Is it possible to print a full page in Illustrator and bleed the art off of the edges of the paper?

Is it possible to bleed artwork off the edges of an 8.5 X 11 sheet of paper? I'm trying to print cards that are 2 up in landscape orientation and the art keeps getting trimmed off an inch or so before the edge of the paper.
RIchard

Have you checked your Page Tiling? (View>Show Page Tiling) The border that you see will show you how it prints. But you can save your file as an Illustrator PDF and then open it with Adobe Reader and given that your printer is borderless . . . you can print to the edges. But a bleed is something where your design extends beyond the edge of the finished product and you cut into the bleed, trimming off some of the art and leaving a smaller product than the original paper size.

Similar Messages

IMac not printing out full pages - HELP!

Hello,
I'm using a friend's iMac, Version 10.4.11, and went into Printer Settings in an attempt to try and set the printer options so my printer (an HP Deskjet 920C) will actually print a full page (at this time, it's cutting off some of the page -- hence, 90% of the page prints out fine, but it's cut-off toward the right side). I hit the "Apple and P" for printing option and tried to adjust there as well, but still got the same printout with some of the content cut-off.
Any ideas on how to fix this issue?
Thanks so much if anyone can assist.
-JC

You are not describing the problem clearly enough for an answer. There is nothing in your description that relates to printing.
You need to explain exactly what your grandfather is trying to do, what results he is getting, and where they are coming from. That is not clear from your message.

Why can't I print a full page photo in Photoshop Elements 10???

Why can't I print a FULL PAGE PHOTO IN PHOTOSHOP ELEMENTS VERSION 10, (letter size 8.5 x 11?) I have tried resizing, cropping and anything else I can possibly think of to no avail!!! VERSION 7 was so easy just print (fit to page)! I'am pulling my hair out trying to accomplish this! If anyone can tell me how to do it I would be eternally grateful! Thanks Julie
P.S. I can't even print a 8 x 10 properly!

Sarah, my printer drivers are updated! This problem seems SO COMPLICATED when it should be so easy! It's like the more advanced these programs get the less you can figure them out!!!! I'am ready to offer a reward to fix this!!! The stress of trying to figure this out is making me crazy!
From: saurabh288<mailto:[email protected]>
To: JULIE HIGH<mailto:[email protected]>
Sent: Thursday, February 14, 2013 11:10 PM
Subject: Why can't I print a full page photo in Photoshop Elements 10???
Re: Why can't I print a full page photo in Photoshop Elements 10???
created by saurabh288<http://forums.adobe.com/people/saurabh288> in Photoshop Elements - View the full discussion<http://forums.adobe.com/message/5074854#5074854

How can I print a full page of a single mailing label from Contacts

I am trying to use Contacts to print a full page of avery labels for a single contact. The only thing I can get it to do is print one label in the upper left corner of a page of Avery Labels. I can print a full page of DIFFERENT contacts, but not a full page of a Single contact. Any ideas?

Are you using DesignPro from Avery? You should.
It gives you the option to print individual labels or all the same:

When I print a PDF it always prints as a booklet, how can I print 1 full page?

When I print a PDF it always prints as a booklet, how do I print a full page?

In the Print dialog box you should be able to indicate which page you want to print and that page will print. For instance, if you are viewing page 4, in the Print dialog, select "current page" and page 4 prints. This won't work if your page is actually a 2-page spread. What size is the booklet?

Is it possible to have a full page of text?

I would like to create a book with a page of just text. I cannot find a page layout that will let me do this. Has anyone been able to accomplish this task?
IMAC Mac OS X (10.4.10)

Jonathan:
Welcome to the Apple Discussions. You can have a full page of text but you have to create an image file of the text and put it in a one photo per page layout like this. Create the text in your text editor with the Page Setup set to Landscape. When you have the text as you want it, go to the Print window, click on the PDF button and select Send PDF to iPhoto. That will create a 200 dpi jpeg file for that page and import it into iPhoto where you can use it in the book. A word of caution: this is an Automator processs and when the conversion is done and ready to import a window will come up asking you to select an album or name a new one to put the file. This window does not always come to the front so make sure you have all other windows minimized. Then minimize iPhoto's window and you'll see the Automator window. I sat for 30 minutes the first time and aborted the process before I realized what was happening.
You can also have the text in the portrait orientation if you'd like.
With an application like Word or Pages you can fancy up the text page more than TextEdit can.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

We are working on Mac's and have a D110 series Photosmart. Can't get printer to print a full page.

Only my MacAir has developed problems getting the printer to print a full page. It prints 1/2 then stops, blinks and says I have to restart the printer. Am I missing an update or something? It is not our network as other Mac's and even our iPads have no problem.

It appears to be isolated to the Mac that is having the issue as it is the only one having an issue.
What OS X version is it using (10.4, 10.5, 10.6, etc.)?
Do you receive any other error messages on that system related to the printer?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Hi, is it possible to print also A2 with adobe illustrator ? Thanks for help.

hi, is it possible to print also A2 with adobe illustrator ? Thanks for help.

pandron,
One simple way would be to save as/print to PDF, then print from Acrobat/Reader.
You could also make a copy of the file, then change the Artboard size and scale up the artwork and print from that (presuming you still wish to work in A4 or something).

We are just about to purchase an iphoto book but received the message that we had one or more empty photo frames. We have gone over each page several times and found no empty frames. We cannot purchase the book because we cannot get beyond this message.

We are just about to purchase an iphoto book but received the message that we had one or more empty photo frames. We have gone over each page several times and found no empty frames. We cannot purchase the book because we cannot get beyond this message. Any ideas on how to rectify this situation?

So far every time this erros has occured it has been correct - the most difficult one to find is a full page photo layout behind a full page photo - this is hard to find - click here for a discussion on how to find it
LN

I have downloaded some videos to my ipad via my SD card now my storage is full, how can I transfer the videos off my ipad to clear the storage but keep the videos on another media device (external hard drive)?

I have downloaded some videos to my ipad via my SD card now my storage is full, how can I transfer the videos off my ipad to clear the storage but keep the videos on another media device (external hard drive)?

There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
 Cheers, Tom

Report cannot print in full page

Hi all,
I have generated the report and when view on screen, the format is ok but when submitted to printer, the report output does not show in full page, right hand side of the paper is blank off.
I am using report v.6.0.8.25.0
Rgds
Lim

Hi,
Under Report Builder directory you will find one directory which contains printers file with extensions of PRT, check the setting their.
Thanks
Shishu Paul

How can I print a full page 8.5x11 photo using mg2520? My operating system in windows 8

I am currently running windows 8 and using a canon pixma mg 2520 and cannot print full size 8.5x11 prints. I can print 4x6 but would like to print full size pictures...please help!!!!!!!!!!1

Hi kvsalazar24,
There is a program that comes with the printer named Easy-PhotoPrint EX that can assist you with printing photos. If you do not have the program installed, it can be downloaded from the Canon USA website. Please click here to go to the Drivers and Software page for the PIXMA MG2520. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "SOFTWARE" section and click the Easy-PhotoPrint EX file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded the file, please double-click on it and follow the prompts to install the program on your computer.
Once the program is installed, please follow these steps to print a photo:
1. Open Easy-PhotoPrint EX.
2. Once inside of the application, you will see a folder structure on the left-hand side where you can select a photo or image. Please navigate to the location of the photo/image you would like to print. When you do, all available images in that location should appear in the right pane of the window. Please note: If a screen appears with options to Photo-Print, Create an Album, Sticker Print, etc., please select the PHOTO-PRINT option to view the area with the folder structure.
3. Underneath each of the photos appearing in the right pane of the window, you will see a n up and down arrow, as well as a "0". Please click the UP arrow once underneath the image you would like to select, then click the PAPER SELECTION tab at the top of the window.
4. On the PAPER SELECTION TAB, please select the PRINTER, PAPER SOURCE, PAPER SIZE, and MEDIA TYPE, then click the LAYOUT/PRINT tab at the top of the window.
5. Please select the desired layout from the left-hand pane of the window. When you do, a preview of what the image should look like when printed will appear in the right-hand pane of the window.
6. Once you have selected a layout, please click the PRINT button. The photo/image should print.
If you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Preview prints everything Full Page Size?

Hi,
After upgrading to 10.6 several months ago ( yes, it took me a while) I now have a printing problem.
Every picture I get via email, after I download it to the desktop, will only print in Full Sheet of paper mode.
Scale To Fit is automatically selected. It doesn't change when I select Scale and enter the proper %, it still fills the page.
I tried Preview--Preferences--Images--and Scale Large Images was selected. I selected Print Actual Size and tried it. No different.
You used to get a Print option and a Print Setup option on the File pulldown. It was easy to set the percentage you wanted to print at. No more.
How do I stop images of all sizes being automatically upscaled to a Full Page?

Thank You.
After submitting the question, the similar questions popped up on the righthand side.
Matthew Morgan answered this over TWO YEARS AGO. What the ****, Apple hasn't fixed or notified anyone of this?
I select Scale, enter the correct percentage, and then hit Tab after I'm done. Makes no sense but it works.
Why wouldn't it just print with the settings that were on the page when you hit the Print key like ie always did?
Thanks Again

Is it possible to print multiple InDesign pages on one sheet?

Say I have a 10 page InDesign document. Each page is fairly small. When I go to print out those proofs, can I print all 10 pages on one sheet of paper? Or do I have to copy each layout separately onto a new document to group them? Just to save paper really.
ID CS3

Daniel Flavin wrote:
I agree. That's not gonna happen even with Feature Request...everybody loves drop shadow...
are you kidding me?
That horrible drop shadow bar adds no value to thumbnail prints and causes designers to have to trim the prints to the thin line page edge that prints. With the bar under the thumbnail, it interferes with page design decisions, which is really the whole point of printing thumbnails--to save paper while quickly evaluating the design of the page.
It would also be helpful to have thumbnail print options galore, for printing miniature booklets with pagination controls, etc., for little samples we could give to our clients.
If the InDesign software engineers would add realistic drop shadow controls for thumbnails, that would be fine. But designers still want the ability to turn off the thumbnails.
KILL THE WORTHLESS DROP SHADOW BAR AND PLEASE GIVE US MORE THUMBNAIL PRINTING OPTIONS.

Is it possible to print labels using pages?

I need to print labels for honey jars but I can't get the font size small enough for all the details I need to print. Size 9 seems to be the minimum. I used to print them using Appleworks Drawing but now I am using OSX 10.7.5 I can no onger use appleworks.

Just type the size in the size field. I got down to 1 point type, which is illegible.
Peter

Is it possible to print a full page in Illustrator and bleed the art off of the edges of the paper?

Similar Messages

Maybe you are looking for