Is it possible to separate administration port from application port ?

Hello,
I would like to know if its possible to specify a different port to access the Apex administration and a different one for the application.
Default APEX port : 80
At present, we have for example :
Administration page : <server address>/apex/f?p=4550
Application page : <server address>/apex/f?p=100
Requirement : The Apex administration need to be blocked from exterieur of the network (security issues)
Thanks in advance.

Hi,
did you consider installing only a runtime environment ( so there is no more development gui ) ?
Also a apache reverse proxy restricting access to applications might be a solution (never tried the restriction but a reverse proxy in front of apex works great and has more
advantages, check http://www.linuxquestions.org/questions/linux-newbie-8/apache-restrict-access-to-specific-url-based-on-ip-4175435113/).
I'm also curious if there is a straightforward solution like you asked, exposing it via another port, would be really nice if it's possible direct in APEX but I've never heard of it.
Regards
Bas

Similar Messages

  • Possible to hide administrations/database from list?

    Hello,
    My customer wants the users to see the companies that have the usercode the user has.
    The list shown when you select Administration->Choose Company
    Based on the 'usercode' and password only the companies/database that have that provide access to that user code should be shown.
    Is that possible? If so, how can I set it?
    Thanks in advance,
    Chief

    Hi
    i think we cann't capture the events on login Form.
    Regards
    Vishnu

  • Removing port from channel-group

    I've run into an odd issue with port aggregation where I decided to remove a port from a port channel and put it into another but in my SNMP tool it still belongs to the old port channel and the new simultaneously.
    The port channel was created by using:
    (config)#interface gigabitEthernet 1/0/22
    (config-if)#switchport mode trunk           
    (config-if)#channel-group 1 mode active
    And then changed through
    (config)#interface gigabitEthernet 1/0/22    
    (config-if)#no channel-group 1 mode active
    (config-if)#channel-group 2 mode active
    I also get this when I pull information on etherchannel.
    #show interfaces gigabitEthernet 1/0/22 etherchannel 
    Port state    = Up Mstr Assoc In-Bndl 
    Channel group = 2           Mode = Active          Gcchange = -
    Port-channel  = Po2         GC   =   -             Pseudo port-channel = Po2
    Port index    = 0           Load = 0x00            Protocol =   LACP
    Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
            A - Device is in active mode.        P - Device is in passive mode.
    Local information:
                                LACP port     Admin     Oper    Port        Port
    Port      Flags   State     Priority      Key       Key     Number      State
    Gi1/0/22  SA      bndl      32768         0x2       0x2     0x117       0x3D  
    Partner's information:
                      LACP port                        Admin  Oper   Port    Port
    Port      Flags   Priority  Dev ID          Age    key    Key    Number  State
    Gi1/0/22  SA      32768     0817.35e4.2c80  26s    0x0    0x2    0x118   0x3D  
    Age of the port in the current state: 164d:21h:32m:44s
    Could this be an issue with my snmp tool (observium) or are there any additional steps for removing a port from a channel-group? Switch restart?
    System image file is "flash:c2960s-universalk9-mz.150-2.SE4.bin"

    Hi,
    I would say that this is related to the snmp tool, once you remove the port from the previous channel and added to the new it will belong to that one only, there is no way that an interface will below to 2 different port channels.
    Also there is no need to restart the switch or anything like that, you can use the following commands to confirm that the interface is now part of the new channel group:
    Show etherchannel summary 
    Show run interface gi1/0/22
    With those commands you will see that the interface belongs to channel group 2, and the command you attached above shows that the interface belongs to po2.
    Hope this helps

  • Print a report from Application Express direct to a CUPS Printer

    Hi all, I'm new to this technology, is it possible to print a report from Application Express directly to a CUPS Printer? Can someone tell me in laymans terms how to do it? I find the terminology and documentation less than helpful.

    Jeremy,
    BI Publisher handles submitting reports directly to a CUPS printer. However, the APEX integration doesn't currently integrate with that portion of BI Publisher.
    Here's an options:
    Use the Java API of BI Publisher to build a custom Java program that would do this for you. Delivering to CUPS is part of the Java API.
    Bryan

  • Is it possible to transfer music/videos from one itunes account to a separate one?  I need to give my music and videos that I bought a grandchild to her for her ipad.

    Is it possible to transfer music/videos from my itunes account to a grandchild (she will need her own account)  I bought her music and videos and let her play with my ipod touch.  Now she has an ipad.

    No you cannot transfer purchases from one account to another account. Apple does not allow it and never has allowed it.
    She can use you Apple ID on the device and switch between her ID and your ID, but that can cause problems at times and can become a bit of a pain.

  • I have to send messages through UDP multicast and unicast from same port. In Labview I tried that it throws error. I heard it is possible by means of Datagram (UDP unicast and multicast) Port Sharing. How can it be achieved in Labview?

    I have to send UDP multicast and Unicast messages to a remote port from a single source/local port. I tried by opening UDP unicast and multicast in the same port and got the expected error. I tried by opening a unicast connection and sending unicast messages.After that when multicast messages has to send I closed unicast and opened multicast in the same port.This is not throwing any error. But my requirenment is to comminicate with another application in C ++ which recieves this data, throwing an error of lost connectivity and both the applications are not abled to communicate properly. 
    In the other application with C++ this is implemented using port sharing. So how port sharing can be implemented in labview so that I can send both multicast and unicast messages from the same port?
    Thanks in advance

    UDP is a sessionless protocol, meaning that anyone listening on the specified port CAN receive the data. CAN because as you noted there is no guarantee in the protocol that it will be received. And if you send the data not to a specific address but a multicast address not only one computer can receive it but in fact every computer on the same subnet listening to that multicast address and depending on the TTL of the packet also computers in neighbouring subnets, although that last one is not a very reliable operation since routers can be configured to drop multicast packages anyhow despite of a different TTL saying otherwise.
    Accordingly there is no real way to make sure that a receiving UDP port is not already in use, since you don't build up a connection. UDP is more or less analogous to shouting your messages through a megaphone, and anyone listening on the right frequency (port) can hear it. You do bind the sender socket to a specific port number but that makes little difference.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?

    Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?
      Now a days we are saving / extracting data in a excel spreadsheet, but we would like to do that using a database because it is better.

    You can use ODBC connection to work with SQL Server database.
    Use SQLExec object to execute the SQL statement. Here is a KB about the SQL statement.
    http://digital.ni.com/public.nsf/allkb/4ADEEA04CD24AE0B862565E20002A16F?OpenDocument
    To write data to spreadsheet is more straightforward because Lookout has built-in spreadsheet object. But you need to write SQL statement by yourself to interact with other database.
    To read the data back is the same way. Just use "select" SQL statement to query. You can use Datatable object to query.
    The "Data Source" can be "DSN = data source name;". The data source name is configured in Control Panel->Administrative Tools->Data Sources(ODBC).
    Ryan Shi
    National Instruments

  • Is it possible to import the total from one worksheet to appear in a cell in another worksheet?

    Is it possible to import the total from one worksheet into another separate worksheet?

    In Numbers terminology a File (of document) contains sheets.  Sheets contain tables, and graphic elements (circles, text, lines, charts, etc.).
    So...
    if you are asking if you can reference a cell of a table in another table in the same sheet: yes
    if you are asking if you can reference a cell of a table in another sheet: yes
    if you are asking if you can reference a cell of a table in another sheet of another document: no

  • Is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input?

    is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input? If so, what equipment is needed?

    The ipad not support wireless projector yet.
    The workaround is you are using computer that connected wirelessly [needs 2 wireless adapter] / via cable to projector and connected also to the wireless router.
    You are controlling the computer via wireless connected to the router using remote desktop app like splashtop, teamviewer, logmein, vnc, etc. You must set the remote desktop port and app at the computer too as ipad app support.

  • How to get server hostname and port from web form

    Hi All,
    I need to find out server hostname and port number
    from 9i form.
    That is if the form was called via:
    http://myserver.com:1234/f90servlet?form=test,
    i would like to call some
    GET_XXX_PROPERTY(SERVER_HOSTNAME) that would return
    myserver.com
    and
    GET_XXX_PROPERTY(SERVER_PORT) that would return
    1234
    or alternatively
    GET_XXX_PROPERTY(SERVER_URL) that would return
    complete URL, so that i can parse it myself.
    Does anything like this exist? If not,would be
    possible to get that information from any Java
    function via java importer?
    BR,
    Robert
    BR,
    Robert

    Robert,
    I'd add the code as a Java Bean in Forms and get this information from the Forms request URL.
    Add the following bean to a Canvas and make it a size of 1x1 pixel so taht it appears hidden
    import java.applet.Applet;
    import java.net.URL;
    import oracle.forms.handler.IHandler;
    import oracle.forms.properties.ID;
    import oracle.forms.ui.VBean;
    public class FrmRequestInfo extends VBean
    public static final ID pGetPort = ID.registerProperty("GET_PORT");
    public static final ID pGetHost = ID.registerProperty("GET_HOST");
    public static final ID pGetProtocol = ID.registerProperty("GET_PROTOCOL");
    private String _host;
    private String _port;
    private String _protocol;
    private URL FormsURL;
    Applet m_applet;
    /*Forms settings*/
    IHandler m_handler;
    public FrmRequestInfo()
    public final void init (IHandler handler)
    super.init(handler);
    m_handler = handler;
    // get the forms applet handler
    m_applet = m_handler.getApplet();
    // initialize cookie domain to the same domain that runs Forms
    // Services
    FormsURL = m_applet.getDocumentBase();
    _host = FormsURL.getHost();
    _port = new Integer(FormsURL.getPort()).toString();
    _protocol = FormsURL.getProtocol();
    public Object getProperty(ID p0)
    if (p0 == pGetHost)
    return _host;
    else if (p0 == pGetPort)
    return _port;
    else if (p0 == pGetProtocol)
    return _protocol;
    else
    return super.getProperty(p0);
    To get the port number you call
    VarcharVariable_Port := get_custom_property('beanblock.beanname',1,'GET_PORT');
    for the hostname
    VarcharVariable_Host:= get_custom_property('beanblock.beanname',1,'GET_HOST');
    Frank
    Ps.: just wrote the bean on the fly, without testing - but I am positive that it works as similar functionality works for me in other beans.

  • Getting host, port from the tnsnames.ora with the service name

    Hi.
    I think that I asked a similar question yesterday. I want to ask if there is a way to get host and port from the tnsnames.org with a given service name. Somebody answered it for getting SID in the sqlplus. so I tried it in a similar way, but it didn't work.
    I have a service name, but I don't know how to get host and port. I know that I can parse the tnsnames.ora file to get it, but if possible, I want to use the more official and safe way.
    I'd appreciated if somebody knows it.

    caesarkim wrote:
    Hi.
    I think that I asked a similar question yesterday. I want to ask if there is a way to get host and port from the tnsnames.org with a given service name. Somebody answered it for getting SID in the sqlplus. so I tried it in a similar way, but it didn't work.
    I have a service name, but I don't know how to get host and port. I know that I can parse the tnsnames.ora file to get it, but if possible, I want to use the more official and safe way.
    I'd appreciated if somebody knows it.Oracle RDBMS does not require SQL*Net to operate.
    Oracle RDBMS does NOT now or care about content of any tnsnames.ora file.
    Realize that each (remote) user can have their own personalized copy of tnsnames.ora
    The content of tnsnames not NOT have to reflect any reality.
    I could post the content of my tnsnames.ora & it would be useless to everyone reading.

  • Change port from 8443 to 443 on jakarta-tomcat 6

    Hi all,
    How can I possibly change the SSL port from 8443 to 443? The default was 8443 and it works fine with that.I've tried to set it to port 443 at the connector tag and all redirectPort in server.xml. However, when I tried to access https://localhost/ it shows Page could not be displayed. I am currently running java jdk 1.6 on jakarta-tomcat 6. Is there any additional settings which I've left out? Thanks in advance..

    Hi, csyms and welcome to the forums
    Download a PDF of the Online Help for Adobe RoboHelp Server 9 and search for the sub heading "Set up Tomcat for HTTPS".
    You'll find the PDF here:
    http://help.adobe.com/en_US/RoboHelp/9.0/RoboEngine/robohelpserver_9_help.pdf
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    Evergreen, Colorado
    www.showmethedemo.com

  • No Port Available from the port range

    Hi, Im getting "no port available from the port range" for the default_group/home/default_group process when I attempt to start opmn. I changed the port no through the application server control panel, and now I cant start opmn to change it back again! Could anyone tell me how to go about changing it back please?
    The error report looks like this:
    There are some errors while stopping the following components. Refer to the generated error report for more details.
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:no port available from the port range
    ==================================================
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:failed to start a managed process after the maximum retry limit
    ==================================================
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:no port available from the port range
    ==================================================
    ==================================================
    ias-component: default_group
    process-type: home
    process-set: default_group
    Error Message:no port available from the port range
    ==================================================
    Can anyone help?

    See the Oracle Application Server Administrator's Guide. Here's a link for the 10.1.2.0.2 version of the book:
    http://download-west.oracle.com/docs/cd/B14099_19/core.1012/b13995/ports.htm#i1038905
    Helen

  • How to revert p4 port and telnet port from 50204 to default?

    Hi,
    i changed the p4 port and telenet port to 50204 using Visual Administrator. Now Visual Administrator and the J2EE server are both down. Is there some way I could revert back my ports to the default ports?
    Also, my J2EE dispatcher process is down with an exit code of -11113. Could someone let me know how to change the port settings for telnet and p4 please?

    Hi,
    You can do this through "ConfigTool". It is a offline tool and comes handy when JAVA system is down. It requires only database up.
    Start configtool.ba from the directory "<Drive>:\usr\sap\<SID>/JC01\j2ee\configtool.
    Then select the node Cluster Data->Instance_<No.>->Dispatcher_ID<No.>->
    1). P4->Local Properties
    In the port you have to mention 5<instance no.>04
    if you instance number is 01 then it should be 50104
    2). telnet->Local Properties
    in the port you have to mention 5<instance no.>08
    if your instance number is 01 then you have to mention 50108.
    Then try to restart the JAVA system.
    Best regards,
    sheo

  • How to separate perticular column from multidimensionl array

    dear all,
    i am just reading CAN bus message, problem is that it is accomodated in a 11X7 array which includes frame time stamp, ID, byte length etc but i am interested in CAN data. can anybody tell me how to separate that column from all. i want to read a column of 5 with all rows. how it is possible.

    Hello Sanjay,
    If your requirement is simply to obtain a single column from a 11x7 array, I would suggest you should do the following:
    1. Use Transpose 2D array to obtain a transposed array
    2. Use Index Array function to retrieve invidual row (which is actually the column of non-transposed array).
    Use index value of 4 (zero indexed), and the output would be a 1D array containing all elements of column 4 (zero indexed) of the original array.
    I hope this helps.
    Regards,
    Navjodh

Maybe you are looking for