Is it possible to modify the timeout of the userID on my active directory domain when off network?

My work Macbook Pro is using a domain account from my office.  When I travel and the domain controller is not reachable it takes 30 to 60 secs longer to log into my system because it has to wait for the active directory domain controller search to timeout before it will use cached credentials (i.e. a mobile account).  Does anyone know how to modify my system settings to reduce the timeout or even eliminate the delay all together?  I am running the latest version of Yosemite. 
Thanks,
Mike

Here is the modified VI, saved in LabVIEW 2012. Follow these steps to patch your system:
1. Close LabVIEW 2012.
2. Backup the following file: LabVIEW 2012\resource\Framework\Providers\VILibrary\libFra​me_OpenPageRef.vi
3. Replace it with the version attached to this post.
4. Restart LabVIEW 2012.
Now you should no longer experience the 30 second timeout when the class property page loads. I set the timeout to "-1", so it should wait as long as necessary to open the page.
Note that if you ever repair or reinstall LabVIEW 2012, you'll need to patch this file again. Also, I wouldn't try patching any version other than 2012, since there may be other changes made to this VI across LabVIEW upgrades.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
libFrame_OpenPageRef.vi ‏24 KB

Similar Messages

  • How to modify the Account options in Active directory?

    I want to modify some user account options in my active directory through java. Such as "user must change the password on next logon" & "account expires" the user has to change the password by redirecting to the change password page after login.
    if account expires or the user must change the password on next logon functionality in the account options is enabled, i couldn't able to bind that user. this is because i am unable to authenticate the same user with the password in the login page. it shows that User is not authenticated & i got data 773 error which means that i want to redirect to the change password page.
    During the change password, i cannot able to change the password due to unsuccessfull bind. since the user is not authenticated with the temporary password.
    please suggest me solutions.
    Thanks in advance.

    You've come across the chicken & egg problem.
    A user's password has expired and they must change their password at the next logon, however in order to change their password over LDAP, they must perform a successful bind !
    Unfortunatey LDAP is not an authentication protocol.
    You will have to find some other way for the user to change their password, perhaps by using Kerberos & kpasswd.
    If the user's account has expired, there isin't anything a user can do, except to have an adminstrator re-enable the account by changing the account expiration date.

  • Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Is it possible to have the Firefox Icon in windows' taskbar flashes when any of my app tab changes?

    Not possible to configure this in Adobe Reader.

  • It is possible to change the Inhibit signal to active high (7344 controller)?

    Normal the controller 7344 generate an Inhibit signal active low. We can receive this signal from the UMI 7764, and send it to the motor drive.
    We have a Nanomotion drive type AB-5. For that type of drive the is the Enable signal that is active low. It is possible that this generate a problem of dialogue between the controller and the drive? I means that it is possible that a signal that the controller explicite like inhibit is interpretated by the drive like enable and vice versa. If it is true, how is possible to swap the inhibit signal to active high?

    You can set the polarity of the inhibit signal in MAX. Select the Axis Settings of your 7344 settings. To the lower right hand side there are the options for the inhibit output polarity.
    Best regards,
    Jochen Klier
    Applications Engineering Group Leader
    National Instruments Germany GmbH

  • Is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?

    is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?
    like in windows a search-funtion?
    I have found one VI, it list the data in the directory self (the pfad from the data as string) but not the data in an under-directory. it also has the funktion to list me the under-directory but it do not list the complite data in every directory
    can somebody help me pleace
    THX

    Hallo Chef,
    unter LV8.21 befindet sich die beschriebene Funktion in der File-Palette:
    Dummerweise gibt es die Funktion in LV8 noch nicht... (Deshalb ist es immer eine gute Idee zu sagen, mit welcher LV-Verson man arbeitet!)
    Du kannst aber unter vi.lib/utility/RecursiveDirList.llb nachschauen, wie es gemacht wird
    Message Edited by GerdW on 08-17-2007 11:17 AM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    AdvFileFunc.png ‏10 KB

  • Modify the from header depending of destination domain in Exchange 2007

    Hello.
    I have an Exchange 2007 organization. One edge and 2 mailbox-cas-hub servers. I want to modify the "From" header depending of destination domain.
    For example, if the destination domain is @example.com and the sender is
    [email protected], the new sender must be changed to
    [email protected] . The user1 has both email address added as smtp address and @newdomain.com was set as primary address to respond and receive emails.
    I have tried with transport rule but I cannot create it, because I received an error when I want to modify the "From" value. The command and error message are:
    Command:
    New-TransportRule -Name 'Test' -Comments
    '' -Priority '0' -Enabled $false -From
    '[email protected]' -SentToScope
    'NotInOrganization' -RecipientAddressContainsWords
    '@example.com'
    -SetHeaderName 'From' -SetHeaderValue
    '[email protected]'
    Error:
    You can't set header 'From' with value
    '[email protected]'
    I have tried without "@" and only with the username, but I got the same error.
    I have been the New-AddressRewriteEntry option, but on this command I cannot set a specific destination domain, only it can set an internaldomain and externaldomain parameters.
    I would like to resolve this issue with Exchange 2007 tools or commands, but I guess this requirement can be done with a third-party tool, anyone knows any?
    Thanks and regards.

    I think what you're trying to do is pretty unusual, at least for Exchange. :-)
    I don't know of anything that would run on Exchange that would be able to do that, but I think you can do it with something like Postfix.
    http://www.108.bz/posts/it/conditional-address-rewriting-with-postfix/
    http://comments.gmane.org/gmane.mail.postfix.user/228099
    --- Rich Matheisen MCSE&I, Exchange MVP

  • Is it possible to switch from Office 365 online user management to Active Directory after Exchange online migration?

    If we utilize the Cutover method to migrate from on-premise Exchange (2007) to Office 365, which to my understanding will hand over user management/authentication to Office 365 online during the process, is possible to later switch from Office 365 user management
    to Active Directory (synced to a future local domain, or even possibly via AD federation single sign-on)? If so, how difficult is this process and is there any documentation available?
    Asking this because the organization  I'm working for plans to upgrade (re-do actually) its entire infrastructure. There will be a completely brand new domain/AD set up that's totally unrelated to the old one. At the same time, we also plan to migrate
    all emails (previously hosted locally on Exchange 2007) to Office 365 and get rid of local exchange. Now because we will set up new domain, we do not want to carry over the older AD to the cloud, hence we will not use the "Staged Migration". 
    So the plan is to to use "Cutover" migration first, which means all authentications will become Office 365 managed. That's fine for now. But later, after we set up our new domain and AD controller etc, we'd like to have Exchange Online switch back
    to syncing with our new on-premise AD. We'd also like to consider the AD Federation Services if it's not too complicated to set up.
    Your advice on this would be greatly appreciated!

    In principle, you cannot sync back from the cloud AD to the on-prem, yet. But you can take advantage of the soft-matching mechanism once you have the new AD in place:
    http://support.microsoft.com/kb/2641663
    Be careful though, as the moment you turn on Dirsync, all the matching users in the cloud will have their attributes overwritten. A very good idea is to do an 'export' of the cloud AD first, using the WAAD module for PowerShell and the Get-MsolUser cmdlets,
    which you can then use to compare or import data in the new on-prem AD. Some links:
    http://technet.microsoft.com/en-us/library/hh974317.aspx
    http://msdn.microsoft.com/en-us/library/azure/dn194133.aspx

  • SCVMM 2008 R2 - "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS)."

    I know this question has been asked before, but never for R2, that I can tell, and the posted fixes aren't working. I have just installed SCVMM 2008 R2 on a Windows Server 2008 R2 server, using a remote SQL 2008 SP1 database. When I attempt to connect to SCVMM, I get the following error:
    "The SQL Server service account does not have permission to access Active Directory Domain Services (AD DS).
    Ensure that the SQL Server service is running under a domain account or a computer account that has permission to access AD DS. For more information, see "Some applications and APIs require access to authorization information on account objects" in the Microsoft Knowledge Base at http://go.microsoft.com/fwlink/?LinkId=121054.
    ID: 2607"
    What I've seen online is that this is usually becuase the domain account SCVMM is running as does not have the proper permissions on the SQL database. Here's what I've confirmed:
    1) My SCVMM service account is a local admin on the SCVMM server
    2) My SCVMM service account is a dbowner on the SCVMM database in SQL
    3) My SQL service account is a dbowner on the SCVMM database in SQL
    4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still "doesn't have access to AD DS," which is obviously untrue)
    5) Neither service account is locked out
    Has anyone run in to this? It says in Technet that remote SQL 2008 is supported, as long as the SQL management studio is installed to the SCVMM server, and I installed and patched before I began the SCVMM installation. I just don't know what else to try - I have no errors in event logs, no issues during the installation itself...
    Andrew Topp

    That answer was very unhelpful fr33m4n. The individual mentions that they've received the error that points to the KB article. I currently receive the same error -- there seems to be no resolution. I've run the Microsoft VBS script to add TAUG to the WAAG
    as suggested by 331951, and that made absolutely no difference.
    1) My SCVMM service account is a local admin on the SCVMM server
    2) My SCVMM service account is a dbowner on the SCVMM database in SQL
    3) My SQL service account is a dbowner on the SCVMM database in SQL
    4) My SQL service account is a domain user (even made it a domain admin, just in case, and it still
    "doesn't have access to AD DS," which is obviously untrue)
    The user is also a member of WAAG, the machines have delegated authority to each other. Is there any other solution?

  • Windows 2012 R2 Active Directory Domain Services and Remote Desktop services Role on the same server.

    Findings: 
    Currently, Windows 2012 R2   AD DS role and RDS With Broker services can only seem to coexist properly in a new domain not an existing domain. Any attempt to add to an existing domain causes internal database user access denied issues and any attempt to
    adjust rights and circumvent is dubious at best.
    The escalation technician said it best. Out of 50 clients that want to do this, they end up not being able to help 5 right off the bat for whatever reason. As for the other 40 they might be able to help by running reports, adjusting rights and trying to add
    the roles until it works.  This can end up being a 20 day process. Basically they are playing whack-a-mole with user rights and permissions until something sticks.
    We tried creating an OU where any other domain policies would not be inherited to see if that was the issue, a fresh install with different sequence of adding the Roles, no effect.
    Given the errors I witnessed when running procmon and then trying to add the roles, the NT System and the Windows Internal database user had access denied issues on 100+ registry keys when trying to add the roles. After that the system is not behaving normally.
    The errors displayed almost mirror the errors that would occur on Windows 2012 when those two roles would be added which of course is officially NOT supported on that system.
    This blog needs serious revision:
    http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
    This is the excerpt from that blog: Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller.  In addition, we published
    guidelines for how RD Session Host could be used without the RD Connection Broker.
    Microsoft Support was curteous and helpful and they were the ones who advised cutting our losses, which mirrored my hunch after seeing what was transpiring in the system.  They refunded my money for the support call. 
    For me, it was an opportunity to find out if there was any way to configure Windows 2012 R2 in the Same manner that it was setup as Windows 2008 R2 and lay that to rest. The coexistence is poorly implemented. It is as if there was a reaction from all the deprecation
    of bread and butter features such as shadowing in TS and the coexistence of AD DS and RDS to where those features were re-added haphazardly. (I have no complaints on shadowing on Windows 2012 R2 it works, just do not like having to go to server manager to
    use it).
    I opted for virtualizing the Domain controller to eliminate the incompatibility issues and that is what I will be doing from now on. I found free solutions for backing up and reporting for virtual machines as well as the suggested procedures for configruing
    a Domain controller as a virtual machine on a Hyper-V environment and I will be sticking to those. Thus far the setup has been operational.
    I am not allergic to virtualization, but for really small setups it adds additional time and considerations but if that is how it has to be done, so be it. Windows 2008 R2 days are numbered and since we can usually squeeze 5-7 years on quality server equipment,
    buying a Windows 2008 R2 setup now is a borderline disservice in my opinion.
    Hopefully someone finds this useful and saves some time.

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you need any other assistance?
    Based on your description, you are describing your story of successfully implementing RDS server with AD role and more regarding all RDS related scenario. For shadowing feature, you can use with command also. Below is the syntax to shadow a session.
    mstsc /v:<ServerName> /shadow:<SessionID>
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • The Active Directory Domain Services is currently unavailable....printer "unseen"

    I Have a Windows 7 on an Acer Aspire 5742 laptop and an HP LaserjetP1102w. There are two wireless laptops in the household. I am trying to print from Microsoft Word Starter, but it states "No Printers Installed" and if I try to add a printer I get  the message: The Active Directory Domain Services is currently unavailable.
    I can print Self Test/Device configuration sheets (on this the iPv4 reads as 0.0.0.0.), a printer test page and a test print from the HP Print and Scan Doctor.  It is the network  which is not reading the printer.
    I have disabled my firewall, un- and re-installed the printer.  I have also tried to uninstall and reinstall the printer using the Window 7 installer utility. but that tells this printer "is not currently supported by this Wizard"
    I have searched the web for people with the same problem but found nothing that has helped me.  Not to put too fine a point on it I am at my wit's end.
    You are my last resort (no pressure, then!)
    This question was solved.
    View Solution.

    Are the configuration reports with the 0.0.0.0 being printed directly from the printer?  A 0.0.0.0 address indicates the printer is not actually on the network (or at least not getting DHCP information from the router).  The Print and Scan Doctor should not have been able to print to it unless it happened to be connected by a USB cable as well.
    What brand and model is the router?
    Is the wireless light a solid blue light or a flashing blue light?
    You mentioned an Active Directory Domain Services error message.  Outside of corporate networks, this is not an error message you should get.  I suspect there might be a deeper software issue at fault.  Please provide the exact steps you are using to add the printer to generate that error message.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cannot Print. "The Active Directory Domain Services is currently unavailable"

    Hi there
    I cannot print and I have not been able to find the fix via existing forum threads.
    System: 
    Win 7 Ultimate 64 bit German - Profile language is Danish (installed a week ago and completely windows updated)
    Office 365 Small Business Premium
    HP DV8 Laptop. i7, 512GB SSD, 8GB RAM
    HP LaserJet P1006 USB printer.
    Problem
    No matter if I try to print from IE, Notebook, Word 2013 or anything else, I cannot chose my printer (P1006).
    If I try to Add Printer in Word 2013, I get the "The Active Directory Domain Services is currently unavailable" error. 
    In Devices and Printers, the P1006 is visible, but there is no driver installed.
    Trying to install the correct driver: 
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3435683&prodTypeId=18972&prodSeriesId=3435682&swLang=8&taskId=135&swEnvOID=4063
    only creates a general error during installation: "Printer  Software Installer has stopped working - A problem has caused the program to stop working correctly. Windows closes the program and will notify you if a solution has been found"
    I have tried all the solution software from Windows, from HP (for the laptop and for the printer) - but nothing comes up with any details or suggestions. 
    What should I try?
    Absolutely everything else works perfectly on the system. 
    Reffered here via http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/cannot-print-the-active-directory-domain-services/1cf47626-a2cd-4b7a-94b6-10cbc8ab02b0

    Hi,
    I suggest you try the following:
    1. Try the steps in the following article:
    Troubleshoot printer problems
    http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
    Fix printing problems by resetting the print spooler
    http://support.microsoft.com/kb/2000007
    2. Let us try updating the printer driver which might help you in resolving the issue.
    Click on the link below for more information on updating the printer drivers.
    Find and install printer drivers
    http://windows.microsoft.com/en-US/windows-vista/Find-and-install-printer-drivers
    3. Remove the printer and add it again:
      Go to Control Panel
      Select Printers
      Right-click on Add Printer
      Select Run as Administrator
    Now try to add your network printer
    Also a thread for your reference:
    Error message when attempting to print: Active Directory Domain Service is Currently Unavailable 
    http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/d6212275-24d6-4168-830a-9441f861cb76
    Hope this helps.
    Vincent Wang
    TechNet Community Support

  • Cannot find the object "CrossRef" in Active Directory

    I am trying to install Lync 2013. I'm getting the following error: Error:
    An error
    occurred: "Microsoft.Rtc.Management.Deployment.ActiveDirectoryException" "Cannot
    find the object "CrossRef" in Active Directory."
    WARNING: Enable-CSAdForest failed.
    This error is at "Step 3: Prepare Current Forest" of the install.

    I've tried to run the forest prep as a local domain and I get the following:
    Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-052cfe14-7f42-4969-88da-83279413ab8c.xml".Enable the Active Directory forest to host Lync Server 2013 deployments.
    Prepare Forest Active Directory settings execution failed on an unrecoverable error.Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".WARNING:
    Enable-CSAdForest failed.WARNING: Detailed results can be found at "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".Command
    execution failed: Container CN=Microsoft,CN=Program Data,DC=xxx,DC=local not found

  • The box indicating that this domain controller is the last controller for the domain is unchecked. However, no other Active Directory domain controllers for that domain can be contacted

    I have 2 domain controllers running 2003 server, server1 and server2. I ran dcpromo on server1 and removed AD and removed him from the domain and disconnected from network. I then added a 2012 server
    with the same name and IP address server1 with no problem. Replication from sites and services work fine on both controllers.
    The new 2012 server1 is GC. I transferred all FSMO roles to server1. Again no problem and replicating using sites and services. AD on server1 is populated correctly.
    Now what I had intended on doing was a dcpromo to remove server2 from the domain so I can then add another 2012 server. That is when I get the: "The box indicating that this domain controller is the last controller for the domain
     is unchecked. However, no other Active Directory domain controllers for that domain can be contacted.
    I have DNS installed on both servers and both look good with replicating there. Strange thing is when on the 2012 server within DNS if I right click and connect to another DNS server I can add server2 just fine but from server2 adding server1 it tells me it
    is not available.
    Help please!

    Hi,
    As there is server 2012 DC (SERVER1) DC is operational in a domain then "This domain controller is the last controller for the domain" should be remain unchecked when you demote SERVER2 DC. 
    If you are getting error "Active Directory domain controllers for that domain can be contacted" while demoting SERVER2 DC then check the DNS pointing on both as per below article, disable windows firewall on all DC, less possiblities but worth to check if both
    are different site then check the ports are open on firewall. 
    http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/
    http://technet.microsoft.com/en-us/library/cc766337(v=ws.10).aspx
    http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx
    run “ipconfig /flushdns & ipconfig /registerdns“, restart DNS server and NETLOGON service on each DC and try to demote server2 DC.
    If issue reoccurs, post dcdiag /q result.
    NOTE: If initial replication was completed between both DC (new 2012 and old DC) then you may remove the server2 DC from Active Directory forcefully (DCPROMO /FORCEREMOVAL) and perform metadata cleanup.
    Active Directory Metadata Cleanup
    http://abhijitw.wordpress.com/2012/03/03/active-directory-metadata-cleanup/
    Best regards,
    Abhijit Waikar.
    MCSA | MCSA:Messaging | MCITP:SA | MCC:2012
    Blog: http://abhijitw.wordpress.com
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

  • Activating Windows 7 by using KMS Without the Active Directory Domain environment

    Dear,
                 Can we able to activate the Windows 7 O/S Machines by using KMS without the Active Directory Domain environment,As our some of the Computers will not connect with AD domain, we need to setup the speprate KMS
    server for this.
    Thanks
    Balaji K 

    You can point the KMS clients to the KMS host machine by opening an Elevated CMD prompt:
    and running slmgr /skms to point directly to the KMS host.
    You do not need a Domain controller.
    Volume Licensing: Key Management Service (KMS) Client Options:
    /skms <Name[:Port] | : port> [Activation ID] [Activation ID]                                                                                                          
    Set the name and/or the port for the KMS computer this machine will use. IPv6 address must be specified in
    the format [hostname]:port                          /ckms [Activation ID]                  
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • I keep getting the "No such file or directory" error when files really

    I keep getting the "No such file or directory" error when files really
    i did some research online and found nothing yet, can anyone help, this has been happening with new files for like a week. thanks

    additional information needed.
    solely stating "i hav problemz plz halp" never leads to a solution
    read this:
    http://www.catb.org/~esr/faqs/smart-questions.html
    Last edited by robmaloy (2009-04-21 07:16:16)

Maybe you are looking for