Is it possible to show a product as 'sold out' on my site, rather than hiding when out of stock?

Hello,
I am hoping to find a way to show a product as being 'sold out' on my site-- as I have it set up now, the product will be hidden when the inventory gets to zero. Or, I can leave it unhidden, but then there's no indication that the product is sold within the catalog or in the product listing. Is there a way that I can have something that says 'SOLD OUT' show up instead, both in the catalog and in the individual product listing?
Thanks for your help!
best,
jessica

Hi Mario 
Thank  you for responding to my post - I have changed the code to the following but 'targeting a class' is new to me and struggling to find a good tutorial on how to achieve this (that I can understand, I can do basic CSS but this is new to me) I am sure it is obvious to you what I am doing wrong but I can't see the wood for the trees any advice would be really appreciated - thank you 
I have changed the code to below: but still not achieving 'SOLD' when the product is out of stock 
more views
{tag_poplets,3,84,84}
    <div class="stock" id="sold">
      <p class="price"></p>
      <p class="price">
Choose
Qty
{tag_buynow,Purchase Now}
    Request Assistance
Additional Information Request
Send an email</li>
    </ul>
    </div>
    </div>
<script

Similar Messages

  • How can I show the name in the list of new messages rather than the address

    I have noticed something weird in Apple mail. In the list of new messages, the FROM field sometimes shows the email address rather than the name of the sender (even if that sender is in my address book). Because of this, when I search for some users, I can search by name but for others I must search by email address. However, in the FROM field when I actually open the message, the full name is always in the field rather than the email address (if the contact is in my address book at least).
    Here's a screenshot that illustrates what I am talking about.
    http://img94.imageshack.us/img94/8126/applemail.jpg
    (notice that in the message list it says from [email protected] but in the message view below, it says from Tony XXXX
    My question is: Is there any way to display the actual name in the FROM field in the list of new messages rather than the email address, in the same way it is displayed when I actually open the message? I can't seem to find any settings that fix this.

    Yup, no longer an option.
    Leave feedback for Apple about the feature here:  www.apple.com/feedback

  • Is it possible to use bootcamp to install windows on a flash drive (rather than an HD partition)?

    I would like to run windows on my Mac preferably from a flash drive, or an external drive. I don't want to install it locally because I don't have enough HD space. I've found a few sites and videos that show you how to do this from a PC (like this one http://www.youtube.com/watch?v=vh-F6dcXmsE) but I don't have a PC and I'd like to know if it's possible to use bootcamp to accomplish this.
    Thanks very much for any help! Would be greatly appreciated.

    If you have Windows-to-Go, it can be installed on an external disk, otherwise Windows licensing restricts it. Bootcamp has additional checks to enforce such licensing.
    You can always install it on an internal drive first and then put the drive in a USB enclosure.

  • Why is my image showing up as a clip of 8 repeating images, rather than a single image?  It does not show up 8 times in the movie, only in the editing screen as a clip with torn edges.  This hasn't happened before.

    In the past, when I moved an image from the frame where I would store all the media I may want to use in a particular project, to the upper frame where you create the project, the image would only show up as a single frame.  Now, it is showing up and looking more like a video clip, repeated 8 times and with a "torn edge" at the end.  When I play the image, it only shows up a single time.  I am not able to edit each frame individualy.  The Ken Burns icon only appears in the upper left corner of the first image.  I must have accidently changed a setting somehow, but don't remember doing this.  While the quality doesn't seem to be affected, it is taking me much longer to go back through the images and crop/fit them. 
    I am using imovie '08 and would consider myself an extreme novice. 

    I should clarify, when I meant I can only edit the first image, I don't mean only the first image of the project, but rather the first image of the 8 repeats. 
    I should also add that the project didn't begin this way.  I added enough images and then put the first song on.  When I started adding the photos that would be shown as the next song played, that is when they showed up as repeats of 8 AND all the previous images did the same.  That is why I am thinking I changed a setting when I added the music, but if I did, it was done accidentally and I can't seem to back track and find what I did.

  • Is it possible to receive answers in a completed form like a pdf rather than a database?

    This may be a rather odd question, but a client would need to receive answers in a format that can be saved as a record. For example if the user were to fill in the form on paper there would be a hard copy of the questions and their answers. Would this be possible with FormCentral? Could this be received as an attachment in a notification?

    I don't know if it is the best solution but you could filter the results to just that client's answers on the summary tab and then PDF that.

  • Is it possible to have a button that will insert a table row rather than add it to the end?

    I have an add row button that works correctly using addinstance, but I would like to have the add row button at the end of each row so a user could insert a row into the middle of existing/fiilled out rows.  Is this possible?  I would like to be able to do this using Formcalc as that is what all of my scripting in the form currently is.

    Hi,
    Yes, it is possible, but in effect what the script does is add a new row at the end of the table AND then move the row up to the approrpiate position.
    See the examples here: http://assure.ly/gk8Q7a. Table 5 is a Table object, whereas Table 6 is built using subforms. In both cases the Index number is a button, that adds a row below the existing one clicked.
    See does that help,
    Niall 

  • My wife's phone became mine, but it shows her icloud account rather than mine when it was restored, how do I correct?

    My wife's phone became mine when she got the iphone 5.  We reset the phone and I restored it off my PC, but it held her icloud id so mine is not showing up.  How do I change it to mine?  I can't see any way to logout and relog in under my info?

    This is with iOS6 on iPhone.
    Go to Settings > iTunes & App Stores.  Click on the Apple ID field & it should give the choice to sign out.  Then sign into your other Apple ID.

  • Is it possible to use the drawing dynamic content to erase an image rather than draw over the top?

    I'm trying to create a cover for my magazine  that has a chalk board with writing on. I want the user to be able to erase the writing with their finger but can't figure out how to do it. All i can do is draw a solid colour over the top. What i want is for the finger swipe to erase the .png image instead. wondered if it can be done using a mask but I can only get a mask to reveal solid colour not an image.

    If the images are exactly the same size then make sure the layer with the mask
    is the active layer and in the other documents go to Select>Load Selection and choose
    your document with the layer mask under Source document and under channel choose the layer mask.
    After the selection loads press the layer mask icon at the bottom of the layers panel.
    MTSTUNER

  • On a canceled appointment can I configure so that it shows with a line through, rather than disappearing, when I accept the change?

    When my assistant deletes in her outlook, it comes as a notification that the appointment is canceled, with the option of accepting the update.  If I don't accept the update, there is a line through the appointment, which I like.  If I do, the appointment disappears.  I would like to still have canceled appointmnents but with lines through.

    Never mind. I figured it out what was causing the split of each disc into a different audiobook: The title of each track had the separate disc numbers and that made it appear as if it was a different book. Once I changed the title of each track to reflect the book's title without the disc number, the different tracks all merged into one audiobook in the audiobook section of iTunes.

  • I downloaded iOS 6 and now cannot access my iBook downloads. They show up on the library but close the app rather than open the item.

    I am not a savvy user and am wondering if this is a glitch in the new operating system or if there is something I need to do now that the new operating system has been installed.

    I am not a savvy user and am wondering if this is a glitch in the new operating system or if there is something I need to do now that the new operating system has been installed.

  • Is it possible to link iMessage for the mac, to a phone number rather than email address?

    Hi All
    I would like imessage for the MAC to be synced with my phone number, so that the person im sending two does not receive two seperate threads?

    Just go to contacts and add their info and put their phone number in and not their email.

  • How can I tell that an individual product is installed rather than being a part of Creative Suite?

    Dear All,
    Sorry if this question is not appropriate for this forum, but I could not find a better one.
    When I inventory a computer's registry, how can I know that the individual product (such as PhotoShop CS5) is installed, rather than installed as part of the product suite, such as Creative Suite CS6?
    Kindest regards,
    QuietLeni

    Mylenium,
    Is this true for ALL versions of the Adobe Suites or just the latest ones?
    I seem to have a computer which is showing up in the list of machines with CS5 installed and in the list of machines with PhotoShop CS5 installed.
    Kindest regards,
    QuietLeni

  • Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?

    Is it possible to show a 'My Activity' web part on a SharePoint site if 'My Sites' is not available?
    For example, say there's a SharePoint installation dedicated to particular (custom) SharePoint site. The users go to the site to carry out their tasks. There's no 'My Site' set up in this installation (and for other reasons I'm told it's not an option).
    Is it possible to show a web part here that shows the user's recent activity? The built-in web part for this fails with the error 'Invalid URI: The URI is empty', and the details of it appear to say it's looking for the user's My Site to find out what to show:
    SPMicrofeedContext.SetMySiteHostForContext failed System.UriFormatException: Invalid URI: The URI is empty.     at System.Uri.CreateThis(String uri, Boolean dontEscape, UriKind uriKind)     at Microsoft.Office.Server.Microfeed.SPMicrofeedContext.SetMySiteHostForContext()
    So, while I'd be happy to write a web part (or app part) to display the information instead of using the default part, I'm not sure SharePoint is even storing the activity in a way I can access.
    Some pages like the following: http://sharepointmystery.com/2012/07/22/activity-feeds-in-sharepoint-2013/ make me think it won't be possible - it says: 'The major change from 2010 is that all the [activity] content is stored in the user’s personal site, not
    in a common database.'
    Are activity feeds dependent on 'My Sites' or is there a way to access the information when 'My Sites' is not present in the deployment? I can't find a definitive answer in Microsoft's documentation.

    To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
    Interesting question - thanks for that. Until now I didn't realise there was a difference.
    The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
    Many thanks,
        Geoff

  • Possible to show bottom of scrolling text first when icon is displayed?

    Hi,
    Does anyone know if it is possible to show the bottom of
    scrolling text when the display comes up? For instance, let's say
    you have 20 lines of text in a scrolling display, but it only has
    room for 10. By default, Authorware shows the top 10 lines in the
    scrolled display, not the bottom 10. I want to show the bottom
    10--is this possible?
    Thanks,
    Edwin

    Hi,
    Well, I decided to have the most current information at the
    top of the display. For instance, if it were a chat, the most
    current chat info would be on top instead of on bottom. That fixed
    the problem adequately.
    Edwin

  • I work for a retailer who sends out e-receipts as pdf attachements.  When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment.  Any ideas?

    i work for a retailer who sends out e-receipts as pdf attachements.  When the email arrives on any apple product, i see the email with the paperclip icon showing that there is an attachment but i cannot ever see or find the actual attachment.  Any ideas?

    i have scrolled left, right, up and down on iphone4, iphone5 and ipad and the attachment simply does not exist.  It has to be something with the apple mail client setup because for any mail client, if they go to the webemail thru safari, the attachment is there and it can be viewed without issue.
    I know there are plenty of people out there with this issue with the mail clients set up that you access thru the email icon on the iphone and ipad but i cannot find anyone with a resolution.  I cannot find any settings in the mail client setup that has anything to do with attachments or for what attachments can or cannot be read or seen.
    Hopefully someone out there has figured something out because this is an odd one.

Maybe you are looking for