Is it safe to update software to v4?

I've been avoiding updating to iPhone software v4 (iOS4) on my 3G because of all the terrible feedback on this forum. I imagined that at some point Apple might sort it out. Is it safe to update yet or should I stick with what I've got?

Don't upgrade 3G to iOS4.
I have had numerous conversations with Apple staff by phone, email and at two Apple Stores and, whilst they all admit to the problem, no one has a fix. One Apple Store member of staff told me his 3G is "slow as a slug with iOS4" but he didn't mind as he was getting an iPhone 4 the following week.
None of the suggested ideas re: resets, restores, close windows, etc., make the slightest difference. It also appears that the problem is worse on older 3G phones.
Apple have screwed up big time. They would have known about this from beta testing (if they didn't, then they should outsource their beta testing) but they chose not to inform the public.
It's atrocious and I expected better from them.

Similar Messages

  • Safe to update software?

    I have an '08 White Macbook that has never had any problems with the WiFi that so many on here have.
    The software update has numerous updates besides the update to OS X 10.5.6 which I will not do because that will hose my WiFi for sure.
    Can I update the rest of the items without harming my WiFi?

    Welcome to Apple Discussions!
    The only way you can guarantee you won't harm your WiFi, is to keep a backup before upgrading. That way, if you need to revert to a previous version because of a software conflict, you can always do so. My backup FAQ* discusses this:
    http://www.macmaps.com/backup.html
    Upgrade because you need to upgrade, not just because an update exists. My upgrade FAQ discusses other means of avoiding update failure*:
    http://www.macmaps.com/upgradefaq.html
    - * Links to my pages may give me compensation.

  • Is it safe to update newer version of software to a factory unlocked iphone 4

    is it safe to update newer version of software to a factory unlocked iphone 4

    não recomendo o meu travou o audio

  • My iphone4 requires a software update. My phone was backed up automatically at 00:24 on 28/4/2013. Will it be safe to update and not loose any apps, photos and videos?.

    My iphone4 requires a software update. My phone was backed up automatically at 00:24 on 28/4/2013. Will it be safe to update and not loose any apps, photos and videos?.

    http://support.apple.com/kb/HT4137

  • Itunes wont open after updated software last night

    iTunes wont open up on my Mac after I updated software last night

    Hey there Nedswan,
    It sounds like you are unable to open iTunes after it updated recently. I would check for 3rd party plugins that may have lost compatibility when the software was updated first:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/ts3430
    you can disable any third-party plug-ins by opening iTunes in Safe Mode:
    OS X: Hold down Option-Command.
    You should see this message before iTunes starts up: "iTunes is running in Safe Mode. Visual plug-ins you have installed have been temporarily disabled."
    Note: This is different than Safe Boot or Safe Mode for Mac OS X. You may need to test both at the same time to isolate all third-party interference.
    Click Continue and see if any issues persist. If your issues are resolved with iTunes running in Safe Mode, check the following:
    Consult the vendor of any plug-ins you installed to see if they're compatible with your version of iTunes and check for any updates that may be available.
    Close iTunes and move third-party add-ons to the Desktop to troubleshoot the behavior. iTunes stores these plug-ins and scripts in these locations:
    Mac: /Users/username/Library/iTunes/iTunes Plug-ins/
    /Library/iTunes/iTunes Plug-ins/
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Please Help!!! 'iTunes cannot connect to iphone update software server'

    I cannot 'Restore' iPhone 3G to pass on to my fiance, after she kindly allowed me to get a new iPhone4 because iTunes 'cannot connect to iphone update software server'. I have tried both our laptop and desktop - both connecting to the internet fine - but neither will connect to the iTunes store nor update servers!!
    Not sure what to try next, have tried setting up new user to no avail.
    I have followed the support guidance and I am not connected through proxy.
    Diagnostics reported as follows:
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Dell Inc. Dell DV051
    iTunes 9.2.1.5
    QuickTime 7.6.6
    FairPlay 1.8.20
    Apple Application Support 1.3
    iPod Updater Library 9.2d4
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.1.0.62
    Apple Mobile Device Driver 1.49.0.0
    Bonjour 2.0.2.0 (214.3)
    iTunes Serial Number 098625257EFAC14A
    Current user is an administrator.
    The current local date and time is 2010-07-25 12:16:28.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Video Display Information
    Intel(R) 82915G/GV/910GL Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {F45A9B15-8BE6-4964-8534-71947B51A91B}
    Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.77
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: No
    DHCP Server: 255.255.255.255
    Lease Obtained: Thu Jan 01 00:00:00 1970
    Lease Expires: Thu Jan 01 00:00:00 1970
    DNS Servers: 192.168.1.1
    192.168.1.1
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-07-25 10:25:45.
    ** Device Connectivity Tests **
    iPodService 9.2.1.5 is currently running.

    Right, I'm going to try something, if this works, then this'll probably fix a lot of iTunes problems.
    1: Make sure your whole iTunes database is backed up.
    2: Uninstall iTunes, then run "Revo Uninstaller", this will remove ALL traces of iTunes from you computer, not your library.
    I've found out that when un-installing or re-installing over a previous version of iTunes will carry over some problems from previous versions, or even create problems. Registry leftovers can be a problem also. Completely removing iTunes using "Revo Uninstaller" then re-installing will have the same effect as installing iTunes from a fresh OS install. Typically iTunes should be problem free when installed totally fresh.
    3: Re-install the correct version of iTunes fresh and try again.

  • Is it safe to update my iphone 4s to ios 7.1.1

    is it safe to update my iphone 4s to ios 7.1.1

    Well mine is a brick now because of it. Since the exact day of updating my 4S has been a mess.
    https://discussions.apple.com/message/26093562#26093562
    I watched it charge up in 20% increments at first. Switching plugged and unplugged status while plugged in.
    Took it in to Verizon and they told me the phone looked fine and the battery tested fine. Noted they were seeing a lot of people coming in with similar issues. Associates claimed it was something in the software.
    A few weeks later my phone has managed to drop its charge while plugged in and is now a paperweight.
    I don't advise it. If you look close enough there are several people reporting the same or similar issues since updating. Simple Yes and No responses are just presumptuous.

  • Is it safe to update my iOS 5.0.1 (9A405) to iOS 5.0.1 (9A406) on my iPhone 4S?

    I have an iPhone 4S and its not jailbroken. So just wanted to know few things about :
    Is it safe to update iOS 5.0.1 (9A405) to iOS 5.0.1 (9A406) on my iPhone 4S (because i heard theres some link with the hackers or something)?
    What is Siri Port?
    Will this update solve my battery drainage issues ?
    Why doesn't this update show up when I look out for software update on my iPhone or on iTunes?
    And does the update have issues already (like SIM recognition problem or something)?
    Please help! Thanks in advance.

    http://support.apple.com/kb/ts4148

  • After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

    After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
    capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 4
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • 10.4.9 and hard drives - safe to update ?

    I have 2 external LaCie hard drives - is it considered safe to update to 10.4.9 at this time - I have seen threads concerning hard drives not mounting after updating

    The safest thing to do is disconnect all peripherals prior to updating. Also be sure to follow this procedure:
    How to Install OS X Updates Successfully
    A. Repair the hard drive and permissions:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a bootable backup of your current working system:
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    C. Important: Please read before installing
    1. If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    2. You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.
    D. Download and install update(s):1. Use Software Update, or
    2. Download standalone updater(s).
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • UPDATE SOFTWARE ON A MAC PRO THEN IT WILL NOT REBOOT

    Dear All,
    I have just updated software on my daughter's laptop and when the machine starts to reboot, it gets stuck on the white screen with the apple logo and the wheel running
    Help - she needs it urgently for a project
    William COtterell

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • If i unplug my iphone while its "updating software" will it restore the old software? or is this a bad idea?

    if i unplug my iphone while its "updating software" will it restore the old software? or is this a bad idea?

    It's a bad idea. It *ought* to recover OK, but there are too many cases where it hasn't to be safe assuming that it will.
    If, as Changren Yong says, you have a good backup, you always have the safety net of a restore, but it's a silly thing to do,
    My advice when doing software updates is to download separately then update (you're always offered an option to download only). You can do what you like during the download, which is always the ling part of the process for me. The update usually (for me) only takes about 5 minutes.
    One further point - in case you didn't know, you can initiate a backup by right-clicking the phone in iTunes and choosing Backup from the drop-down. That should always be part of your update process

  • Update software not working

    When I tried to run software update on my imac one of the updates was the actual update software program. I downloaded and installed that. I ran the "update software" again and it told me I had 4 updates but when I tried the "update all" nothing happened. Is there something else to try?

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. This feature is transparent to the user, but internally Apple calls it "XProtect." The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
    Gatekeeper has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's oversight of the App Store.
    For more information about Gatekeeper, see this Apple Support article.
    4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore reduces to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    “Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    5. Java on the network (not to be confused with JavaScript, to which it's not related) is a weak point in the security of any operating system. If a Java web plugin is not installed, don't install one unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability and poor performance.
    By modifying the system, the software itself may create weaknesses that could be exploited by malware attackers.
    7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so can corrupt the Mail database. The messages should be deleted from within the Mail application.
    ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. If you don't need to do that, avoid it. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    8. The greatest danger posed by anti-virus software, in my opinion, is its effect on human behavior. When people install such software, which does little or nothing to protect them from emerging threats, they get a false sense of security from it, and then they may do things that make them more vulnerable. Nothing can lessen the need for safe computing practices.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use.

  • Updated software on Macbook Air and bootcamp partition disappeared.  Windows boot option no longer appears.  Can I get it back and the data?

    Updated software on Macbook Air and bootcamp partition disappeared.  Windows boot option no longer appears.  Can I get it back and the data?

    Amy, is there a chance they could both be Syncing to another device that has the data erased?
    What are the sizes & modification dates on the files you found?
    Could be many things, we should start with this to be safe, though 2 different ones would seem unlikely to be this problem...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts, is it only from my device or the updated software should be adjusted?

    I have the IPhone 4 , after updating the software to version 5.0 , i can't edit my contacts anymore(the button edit doesn't exist anymore), is it only from my device or the updated software should be adjusted?

    That's exactly right.  And since you have a MacBook Air (as I do), that means the synching should occur just fine (if you've set it up right in iTunes).  In other words, once you actually do the update, the iTunes on your MacBook Air will re-sync your photos back to your iPhone.
    Basically, the process is that your iPhone gets backed up, wiped clean, then the new iOS version gets installed, then the backup gets restored.  That will restore everything in the article above, which does not include your photos.  But the sync process that happens after the iOS installation would restore your photos from iPhoto given you've set it up that way in iTunes.
    When you have your iPhone plugged into iTunes, while looking at the iPhone's summary page, click "Photos" on the right side of iTunes to see how you have your sync set up.
    Regardless, it sounds like you'll be fine!  Your photos will wind up in iPhoto once you place them there.  They will be safe there.

Maybe you are looking for