Is it safe to purge / delete older records from AUD$ table in SYS schema

Hi,
Can we purge / delete older records from AUD$ table in SYS schema.
Please advice.
Thanks
Naveen

Pl see MOS Doc 73408.1 (How to Truncate, Delete, or Purge Rows from the Audit Trail Table SYS.AUD$) fro details on how to do so.
HTH
Srini

Similar Messages

How to delete a record from BSEG table

Dear Experts,
How to delete a record from BSEG table.
If there possible to delete some records from transparent table ?
Please help.
Regards,
Tan

Hi,
Deleting a record from a standard table can be done only if table maintenance exists - Cehck tcode - SM30. But it is not advisable to delete records, coz the records may be dependent on many other tables. If u delete in a single place, there may be chance that inconsistency in the data happens and hence will affect ur financial statements.
Pls. assign points, if useful
Regards,
Sridevi

Delete a record from a table in a Database with Database Connectivity

I can't find the function from the Database Connectivity library that allows me to delete a record from a table of the database. I tried to use DB Tools Free Object.vi function but this one deletes only the table created with a query.
Thankyou

I have used the sql query as described above and it works fine with access DB and the DB toolkit, the free object vi only deallocated a recordset's references this will noty alter the database since the record is a copy of the databases information. The SQL delete function is very versatile and you should be able to delete records with no problem.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

To delete duplicate records from internal table

hi friends,
i have to delete records from internal table based on following criterion.
total fields are 7.
out of which if 4 fields are same and 5th field is different,then both records must be deleted.
in case all five fields are same,the program should do nothing.
for example.
if there are 3 records as follows
a1 b1 c1 d1 e1 f g
a1 b1 c1 d1 e2 w r
a1 b1 c1 d1 e1 j l
then first two records should be deleted as four fields are same but fifth(e) field differs.
but third record should remain as it is evenif first five fields are same for first and third record.
values of last two fields need not to be consider for deleting the records.

LOOP AT ITAB.
V_FILED5 = ITAB-F5. "to compare later
V_TABIX = SY-TABIX. "used to delete if condition not matches
READ TABLE ITAB WITH KEY F1 = ITAB-F1
                           F2 = ITAB-F2
                           F3 = ITAB-F3
                           F4 = ITAB-F4.
IF SY-SUBRC = 0.
    IF ITAB-F5 <> V_FIELD5.
*--both the records to be deleted,as Field5 is different.
      DELETE ITAB INDEX SY-TABIX. "deletes that record
      DELETE ITAB INDEX V_TABIX. "deletes the current record
    ENDIF.
ENDIF.
ENDLOOP.
Message was edited by: Srikanth Kidambi
added comments
Message was edited by: Srikanth Kidambi

Unable to delete double records from internal table

Hi all,
The internal table is like this
begin of ta_itab1 occurs 0,
      mark type c,
      cnt_hedg type c,
      kunnr like vbak-kunnr,
      vbeln like vbak-vbeln,
      posnr like vbap-posnr,
      matnr like vbap-matnr,
      kwmeng like vbap-kwmeng,
      h_kwmeng like vbap-kwmeng,
      spart like vbap-spart,
      werks like vbap-werks,
      component like bom_item_api01-component,
      comp_qty like bom_item_api01-comp_qty,
      comp_qty1 like bom_item_api01-comp_qty,
      base_quan like stko_api02-base_quan,
      comp_unit like bom_item_api01-comp_unit,
      base_unit like bom_item_api01-comp_unit,
      bukrs_vf like vbak-bukrs_vf,
      end of ta_itab1.
and used the sytax:
sort ta_itab6 by kunnr vbeln.
DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.
but Im unable to delete duplicate record .
Thank You.
anu

Hi ,
You need to use the fields in sort statement on whichyiu wnat to perform Delete Adjacent duplicates..
sort ta_itab6 by kunnr vbeln COMP_QTY COMP_QTY1.
DELETE ADJACENT DUPLICATES FROM ta_itab6 comparing COMP_QTY COMP_QTY1.

Delete matching records from internal table

I have two internal tables.
say :
1)zsd80
2)i_vbrk
i want to delete records from i_vbrk which are not in zsd80.
this is my code. but it shows dump error after executing. please help.
LOOP AT i_zsd80 INTO zsd80.
            LOOP AT i_konv INTO w_konv FROM w_index.
              IF w_konv-kschl NE zsd80-kschl.
                DELETE i_konv FROM w_konv.
              ENDIF.
            ENDLOOP.
          ENDLOOP.

Hi,
Do like this...
1. Loop at the where u want to delete..
2. store the sy-index...
3. read the other table....
4. if nothing found in read then delete that index...
LOOP AT i_vbrk.
TABIX = SY-TABIX.
READ TABLE zsd80 WITH KEY .......
IF SY-SUBRC NE 0.
    DELETE IT_VBRK INDEX TABIX.
ENDIF.
ENDLOOP.
regards
Sukriti.....
Edited by: Sukriti Saha on Nov 3, 2008 1:19 PM

Deletion of record from z table

Hi,
How can I delete or update a record directly from Z table. Are there any implications in deleting the record directly.
Thanks,
Waqas Rashid

Hi Rasid,
Tell ABAPer to generate a Maintainance View
Step1 : Goto->SE11 give Ztable and display
Step2 : Utilities->Table Maintainance Generator
Step3: Give Authorization Group, Function Group, Maintenance type (one step) and Overview Screen(give a no of 4 digits) and save
Step4 : After successfully generates this and you have to go sm30 give Ztable and maintain.
Step5 : There you can get new entries, change, save, delete etc...
Thanks
Chinni

Is it possible to delete the records from LIS Table S601

We have created some errorneous/unwanted records in planning in table S601. Is there a way to delete these enties by Plant or material.
Need your help urgently.. Please help.
Thanks in Advance
Rajesh

Hi
Once we created variant we can't delete it,
Regards,
srihari

How to delete the records from custom table???

My requirement is,
I have a custom table, assume as ZABC, I have updated this by my custom program, This data having table can be extracted by BI etract program(Assume ZZZ). Here I am not writing any code for extracting data from table to BI extract program, That they will do by BI extract program. But I want to write the code for
<b>Cleanup of Z tabledelete records 30 days after the BI data extractor has run.</b>
How this is possible suggest me any method having for these???
Thanks Sanju

Hell Sanjana,
Ask your basis people to do the clean up after 30 days. If you want the clean up only to be done 30 days after BI extract has been done, then u need some sort of indicator to say that BI Extract has been done , like flag and date in a custom table which will be set as soon as extract is done. Then based on that info u need to delete a the records.
Regards

How to delete the records from database table without using work area

Hi all,
The purpose of the down program is to delete the entire contents from all the tables. The deletion of the table should be in sorted manner. Is there any other way to write the code more efficiently,
TABLES: ZFFMCTL_AP, ZFFMHDR_AP, ZFFM_CHANGE_LOG, ZFFMDTL_AR, ZFFMHDR_AR, ZFFMDTL_JV, ZFFMHDR_JV, ZFFMDTL_SKF,ZFFMHDR_SKF,ZFINVOICE_DETAIL, ZFFMMASTER, ZFFMLOGREAD_CLUS, ZFFMCTL.
DELETE ZFFMCTL_AP.
IF SY-SUBRC = 0.
DELETE ZFFMMHDR_AP.
IF SY-SUBRC = 0.
DELETE ZFFM_CHANGE_LOG.
IF SY-SUBRC = 0.
DELETE ZFFMDTL_AR.
IF SY-SUBRC = 0.
DELETE ZFFMHDR_AR.
IF SY-SUBRC = 0.
DELETE ZFFMDTL_JV.
IF SY-SUBRC = 0.
DELETE ZFFMHDR_JV.
IF SY-SUBRC = 0.
DELETE ZFFMDTL_SKF.
IF SY-SUBRC = 0.
DELETE ZFFMHDR_SKF.
IF SY-SUBRC = 0.
DELETE ZFINVOICE_DETAIL.
IF SY-SUBRC = 0.
DELETE ZFFMMASTER.
IF SY-SUBRC = 0.
DELETE ZFFMLOGREAD_CLUS.
IF SY-SUBRC = 0.
DELETE ZFFMCTL.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Waiting for response,
Thanks in advance
John

Write this way....
TABLES: ZFFMCTL_AP, ZFFMHDR_AP, ZFFM_CHANGE_LOG, ZFFMDTL_AR, ZFFMHDR_AR, ZFFMDTL_JV, ZFFMHDR_JV, ZFFMDTL_SKF,ZFFMHDR_SKF,ZFINVOICE_DETAIL, ZFFMMASTER, ZFFMLOGREAD_CLUS, ZFFMCTL.
DELETE ZFFMCTL_AP.
CHECK SY_SUBRC = 0.
DELETE ZFFMMHDR_AP.
CHECK SY_SUBRC = 0.
DELETE ZFFM_CHANGE_LOG.
CHECK SY_SUBRC = 0.
DELETE ZFFMDTL_AR.
CHECK SY_SUBRC = 0.
DELETE ZFFMHDR_AR.
CHECK SY_SUBRC = 0.
DELETE ZFFMDTL_JV.
CHECK SY_SUBRC = 0.
DELETE ZFFMHDR_JV.
CHECK SY_SUBRC = 0.
DELETE ZFFMDTL_SKF.
CHECK SY_SUBRC = 0.
DELETE ZFFMHDR_SKF.
CHECK SY_SUBRC = 0.
DELETE ZFINVOICE_DETAIL.
CHECK SY_SUBRC = 0.
DELETE ZFFMMASTER.
CHECK SY_SUBRC = 0.
DELETE ZFFMLOGREAD_CLUS.
CHECK SY_SUBRC = 0.
DELETE ZFFMCTL.

Prevent auto data deletion of records from gl_interface table after success

Hello All,
I currently developing the journal conversion.
I have successfully imported some sample journal data.
But the problem here is i am not able find the successfully uploaded journal data in the gl_interface table.It is getting deleted after successful import.
How to prevent this deleted, i want that data to be available in the gl_interface table.
Any setup needs to be done for this?
Oracle ebs version : 12.1.1
Thanks & Regards
aboothahir

any suggessions on the above query?
Thanks & regards
Aboo

How to delete errorneous records from Tperslangu Table.

Hi,
While uploading master data attribute 0event_attr , giving error in languge key. If i check these records in table tperslangu in BW , three entries are there
PERSLANGU               LANGU                TXTSH
       HI                            E                          Hindi
      묩                     D                          Hindi
      묩                     E                           Hindi
How to rectify this problem .
Regards,
Anand Mehrotra.

Dear Mr. Saveen,
Thanks for reply.
I checked , it has english & german only. How to install hindi.
Regards,
Anand Mehrotra.

Can we delete the records from a table, when sqlldr is loading

Hello All
We have a table on which we have indexes on some columns.
This table is populated using the sqlldr. Now I want to delete the seven days old data, in a procedure. I want to know , can I run that procedure, when the sqlldr is loading into that table. Note that, the table has indexes
Regards

Hello
Now we are thinking to create the partition on datetimeinserted, and want to delete the 7 day old partition, How about this? is this going to work? while still direct load of sqlldr is on.
Regards

Maximum Open cursor Exceeded error when deleting records from a table

I have a strange problem.
I have a table EMP_MASTER . Whenever I am trying to delete a record from this table, I am getting Maximum no. of open cursor exceeded error. But this error doesnot come when i delete from any other tables. And no. of open cursor is much lesser than OPEN_CURSOR parameter.
All other tables (around 700) has foreign key constraint to this EMP_MASTER table for created_user paramater.
Is it some thing like, when I am trying to delete a record from EMP_master, implicit cursor opens up and checks all referenced tables. and that limit gets exceeded ?
Please help.
Thanks,
Raj

Raji03 wrote:
There is no trigger defined for this table.
Is there a limit on which no.of references made to a column ? Because one column in this field, Emp no is being referenced in almost every other table. around 700 tables. Will it have any adverse effect ?That should have nothing to do with your problem directly. Again, those tables could have triggers defined on them and you are leaking cursors in one of those triggers (wild guess).
An example of a table with many many others foreign key'd to it.
create table parent_of_everything
   column1 number primary key
insert into parent_of_everything select level from dual connect by level <= 1000;
commit;
--create 1000 tables all with foreign keys to the parent_of_everything
begin
   for i in 1 .. 1000
   loop
      execute immediate 'create table child_' || i || ' (column1 number, column2 number, constraint child_' || i || '_fk foreign key (column1) references parent_of_everything (column1) on delete cascade)';
      execute immediate 'insert into child_' || i || ' select level, mod(level, ' || i || ') from dual connect by level <= 1000';
      commit;
   end loop;
end;
TUBBY_TUBBZ?delete parent_of_everything;
1000 rows deleted.
Elapsed: 00:02:53.03No problems were had (none were expected).
Cleanup script.
--remove the 1000 child tables
begin
   for i in 1 .. 1000
   loop
      begin
         execute immediate 'drop table child_' || i || ' purge';
      exception when others
         then
            null;
      end;
   end loop;
end;
/

How to delete records from MTL_SYSTEM_ITEMS table

Hello Experts,
BANNER
=======
Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
PL/SQL Release 8.1.7.4.0 - Production
CORE     8.1.7.0.0     Production
TNS for IBM/AIX RISC System/6000: Version 8.1.7.4.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
I am working on Oracle Apps - 11.5.8 version.
I have some doubts in deleting the records from MTL_SYSTEM_ITEMS table.
There are few records which have junk characters and currently resides in table.
I need to delete those records.
But as per the approach; we should not delete any data directly from MTL table as it would cause huge impact.
I have followed the below approach; but didnt worked out well.
Script
=======
1)
I have modified the below parameter in the MTL_SYSTEM_ITEMS_INTERFACE table --> SET_PROCESS_ID =0,TRANSACTION_TYPE ='DELETE',PROCESS_FLAG=1 .
Apart from that; everything remains the same as in MTL_SYSTEM_ITEM table.
2) Called the "Import Items" concurrent program.
It got successfully completed. But record still exists in MTL_SYSTEM_ITEMS_INTERFACE table
Your help is highly appreciated.
Insert into MTL_SYSTEM_ITEMS_INTERFACE
   (SET_PROCESS_ID ,TRANSACTION_TYPE,PROCESS_FLAG ,INVENTORY_ITEM_ID, ORGANIZATION_ID, LAST_UPDATE_DATE, LAST_UPDATED_BY, CREATION_DATE, CREATED_BY, LAST_UPDATE_LOGIN,
SUMMARY_FLAG, ENABLED_FLAG, DESCRIPTION, BUYER_ID, SEGMENT1, ATTRIBUTE3, ATTRIBUTE4, ATTRIBUTE9, ATTRIBUTE15, PURCHASING_ITEM_FLAG, SHIPPABLE_ITEM_FLAG,
CUSTOMER_ORDER_FLAG, INTERNAL_ORDER_FLAG, SERVICE_ITEM_FLAG, INVENTORY_ITEM_FLAG, ENG_ITEM_FLAG, INVENTORY_ASSET_FLAG, PURCHASING_ENABLED_FLAG,
CUSTOMER_ORDER_ENABLED_FLAG, INTERNAL_ORDER_ENABLED_FLAG, SO_TRANSACTIONS_FLAG, MTL_TRANSACTIONS_ENABLED_FLAG, STOCK_ENABLED_FLAG, BOM_ENABLED_FLAG, BUILD_IN_WIP_FLAG,
REVISION_QTY_CONTROL_CODE, CATALOG_STATUS_FLAG, RETURNABLE_FLAG, TAXABLE_FLAG, QTY_RCV_EXCEPTION_CODE, ALLOW_ITEM_DESC_UPDATE_FLAG, RECEIPT_REQUIRED_FLAG,
RFQ_REQUIRED_FLAG, QTY_RCV_TOLERANCE, LIST_PRICE_PER_UNIT, PRICE_TOLERANCE_PERCENT, ENFORCE_SHIP_TO_LOCATION_CODE, ALLOW_SUBSTITUTE_RECEIPTS_FLAG,
ALLOW_UNORDERED_RECEIPTS_FLAG, DAYS_EARLY_RECEIPT_ALLOWED, DAYS_LATE_RECEIPT_ALLOWED, RECEIPT_DAYS_EXCEPTION_CODE, RECEIVING_ROUTING_ID, LOT_CONTROL_CODE,
SHELF_LIFE_CODE, SHELF_LIFE_DAYS, SERIAL_NUMBER_CONTROL_CODE, RESTRICT_SUBINVENTORIES_CODE, RESTRICT_LOCATORS_CODE, LOCATION_CONTROL_CODE, ACCEPTABLE_EARLY_DAYS,
PLANNING_TIME_FENCE_CODE, LEAD_TIME_LOT_SIZE, ACCEPTABLE_RATE_INCREASE, ACCEPTABLE_RATE_DECREASE, PLANNING_TIME_FENCE_DAYS, END_ASSEMBLY_PEGGING_FLAG,
REPETITIVE_PLANNING_FLAG, BOM_ITEM_TYPE, PICK_COMPONENTS_FLAG, REPLENISH_TO_ORDER_FLAG, ATP_COMPONENTS_FLAG, ATP_FLAG, WIP_SUPPLY_TYPE, PRIMARY_UOM_CODE,
PRIMARY_UNIT_OF_MEASURE, ALLOWED_UNITS_LOOKUP_CODE, COST_OF_SALES_ACCOUNT, SALES_ACCOUNT, DEFAULT_INCLUDE_IN_ROLLUP_FLAG, INVENTORY_ITEM_STATUS_CODE,
INVENTORY_PLANNING_CODE, PLANNING_MAKE_BUY_CODE, FIXED_LOT_MULTIPLIER, ROUNDING_CONTROL_TYPE, CARRYING_COST, POSTPROCESSING_LEAD_TIME, PREPROCESSING_LEAD_TIME,
FULL_LEAD_TIME, MRP_SAFETY_STOCK_CODE, FIXED_DAYS_SUPPLY, RESERVABLE_TYPE, VENDOR_WARRANTY_FLAG, SERVICEABLE_COMPONENT_FLAG, SERVICEABLE_PRODUCT_FLAG,
PREVENTIVE_MAINTENANCE_FLAG, PRORATE_SERVICE_FLAG, INVOICEABLE_ITEM_FLAG, INVOICE_ENABLED_FLAG, MUST_USE_APPROVED_VENDOR_FLAG, OUTSIDE_OPERATION_FLAG,
COSTING_ENABLED_FLAG, AUTO_CREATED_CONFIG_FLAG, CYCLE_COUNT_ENABLED_FLAG, ITEM_TYPE, SHIP_MODEL_COMPLETE_FLAG, MRP_PLANNING_CODE, RETURN_INSPECTION_REQUIREMENT,
EFFECTIVITY_CONTROL, CHECK_SHORTAGES_FLAG, EQUIPMENT_TYPE, WEB_STATUS, BULK_PICKED_FLAG, LOT_STATUS_ENABLED, SERIAL_STATUS_ENABLED, LOT_SPLIT_ENABLED,
LOT_MERGE_ENABLED, DUAL_UOM_CONTROL, SERV_BILLING_ENABLED_FLAG, LOT_TRANSLATE_ENABLED, DEFAULT_SO_SOURCE_TYPE, CREATE_SUPPLY_FLAG)
Values
   (0,'DELETE',1,464852, 102, TO_DATE('01/11/2007 16:15:11', 'MM/DD/YYYY HH24:MI:SS'), 3443, TO_DATE('08/24/2006 14:13:03', 'MM/DD/YYYY HH24:MI:SS'), 3443, 21069398,
'N', 'Y', 'pentaseal 6 X 320 SL-807202 Klockner', 4223, '0006320161', 'No', 'No', 'MRPM', 'N', 'Y', 'N', 'N', 'N', 'N', 'Y', 'N', 'Y', 'Y', 'N', 'N', 'N', 'N', 'Y',
'Y', 'Y', 1, 'N', 'Y', 'N', 'WARNING', 'Y', 'Y', 'N', 3, 0, 20, 'WARNING', 'Y', 'Y', 5, 5, 'WARNING', 3, 1, 2, 1825, 1, 2, 2, 2, 10, 4, 1, 0, 0, 1, 'B', 'N', 4, 'N',
'N', 'N', 'N', 2, 'EA', 'EACH', 3, 12916, 14296, 'Y', 'Uncosted', 6, 1, 100, 1, 2, 0, 5, 50, 1, 20, 1, 'N', 'N', 'N', 'N', 'N', 'N', 'N', 'N', 'N', 'Y', 'N', 'Y',
'CMPC', 'N', 3, 2, 1, 'N', 2, 'UNPUBLISHED', 'N', 'N', 'N', 'N', 'N', 1, 'N', 'N', 'INTERNAL', 'Y');---------

Hi,
You have to use the delete item utility of Oracle Inventory.
Responsibility: Inventory Superuser or similar
Navigation: Items -> Delete Items
Enter a meaningful name in the Group field.
Type - Item
Select the organization you want to delete the item from.
In the details section, enter the items you want to delete.
Once all the items entered, click on the "Chcek Group" button. This will validate whether the items you have entered are eligible to delete (i.e. whether any child record such as transactions exist).
It will submit a concurrent program and once the program finishes you will be able to see the result in the Results tab.
Finally click on the "Delete Group" button to delete the eligible items.
Thanks,
PS.

Is it safe to purge / delete older records from AUD$ table in SYS schema

Similar Messages

Maybe you are looking for