ChaRM: Normal Change - Not possible to set "Successfully Tested" unless the Maint. Cycle is set to "In Development with Release"
Hello,
I'm doing some tests with ChaRM, Normal Change scenario.
As far as I know, the following steps would be the correct sequence (concerning development and test phases only):
1) Developers perform the correction in DEV and release their TASKS of the transport request
2) Developer Lead set the Normal Change document status to "to be tested"
3) In background, a Transport of Copies is created with all data previously stored in the original transport request. Then this ToC is transported into QAS
4) Change Manager set the Maintenance Cycle status to "Test"
5) Tester performs the test into QAS
6) Tester provides a valuable feedback and set Normal Change document status to "tested successfully"
According to the following SAP Portal article, it seems to be correct:
http://help.sap.com/saphelp_sm71_sp10/helpdata/en/48/db938dceba518de10000000a42189c/frameset.htm
During my tests, however, I have noticed that it is just possible to go from step 5 to 6 if the Maintenance Cycle status is set to "In Development with Release" (go a step back in the Cycle). Otherwise, I get the following error messages:
Warning Message Details Status was reset by system
Warning Message Details Action RELEASE_ALL cannot be performed during this maintenance phase
Warning Message Next status cannot be set because some actions cannot be executed.
Once I have done the Cycle status change, then it is possible to move from 5 to 6 without errors and then the original transport request is transported into QAS too.
Question: Is this the correct behavior or am I missing customizing?
Thanks in advance for your help.
Daniel
Hello Vivek,
Thanks for your reply.
It is kinda weird the steps sequence, since the Tester needs to tell the Change Manager to move the cycle's status before approving the correction done in QAS (successfully tested).
Perhaps a new action between "to be tested" and "successfully tested" could exist, in order to request the CM to perform the cycle update.
But OK, that's how it is.
Regards,
Daniel
Similar Messages
-
Changing not possible; field is read-only
Hello,
I need update Expected Value in Opportunity.
Expected Value is bound Opportunity.SalesForecast.ExpectedRevenueAmount.content.
When I try to update in adsl, "Changing not possible; field is read-only" error appears in frontend to the user.
Thanks!Hi Rodrigo Mathias,Not an answer to your post just to share my problem
Seems Opportunity has a lot of problems. As in my case i am trying to code in BeforeSave method that when ever the opportunity gets create by code i have to poppulate my CUSTOM Invonved Party ( i have created custom party role ).
And i have passed partykey.partyId.content and RoleCode but when i click on save it gives me the error about Role Category!
now when debugged that all Parties ( i debugged and checked whole collection) had the Role category every party from that collection had the Role category associated!
So i tried to add r
ole category by code! but that is also public write access set as FALSE!
So finally i again opened the book for clod , and a line is specificaly written that PartyID node will not be used after 1402 there will be separate node PartyNAme where u can pass partyid , name or email!
but unfortunately that is also not available in the opportunity BO!
So i am also kind of stuck!
Btw one thing i would like to mention is when u try to maintain your custom role in opportunity manually it works and data gets saved!
Regards,
Dhruvin -
CHARM Normal Change Project Cycle empty
Hi Gurus,
We are facing an issue in Normal Change in CHARM. The Project cycle and current phase is empty (not auto populated) when we select Normal Change in Scope assignment block. It is working fine for Urgent changes. We have only one project active for both urgent and normal changes. Normal change works fine in CHARM development system. Can anyone please help me getting this fixed ?
Current "phase is Development with Release". We are using Normal Change for the first time in production.Hi,
Please see the screenshots of task list and project cycle (in web ui). We never closed our project cycle till now. We use Urgent changes regularly but our plan is to roll out normal changes now. Also, I noticed we have different number range mapped for normal change in production but not in development. Does that causes this issue ? -
Document being distributed no changes not possible and btadminh could not be locked
Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh -
Creating an index: it's not possible to select a tablespace for the index
Hi,
we are using SQL-Developer Version 3.0.04.
When creating an index it's not possible to select a tablespace for the index. The only choice which is offered by SQL-Developer is <DEFAULT>.
The user itself has privileges on several other tablespaces - and therefore not just only on the default tablespace of the user.
Any help will be appreciated
Rgds
JHHi JH,
Well, the capability is somewhat buried in the UI, but it is there.
In the Create Index dialog ...
1. Tick the "Advanced" check-box in the upper right-hand corner.
2. Select "Properties" from the left-hand list (Definition, Properties, Partitions, DDL).
3. Click the Storage Options... button
4. Use the drop-down list to select the desired tablespace.
Return to (2.) and select DDL to see that your tablespace choice is present.
Regards,
Gary
SQL Developer Team
Edited by: Gary Graham on Mar 7, 2012 5:06 PM
And if all you see in the drop-down list is <DEFAULT>, then I would suggest rechecking the user's privileges. Or provide more details about your environment: OS / Database / JDK version, and so on. -
Hi All,
Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
Thanks & Regards,
AllenHi All,
Have you come across any scenarios where the Payable status is being set as SP and the TL_PYBL_REASON_CD is being set as Payroll not Processed (PNP) in Peoplesoft Time and Labor 9.0 application?
Thanks & Regards,
Allen -
In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
Ios7 no call decline option when its locked battert drains fast music is not able to controlled through headset unless the music app is open please fix these bugs
if they are unable to update all languages in a normal time gap (it is now 6 months ago they released firmware 4.22 for the first product code (actually mine and maybe a few others)), they should not offer those many versions. the huge bug with out of memory in nokia navigator with firmware 3.58 is not fixed yet for those people. really absolutely not acceptable.
besides that, currently my phone is in a nokia service center, microphone doesnt work anymore (the one who i call just hears a very loud noise). my brother got the same phone, his one is in nokia service center since 2 weeks now, because it doesnt charge anymore as there seems to be a connection broken inside the phone).
well that will be fun if the phone returns (approximately 4 weeks), as I guess the phones will have new IMEIs as they will send 2 new phones and not fix the problem (would cost them more). but as i got a western europe with nordics-map licence locked to the imei, the next problem will be there after I get a nokia 6110navi with another IMEI back. i get really upset with this really slow support. -
MR21 price change not possible
Dear pal,
I have a material code X with valuation type RM_IND
In material master accounting view1- Price determination is 3 with price control S.There is some stock of material with some value.
I am trying to change the price in MR21.
System prevents me from proceeding price change for X RM_IND not possible.
There are pending PRs and POs.
How to go about ?
thanks
v balajeeHi
Standard price u hv selected for ur material. This can be changed in MM02 iteself.
Regards,
Raman -
Not possible to run CodedUI tests on Windows 7 embedded
Hi all,
I am trying to get my CodedUI tests running on the target machine with Windows 7 Embedded.
For that, I installed on the target machine:
Visual Studio 2010 Test Agent
VS2010 SP1
Next I try to run the CodedUI test from the command line using mstest.exe (since no Visual Studio may be installed on target
machine). However, before even executing the first line of code in my test, mstest fails after showing a popup window with following message:
"the ordinal 459 could not be located in the dynamic link library urlmon.dll"
When looking in the detailed logs of QTAgent32.exe I see a 'System.BadImageFormatException' thrown by the PluginManager of CodedUI when trying to
start an Internet Explorer plugin. See detailed stacktrace below this message.
This might be caused by the fact that this Windows Embedded installation does not contain Internet Explorer (for security reasons). The CodedUI test
and application under test however do not need Internet Explorer at all, the application is a WPF application.
So, my questions:
- Does anyone know how to get rid of this error without installing Internet Explorer?
- Any ways to prevent MsTest.exe to start the IE extension for a CodedUI test?
Some things I tried already but did not bring success:
- Run a completely empty CodedUI test; it triggers the same error.
- Remove IE extensions from C:\Program Files (x86)\Common Files\Microsoft Shared\VSTT\10.0
- Remove unneeded things (datacollectors) from MsTestSettings file.
Any help/ideas appreciated!
Jan Lavrijsen
Complete stack trace:
Agent: adapter run thread for test 'CutPowerDuringImport' with id 'b7c688eb-89ac-4654-b638-a5699f579871'
»DebugInfo
»Trace »FirstChanceException
»FirstChanceException 'Microsoft' causing 'System.BadImageFormatException' - Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 800700b6 The operating system
cannot run . (Exception from HRESULT: 0x800700B6).
»[CausedBy=Microsoft],[FirstChanceException=System.BadImageFormatException],[Count=1]
»CallStack: at Microsoft.VisualStudio.TestTools.UITest.Extension.IE.IETestPlugin.StartSession(System.Boolean recordingSession) [IL: 0x19][Native: 0x4B]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestPluginManager.StartSession(System.Boolean recordingSession) [IL: 0x2B][Native: 0x95]
at Microsoft.VisualStudio.TestTools.UITest.Framework.UITestService.StartSession(System.Boolean recordingSession) [IL: 0x34][Native: 0xA9]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.StartSession() [IL: 0x37][Native: 0x6C]
at Microsoft.VisualStudio.TestTools.UITesting.Playback.Initialize() [IL: 0xB5][Native: 0x163]
at Microsoft.VisualStudio.TestTools.UITesting.CodedUITestExtensionExecution.BeforeTestInitialize(System.Object sender,Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs e) [IL: 0x3C][Native: 0x76]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecution.RaiseBeforeTestInitialize(Microsoft.VisualStudio.TestTools.UnitTesting.BeforeTestInitializeEventArgs args) [IL: 0x15][Native: 0x17]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.RunInitializeMethod() [IL: 0x3E][Native: 0x96]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.ExecuteTest() [IL: 0x8D][Native: 0x113]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter.Execute(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestResult result) [IL: 0x46][Native: 0xD1]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.ExecuteSingleTest(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestExecuter executer,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext
testContext,Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestAdapterContext userContext,System.Boolean isLoadTest) [IL: 0x27][Native: 0x55]
at Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestRunner.Run(Microsoft.VisualStudio.TestTools.TestTypes.Unit.UnitTestElement test,Microsoft.VisualStudio.TestTools.Execution.ITestContext testContext,System.Boolean isLoadTest,System.Boolean
useMultipleCpus) [IL: 0x109][Native: 0x32B]Hi Jan,
Thanks for your response:)
I think it is a good feedback for this issue, but as far I know, it is by design now, we need to use the IE extension for test projects. My understanding is that it would find the accordant UI Test Controls with your app UI controls, so it would search all
test controls include the IE controls, and then use one real UITestControl to instantiate an object which is equal to the real UI control, so we could playback the recorded action.
WinButton uICloseButton = this.UISnippingToolWindow.UISnippingToolTitleBar.UICloseButton;
But I think you can submit this feedback to Microsoft Connect feedback portal:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx,maybe
Microsoft engineers will share us a more plausible explanation.
Thanks for your understanding.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
My iMessage will not use wifi to send messages unless the phone is on Airplane mode
I cannot send or receive texts at home because there is insufficient service at my house so I use iMessage over wifi. The issue is that when I am on wifi and out of service the phone will not send iMessages or texts over wifi unless the phone is in Airplane mode. Does anyone know how to make wifi the default iMessage so that I can send iMessages over wifi without going to Airplane mode? It tries to send them but it acts as if there is no service when I have full wifi and as soon as I switch to Airplane mode and keep wifi connected, all messages send fine.
Do the basic troubleshooting steps, as needed, described in the User Guide, Appemdix B: restart, reset, restore using a backup, restore as new.
-
Sale order plant change not possible
dear sir,
we have set valuation level is a plant in OX14. we have two production plants 1010 and 1020
we are using variant configuraion also.
we are unable to change the plant from one plant (1010) to (1020) other in sale order VA02 if we have
1) ProForma-Order
2) Order BOM
3) Cost run
Retaining above things how can we change the plant in sale order
please give some details to solve this problem
thanks and regards,
srinivasHi
Guess the changes are not saved. Could you see the changes recorded in the sales order - change log (Menu-Environment-Changes).
Please check again which plant is there in that particular sales order item.
Thanks,
Ravi -
DSL contract changes not possible since FIOS is available?
I've been a Verizon DSL customer for 4-5 years. Only the 1.5Mbps is available to us. FIOS became available shortly after I signed for DSL. For the past year (or 2?), I've been considering moving out of state, as a result, I've been on the monthly plan (~$39/month). Yesterday I called Verizon because I wanted to see what the current DSL prices were (768Kbps service and the yearly price for the 1.5Mbps service) and if maybe the 3Mbps service had become available. To my surprise, I was told that I could not make any change to my DSL service since FIOS was available..... Now, I would love to need FIOS, but I can not justify the price for that cool toy when I don't even benefit from/use in full the 1.5Mbps DSL service....
Is this everybody's experience? Is that a new move for Verizon to try to pay for the fiber optic infrastructure they laid down? I mean, this is not something I asked them to do.... I'd rather have them go with faster DSL speed instead of fiber (that's what they have in other countries, ADSL 20 or 30Mbps) rather than not provide me a choice.... I've been a loyal customer and feel cheated. As much as I hate it, I'll have to look at what the cable company now offers since every dollar spent counts.
I'm probably a bad customer for all players involved (cheapest phone service, cheapest TV service, not cheapest DSL service).When I moved in Auguest I had no problem getting the current DSL at my new place. I flat out told them if they said I had to have FIOS I would go to Comcast. Maybe you got someone new or something. I would try again. If you don't get the answer you want talk to a supervisor and if you still don't get the answer you want they have a line for people who have been unable to resolve issues through those normal channels. It is in the phone book. I have used it before. Good luck. I hope you are able to work it out.
-
Material description change not possible after MM12 &MM13
After unicode & patch upgrade , i am not able to change material description in BAsic DATA1 of material master .This changes are done by running MM12 & MM13 tCode. Can anubody help me why i am not able to change material description of material after running MM12 & MM13
Hi,
MM12 & MM13 are scheduled changes it will not change immediately , Pl.s scheduled the materials with proper chnages then check the changes after schedule date .
Could you explan me why you are using these codes for Description changes ? is there any specific requirement
Thanks
sekhar -
I did not know that when I created a e-mail address that I was suppose to use the same one that I created when I first signed up with Apple I phone. I want to change my e-mail address to the one I first had How can I change it? I do not need two e-mail accounts It should have read that when you are setting up an e-mail address use the one that you first signed up with. Not after you go through all the set ups for I cloud it tells you at the end to use your account that you first started with. Can you please help me I am new at this and I still can not set up on my computer with my phone to I cloud so if I had my phone stollen I can find it I also have and I pad to set up yet It is 3 days and I still can not set it up
Thank You and Hoplefully I can change my e-mail address so I can have everything on one accountIf you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.
Maybe you are looking for
-
My ITunes will not open and gives me error 10013, older macbook but just reformatted....HELP PLEASE!!!
-
HT5622 how can i deattch cerdit card with my apple id
pls let me know how can i deattach my credit card with my id
-
I am getting the following error while installing the data log
ging Superisory control toolkit the error is "if you have just converted to a new version of labveiw a new version of TAg engine may be required" how do i fix this error is there any upadate for fixing this error . the version i am currently using is
-
Loaded external swfs with transitions
I need help getting my loaded swf files to play the "out" transition before the next movie loads. I have a main swf with 5 buttons (movie clips) that load external swf onto the stage. package import flash.display.MovieClip; import flash.displ
-
Help Required - File to Proxy (Performance Issue)
Hi All, One of my file to proxy scenario is taking 3 to 4 days to execute. Basically XI picks up a file of 2-3 lakh records and pushing it to SAP via ABAP proxy. On the ABAP side, a BDC call is made to process the data. But the whole scenario ta