Is it possible to use the upgrade tool to generate SSC's anymore?

I have a hand few of really old 1130's, manufactured prior to when MICs were installed. In anycase I wanted to convert a few of them to lightweight for use in a remote location with a 4400 we have laying around. Long story short, during the upgrade process I see an error on access point. I looks like one of the airespace certs that is copied over has expired back in April of this year. After the upgrade the access point fail to join the controller. I see an error on the access point and it seems there is a problem with it accepting the certificate on the controller. I see several posts were it seems that some people are having the same problem, I have not seen a solution.
I think that if I got it to connect the first time it wold be good to go. I'm wondering if configuring the conversion tool with a date prior to expiration would get the certificate on the access point and maybe at that point it would work.

Sounds like 2 issues. First need to make sure you have ssc check boxed under allowed. Then when the ap tries to join do the following debug to get the hash for the ap cert ..
(Cisco Controller) > debug pm pki enable
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles: getting (old) aes ID cert handle...
Mon May 22 06:34:10 2006: sshpmGetCID: called to evaluate
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 0,
CA cert >bsnOldDefaultCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 1,
CA cert bsnDefaultRootCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 2,
CA cert >bsnDefaultCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 3,
CA cert >bsnDefaultBuildCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 4,
CA cert >cscoDefaultNewRootCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 5,
CA cert cscoDefaultMfgCaCert<
Mon May 22 06:34:10 2006: sshpmGetCID: comparing to row 0,
ID cert >bsnOldDefaultIdCert<
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles: Calculate SHA1 hash on
Public Key Data
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 30820122 300d06092a864886 f70d0101
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 01050003 82010f003082010a 02820101
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 00c805cd 7d406ea0cad8df69 b366fd4c
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 82fc0df0 39f2bff7ad425fa7 face8f15
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data f356a6b3 9b87625143b95a34 49292e11
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 038181eb 058c782e56f0ad91 2d61a389
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data f81fa6ce cd1f400bb5cf7cef 06ba4375
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data dde0648e c4d63259774ce74e 9e2fde19
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 0f463f9e c77b79ea65d8639b d63aa0e3
Mon May 22 06:34:10 2006: sshpmGetIssuerHandles:
Key Data 7dd485db 251e2e079cd31041 b0734a55
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 463fbacc 1a61502dc54e75f2 6d28fc6b
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 82315490 881e3e3102d37140 7c9c865a
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 9ef3311b d514795f7a9bac00 d13ff85f
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 97e1a693 f9f6c5cb88053e8b 7fae6d67
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data ca364f6f 76cf78bcbc1acc13 0d334aa6
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 031fb2a3 b5e572df2c831e7e f765b7e5
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data fe64641f de2a6fe323311756 8302b8b8
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
Key Data 1bfae1a8 eb076940280cbed1 49b2d50f
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles: Key Data f7020301 0001
Mon May 22 06:34:14 2006: sshpmGetIssuerHandles:
SSC Key Hash is 9e4ddd8dfcdd8458ba7b273fc37284b31a384eb9
!--- This is the actual SSC key-hash value.
Mon May 22 06:34:14 2006: LWAPP Join-Request MTU path from
AP 00:0e:84:32:04:f0 is 1500, remote debug mode is 0
Mon May 22 06:34:14 2006: spamRadiusProcessResponse:
AP Authorization failure for 00:0e:84:32:04:f0
Then add the ap to the Mac filter ..
Sent from Cisco Technical Support iPad App

Similar Messages

  • Is it possible when using the markup tools to make them locked in position?

    I am using Acrobat 8 Pro and my boss wants to be able to draw on a PDF. which is fine when he uses the markup tools provided, the only problem is that when he has to draw something that starts and ends on a existing markup it selects the markup and moves it. Is there anyway to make it so that a selection tool has to be engaged before something can be selected, instead of automatically being able to select things once the cursor it brought over it. Thanks

    If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette.  You may be able to write a Photoshop that would do as save as Jpeg,  And you should be able trigger its execution by setting up a Script Save event using the Script event manager.  When You do a manual save  the script should be triggered.  I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event.  I have only use open events.

  • Cannot upgrade an AP1242 to LWAP using the upgrade tool 3.4

    I have installed the tool on an XP laptop.
    If I configure the tool to use an external tftp server then I get upgrade failed.
    "Unable to Load  the LWAPP Recovery Image on to the AP"
    If I use the built in tftp server I get a msgbox with "C:\Program Files\Cisco Systems\Upgrade Tool\images\c1240-rcvk9w8-tar.123-11JX1.tar - LWAPP Recovery Image is not a valid one".
    This is the log output
    2011/03/15 15:52:57 DEBUG   10.10.10.5   Validating IP address
    2011/03/15 15:52:57 DEBUG   10.10.10.5   Opening a telnet connection to the AP
    2011/03/15 15:53:00 INFO   10.10.10.5   User  has  Full privilege
    2011/03/15 15:53:00 INFO   10.10.10.5   Getting  AP Name
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Verify if APs image is 12.3(07)JA or greater
    2011/03/15 15:53:00 INFO   10.10.10.5   AP  has 12.3(7)JA Image or greater
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Identifying the AP Type
    2011/03/15 15:53:00 INFO   10.10.10.5   Term Length configured.
    2011/03/15 15:53:00 INFO   10.10.10.5   Upgrade Tool supported AP
    2011/03/15 15:53:00 DEBUG   10.10.10.5   Check whether AP has supported Radio
    2011/03/15 15:53:01 INFO   10.10.10.5   AP has two radios
    2011/03/15 15:53:01 DEBUG   10.10.10.5   AP has Supported Radio
    2011/03/15 15:53:01 INFO   10.10.10.5   AP has Supported Radio
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Verifying Station Role
    2011/03/15 15:53:01 INFO   10.10.10.5   Station role is  Root AP
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Check whether AP has  MIC Certificate
    2011/03/15 15:53:01 INFO   10.10.10.5   MIC is already configured in the AP
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Getting Ethernet MAC address
    2011/03/15 15:53:01 INFO   10.10.10.5     Hardware is PowerPCElvis Ethernet, address is 001f.ca28.973a (bia 001f.ca28.973a) 
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Getting the Radio Status
    2011/03/15 15:53:01 DEBUG   10.10.10.5   Entering Configuration mode
    2011/03/15 15:53:02 INFO   10.10.10.5   Inside Shutdown function
    2011/03/15 15:53:04 INFO   10.10.10.5   Shutdown the Dot11Radio1
    2011/03/15 15:53:06 INFO   10.10.10.5   Shutdown the Dot11Radio0
    2011/03/15 15:53:06 DEBUG   10.10.10.5   Getting Current System Time
    2011/03/15 15:53:07 INFO   10.10.10.5   Updating the AP with Current System Time
    2011/03/15 15:53:07 DEBUG   10.10.10.5   Entering Configuration mode
    2011/03/15 15:53:07 DEBUG   10.10.10.5   Executing show run
    2011/03/15 15:53:08 INFO   10.10.10.5   Saving the configuration into memory
    2011/03/15 15:53:08 INFO   10.10.10.5   Getting  AP Name
    2011/03/15 15:53:08 DEBUG   10.10.10.5   Loading the LWAPP Recovery Image on to the AP
    2011/03/15 15:53:09 DEBUG   10.10.10.5   Checking the Upload Status
    2011/03/15 15:53:11 ERROR   10.10.10.5   Unable to Load  the LWAPP Recovery Image on to the AP
    2011/03/15 15:53:18 INFO   10.10.10.5   Dot11Radio0 is up now
    2011/03/15 15:53:18 DEBUG   10.18.227.10   Opening a telnet connection to the Controller
    2011/03/15 15:53:19 DEBUG   10.18.227.10   Telnet connection to the Controller opened
    I see from other posts that JX image is required but it is not working for me. Can anyone help?

    If I try to extract the tar file direct to flash I get this:
    Loading c1240-rcvk9w8-tar.123-11JX1.tar from 10.1.1.1 (via BVI1): !
    %Tar checksum error in fd 0
    ERROR: Failed to extract from archive file tftp://10.1.1.1/c1240-rcvk9w8-tar.123-11JX1.tar
    Maybe the files are damaged but I have dowloaded them all from cisco.com yesterday.

  • Cannot upgrade an AP to LWAP using the upgrade tool on Windows 7

    Hello,
        I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP.  However, I go to a coworker's XP machine and run the tool without issues.  On Windows 7 I keep receiving the error message of ACL or Firewall is blocking.  I have added rules and then even tried disabling the firewalls completely on both computers and still no success.  Help!
    Thanks,
    Kristen Woodard
    Network Engineer II

    As an aside here, if the AP are newer, manufactured after 6/2005(Has a MIC and not a SSC), you can do a normal archive download command to run the upgrade to the recovery image.  Can even be scripted to run multiple times via shell/cron
    HTH,
    Steve
    Please remember to rate helpful posts or to mark the quesiton as answered so that it can be found later.

  • I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    iCloud requires OS X 10.7.2.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • How come I cannot use the Editing tools when i am using Adobe Acrobat Reader DC It wants me to Buy Now.  But when I use Adobe Acrobat Pro DC i have no problem using the Editing tool yet   I had Adoboe Acrobat XI Pro then it was upgraded to this DC stuff

    I am already paying a subscription for Adobe Acrobat XI Pro  Now it want me to buy when using the edit tool or even the tool to insert pages Never had that problem before??????????????

    Acrobat Reader can't edit PDF files. Use Adobe Acrobat Pro DC.

  • Adobe Photoshop CS4/5 Crashes when using the Move Tool

    Hello. I'm here because I'm having an issue with Photoshop.
    I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
    A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
    Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
    This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
    My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
    I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
    The error code, from Event Viewer:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x65637275
    Faulting process id: 0xe28
    Faulting application start time: 0x01cb2bb3471d87bf
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: unknown
    Report Id: b412e368-97ab-11df-8f49-001d60b646ef
    Details:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-07-25T05:15:57.000000000Z
    EventRecordID
    78845
    Channel
    Application
    Computer
    Gatherum
    Security
    EventData
    Photoshop.exe
    11.0.2.0
    4bf2d4f6
    unknown
    0.0.0.0
    00000000
    c0000005
    65637275
    e28
    01cb2bb3471d87bf
    C:\Program  Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    unknown
    b412e368-97ab-11df-8f49-001d60b646ef
    Details in XML View:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
    <EventRecordID>78845</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gatherum</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>65637275</Data>
    <Data>e28</Data>
    <Data>01cb2bb3471d87bf</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>unknown</Data>
    <Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
    </EventData>
    </Event>
    System Specifications:
    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
    System Manufacturer: HP-Pavilion
    System Model: GN697AA-ABA a6214x
    Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
    Memory: 2048MB RAM
    DirectX Version: DirectX 11
    Display Device:
    Name: NVIDIA GeForce 8600 GTS
    Manufacturer: NVIDIA
    DAC Type: Integrated RAMDAC
    Approx. Total Memory: 1010 MB
    Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
    Photoshop Version: CS4 Extended 11.0.2

    Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process.  That said, with a little research and care you can do it.  Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
    First, you'll need to know what your operating system capacity is.  For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in.  What version of Windows are you running?
    Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches.  There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
    http://www.kingston.com/
    It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade.  Every computer is different.
    If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
    -Noel

  • How can I use the versionning tool to make a coherent solution to export

    how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
    I want to know proper steps to Import/export objects.
    while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
    while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
    required ur suggestion
    Palash Chatterjee

    kelly-bot wrote:
    Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
    Our posts overlapped there.  Are you saying you could reliably drag one pixel with CS3? 
    What other issues are you having?  Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

  • Can you merge two user accounts on macbook? my wife has created a user on her new macbook , then inadvertently created a second one when using the migration tool. 1st ac has her office 365 install, yet 2nd has her itunes database, docs and contacts.

    Can you merge two user accounts on a macbook? my wife has created a new user on her new macbook air then, inadvertently, created a second one when using the migration tool. 1st a/c has her office 365 install, while 2nd has her itunes database, docs and contacts. What is the best way forward to get everything into the one account? Not sure if the office 365 will allow another installation into the second account, otherwise would just do that and delete the first, if that is possible?

    There is no merge but you can move data from one account to another via the Shared folder. Data is copied from Shared. Watch your free space when copying. These are large files.  Do one at a time if you are on a small drive. After making copy, delete from other users before you start next copy.
    Office365 installs in the main Applications folder and is available for all users on the computer. Activation is tied to the drive not the User.

  • Is it possible to use the Apple wireless keyboard with the iPhone 6? Will the Magic Mouse work with iMovie on iPhone6 Plus?

    iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.

    Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.

  • How do I use the move tool in CS5 to put two images on to an A4 sheet?

    Have recently upgraded from CS3 to CS5.
    I often print out two images on A4 paper.  Under CS3 I would simply adjust and crop 2 images to say 7 ins x 5 ins, after that bring up a new A4 sized sheet (file, new), then using the move tool I'd move the two separate images on to the A4 sheet and print.  Fine!
    Now under CS5, once I've adjusted my first image then try to bring up a second image to adjust that one I seem to lose the first one from the screen.  But on going back via Bridge and clicking on the image it re-appears - problem is, I lose the second image.
    When I bring up a new A4 sheet neither of the images stay on the screen and there is nothing to move.
    Have been into Preferences to see if there is anything there to help but can't see anything.
    Does anyone know what is happening here and what I'm doing wrong i.e. how do I get 2 separate images on to an A4 sheet?
    Thanks,
    Bob Eveleigh.

    There have been changes since cs3, mainly that cs5 uses tabs.
    Tabs can be confusing if your coming from cs3.
    If your in the tabbed mode, try going to Window>Arrange>Tile.
    All your open documents should be visible on the screen.
    If this is the cause of your frustrations, you can read more here:
    http://help.adobe.com/en_US/photoshop/cs/using/WS8599BC5C-3E44-406c-9288-C3B3BBEB5E88.html #WS6389D09B-91D5-4474-9AED-C52AE33356EB
    MTSTUNER

  • Possible to use the UDI Wizard for standalone USMT Online Restore?

    I'm looking for a solution for a specific scenario.  We are looking to use UDI for a replace scenario where we will use a UDI task sequence to backup USMT data to a USB drive on the old PC and turn around and restore that data on a new PC already
    provisioned and configured computer.  
    My goal is use UDI task sequences but it appears that out of the box UDI task sequences only allow for restoration of user data during a standard replace Operating System Deployment task sequence and not a stand alone USMT restore data only task sequence.
    Any ideas if this is possible to create a UDI driven USMT restore data only task sequence?
    MDT 2012 Update 1
    SCCM 2012 SP1

    Hi,
    Please try the steps below to see if it helps:
    1. Uninstall-WindowsFeature -Name desktop-experience -Remove
    2. Mount-WindowsImage -path c:\mount\ -Index 4 -ImagePath D:\sources\install.wim –ReadOnly
    3. Add-WindowsFeature -Name desktop-experience -Source C:\mount\Windows\WinSxS
    4. Install-WindowsFeature –name desktop-experience
    It seems that the components needed to add the Desktop Experience feature back to the build are located in the SXS (side by side) folder of the install media and can be re-added using the DISM tool.
    Please can you try with the following command and let me know if this resolves the issue in your environment 
    - dism /online /enable-feature /featurename:desktopexperience /source:D:\sources\sxs /limitaccess
    You could also refer to the thread below to troubleshoot the issue:
    Can't Install Desktop Experience on Server 2012 - Sources problem
    http://social.technet.microsoft.com/Forums/cs-CZ/737c3070-f651-494a-bc88-d60731616055/cant-install-desktop-experience-on-server-2012-sources-problem?forum=winserver8gen
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Photoshop CS4 Crash Using the Pen Tool

    We have experienced an issue where creating a line/path using the Pen tool in Photoshop CS4 caused a system-wide freeze, regardless of operating system, other software installed, etc....
    Not even a kernal panic, but just a complete freeze.
    We found that it only occurred on our white, 24-inch iMacs (2.16 Ghz Intel Core 2 Duo). I tried it on 5 different white iMacs, with various builds of Tiger or Leopard, and they all froze up completely.
    We had a plain 10.5.8 image on one of the white iMacs, with nothing extra except Photoshop CS4, and it froze up completely using the Pen Tool on a new document as well.
    Oddly enough, the workaround was having Photoshop CS4 run using Rosetta, and then the Pen Tool works fine. It is odd considering the iMacs have Intel processors, and not PowerPC that would need Rosetta.
    I have not found anyone else with hardware specific issues like this. So, I thought i should share our (hopefully) temporary workaround.

    A complete system freeze means a kernel or driver level bug, or a hardware problem.
    Rosetta won't process as fast - meaning that the processor is less taxed, and it may call the drivers differently.
    Upgrading to MacOS 10.6 might avoid driver problems (that were in 10.5), but hardware issues would remain.
    But first you might try disabling OpenGL drawing in preferences (avoiding the most problematic drivers, and reducing the load in the graphics hardware).

  • Photoshop CS6 Cloud crashes when I use the eyedropper tool

    Since upgrading to CS6 Creative Cloud subscription a few weeks ago I have noticed Photoshop has crahsed a number of times when I am using the eyedropper tool - very frustrating, please help.

    Update your graphics driver, check your monitor color profile and otehr such settings.
    Mylenium

Maybe you are looking for