Is it possible to use a CompactDAQ and NI-DAQmx in the TPC-2212 with Windows 7 Embedded System?

Hi,
I would like to develop a application with the TPC-2212 (Touch panel computer) and a CompactDaq System (NI9237 - 4-Channel, ±25 mV/V, 24-Bit Simultaneous Bridge Module).
Is it possible or I should use a panel pc?
Thanks.
Solved!
Go to Solution.

This thread is a bit old, but I thought it would be worth while responding (as I was wondering the same thing a day ago).
The answer to the OP's concern(s) is YES, you can install DAQmx on your Windows 7 embedded TPC-2212 touch panel device while connecting to your cDAQ hardware. YES, it will function (depending on your memory constraints). DAQmx BASE is NOT a requirement (which, to me, seems very ambiguous if you're referring to NI's documentation for the LabVIEW Touch Panel Module).
My confusion began when it seemed using the Touch Panel Module for the 2212 was a requirement, not an option. If one proceeds with this assumption, then referring to the TPM documentation:
http://www.ni.com/pdf/manuals/371940d.pdf
NOTE: this link above is to an older version, but the content itself (also installed locally with the TPM in \\manuals\TPC_Getting_Started.pdf) remains relatively unchanged.
Section "Installing Additional Tools" clearly states "You must install additional tools on the target depending on the functionality you need." Immediately following is the installation procedures for DAQmx Base. You'll see the same statement in the LabVIEW help files that get installed with the TPM on your development machine. Nowhere does it state, for Windows Embedded, that it's possible to use DAQmx itself.
Because DAQmx is a bit of a heavy weight, you'll probably want to go with the Runtime (with MAX) as I did:
Search for 'NI DAQmx Run-Time Engine - Configuration with MAX'. I would have posted a link, but NI's site was down for maintenance at the time of this post.
Connect to your 2212 over a network connection (I just used a cross over cable and connected directly). Create a shared directory and copy the downloaded installer on over - install. You could, of course, download direct if your 2212 is already networked with web access.
I have my test station application running beautifully with an attached (USB) cDAQ chassis loaded with a variety of modules.
I hope this post is as useful for somebody else as it would have been for me.
-Chris
Kod Integrations, LLC
Sr Software and Automation Engineer
Certified LabVIEW Architect
Kod Integrations, LLC
http://www.kodintegrations.com

Similar Messages

It is no longer possible to use ALT + N and ALT + P from the "get info" window.

On a PC, previously, when in the "get info" windows, it was possible to use ALT + N and ALT + P to switch to the song information for the next and previous song. Since the update to the newest iTunes, it's no longer possible. Has anybody found a keyboard shortcut that works? The "keyboard shortcut" thing in iTunes says you can still use ALT + N, but it doesn't seem to be working for me. Is it working for anybody else?

You're welcome.
tt2

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore

Long story short....I restored my computer to an earlier point using time machine and now all of the previous back-ups are gone. My question has to do with itunes...is it possible to restore my itunes library to the most recent backup because the restore that I did was in march and the latest backup was in may....the reason being is that there were app that i had downloaded that are in my most recent back-up, that were not in the backup I restored to. Is it possible to just restore one application ie)itunes?

See this post.
tt2

HT4145 is it possible to use a sngle air port express both for streaming music to an audio system AND as a wireless base station

is it possible to use a single air port express both for streaming music to an audio system AND as a wireless base station

Yes you can - if it is your only router or it is after another Apple router - if you have a non-Apple router then it would have to be hard wired to create its' own wireless network.

Possible to Use Radeon 4870 AND EVGA NVIDIA GTX 285 at the Same Time?

Hello,
I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
The second display maxes out at 1280 x 800 resolution.
I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the Nvidia? Can I even install both at the same time? Or should I remove the Radeon and use just the Nvidia?
FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
I would appreciate any and all help on this!
Thanks!
Charles

I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
Are you using the Mini DisplayPort to Dual-Link DVI Adapter?
<http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0Mg>
The second display maxes out at 1280 x 800 resolution.
That's the resolution the 30" will run at with a single-link DVI connection.
I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
It depends on the adapter you use.
To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
It has twice the graphics memory, so may be better if you are processing lots of large images at once.
Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the NVIDIA?
No. For only two displays, one card is better because it can handle moving windows between displays, or windows spanning both displays. With the displays on different cards, the main computer has to do more work. Even if the windows are never going to cross display boundaries, there is no way for the applications to know that, so they won't let the graphics cards do as much as they could.
Can I even install both at the same time?
No. There are only two auxiliary power connectors, and one card will use both.
Or should I remove the Radeon and use just the NVIDIA?
Try each card and see which gives the best results with your applications.
FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
The extra video RAM may give better performance with lors of large images.

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

Is it possible to use List Type in XML schema within the SOA Rule author?

Is it possible to use List Type in XML schema within the SOA Suite Rule author? The reason is that with the following XSD, Rule author generates XML facts of type "List" for the element "ResultSet". Basically I want to check the Input facts (Input1, Input2, Input3) for some conditions and then assign action to the element Resultset of type List (array). The output Resultset can contain multiple values based on the input facts. My problem is that I am unable to see the ResultSet in the "Assign" action type of the action block. Is it possible to use the Resultset of type List with the Rule author or is there any limitation on the rule author and any workaround for this?
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oracle.com/ns/TestMultipleOutputs"
elementFormDefault="qualified">
<element name="TestMultipleOutputs">
<complexType>
<sequence minOccurs="0">
<element name="Input1" type="string" minOccurs="0"/>
<element name="Input2" type="string" minOccurs="0"/>
<element name="Input3" type="string" minOccurs="0"/>
<element name="ResultSet" type="string" minOccurs="0"
maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
</schema>
--Thanks a lot

Hi Richard,
I have slightly modified the xml schema you suggested and was able to import into the rule author. the following is the modified XSD. Rule Author created a List type for the "ResultSet" . I still don't see "Resultset" in the assign action, so I tried creating RL function in order to assign the output to the "Resultset", but was unsuccessful so far. can you please let me know how to populate the resultset with the output values? Thanks a lot.
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema attributeFormDefault="unqualified"
xmlns:ns1="http://www.oracle.com/ns/TestComplexOutputs"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.oracle.com/ns/TestComplexOutputs"
xmlns:tns="http://www.oracle.com/ns/TestComplexOutputs"
elementFormDefault="qualified">
<xsd:element name="TestComplexOutputs">
<xsd:complexType>
<xsd:sequence minOccurs="0">
<xsd:element name="Input1" type="xsd:string" minOccurs="0"/>
<xsd:element name="Input2" type="xsd:string" minOccurs="0"/>
<xsd:element name="Input3" type="xsd:string" minOccurs="0"/>
<xsd:element name="ResultSet" type="tns:ResultSetType" minOccurs="0"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ResultSetType">
<xsd:sequence>
<xsd:element name="ResultSet" type="tns:ResultSetStructure" minOccurs="1"
maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ResultSetStructure">
<xsd:sequence>
<xsd:element name="ErrorReason">
<xsd:simpleType>
<xsd:restriction base="xsd:string"/>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>

HT5622 I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use my work email as the Apple ID on my new iphone. What do I do

I have just received a new iphone 5s and need to set the Apple ID with my work email. I used my work email on my personal iphone 4s to set up an icloud account and it will not let me use this email as the Apple ID on my new iphone. As it is a work phone I need to use this email address as my Apple ID. How do I do this?

when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?

Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl

Using separate_frame=true and trying to close the applet window after...

We are using separate_frame=true and trying to close the applet window (the one with the large gray box) after using the following post-form trigger:
if :system.last_form = 0 then
     message('Please wait while Forms closes - '||:system.last_form);
     web.show_document('/forms/html/close.htm','_self');
end if;
This works fine for the first form we open, but if that same form using Open_Form to open a child form we have a problem. When the child form is closed the user is returned to the parent calling form (which is expected), but then when the parent form is closed the separate applet window fails to close. Any suggestions?

I guess you mis-interpreted the value of :SYSTEM.LAST_FORM. From the online-help:
SYSTEM.LAST_FORM represents the form document ID of the previous form in a multi-form application, where multiple forms have been invoked using OPEN_FORM.So LAST_FORM shows always the ID of the last activated form, and this will never be 0 if you issued one OPEN_FORM in your application.

Hi.is it possible to add 2 columns and put it in the third calumn thru sqll

Hi.is it possible to add 2 columns and put it in the third calumn thru sqll
Hi i have 3 columns
callstart,duration and callrelease
In the extract i get values only for callstart and duration.
Is possible thru sqlldr to output the sum of callstart and duration into callrelease.

May This Can Help You..
SQL> select * from table_a;
        ID SCHEDULED MARK             PRID
         5 07-NOV-10 T05                 7
         6 18-SEP-10 T06                 8
         4 31-JAN-11 T02                 2
         1 18-JAN-11 T01                 2
         2 18-JAN-11 T02                10
         3 18-JAN-11 T03                 1
6 rows selected.
SQL> alter table table_a add mix varchar(50);
Table altered.
SQL> select * from table_a;
        ID SCHEDULED MARK       PRID MIX
         5 07-NOV-10 T05           7
         6 18-SEP-10 T06           8
         4 31-JAN-11 T02           2
         1 18-JAN-11 T01           2
         2 18-JAN-11 T02          10
         3 18-JAN-11 T03           1
6 rows selected.
SQL> update table_a
2 set mix=mark||to_char(id);
6 rows updated.
SQL> commit;
Commit complete.
SQL> select * from table_a;
        ID SCHEDULED MARK       PRID MIX
         5 07-NOV-10 T05           7 T055
         6 18-SEP-10 T06           8 T066
         4 31-JAN-11 T02           2 T024
         1 18-JAN-11 T01           2 T011
         2 18-JAN-11 T02          10 T022
         3 18-JAN-11 T03           1 T033
6 rows selected.
SQL> Regards
Umesh

HT204053 i have an used i phone and don't have the apple id how do i change it

i have an used i phone and don't have the apple id how do i change it

Any content that is currently on the phone will be tied to the account that bought/downloaded it (so you won't be able to update any of its apps or copy its content to your computer's iTunes). You can log out of the currently logged in account by tapping on the id in Settings > Store (Settings > iTunes & App Stores if it's on iOS 6) and you can then do Settings > General > Reset > Erase All Content And Settings to remove all of the previous owner's content - you can then log in with your own account on it and copy your own content onto it from your computer's iTunes

Hi when i use treeMap class and if i exit the program

hi
hi when i use treeMap class and if i exit the program,
what will happen? the information that i put in the treeMap will be disappear??
if it is like that,,how am i able to retrieve my data...when i restart my program..
once i put ID as key and put my customer information,
in it, after exit my program,, and i can't find
my customers by their ID,,,,,,,,,how can,,i solve it......

what will happen? the information that i put in the
treeMap will be disappear??Yes. Of course. If you want data to hang around you have to tell the computer. If you want anything to happen you have to tell the computer.
if it is like that,,how am i able to retrieve my
data...when i restart my program..Tada! Tell the computer. Your simplest option is to use Serialization.
Before exiting your program, serialize your TreeMap to disk. After starting your program serialize your TreeMap from disk.
First stop should be your text book to learn what Serialization is and how it works, then try to write some code, then ask us to help with any problems.
Dave.

Is it possible to use a CompactDAQ and NI-DAQmx in the TPC-2212 with Windows 7 Embedded System?

Similar Messages

Maybe you are looking for