Is it possible to run more than one case at a time?

Using a case structure, is it possible to have more than 1 case running at a time? I'm currently using a for loop's iteration terminal to select which case to run but each case contains a for loop with a timer delay. I want them all to run simultaneously somehow..?
Maybe possible using a different type of loop?
Thanks for any help.
Rob

> Using a case structure, is it possible to have more than 1 case
> running at a time? I'm currently using a for loop's iteration terminal
> to select which case to run but each case contains a for loop with a
> timer delay. I want them all to run simultaneously somehow..?
> Maybe possible using a different type of loop?
>
If it did this, we'd consider it a bug. By design, only one diagram of
a case is supposed to run, the one the selector specifies. If you want
them to run in parallel, put the contents into separate case statements
and use a Boolean to either run or skip the code.
For example, if you have cases run whenever their bit is set in an
integer, then you would have cases for bit 0, 1, 2, and 3. Instead of
putting them in one case, make fo
ur cases. Put the AND logic in front
of each for ANDing with 1, 2, 4, and 8, and wire the output Boolean to
the case structure. Now take i and wire it to the logic. The 0 diagram
will run on odd numbers, etc.
Greg McKaskle

Similar Messages

  • Possible to run more than one iDVD at one time?

    Hiya, I'm currently running a nice shiny QuadG5 and when running iDVD6 I've noticed it doesn't use all the resources my machine has to offer (it usually hovers at around 130% out of 400%). Does anyone know if it's possible to run more than one instance of iDVD06 at once? I was thinking about creating a copy of the whole iDVD app and seeing but it's running a render right now so i can't disturb it. Seems a shame to have those yummy G5's sitting there doing naff all.
    cheers, Dave

    on my other hp scanner and copier i could set the no of copies i wanted. on this one i cannnot find that option.
    thanks for the reply

  • Is it possible to add more than one page at a time in pages - word processing?

    Is it possible to add more than one page at a time in pages - word processing?

    I haven't been able to find a way to add more than one page at a time.  I think you'll have to add them one at a time. 

  • Is it possible to print more than one picture at a time on a single page and if so, how?

    is it possible to print more than one picture at a time on a single page and if so, how?

    Hi Rowegarth.
    HP Photo Creations offers several ways to print multiple photos on a page. Here's a link to some preset grids. If you don't have HP Photo Creations already, you'll be prompted to download the software. (It's a free download.)
    You could also start with a "Design Your Own" collage print with a white theme.
    This video shows some ways to print multiple photos in HP Photo Creations to make them easier to cut out:
    www.youtube.com/embed/VRoGjhXPm4I?rel=0
    The beginning shows an older version of the software, but the second half (at 1:17) explains the grid settings. 
    Hope this helps,
    RocketLife
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time.  Apple and 3rd party applications - all freeze the main menu.  Safe mode seems to work OK. Tried repairing permissions - didn't work.

    For the past 60 days I've experienced Main Menu freeze when running more than one application at a time.  iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily.  No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen).  I've tried booting is Safe Mode and I don't seem to have a problem.  I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items.  Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem.  I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options.  Do I have any more options?    

    Question:  Everytime an app crashes I have the option to report it to Apple - which I usually do.  But I've NEVER reported a Main Menu freeze because it never asks me to
    There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
    This sure sounds like a resource problem...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • Is it possible to email more than one photo at a time with the iPhone? Thanks

    Is it possible to send more than one photo in an email using with the iPhone? Thank you in advance for your help

    Yes.  Open your camera roll in the thumbnail view, tap the arrow button on the top right, tap all of the photos you want included in your email, tap Share at the bottom, tap Email.  Note: all email providers have limits on the size of emails that are permitted so be careful not to try to add too many or it may not be delivered.

  • My 2009 iMac freezes and won't run more than one application at a time - how can I fix this?

    Help! My iMac has been getting worse regarding freezing, especially when trying to open iPhoto. It will load slowly, and then I get the pinwheel of death for ever, until I shutdown and try over again. It usually takes several tries, and usually overnight. How can I resolve this issue?

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • When will my iPad be able to run more than one app at a time?

    I would like to split my screen and use more than on app at a time.  Are their plans for this in the near future?

    Send feedback/suggestions to Apple.
    http://www.apple.com/feedback/ipad.html
     Cheers, Tom

  • Is it possible to airplay more than one device at a time, for example splitting the screen into quad-view?

    I was told by someone that it is possible to connect up to 4 devices at a time through airplay, but I can't work it out.
    Is this information incorrect? I'd like to have 4 devices displayed at a time; or at least 2.
    Thanks

    No you can't.
    Audio can be sent to multiple speakers in some cases (eg from iTunes), but not video.

  • New Mac user: Is it possible to move more than one file at a time on a Mac?

    I'm a new Mac user. Something so simple in Windows doesn't seem possible in Mac OS and AppleCare doesn't have a clue either. I have edited video files as well as the master footage video file in individual folders created by FCP. I need to transfer 6 video files, 20GB each, onto an external hard drive. This will need to run overnight because I'm using an external HD with only USB and it will take 10 hours or so. How do I transfer these 6 files all at once?
    Note: The 6 files are in 6 different folders. I can't transfer the entire 6 folders because they contain other video files in them that I don't need to transfer and are larger than my 20 GB edited files. And last, I shouldn't have to drag these files individually to a folder on the desktop first, because that will take an hour and is a waste of time because I would have to sit there and wait for each to finish.

    As a new Mac user, you might find the following sites helpful:
    Mac 101
    and since you're coming from using Windows:
    Switch 101
    and an independent site many people find helpful:
    My First Mac
    Regards.

  • Running more than one report at a time using Developer Suite 10g(10.2.1.0)

    Hi all,
    We are using the Developer suite 10g(10.2.1.0). I'm finding it exciting to work with it. I'm facing the problem with report server. For example I'm trying to run two reports at a time from two different locations, the report server starts working on first report and the second report will be in queue. In 6i it was not the case. so i need such a scenario. where in the two users can take the reports concurrently instead of this FIFO method.
    Regards,
    Alok Dubey
    Edited by: Alok Dubey on Dec 15, 2008 5:22 PM

    Hello,
    By default, the reports server is configured with 2 kinds of engines :
    The default reports engine and the "URL engine" :
    For more details about the "URL engine " :
    http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007633
    3.5 Configuring the URL Engine
    Thie "URL engine" has a minEngine=0 and maxIdle=30 :
    <engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>
    It means that if the "URL engine" is not used, it will be stopped after 30 minutes.
    That's why you can see 2 engines just after having started the reports server and only 1 engine 30 minutes later
    Regards

  • When will this thing run more than one app at the same time?

    When will we be able to run more than one app at a time?

    As has been suggested, we won't know about future features until they announce them, but by understanding the current situation we can guess.
    The current limitations on third-party applications running in the background make sense. It's not a technical limitation. App store downloads, and the phone functionality run in the background while other applications are up front.
    It's a resource limitation. Processor power and probably more importantly battery life are the key limiting factors. It's not that Apple doesn't want you to have more functionality. It's that it currently struggling to deliver a quality experience that satisfies as many customers as possible. As it is the battery life is only just acceptable enough for most current customers, many are unhappy with it.
    So if more efficient chips or batteries become available, or some genius programmer manages to squeeze out a whole lot more out of less, then we'll see more background processes allowed.

  • Using the the multiple profiles and running more than one instance of Fire fox at atim

    I use F/F in a gaming situation I needed to be able to run more than one session at a time and read about a feature called multiple profiles. Then I read iin another forum that I could have multiple instances with the following bat file :
    @echo off
    set MOZ_NO_REMOTE=1
    start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -p-no-remote
    set MOZ_NO_REMOTE=0
    I also have the Beta 4.06 on my machine and even though the batch file directs it to wither the Beat or the Non Beta they both seem to track the profiles and can be used in either version.
    However It's not working as I described running two browsers with grease monkey it will start to mis handle data and they both lock up

    There is no need to set MOZ_NO_REMOTE, remove that part of the bat file. Change the start line to:
    start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -no-remote -p "profile name"

  • Copy more than one clip at a time from iPhoto to iMovie?? Please help!

    Is it possible to copy more than one clip at a time from iPhoto to iMovie? I can't find a way to select/copy more than one.

    OK you can leave them in iPhoto and access them from the iMovie Event for iPhoto.
    If you prefer to move them to a regular iMovie Event, you can do the following.
    1) right-click on one of the iPhoto clips and select "Reveal in Finder". This will open a finder window showing the clips in the iPhoto Library.
    2) In a different Finder window, create a folder to hold your event in iMovie. If you are using an internal drive, create a folder using your desired Event Name under the Movies/iMovie Events Folder.
    Note: If you are using an external drive, create a Folder called iMovie Events at the top level of the external drive. Then create the (Event Name) folder under this. The external drive must be formatted as MacOS Extended (journaled) for this to work.
    3) Select all the clips in the iPhoto finder window that are part of this event and Move them to the Movies/iMovie Event/(Event Name) folder.
    4) After you have done this for all the Events, open iMovie and let it generate thumbnails. This may take a while.

  • Wiki 2: Attaching more than one file at a time?!?!

    Is it possible to attach more than one file at a time to a Wiki page?
    Currently I can only attach one at a time, its quite tedious - Are there any tricks to speed up the page build?
    DF

    Matthias,
    I appreciate the quick response and that would definitely work. I should have been more clear in my original post. I would like the ability for my end-users to browse individual files for viewing and downloading, as well as uploading. I don't think a zipped file would suit my needs..
    Thanks for the advice though...
    DF

Maybe you are looking for

  • Turn 'em off or leave 'em on?

    Thanx to the folks on this site I recently was able to connect both of my iBooks wirelessly. Now my question is-and I am not so concerned about someone accessing the iBooks, I am concerned about physical harm to them-can I leave "AppleTalk" and "File

  • Smooth Lines in PS

    In Illustrator you draw a line and Illustrator will automatically smooth out the line so it looks clean and smooth. My question: Is there an equivalent command in Photoshop? Note: I am using CS6

  • Need help converting Videos for ipod

    Hey i just got my ipod. .and i need to get a converter for my movies.. any suggestions?

  • IDOC for changing user status to 'HIST' on Functional Location

    Hi. Can anyone please support me with an inbound IDOC for changing status on existing Functional Location? Thanks.

  • Can not enable HDD Protection

    When I open the HDD Protection the window opens but it is grayed out and "OFF" is selected, why is it grayed out?  How to I activate it?  Please & Thankyou.