Is it possible to set up a document larger than my printer is able to print in Indesign?

I have a printer that prints no larger than A3 but need to create an A1 document which I will get printed elsewhere.
In changing the page sizes, Indesign only gives me the size options that are compatible with my printer. Is it possible to create a document larger than these sizes?
Jack

Do you mean the default list of page sizes that appears in the New Document dialog? Well, you are absolutely not limited to just those values. Just type in any width and height in the fields directly below the drop down list.
To quickly get the correct values for A1, select "A3" size -- the Width and Height fields change to the correct values for this -- then type in "*2" in each of the fields and "enter" this using the Tab key, rather than pressing Enter.

Similar Messages

  • Is it possible to set up a Pc to Mac networking printer?

    I just bought a nice printer for my family's house. My mom asked my to hook it up (me being the computer guru). I semi-recently got a Mac Book Pro (because of cource Mac are better than PC's) Anyway, this printer is hooked up to the PC downstairs because the PC has the router that sends the internet to me and my sister's laptops. Since my sister has a PC, I easily conneced her to the printer. But, even though I'm pretty slick on computers) I've been having trouble connecting this one to the network. I've trie Bonjour and other programs and tricks. I dunno if I was just doing them wrong. But if anyone has any type of solution...please post back...I need help!!

    As Linc said, the answer is no.
    You would need to go back to normal WiFi mode and setup an Ad-Hoc connection if you do not have a router.

  • I need to know how to create a pdf document larger than 129 inches from MS Project 2007

    I am completely new to Adobe Acrobat Pro 9. I need to know how to create a PDF which is larger than 129 inches for use on a plotter from MS Project 2007. I have searched the Adobe support articles with no success. Any help would be appreciated.  Thank you.

    Thank you.  I have tried that but it will only let me go to 129 X 129 inches, no larger.
    Sincerely,
    Bill Stern
    NSD IT Support
    22289 Exploration Drive
    Suite 305
    Lexington Park, MD 20653
    Phone: 301.862.4577 ext 10
    Fax: 301.862.9828
    Email: [email protected]

  • Setting up document for two-colour printing

    I'm creating a document that will be printed using two colours: black and a Pantone ink. In the Swatches panel I have deleted all the swatches except for Black and my Pantone colour (and obviously None, Paper and Registration are still there). I have also created some mixed-ink swatches based on the black and Pantone colour.
    I notice, however, that the Ink Manager still displays Cyan, Magenta and Yellow as well as the Black and Pantone. Acrobat's Ink Manager does the same, depsite the Preflight showing that it only produces two plates. (In the Output Preview, only the Black and Pantone channels show coverage, but the crop marks show on all five channels.)
    Should I be concerned? Is there a way of setting up a document for two-colour printing that I've missed?
    Any advice would be appreciated.

    The ink manager is not a problem, bu the mixed colors potentially are, depending on the press being used. Some small 2-color presses use a single blanket and mix the ink on the blanket for overprints (which is what mixed inks are), creating a path for cross-contamination of the inks that can muddy the colors all around. You might want to verify that this will not be a problem on your job.

  • Set SGA maximum size larget than it's component

    Dear all,
    I want to activate the DISM in Oracle 10g on Solaris container, therefore I need to set the parameter sga_max_size larger than it's component.
    From my understanding, below are the sga components parameter and the current value on my system::
    SHARED_POOL_SIZE (560M)
    LARGE_POOL_SIZE (0)
    JAVA_POOL_SIZE (32M)
    DB_CACHE_SIZE (560M)
    STREAMS_POOL_SIZE (0)
    The thing is, my sga max size parameter (1168M) is already larger than above parameters.
    Is there another sga component I've missed ? Plz advice. Thanks.

    Hi,
    SGA: The size is determined indirectly from the size of the contained memory areas.
    – 1) Buffer pool: DB_BLOCK_BUFFERS (unit: blocks) or DB_CACHE_SIZE when you use the dynamic SGA
    2) – Shared pool: SHARED_POOL_SIZE
    –3) Java pool: JAVA_POOL_SIZE
    – 4) Large pool: LARGE_POOL_SIZE
    –5) Streams pool (Oracle 10g or later): STREAMS_POOL_SIZE
    –6) Redo buffer: LOG_BUFFER
    In addition, in the context of the dynamic SGA , you can define parameter
    SGA_MAX_SIZE, which sets an upper limit for the total size of the SGA. In
    general, you can only increase the size of parameters, such as DB_CACHE_SIZE
    or SHARED_POOL_SIZE, up to the size defined by SGA_MAX_SIZE.
    Thanks
    Sunny

  • When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

    When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

    There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
    To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
    The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
    1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
    2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
    3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
    3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
    4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
    5. Insert the Filename (Short) variable in that text frame.
    6. Repeat steps for all files to be included in the bookmarks.
    When creating the PDF bookmarks, select only the paratag used for the invisible colour.
    Don't forget to toggle the View to be invisible (i.e. <esc> v 1  - this also works at the book level for all files in the book).

  • Is it possible to set up a HP Scanjet 8200 series (8290 with ADF) Intel Mac

    Is it possible to set up a HP Scanjet 8200 series (8290 with automatic document feeder) on the new Intel based Mac Pro desktop computer (nehalem 2.93 dual processors, 8 core)? Can anyone please steer me in the right direction -- I tried one of the drivers from the HP website and the install reflected that it does not work on intel based computers. Does OS X Leopard come with some type of utility to help me set up the scanner (I don't see where to set it up)? Thanks.

    Hi Nicky,
    Yes,  you can download and install the software.  Yay!
    HP Deskjet 3050A e-All-in-One Printer series - J611
    Select your printer from the list ...
    Find and open the pdf document titled:
    Install Full Feature Software - Printer
    Good Luck!
    Click the Kudos Star!
    It is a great “Thank You” for the Experts who offer to help!
    Kind Regards,
    Dragon-Fur

  • Setting up "in-document" hyperlinks based on database fields, not URLs

    Hi there,
    Does anyone know whether or not it is possible to set up a Crystal report so that certain fields are presented as hyperlinks to nominated fields?
    This is what I want to do:
    In an index-style document, I have a top level value that is accompanied by several related values. For the related values, I want hyperlinks to be displayed so that the person browsing the report can jump to the top level value entry for the related value.... like this...
    Top level value: DOGS
    Related values...
    Broader Value: Mammals (hyperlinked to jump to entry for "MAMMALS")
    Narrower value: Poodles (hyperlinked to jump to entry for "POODLES")
    So, where the above entry for "DOGS" appears, I want Crystal to put in a hyperlink on Mammals and Poodles so that the reader can go straight to the entries for these related terms, for example, if someone clicks on the hyperlink for Poodles.... they will be taken to the top level entry for Poodles... etc. etc.
    Top level value: POODLES
    Related values...
    Broader value: Dogs (hyperlinked to jump to entry for "DOGS")
    Narrower value: Miniature Poodles (hyperlinked to jump to entry for "MINIATURE POODLES")
    etc. etc. and so on...
    Basically I am hoping and imagining there is a way to do this without sitting down and manually bookmarking these entries. This is something that I could do reasonably easily in Word using Styles, however that would require first exporting the data... and I really want to be able to do it straight out of the database, in Crystal.
    Anyone know the answer to this?
    cheers
    -karenb

    I think you can try two ways
    1) create a group on the field DOGS and place the related values in the details section.
    Now right click on the detail section and go to section expert and write the suppress condition like this
    DrillDownGroupLevel=0
    Now when you refresh the report it will show the data like this
    DOGS
    MAMMALS
    POODLES
    When you double click on Dogs it shows the related details of DOGS in a seperate tab.
    2) Try to create a subreport that shows the related details and insert this subreport as an on-demand subreport in the main report.This subreport should be placed in the group headers of DOGS field and change the caption of the subreport by right clicking the subreport and go to format subreport and in subreport tab add the field (DOGS) corresponds to caption by clicking X+2. Now link the subreport and main report with the grouped field in the main report using chnage subreport links option
    Hope this helps!
    Raghavendra

  • ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"

    Hello,
    I'm doing some tests with ChaRM, Normal Change scenario.
    As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
    1) Developers perform the correction in DEV and release their TASKS of the transport request
    2) Developer Lead set the Normal Change document status to "to be tested"
    3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
    4) Change Manager set the Maintenance Cycle status to "Test"
    5) Tester performs the test into QAS
    6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
    According to the following SAP Portal article, it seems to be correct:
    http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
    During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
    Warning Message Details Status was reset by system
    Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
    Warning Message Next status cannot be set because some actions cannot be executed.
    Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
    Question: Is this the correct behavior or am I missing customizing?
    Thanks in advance for your help.
    Daniel

    Hello Vivek,
    Thanks for your reply.
    It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
    Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
    But OK, that's how it is.
    Regards,
    Daniel

  • Is it possible to export a scanned document from pdf to Word in Czech language?

    is it possible to export a scanned document from pdf to Word in Czech language?

    Hi pascaldu,
    Did you choose Czech as the language for OCR? If not, please follow these steps:
    Choose File > Save as Other > Microsoft Word > Word Document in Acrobat.
    Click Settings at the bottom of the Save As dialog box.
    Click Set Language.
    Choose Czech from the Primary OCR pop-up menu, and then click OK.
    Click OK again, and then click Save.
    Please let us know how it goes.
    Best,
    Sara

  • Is it possible to set the default colours in the swatches palette in Illustrator CS4?

    Is it possible to set the default colours in the swatches palette in Illustrator CS4? What I mean is replace the swatches default colour palette with my own, so that each time I create a new document it comes up with my colours rather than Illustrators.

    You might also consider using color groups with Illustrator. Let me know what you think. It may help you out with projects that use the same color preferences.
    Check out the tutorial here:
    http://www.adobe.com/designcenter/illustrator/articles/lrvid4019_ai.html
    Let me know if this helps you.
    Vicente Tulliano

  • Is it possible  to set purchase group in PR is optional

    Dear Guru,
    Is it possible to set purchase group in PR is optional field?
    Please advice. Thank you very much.

    Hi,
    It is very much possible:
    Follow this path:
    SPRO-Materials Management-Purchasing-Purchase Requisition-Define Screen Layout at Document Level-Double click on ME51N..
    Now double click on Basic Data, Item----
    Now in front of Purchasing group field...check the check box for Optional..and save it...
    Also you have to check
    SPRO-Materials Management-Purchasing-Purchase Requisition-Define Screen Layout at Document Level-Double click on NBB ( If you are using NBB as default Document type in PR)
    Now double click on Basic Data, Item----
    Now in front of Purchasing group field...check the check box for Optional..and save it...
    Now try..
    Cheers!!!
    Utsav

  • Is it possible to set gray scaled printing as default?

    When a user clicks on the print button in a PDF, the gray scaled printing checkbox is unchecked.
    Is it possible to set that checkbox checked when a user clicks on the print button?

    Thnx for the reply guys/girls
    The printing prefrences are set to B/W by default, other documents like word, excel, powerpoint render these settings.
    When opening a PDF document in Adobe Reader and clicking the print button de checkbox for gray scaled printing stays unckeckt.
    I tried finding a registry change by monitoring the HKCU hive, but there were no changes there if I check the option.

  • Set a preview document to print limited copies?

    Hi,
    Is it possible to set a preview (PDF) document to print only a certain number of copies after which it would then become locked (password protected)?
    Thanks in advance for any help,
    Dave

    Yes, I take your point. Once the genie's out of the bottle...
    BDAqua wrote:
    Hi Dave,
    I don't think so, I think you'd have to wrap it in some kind of Script or App that kept track of how many times it printed, but then how would you prevent them from copying/duplicating the whole thing???

  • Possible to set Preview Checkbox 'On' as Default?

    Hi there again Illustratophiles!
    I spent this morning setting up my function keys to Illy menu commands (check out Microsoft's Wireless Keyboard 1000; it works on Mac and Win and has 20+ extra configurable keys in addition to the function keys -- I'm on the Mac and use it for application launching, expose, find file, and setting function keys in multiple applications). Still can't map any tools to function keys (grumble grumble) but that is another post entirely.
    I also spent some time configuring one of my New Document Profiles, and am curious if it is possible to set all the Preview checkboxes to On as the default setting. For instance, if I am editing an existing global color swatch and want to see the results before comitting I have to click the Preview checkbox in the dialog box. Or, if I am in the Move dialog box. Or if I am using one of the Effects. It would save me some time if this is possible.
    Cheers in advance and all that.
    -g-

    Open the New Document Profile you want and uncheck the Hyphenate box in the Paragraph panel. Then save the file, overwriting the original. As for the first part, most of what you are describing are handled by .aip or plugins and are essentially a compiled software that could only be changed by the originators. Not to say it wouldn't make a good feature request.

Maybe you are looking for