Is Java absolutely necessary to get into xi??

hi ,
is Java absolutely necessary to get into xi?? i know a little bit of core java but not advanced  topics.. advice??
Message was edited by: SDN PI/XI Forum Moderator
        Kenny Scott

Hi,
Advance java knowledge is not required ususally, adavance java is required if you have a requirement which is not satisfied by graphical mapping then you go for advance java mapping but if you have core java knowledge then you can use that one in XI.
I suggest you first read the theory about XI:
If your new SAP XI , then its better to read TIBIT. Below are the links of TIBIT
which are very helpful in understanding the End-to-end process of XI. And you can even do some exercies here which very helpful.
And of course u have documentation abt adapters
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Refer the below link for understanding the different adapters.this is very helpful.
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
Below are the different scenarios which will help you in understanding the adapters.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Thnx
Chirag Gohil

Similar Messages

  • When get into ESR ,,error - java.lang.NoClassDefFoundError

    Hi expert!!
    I got the error ( java.lang.NoClassDefFoundError) when getting into ESR..
    for the detail , occured after clicking logon buttom.
    the error  occured when getting into ESR only. no problem with  ID, RWB, SR, SLD, NWA.
    i used JDK 1.6 with my laptop, but once got the above error,
    i tried to change JDK 1.6.0_24  to 1.5.0_22, but same happened.
    restore achives and generate new signature  didn't help this error.
    all of host on exchange proflie used FQDN.
      the following is for components info regarding PI 7.1
    =========================================================================================
      sap.com SAP-XIAFC    1000.7.11.0.0.20081028231200 SAP AG
      sap.com SAP_BUILDT  1000.7.11.0.0.20081028231700 SAP AG
      sap.com SAP_XIAF      1000.7.11.0.0.20081209013800 SAP AG
      sap.com SAP_XIESR    1000.7.11.0.0.20081209013800 SAP AG
      sap.com SAP_XIGUI     1000.7.11.0.0.20081028231200 SAP AG
      sap.com SAP_XITOOL 1000.7.11.0.0.20081209013800 SAP AG
    thanks
    bangbang

    Hi,
    Please clarify:
         Are you getting this error in a freshly installed system or in the system which was working fine earlier?
         Have you done any patching or upgaradationd recently?
    Please refer to the sap notes below which may help to resolve your issue:
    #1515991
    #1452561
    Regards,
    Naveen.

  • Is an isbn absolutely necessary for paid iBook

    I am setting up a Paid iBooks account, and want to know whether it is absolutely necessary to get an ISBN for the title?? The guidelines say that it is not required, though I'm not sure whether it is not required only for the free books, or whether i coudl also publish a paid book without.
    Thanks in advance

    Posted in error.

  • I have Java set up as a plug in but cann't get into yahoo games. Where is the firefox button when I have the browser open? Only button I see gives me close, resize,

    I have java installed and properly working as a plug in. Why can I not get into Yahoo games and play Card Games? Where is the firefox button when I have the browser open? Only button that looks like anything for firefox allows me to restore, move, size, minimize, maximize, and close. That button is top left hand corner location.

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • [svn] 4939: * Some changes necessary to get the improved SWC cache working in Flex

    Revision: 4939
    Author: [email protected]
    Date: 2009-02-12 10:07:37 -0800 (Thu, 12 Feb 2009)
    Log Message:
    * Some changes necessary to get the improved SWC cache working in Flex
    Builder 4 and some potential bug fixes.
    tests Passed: checkintests
    Needs QA: YES
    Needs DOC: NO
    Bug fixes: SDK-18905
    API Change: NO
    Reviewer: Pete F.
    Code-level description of changes:
    tools/oem/Library.java
    Modified link() to pass the file name into SwcDynamicArchive's
    constructor even when using an OuputStream, so the file name can
    be used as a cache key.
    Added refreshLastModified() so Flex Builder can update the
    timestamp in the SWC cache after writing it's OutputStream to the
    SWC file.
    tools/oem/Builder.java
    Added setSwcCache().
    tools/PreLink.java
    Modified postRun() to use the value returned from
    ResourceContainer.addResource() instead of the value passed in,
    because it could be different. This might fix SDK-18493 and
    SDK-17840.
    compiler/PersistenceStore.java
    Modified readCompilationUnit() to also use the value returned from
    ResourceContainer.addResource().
    compiler/CompilerAPI.java
    Modified updateDependentLastModifiedTimes() to check for a null
    CompilationUnit.
    compiler/swc/SwcDynamicArchive.java
    Added path param to OutputStream based constructor to be used as a
    cache key.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18905
    http://bugs.adobe.com/jira/browse/SDK-18493
    http://bugs.adobe.com/jira/browse/SDK-17840
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/PersistenceStore.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcDynamicArchive.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcGroup.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Builder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/LibraryCache.java

    I figured out what was going here.  When I was statically linking my copy of textLayout.swc, it wasn't being loaded soon enough and the other parts of the framework were barfing because they couldn't get at the TextContainerManager class when they expected to find it.  What I have done to solve the issue is created a custom SystemManager which forces the TextContainerManager class to be loaded sooner.  This does increase my file size a bit, but not nearly as much as having to statically link all of the framework's libraries! Here is a short example app of what I did for anyone curious:
    main.Main.as :
    package main {
         import spark.components.Application;
         [Frame(factoryClass="main.CustomSystemManager")]
         public class Main extends Application {
              public function Main() {
                   super();
    MainApplication.mxml :
    <?xml version="1.0" encoding="utf-8"?>
    <main:Main xmlns:fx="http://ns.adobe.com/mxml/2009"
         xmlns:s="library://ns.adobe.com/flex/spark"
         xmlns:mx="library://ns.adobe.com/flex/mx"
         xmlns:main="main.*">
    </main:Main>
    main.CustomSystemManager.as :
    package main {
         import mx.managers.SystemManager;
         import flashx.textLayout.container.TextContainerManager;
         public class CustomSystemManager extends SystemManager {
              public function Custom Manager() {
                   var c:Class = TextContainerManager; // force the inclusion of this class
                   super();
    I found a lot of good information for using a custom system manager (in the context of making your preloader a bit shinier here: http://custardbelly.com/blog/?p=211

  • I have a question on how guest can still get into my computer when I deleted that.  Plus took files of mine, change names in my phone book.  Lets say they are messing with me.  It is driving me a bit nuts.  Help?

    Hello, I have a question on "quest".?????     I have someone getting into my computer. I have shut of the quest... and yet yesterday all of my files were stolen.  My phone book, someone goes in and changes my phone number, and just changes so many things around.  It really has me upset.  Please... tell me how I can keep "guest"  out for good. I bought this computer for me.  Not guest, yet all I see here on the apple ways is how others can hook in, or get in to our computers. 
    Its upsetting, and  to see how you give step by step instruction to help them get into other people's computers is upsetting, yet not much on how to keep them out.  Tell me just how to keep them out for good.  I have a hacker, in mine.  Stealing things.  I have cleaned my computer out three times, in the last few weeks. I get all set up, to only three days later, even with a new list of passwords, their back again, stealing.  Please Help me  Morgiegal

    Data rate DOES make a difference, but I'd say your real problem has more to do with the fact that you're working on a Powerbook. Motion's real time capabilities derive from the capability of the video card. Not the processor. Some cards do better than others, but laptops are not even recommended for running Motion.
    To improve your workflow on a laptop will be limited, but there are a few things that you can try.
    Make sure that thumbnails and previews are turned off.
    Make sure that you are operating in Draft Mode.
    Lower the display resolution to half, or quarter.
    Don't expect to be getting real time playback. Treat it more like After Effects.
    Compressing your clips into smaller Animations does help because it lowers the data rate, but you're still dealing with the animation codec which is a high data rate codec. Unfortunately, it sounds necessary in your case because you're dealing with alpha channels.
    The data rate comes into play with your setup trying to play through your USB drive. USB drives are never recommended for editing or Motion work. Their throughput is not consistent enough for video work. a small FW drive would be better, though your real problem as I said is the Powerbook.
    If you must work on the powerbook, then don't expect real-time playback. Instead, build your animation, step through it, and do RAM previews to view sections in real time.
    I hope this helps.
    Andy

  • Can't get into BIOS on new Z97M-G43 Mobo

    I just received all the components (below) for a new build.  When I power the system up, I get a screen with the following:
    EFI Shell Version 2.31 [4.633]
    Current running mode 1.1.2 Map: Cannot find required map name
    Press Esc in 5 seconds to skip startup.nsh, any other key to continue
    Regardless of what I do, I cannot get into the BIOS.  I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
    I removed all non-necessary connections - USB, HDD, DVD.  The only things connected are power and the front panel power, reset and LED.
    When I remove 2 of the 4 memory modules and restart, I get a message saying that the CPU or memory changed and to press F1 to go into setup.  When I press F1, I only get a black screen.  I also get a black screen if I press DEL repeatedly after turning on the system.
    I am using a HDMI connection to my monitor.
    What is the magic to get into the BIOS, or does this suggest something is wrong with the Mobo?
    Many thanks!

    Quote
    Regardless of what I do, I cannot get into the BIOS.  I have tried clearing the CMOS using the procedures documented here on the forum - both removing the CMOS battery and by using the jumper, both with the power off.
    remove power cord from the PSU 1st
    then do >>Clear CMOS Guide<< and retest
    Quote
    MEM: GSkill 4x4gb F3-14900CL9D-8GBXL
    also try with 1 memory stick only

  • HT1212 i forgot my password for my ipod. how do i get into it

    i forgot my password how do i get into my ipod

    Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Backing up, updating, and restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
    You can redownload iTuns purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

    i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

    Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
    Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
    Tough without the Install disc, but some things to try...
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    Tough without the Tiger Disk problems, but try fsck...
    To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
    1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    2. At the command-line prompt, type /sbin/fsck -fy
    (SPACE between fsck AND -fy important)
    3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:

    The volume (name_of_volume) appears to be OK 
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED ***** 

Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
    Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    Does it boot into Open Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)
    Have you done a PRAM reset, CMD+Option+p+r...
    http://docs.info.apple.com/article.html?artnum=2238

  • My daughter forgot her passcode number and cannot get into her phone

    My 14 year old daughter forgot her passcode and can not get into her phone. What do i do?

    Connect the iPhone to your computer and restore via iTunes. Place the iPhone in Recovery Mode if necessary to allow the restore.

  • Handing over site files to client: absolutely necessary?

    I recently had a client ask me for the "access code" to his site; I told him such a thing didn't exist and if he wanted to update his own site he could purchase a CMS. While Contribute is another option, it is money detoured from me to Adobe, notwithstanding repairing broken sites. My question is, since web design is a service, not a product, is it absolutely necessary to hand over the site files to the client? I don't think a client can access a site using an open source FTP client such as Filezilla without 777 permissions, and I refuse to give these for security reasons.... Does anyone stipulate this in the web development contract or is it merely understood?...

    Unless otherwise stipulated, I consider my client to be the owner of the finished files for the web site.
    But I suspect this may be a hosting issue. There are a lot of commercials on the radio advertising hosting for only $4.50. When I hear these radio spots, I think, "I wonder if my clients are going to get any ideas." The ones I have heard came from GoDaddy. There's no question in my mind that if one of my server-illiterate clients every tried to do their own hosting with GoDaddy, it would turn out to be a nightmare for them.
    Recently, I received an email from a client that told me that she got a really good offer for hosting. I told her that her hosting with me included basic maintenance and this:
    "... you are saving money if you host it yourself as long as you have the proper software to upload your files and then you might need other software to make any changes to your web site or pay a web design company to do it. You also need to know a little about web servers. I suspect the hosting that you are being offered is by a hosting company that is just renting you space on a server but not actually doing any work for you—you will have to do everything yourself. So, it’s really not the same web hosting that we do, but if you want to switch over, I will send you the FTP information when you are ready so you can download your files from my server."
    She ended up sticking with me.

  • Not sure to get into BI or not, analysing how difficult it is

    Hello friends,
    Please provide some information to make an informed decision.
    I am currently working as a SAP Operator where my duties include
    •     Monitoring the SAP systems (sm37,db02,sm66,su01) majority of them being BASIS transactions
    •     XI monitoring via SXMB_MONI, checking inbound and outbound queues (smq1, smq2)
    Although my question has nothing to do with my job responsibilities, I wanted you to know my work experience
    I have 3 months of some experience in SAP SD end user….
    The other day I told my friend I intend to do SAP SD certification to work as an SD consultant and he goes why don’t you get into BI, as it is very much in demand which made me thinking that he is right.
    He justified it by telling SD has been since long and BI sits on Net weaver platform which is a new technology probably around 2003.
    In an article by Jon reed he recommends it as a hot skill to have for 2008
    My question is
    •     What skills should one have to be a good BI Consultant (like good logic, understanding etc)
    •     How technical is BI
    •     Is programming involved with BI?
    •     Is it too difficult or you could get along with it in time?
    •     What is your recommendation and suggestion?
    Thanks heaps for reading the above….

    Hi Rasiq,
    Warm Welcome to BW...
    • What skills should one have to be a good BI Consultant (like good logic, understanding etc)?
    -->BW Consultant should be able to understand the Business first and then he should be capable in create/maintain Business logics. The main thing is he/she should understand the Functionality of the Business well and Implement the same with his BI skills.
    • How technical is BI?
    -->BI is both technical and functional one. One should develop logic how to generate reports based on the implementation of the business. You need to write some ABAP routines which help your work more effective.
    • Is programming involved with BI?
    --> Yes, Programming is involved in BI. As i said, ABAP routines play major part in BI. You need not to know much about ABAP but little knowledge about that is necessary.
    • Is it too difficult or you could get along with it in time?
    --> One may face difficulty during initial stages but if they get command over the tool, you can have Fun at work. You can easily cope up with the tool as you have some experience in SAP other modules.
    • What is your recommendation and suggestion?
    I suggest you to attend BI Training by SAP Labs which helps you the most and you can get the most of it. The duration of the training will be 5 Weeks if you go for the whole BI. For time being, refer the below URL's which helps u lot.
    First you need to concentrate on Modelling part. For that i hope these links will helps you.
    Modeling:http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a60cae07211d2acb80000e829fbfe/content.htm
    Data Acquisition:http://help.sap.com/saphelp_nw70/helpdata/EN/e9/6bf2d90e533f409ee56d3f586c325a/content.htm
    Transformation:http://help.sap.com/saphelp_nw70/helpdata/EN/f8/7913426e48db2ce10000000a1550b0/content.htm
    Data Distrubtion:http://help.sap.com/saphelp_nw70/helpdata/EN/c5/85e5414f070640e10000000a1550b0/content.htm
    Data Warehouse Management:http://help.sap.com/saphelp_nw70/helpdata/EN/20/a894ed07e75648ba5cf7c876430589/content.htm
    Data Warehousing: Step by Step:http://help.sap.com/saphelp_nw70/helpdata/en/fc/1251421705be30e10000000a155106/content.htm
    Then for Reporting...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/30d43b0527a17be10000000a114084/frameset.htm
    Check out the following links for BW 7.0
    http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
    /people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
    http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
    Almost All BI 7.0 Books and Material.
    bw 7.0
    Hope these helps u...
    Regards,
    KK.

  • How can I get into my ipod 5th generation if I forgot the passcode?

    How can I get into my ipod 5th generation if I forgot my passcode?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I cant get into my ipod cause i forgot the passcode

    i need help cause i forgot my passcode n can not get into my ipod what do i do????

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • Newbie question - Is it worth getting into SAP ?

    Seeing as this is still the only forum where a "Post New Thread" button is locatable, here's my opening question.
    I understand it takes study, certification and some years of experience to become a sought-after commodity in SAP.
    As an underpaid (never above $A40K) and under-employed IT worker over the past ten years, I've noticed that every time a SAP job is advertised, the salary is quite impressive. The most recent position, for a SAP Consultant, offered $A120K.
    To those of you who have been SAPping for a few years :
    Are you and your skills in demand in the job marketplace ?
    Do you receive reasonable or high pay ?
    What combination of study and experience (and connections ?) did it take to reach your current position ?
    For someone with broad IT experience, do you consider SAP worth getting into and, if so, by what route do you recommend entry ?
    That'll do for a start

    hi andrew,
    Are you and your skills in demand in the job marketplace ?
    Yes, SAP is hot these days, and will be for some years to come.
    Do you receive reasonable or high pay ?
    When compared to other fields and technical domains, the answer is yes.
    What combination of study and experience (and connections ?) did it take to reach your current position ?
    You need to have reasonable amount of IT exposure (which you have....!!!!) and a working expeirence in the functional domain is a must to rise. Technical expertise would boost your career great guns. Though after 2- 4 years in SAP , it is preferable to be a functional guy.
    For someone with broad IT experience, do you consider SAP worth getting into and, if so, by what route do you recommend entry ?
    Yes, it depends upon your type of IT experience. IF you have a good functional experience (say in domains like manufacturing, sales, or finance) pick up  a functional module study hard go for certification, and you are there in SAP world.
    With technical expertise you  need to have good ABAP knowledge, and with netweaver these days JAVA would also do, but with SAP having abap knowledge always helps.
    Same route here, study hard and go for certification and gian hands on experience.....and you are there to rock...!!!!
    Hope this answers your questions, Do reward

Maybe you are looking for

  • Challenges in deployment descriptors

    We currently have an EJB (called CD) that is contacted "remotely" by a web service (called CA) for some processing. The two (CD and CA) are deployed on different WLS8.1SP1 domains. CD is currently deployed as an EJB jar file (cd.jar) whereas CA is pa

  • IPhone 5 Battery & Data usage issues

    Here's my journey. I had the iPhone 5 from the day it was realeased. Was with Vodafone Australia. Phone was awesome. Coverage was an issue, so decided to swap to Telstra recently. Got new iPhone 5 with the change over. From the beginning, the new Iph

  • No print preview

    Office Jet 5742 has no print preview option. Anyway to attain this option?

  • Voiceover leaves audio on only 1 track??

    fce, using usb mic, 2 questions really... 1) i have used this mic before and it laid down two tracks of audio before say a3 and a4 but now only 1 track and i have read read read, tried everything even reset destination track ..any sugg?? 2) with only

  • Multiple Infoobject with same technical name

    Hi All, I have a very basic question which confuses me a lot. I have installed a BI content info cube 0SD_C03(Sales overview) and it is installed in Info Area -  ERP Analytics -->sales and distribution analyses. I checked the dimensions of it and 0cu