Is it possible to use assembly language..?

is it possible to use assembly language code with the packager for iphone?

I hope we can write assembly language in XCode and not in packager for iphone. it supports flash and the script of flash AS3.0

Similar Messages

Using C functions from IA-32 assembly language

Is it possible to use 32-bit assembly language to call C functions in 64-bit linux?
Background: I'm learning 32-bit AT&T syntax Linux assembly language programming. The only reason for 32-bit is that's what's covered in the book I have. Some simple examples assemble, link, and execute in Arch 64 using GNU either gcc or as + ld -- with no changes either to code or command line flags.
The problem: I'm having trouble with C function calls. Even after replacing register names (e.g., edi -> rdi) and mnemonics (e.g., movl -> movq), I find that a program which calls printf and exit never prints anything, and never returns. Hence the question.
I can post code if needed (it's on my other machine), but this is really more of a general question -- is it possible to call C functions in Arch 64 using 32-bit AT&T syntax, and if so, how.
Thanks!

Not even a typo, just confusion. The CPU is an Intel Core 2 Duo -- so it's actually x86-64.
I realize that NASM is not GAS, but checking the NASM manual helped me figure out a few things about calling 64-bit C functions:
http://www.nasm.us/doc/nasmdo11.html
It took a while to figure out how to correctly call printf. The missing clue was here:
http://www.mit.edu/~6.035/handouts-2007 … convention
printf reads the number of variable arguments from %rax. In this example, printf is called with no variable arguments:
# c_functions.s - Calls 64-bit C functions putchar, printf, and exit
.section .data
a:
.byte 'a'
newline:
.byte '\n'
hello:
.asciz "hello, world\n"
.section .text
.globl main
main:
movq a, %rdi # used as argument for putchar
call putchar
movq newline, %rdi # used as argument for putchar
call putchar
movq $hello, %rdi # first argument for printf (i.e., the format string)
movq $0, %rax # number of variable arguments for printf
call printf
movq $0, %rdi
call exit
For simplicity, I compiled and linked with gcc (in other words, I let gcc figure out how to properly call as and ld):
gcc c_functions.s
If I can figure out how to pass variable arguments to printf, I'll post that. Based on the MIT reference linked above, it sounds like those arguments would be passed in SSE registers.

Assembly Language in Xcode

I am currently taking a Java course in college and it runs great in Xcode.
I just found out today that I will have to take an assembly language course sometime next year. I talked to the genius at my local apple store and he said that assembly language will work in Xcode, but will be different for PPC and intel macs.
However, he did not tell me how to start in assembly language in xcode. If anyone knows how please tell me and, if possible, supply some sample code for an intel mac so I can test it out.
iBook G4 14 1.2GHz, 1.25GB, iMac Core Duo 17" 1.83GHz 1GB Mac OS X (10.4.8)

There is "gas", the GNU Assembler. As a student, you can buy Borland's Turbo Assembler for $130. The more common Turbo C++, Turbo Delphi(s), and Turbo C# are now free.
A MBP with Parallels will pretty much handle anything that will run on a PC. It would be an excellent choice for any programmer.
Still, tele_player is correct. There is no way to tell what platform your assembly class may be using. Few people use assembly anymore and those that do are a little bonkers or just stubborn. You may find yourself learning assembly for the Z80, 68000, or IBM System/360. On the bright side, there are probably emulators for all of those that run on a modern Mac. On the downside, you may still have to submit your assignments on the lab machine.
It is definitely an excellent course to take. There are not enough programmers who know assembly. You will really learn a lot about how a computer runs software and how to write software.

Is it possible to use the scroll wheel of a mouse in list boxes?

Hi,
I was wondering if it is possible to use the scroll wheel in list boxes? LABview (6i under windows 98) does support the use in diagrams, for instance on case statements, but it does not appear to do much on the front panel apart from scrolling the whole thing up and down (and when pointing on the vertical scroll bar left and right).
Is there a quick and easy way to get the scroll bar to work on list boxes, for instance by calling windows dll's? If so anyone ever done this?
Any help will be greatly appreciated,
Erik van Dijk

Erik,
Yes, it is possible. Anything is possible. LabVIEW is a programming language.
However, the scope and ease of implementation may be beyond the amount of work you want to do. This must be accomplished through Windows API. This means the use of windows dlls and or Active X.
Good luck.
Also, try looking for toolkits. Someone out there supposedly has a toolkit for doing this sort of thing.

Is it possible to use an internal optical drive/ZIP drive mount from a PowerMac G4 Graphite in a PowerMac G4 Quicksilver?

Hello, All. Is it possible to use an internal optical drive/ZIP drive mount from a Power Mac G4 Graphite (Sawtooth) in a Power Mac G4 Quicksilver? Obviously, the two computers use physicly different mounts, but does anyone have any tips or hints to make this possible? I appreciate any advice.

"I may be persistent and attempt to drill holes in the correct position in the front of the Quicksilver chassis."
Unfortunately, it's more than a case of drilling a couple of holes. The modification isn't really feasible, and after you remove the front panel from the Quicksilver case, you'll see what I mean. In the Optical/Zip drive area, the Quicksilver's front chassis wall isn't cut out the same way as previous models were. Prior to the Quicksilver models, the front plastic bezel (with the hinged Optical drive door and a blank or Zip-slotted bezel) was snapped in from the front, after the front panel was installed. The chassis wall had a large opening to accommodate installation/removal of the Optical and Zip drive carrier. As I indicated before, in the Quicksilver model, the Optical and Zip drive carrier is mounted internally. This is necessary because the front chassis wall has two separate openings cut in it. The upper opening is for the oval-shaped, hinged Optical drive door (snaps into place from the interior of the chassis) and the lower opening is a narrow slot for Zip disk insertion and the eject button. To use the Optical and Zip drive carrier from a Sawtooth G4 would require cutting the Quicksilver's front chassis wall, to create an opening large enough for the carrier. In doing this, you'd cut away the metal which has (7) small holes in it, through which the hinged door assembly's plastic mounting pins are inserted to properly position and secure it in place. If you don't want to lose the use of the hinged optical drive door, including the appearance of a seamless front panel, you can't cut away that metal. If you don't care about having a permanent oval opening in the front panel in front of the optical drive, you could attempt your modification. Because the Quicksilver's optical drive typically needs to have the trim piece unsnapped from the front of its tray, I'd want to retain the front panel's hinged door bezel to prevent excessive dust from entering the drive. As I recommended before, check ebay for a pulled carrier.

Couldn't I use Chinese language in properties stream ?

Hi , everyone !
Couldn't I use Chinese language in properties ?
I use properties manage program attributes , but the value which I type in Chinese language can not load
correctly !
Why ?

Hi,
I did a lot of testing with the method of my last posting and ran into the following problem: each character, that is not available in iso 8859-1 is discarded and replaced by a '?'. So when e.g. loading arabic characters you get just "?????" as your property's value.
The only possibility to enable other encodings of Property Files is to replace the encoding of the reader to one that is better suited. So I created a customized class, that inherits from java.util.Properties, and supports loading and storing to any encoding. This class I give here:
* Properties.java
* Created on 11. Juni 2003, 14:08
package xy;
* The <code>Properties</code> class represents a persistent set of
* properties. The <code>Properties</code> can be saved to a stream
* or loaded from a stream. Each key and its corresponding value in
* the property list is a string.
* 
* A property list can contain another property list as its
* "defaults"; this second property list is searched if
* the property key is not found in the original property list.
* 
* Because <code>Properties</code> inherits from <code>Hashtable</code>, the
* <code>put</code> and <code>putAll</code> methods can be applied to a
* <code>Properties</code> object. Their use is strongly discouraged as they
* allow the caller to insert entries whose keys or values are not
* <code>Strings</code>. The <code>setProperty</code> method should be used
* instead. If the <code>store</code> or <code>save</code> method is called
* on a "compromised" <code>Properties</code> object that contains a
* non-<code>String</code> key or value, the call will fail.
* 
* <a name="encoding"></a>
* When saving properties to a stream or loading them from a stream, the
* ISO 8859-1 character encoding can be used. For characters that cannot be directly
* represented in this encoding,
* <a href="http://java.sun.com/docs/books/jls/html/3.doc.html#100850">Unicode escapes</a>
* are used; however, only a single 'u' character is allowed in an escape sequence.
* The native2ascii tool can be used to convert property files to and from
* other character encodings.
* 
* 
* This Properties class is an extension of the default properties class an supports the
* loading and saving from and into other encodings than ISO 8859-1.
* 
* @see <a href="../../../tooldocs/solaris/native2ascii.html">native2ascii tool for Solaris</a>
* @see <a href="../../../tooldocs/win32/native2ascii.html">native2ascii tool for Windows</a>
* @author Gregor Kappler, extended the class of JDK by
* @author Arthur van Hoff
* @author Michael McCloskey
* @version 1.64, 06/26/00
* @since JDK1.0
public class Properties extends java.util.Properties {
 private static final String keyValueSeparators = "=: \t\r\n\f";
 private static final String strictKeyValueSeparators = "=:";
 private static final String specialSaveChars = "=: \t\r\n\f#!";
 private static final String whiteSpaceChars = " \t\r\n\f";
 /** Creates a new instance of Properties */
 public Properties() {
 * Reads a property list (key and element pairs) from the input stream.
 * The stream is assumed to be in the specified character encoding.
 * 
 * Every property occupies one line of the input stream. Each line
 * is terminated by a line terminator (<code>\n</code> or <code>\r</code>
 * or <code>\r\n</code>). Lines from the input stream are processed until
 * end of file is reached on the input stream.
 * 
 * A line that contains only whitespace or whose first non-whitespace
 * character is an ASCII <code>#</code> or <code>!</code> is ignored
 * (thus, <code>#</code> or <code>!</code> indicate comment lines).
 * 
 * Every line other than a blank line or a comment line describes one
 * property to be added to the table (except that if a line ends with \,
 * then the following line, if it exists, is treated as a continuation
 * line, as described
 * below). The key consists of all the characters in the line starting
 * with the first non-whitespace character and up to, but not including,
 * the first ASCII <code>=</code>, <code>:</code>, or whitespace
 * character. All of the key termination characters may be included in
 * the key by preceding them with a \.
 * Any whitespace after the key is skipped; if the first non-whitespace
 * character after the key is <code>=</code> or <code>:</code>, then it
 * is ignored and any whitespace characters after it are also skipped.
 * All remaining characters on the line become part of the associated
 * element string. Within the element string, the ASCII
 * escape sequences <code>\t</code>, <code>\n</code>,
 * <code>\r</code>, <code>\\</code>, <code>\"</code>, <code>\'</code>,
 * <code>\ </code> (a backslash and a space)
 * are recognized and converted to single
 * characters. Moreover, if the last character on the line is
 * <code>\</code>, then the next line is treated as a continuation of the
 * current line; the <code>\</code> and line terminator are simply
 * discarded, and any leading whitespace characters on the continuation
 * line are also discarded and are not part of the element string. 
 * Note:
 * <code>\u</code>xxxx is not supported if the encoding is not
 * ISO 8859-1!
 * 
 * As an example, each of the following four lines specifies the key
 * <code>"Truth"</code> and the associated element value
 * <code>"Beauty"</code>:
 * 
 * <pre>
 * Truth = Beauty
 * Truth:Beauty
 * Truth :Beauty
 * </pre>
 * As another example, the following three lines specify a single
 * property:
 * 
 * <pre>
 * fruits apple, banana, pear, \
 * cantaloupe, watermelon, \
 * kiwi, mango
 * </pre>
 * The key is <code>"fruits"</code> and the associated element is:
 * 
 * <pre>"apple, banana, pear, cantaloupe, watermelon, kiwi, mango"</pre>
 * Note that a space appears before each <code>\</code> so that a space
 * will appear after each comma in the final result; the <code>\</code>,
 * line terminator, and leading whitespace on the continuation line are
 * merely discarded and are not replaced by one or more other
 * characters.
 * 
 * As a third example, the line:
 * 
 * <pre>cheeses
 * </pre>
 * specifies that the key is <code>"cheeses"</code> and the associated
 * element is the empty string.
 * @param inStream the input stream.
 * @exception IOException if an error occurred when reading from the
 * input stream.
 public synchronized void load(java.io.InputStream inStream, java.nio.charset.Charset encoding) throws java.io.IOException {
 if (encoding.equals (encoding.forName("8859_1"))) {
 super.load (inStream);
 return;
 java.io.BufferedReader in = new java.io.BufferedReader(new java.io.InputStreamReader(inStream, encoding));
 while (true) {
 // Get next line
 String line = in.readLine();
 if (line == null)
 return;
 if (line.length() > 0) {
 // Continue lines that end in slashes if they are not comments
 char firstChar = line.charAt(0);
 if ((firstChar != '#') && (firstChar != '!')) {
 while (continueLine(line)) {
 String nextLine = in.readLine();
 if(nextLine == null)
 nextLine = "";
 String loppedLine = line.substring(0, line.length()-1);
 // Advance beyond whitespace on new line
 int startIndex=0;
 for(startIndex=0; startIndex<nextLine.length(); startIndex++)
 if (whiteSpaceChars.indexOf(nextLine.charAt(startIndex)) == -1)
 break;
 nextLine = nextLine.substring(startIndex,nextLine.length());
 line = new String(loppedLine+nextLine);
 // Find start of key
 int len = line.length();
 int keyStart;
 for(keyStart=0; keyStart<len; keyStart++) {
 if(whiteSpaceChars.indexOf(line.charAt(keyStart)) == -1)
 break;
 // Blank lines are ignored
 if (keyStart == len)
 continue;
 // Find separation between key and value
 int separatorIndex;
 for(separatorIndex=keyStart; separatorIndex<len; separatorIndex++) {
 char currentChar = line.charAt(separatorIndex);
 if (currentChar == '\\')
 separatorIndex++;
 else if(keyValueSeparators.indexOf(currentChar) != -1)
 break;
 // Skip over whitespace after key if any
 int valueIndex;
 for (valueIndex=separatorIndex; valueIndex<len; valueIndex++)
 if (whiteSpaceChars.indexOf(line.charAt(valueIndex)) == -1)
 break;
 // Skip over one non whitespace key value separators if any
 if (valueIndex < len)
 if (strictKeyValueSeparators.indexOf(line.charAt(valueIndex)) != -1)
 valueIndex++;
 // Skip over white space after other separators if any
 while (valueIndex < len) {
 if (whiteSpaceChars.indexOf(line.charAt(valueIndex)) == -1)
 break;
 valueIndex++;
 String key = line.substring(keyStart, separatorIndex);
 String value = (separatorIndex < len) ? line.substring(valueIndex, len) : "";
 // Convert then store key and value
 key = loadConvert(key);
 value = loadConvert(value);
 put(key, value);
 * Writes this property list (key and element pairs) in this
 * <code>Properties</code> table to the output stream in a format suitable
 * for loading into a <code>Properties</code> table using the
 * <code>load</code> method.
 * The stream is written using the ISO 8859-1 character encoding.
 * 
 * Properties from the defaults table of this <code>Properties</code>
 * table (if any) are not written out by this method.
 * 
 * If the header argument is not null, then an ASCII <code>#</code>
 * character, the header string, and a line separator are first written
 * to the output stream. Thus, the <code>header</code> can serve as an
 * identifying comment.
 * 
 * Next, a comment line is always written, consisting of an ASCII
 * <code>#</code> character, the current date and time (as if produced
 * by the <code>toString</code> method of <code>Date</code> for the
 * current time), and a line separator as generated by the Writer.
 * 
 * Then every entry in this <code>Properties</code> table is written out,
 * one per line. For each entry the key string is written, then an ASCII
 * <code>=</code>, then the associated element string. Each character of
 * the element string is examined to see whether it should be rendered as
 * an escape sequence. The ASCII characters <code>\</code>, tab, newline,
 * and carriage return are written as <code>\\</code>, <code>\t</code>,
 * <code>\n</code>, and <code>\r</code>, respectively. Characters less
 * than <code>\u0020</code> and characters greater than
 * <code>\u007E</code> are written as <code>\u</code>xxxx for
 * the appropriate hexadecimal value xxxx. Leading space characters,
 * but not embedded or trailing space characters, are written with a
 * preceding <code>\</code>. The key and value characters <code>#</code>,
 * <code>!</code>, <code>=</code>, and <code>:</code> are written with a
 * preceding slash to ensure that they are properly loaded.
 * 
 * After the entries have been written, the output stream is flushed. The
 * output stream remains open after this method returns.
 * @param out an output stream.
 * @param header a description of the property list.
 * @exception IOException if writing this property list to the specified
 * output stream throws an <tt>IOException</tt>.
 * @exception ClassCastException if this <code>Properties</code> object
 * contains any keys or values that are not <code>Strings</code>.
 * @exception NullPointerException if <code>out</code> is null.
 * @since 1.2
 public synchronized void store(java.io.OutputStream out, java.nio.charset.Charset encoding, String header)
 throws java.io.IOException
 if (encoding.equals (encoding.forName("8859_1"))) {
 super.store (out,header);
 return;
 java.io.BufferedWriter awriter;
 awriter = new java.io.BufferedWriter(new java.io.OutputStreamWriter(out,encoding));
 if (header != null)
 writeln(awriter, "#" + header);
 writeln(awriter, "#" + new java.util.Date().toString());
 for (java.util.Enumeration e = keys(); e.hasMoreElements();) {
 String key = (String)e.nextElement();
 String val = (String)get(key);
 key = saveConvert(key, true);
 /* No need to escape embedded and trailing spaces for value, hence
 * pass false to flag.
 val = saveConvert(val, false);
 writeln(awriter, key + "=" + val);
 awriter.flush();
 * changes special saved chars to their original forms
 private String loadConvert (String theString) {
 char aChar;
 int len = theString.length();
 StringBuffer outBuffer = new StringBuffer(len);
 for(int x=0; x<len; ) {
 aChar = theString.charAt(x++);
 if (aChar == '\\') {
 aChar = theString.charAt(x++);
 if (aChar == 't') aChar = '\t';
 else if (aChar == 'r') aChar = '\r';
 else if (aChar == 'n') aChar = '\n';
 else if (aChar == 'f') aChar = '\f';
 else if (aChar == '\\') aChar = '\\';
 else if (aChar == '\"') aChar = '\"';
 else if (aChar == '\'') aChar = '\'';
 else if (aChar == ' ') aChar = ' ';
 else
 throw new IllegalArgumentException ("error in Encoding: '\\"+aChar+" not supported");
 outBuffer.append(aChar);
 } else
 outBuffer.append(aChar);
 return outBuffer.toString();
 * writes out any of the characters in specialSaveChars
 * with a preceding slash
 private String saveConvert(String theString, boolean escapeSpace) {
 int len = theString.length();
 StringBuffer outBuffer = new StringBuffer(len*2);
 for(int x=0; x<len; x++) {
 char aChar = theString.charAt(x);
 switch(aChar) {
 case ' ':
 if (x == 0 || escapeSpace)
 outBuffer.append('\\');
 outBuffer.append(' ');
 break;
 case '\\':outBuffer.append('\\'); outBuffer.append('\\');
 break;
 case '\t':outBuffer.append('\\'); outBuffer.append('t');
 break;
 case '\n':outBuffer.append('\\'); outBuffer.append('n');
 break;
 case '\r':outBuffer.append('\\'); outBuffer.append('r');
 break;
 case '\f':outBuffer.append('\\'); outBuffer.append('f');
 break;
 default:
// if ((aChar < 0x0020) || (aChar > 0x007e)) {
// outBuffer.append(aChar);
// } else {
 if (specialSaveChars.indexOf(aChar) != -1)
 outBuffer.append('\\');
 outBuffer.append(aChar);
 return outBuffer.toString();
 * Returns true if the given line is a line that must
 * be appended to the next line
 private boolean continueLine (String line) {
 int slashCount = 0;
 int index = line.length() - 1;
 while((index >= 0) && (line.charAt(index--) == '\\'))
 slashCount++;
 return (slashCount % 2 == 1);
 private static void writeln(java.io.BufferedWriter bw, String s) throws java.io.IOException {
 bw.write(s);
 bw.newLine();
}I hope you can use this class for your needs as I can. For me it supports any characters so far. If you find some bugs on it, let me know
Regards,
Gregor Kappler

Assembly language on Mac OS X

I just purchased two books. The first is called "Write Great Code -- Volume 1: Understanding the Machine". It is not about assembly language in specific, just about understanding how computers work on a low level. The other is called "Assembly Language: Step-by-Step" by Jeff Duntemann. I've only read the introduction. It teaches assembly language for Intel-based computers (that's me!), but it also says that it's for DOS and Linux. However, I believe that the reason it says this is because it teaches using the NASM assembler, which, at the time this second edition of the book was published, was only available for DOS and Linux. However, they now have a Mac OS X version of NASM, and I've download it. So, here are my questions:
1.) Given the information I just gave about this book, I want to make sure that the information and code in it will apply to Mac OS X. It certainly sounds like it will, and I understand that there may be minor differences, but I just want to make sure that I'm in the right ballpark here by using this book.
2.) Since it teaches NASM, I'm assuming that NASM was the right assembler for me to download. I also just wanted to check and see if there's any other tools I should be downloading. The book mentions a NASM-IDE, but says that it's for DOS only. Is there anything else like this (or anything else at all) that I should obtain?
3.) Does NASM need to be installed? I went to the NASM website and downloaded the newest version (2.08rc1) for Mac OS X, and it unzipped in my Downloads folder. I've opened the folder and it's a bunch of files that I can't recognize (no install or app files in other words -- just files like rdf2bin, rdf2com, idrdf, and so forth). Is there anything else I need to do? Should I move this folder somewhere? What else do I need to do to get started here? Where would I write my code? How would I run the code? As of right now I have no idea where to go from here, and as you can tell I know nothing about how all this works. Maybe the book will tell me more when I get to the first code sample in the book, but it doesn't look like it, so I just wanted to ask for any information that anyone has time to give about anything relating to getting starting with assembly language and NASM on Mac OS X.
Thanks in advance for any help. I'd love to hear any input or recommendations on this subject, since it's something I really know nothing about, but you gotta start somewhere!

Okay, so I found a site to guide me through the installation of NASM on Mac OS X, and it said that 2.08rc1 is a "release candidate" (thus the "rc" part -- yeah, I'm not too sharp), and that I should have downloaded the newest version that didn't have "rc" in it, so I went back and downloaded 2.07. Unlike with 2.08rc1, there wasn't a folder on the website for a Mac OS X version, just DOS and Linux and Win32 and whatnot, but the site that was guiding me said to download the file called nasm-2.07.tar.bz2 (or something like that), so that's what I did. It then gave me instructions for configuring and installing NASM via the terminal, and it worked great! I've compiled and installed NASM, so I've gotten that far, but the rest of my questions in the previous post still apply. For example, I still want to make sure the book I bought will be applicable to assembly language on Mac OS X. Also, I'd like to know if there is anything else (like the NASM-IDE I mentioned in the above post) that I should download. And, finally, I still don't know where to go from here to get started with coding assembly language (I mean, for example, I think I read in my book that you write the code in a text editor -- is that right? How's that work?). Any further input on any of this or anything from the previous post above would be greatly appreciated. Thanks!

How to use foreign language soft in CS5/Window 7

I use a language software (Vietnamese) for photo captions. It works in CS5 in Window XP Professional but not in Window 7. What do I have to do to be able to use the language software in CS5/Window 7 ? I did check the all the type options but it still does not work.

Is this language software advertised to be compatible with Windows 7? The incompatibility may not have anything to do with Photoshop.
One of the big differences between Windows 7 (also Vista) and XP is the User Account Control facility. It is possible that if you can't get a newer version of this software that you might be able to make it work by reducing the level of Windows 7 UAC. Click Start and type UAC in the search box to access the setting to do that.
-Noel

Can read4me.app use diferent languages in snow leopard?

When I go to preferences-speech its not possible to chosse my language, spanish.
Sorry for my english.
If someone could help me I would be happy.
Another think, its possible to found a program that can read the mails?
Thany you very much,
Jordi.

Read4me is also localized in Spanish and was tested with AssistiveWare, and also Cepstral voices.
AssistiveWare software is available on a Try-Before-You-Buy basis. You can download a Spanish voice here:
http://www.assistiveware.com/iVox/Spanish.dmg
You can use read4me to read selected text in other applications from the 'Services' menu, once you have set this up in system preferences.

Apps installed from itunes uses german language

Hi!
I downloaded 2 apps (facebook, snapchat) from itunes and installed it on my iphone 5c using my laptop, the app language is in German now and i cannot change it back not even when reinstalling. Iam from Hungary by the way. Is it possible to chang ethe language to fit my location again?
Thanks

Hello there, Xakeom.
The following Knowledge Base article offers up some great steps for troubleshooting issues with apps downloaded from the App Store:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Assembly language in X-Code

I am currently taking assembly language for my undergrad. i have Xcode installed in my computer but i have no idea how to use the xcode for the assembly language. can anyone help me with that.

Which assembly language are you referring to?
The documentation from apple can be found here: http://developer.apple.com/library/mac/documentation/DeveloperTools/Reference/As sembler/Assembler.pdf.

Sapscript -how to use multiple language ?

hi all,
can we use multiple languages in a script. i mean thet can we print a data from a particular text element
in different languages.
is it possible ?
and also how to handle differnt currencies in sapscript?

Hi,
when you use the syntax INCLUDE in sapscript, you could set the language with the command LANG. Have a look to the SapScript documentation.
Example from the help.sap.com :
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
For the currency what is the problem ?
the decimals positions could be manage with the WRITE ... CURRENCY.
the conversion must be made by SAP itsel, but you could use the function CONVERT_TO_LOCAL_CURRENCY.
Rgd
Frédéric
Message was edited by: Frédéric Girod

Is it possible to use wildcards to match cell contents in an if statement?

I need to return a ID along with some other information on a page by page basis, so that the information comes out linked by position. I use a couple of loops and if statements to navigate through the document. I am able to use exact matches of cell contents which is fine when the contents doesn't vary. But the IDs, though they have a similar pattern, are all different. In a menu driven search, I am able to find what I need with '150^9^9^9^9^9-^9^9^9' But when I try putting this (or any number of [0-9], *, ? combinations) it fails. Is it possible to use wildcards? The symbol used for the match (==) makes me suspect that it is not possible and that only literal, exact matches will work. But I wanted to check with the experts before giving up.
Thanks
pcbaz

Thanks for the input. You're right, a GREP search is much more efficient. But what I'm trying to do and the circumstances here don't allow me, I think, to go that route. I am trying to generate a list of values coming from several textframes on a single page and have them come out so that I can tell which values belong together.
I'm using an inherited document with masters that were created 'manually'; the index numbering for textframes and tables is random. I navigate through the pages, looping through textframe indices asking ' does this textframe exist?' If so, I ask if it is a table -- if no, it is a simple textframe and I ask about the ID, if yes, I ask if the contents of cell (0,0) (invariant position and contents) are equal to the table I want.. I am sending the ID and other pieces of information from the table to one row of a new table on a new page. So the ID and other information from a single page are linked by being in the same row.
I know this a little 'off-normal' -- I'm using the search to navigate through the document and find things by location the way you do with a spreadsheet. I have devised a work-around that helps me get around the fact that the ID is not invariant. I create a list of the (exact) IDs from another document, equating them to a variable ('a'). I then loop through the list of IDs and ask if the contents of the textframe is equal to 'a'..This works o.k, unless there happens to be an extra space, a different kind of hyphen, etc. It would be so much easier if I could use the wildcards that work in a menu-driven text or GREP search in script just to ask about the contents of the textframe.
Thanks again
pcbaz (Peter BIerly)
P.S. we have since rewritten the masters so this problem will not exist in the future -- we now know exactly which textframe and/or table indices to refer to to get any particular bits of information and don't need to ask questions about the contents.

Is it possible to use a cable with two headphone jacks on either end and an electric guitar adapter to record in Garageband?

Hey everyone,
I got my Macbook Air (Mid 2013 model) last month and I want to record my acoustic-electric guitar on Garageband (which came with the Air).
I don't want to buy a guitar that has a USB. I have a cable with a 3.5 mm headphone jack on both ends like the one pictured here on this website http://www.bestdealaz.com/item.php?id=628 (i didn't buy it from this site though).
I connected a 6.3 mm guitar adapter (http://www.ebay.com/bhp/headphone-guitar-adapter) to this cable. Then I connected one end of the cable to my guitar and the other end to the Headphone/Microphone jack on the left side of the MBA.
I saw how other people were saying to go to System Preferences / Sound and then change audio output to audio input.
I can't do that. I tried.
Please help!
Thank you.

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

Is it possible to use assembly language..?

Similar Messages

Maybe you are looking for