http://wiki.sdn.sap.com/wiki/display/BOBJ/ReadingR3Hierarchies
but it doesn't work
i get errors like:
[Merge:Merge]
Length <64> for Tran Merge input ABAP_DF_Hierarchy_Leaf_Values column <PARENT_DESC> does not match the length <30> of Tran Merge input ABAP_DF_Hierarchy_Extraction column <PARENT_ID>. The matching columns of Merge transform must have the same data type length. (BODI-1111062)
[Merge:Merge]
Length <30> for Tran Merge input ABAP_DF_Hierarchy_Extraction column <PARENT_ID> does not match the length <64> of Transform Merge output column <PARENT_DESC>. The matching columns of Merge transform must have the same data type length. (BODI-1111062)
thanks for your support
Bilal

It appears that the structures of the two Data Transports going into the Merge Transform don't have the columns in the same order. One of the Data Transports has PARENT_DESC listed before PARENT_ID and the other Data Transport has PARENT_ID before PARENT_DESC.
Basically, you need to change the order of the columns in one of the Data Transports so that it structurally matches the other Data Transport that it's being merged (UNIONed) with.

Error while connecting to SQL Server 2000 using Heteregenous Services 11g

Hope this is the right thread to post on! We have been given the challenge of connecting to and reading data from a SQL Server 2000 database.
Our Infrastructure guys have set up the network access.
The SQL Server DB is set to windows NT Authentication only (N.B. NOT Mixed Mode) as there is an application running against the DB locally that will not run under Mixed Mode.
Our Oracle partner has download and installed the 11g Heteregenous Services. all works fine until the point we try to create the DBLink and then connect to the SQL Server DB when we get:
SQL> CREATE DATABASE LINK infoteam1.sco.infoteam.co.uk CONNECT TO "sco.infoteam.co.uk/infoteam" IDENTIFIED BY "########" USING 'dg4msql';
Database link created.
SQL> select * from "systables"@infoteam1.sco.infoteam.co.uk;
select * from "systables"@infoteam1.sco.infoteam.co.uk
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver][SQL Server]Login failed for user
'sco.infoteam.co.uk/infoteam'. Reason: Not associated with a trusted SQL Server
connection.[Oracle][ODBC SQL Server Driver]Invalid connection string attribute
ORA-02063: preceding 2 lines from INFOTEAM1.SCO.INFOTEAM.CO.UK
The question is can we (and if so how)?) connect to the SQL Server using an NT Windows Authorised account?
Jeremy

Hi,
Please look at MOS note
ORA-28500: Generic connectivity using ODBC DSN over mapped drive fails [ID 105210.1]
Ora-28500 with Ms Sqlserver - Not associated with a trusted SQL Server connection [ID 333775.1]
Regards,
Edited by: gjilevski1 on Aug 31, 2010 8:23 AM

Is it possible to customize the ARUN table (J_3ABDBS) and delivery creation program (transaction VL04) in SAP?

I am a student, pursuing MBA and currently doing internship with a big fashion and lifestyle company in India. I am stuck at a place where i need help.
We are planning to give customer the control over the time of delivery of their orders as per their convenience. For that I am exploring the possibility of modifying the ARUN table in such a way that an extra column is added into the ARUN table. this field will contain a flag value (1/0) where '0' will indicate that the customer wants to block delivery for the specific items.
at the time of delivery creation, transaction VL04 should check this flag value for every item. So when we try to create delivery for a whole order in one go, the delivery for the items with '0' flag value shouldn't be created.
basically, my whole purpose is to enable our SAP system to create delivery on item level instead of on order level.
Ques:
1. Is it at all possible to do what i am thinking of?
2. has any company customised the ARUN table and delivery creation program before?
3. If we go ahead with this customisation in-house, will the SAP pull back the maintenance support on account of tempering with base programs?
4. Also, please suggest other ways to do what i am trying to do?

you can use the Tables SRRELROLES and IDOCREL
if it is inbound delivery the use the business object BUS2015(outbound use LIKP)
first get the ROLEID using the Delivery number as Objectkey(business obecjt BUS2015/LIK) from the SRRELROLES,
then pass the ROLEID to the table IDOCREL to ROLE_A , get the ROLE_B,
use this ROLE_B supply to ROLEID of SRRELROLES table(business object as IDOC, )
get the objkey which is nothing But IDOC.

Neet to locate the shared services native users in SQL server tables

Hi All,
We are using Hyperion Shared services to provision users to essbase, planning and HFM(all version 9.3.1). And we are using SQL server 2000 as the database. We created few native users in shared services and provisioned them to HFM, Essbase and Planning. Now we need to find those native users' information in the underlying SQL tables. I followed the documentation and sync-ed the native to relational tables using shared services, but I cannot see the user info for all the users I have created. I would appreciate if you can suggest me how to find the shared services users' and roles information in SQL tables (in the back end).
Legards,
Leo

Hi,
There are a number of free Ldap browsers that you can download, e.g.
http://www.mcs.anl.gov/~gawor/ldap/demo.html
http://www.ldapbrowser.com/download.htm
Once you have installed then ldap browser you just need to point it to your Openldap
Host :- machine with OpenLdap running
Port :- 58089
Base :- dc=css,dc=hyperion,dc=com
User DN :- CN=root,dc=css,dc=hyperion,dc=com
And just the root password which you can change in HSS in 9.3
Cheers
John
http://john-goodwin.blogspot.com/

Generate SQL Insert Statement using EXPORTED dmp file

Dear DBAs,
Kindly inform me that is it possible to generate SQL script file using the exported file dmp,
I am looking for some option in import utility that generates script without import any rows in the database
Secondly is there any other way to check the validity of exported dmp file data validity without importing it back into the database.
Regards,
Asif

Hi Satish,
Yes you are correct the insert into statements won't be avaliable using either the indexfile or the show parameter.I had given these two options as per his 1st post requirement where he had mentioned
>
it possible to generate SQL script file using the exported file dmp,I am looking for some option in import utility that generates script without import any rows in the database
>
So, i thought he needed to see whats all objects are in the .dmp
Apologies for my 2nd post.
Anand

SQL * Plus commands using JDBC

Hi,
Is it possible to run SQL * Plus commands using JDBC?
Like Describe mytable , @mysql.sql etc....
Pl. let me know any hints or way to handle it..
Regards,
Kavi

like masuda1967 said, and you have MetaData objects for ResultSets as well.
@something.sql you can call using CallableStatement objects, look it up in jdbc docs....

Is it possible to modify SQL DB tables using TUXEDO services???

Similar Messages

Maybe you are looking for