Is missing oratab file causing this issue?
OS Version : AIX 5.3
DB Version : 10g Release 2
I've just finished installing Oracle 10g R2 software(without a starter database). I want to create a database using a CREATE DATABASE script.But when i tried to log in as SYS i got the following error
SQL> connect sys as SYSDBA
Enter password:
ERROR:
ORA-12162: TNS:net service name is incorrectly specified
$ export ORACLE_SID=oradb4
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Wed May 28 06:07:20 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privilegesSo i created a password file using the following command
orapwd file=orapwdb4 password=mypassword entries=15But i am still getting ERROR: ORA-01031: insufficient privileges
In AIX the oratab file is present in /etc directory. But i can't find the oratab file in this location.Has this anything to do with the error i'm getting above? Do i have to run some other scripts to create oratab file. I had run roopre.sh at the initial stage of installation (according to the Oracle Documentation)
Your account is not the in the Unix dba group.
By default Oracle is linked with the dba group.
Any user in the dba group has sysdba privilege.
The password file has nothing to do with it.
Users in the dba group don't use the password file unless you disable the mechanism, by editing sqlnet.ora and making sure
sqlnet.authentication_services=(none)
However, this is not the default.
You have a faulty install because /etc/oratab doesn't exist.
More may be wrong, more likely is wrong.
In order to avoid troubleshooting a faulty install, please ditch it, and start all over again, this time reading the installation manual please.
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.
Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
For the past few weeks my computer will slow down when I have been on Safari for awhile, then freeze, and then just go black. I have to press the power button and then it goes to a black screen with the apple logo and a loading bar underneath when it reboots. I'm not sure what is causing the issue, but on my previous mac it would have an error message if something like this happened that I could submit. Any suggestions of where to start to solve this issue?
Thanks!These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I am using version 3.0.19 and have been for some time. This problem has just occured in the last couple of weeks and I can't figure it out. I have updated my addons, scanned for malware, etc etc but no luck. If I have 2 windows open at the same time it will close one but refuses to aknowledge any request to close the final window open... and yes this happens when I only have had one open. It's driving me crazy as it's soooo annoying to have to open taskmanager everytime I want to shut it down. Any help would be REALLY appreciated as I can't be the only one who has had this problem.... but please don't suggest I update to the newer version until I have this issue fixed as it will not let me simply update and I will have to overwrite my whole setup (which I'm not ready to part with yet)
THANK YOU in advance for ANY suggestions!
elcHi Tulips 14,
If you are having reoccuring Error 21 notices when trying to restore your iPhone, you may find the following article helpful, in particular the "Check for Hardware Issues" portion:
Apple Support: Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Regards,
- Brenden -
Hi, this is driving me mad, any help in identifying a fix would be so great!
I seem to get this all the time since i upgraded to OS X Lion, am now on Mountain Lion (OS X 10.8) and the problem is persisting - my PC hard ware is: 2.4GHz Intel Core 2 Duo, the Mac has 4GB of memory (667 MHz DDR2 SDRAM), it is using a ATI Radeon HD 2600 Pro 256 MB Graphics card.
The result is a kernel panic, leading to the system crashing and waiting for a remote debugger connection. I have attached the report below.
I should mention that post the Iion upgrade, i have taken my PC to the Genius bar and they have re-installed the OS - however it has not fixed the problem, despite the mac guys thinking it had.
Thanks,
Richard
Wed Aug 15 17:31:13 2012
panic(cpu 0 caller 0xffffff80030a276a): "pmap_pv_remove(0xffffff800db67000, 0x10e7ba000, 0x3bf9b, 0x800000003bf9b024, 0xffffff8081023da4, 0xfffffe8b2ecb3dd0): pv not on hash, head: 0xffff3c800db67000, 0x10e7ba000"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/pmap_internal.h:826
Backtrace (CPU 0), Frame : Return Address
0xffffff8081023ca0 : 0xffffff800301d5f6
0xffffff8081023d10 : 0xffffff80030a276a
0xffffff8081023dd0 : 0xffffff80030a2b25
0xffffff8081023e20 : 0xffffff80030669bc
0xffffff8081023f10 : 0xffffff800306a890
0xffffff8081023f40 : 0xffffff8003018aca
0xffffff8081023f70 : 0xffffff80030a5ad6
0xffffff8081023fb0 : 0xffffff80030ced13
BSD process name corresponding to current thread: coreservicesd
Boot args: debug=0x144
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x0000000002e00000
Kernel text base: 0xffffff8003000000
System model name: iMac7,1 (Mac-F42386C8)
System uptime in nanoseconds: 420955782538
last loaded kext at 261377962023: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7f84dc7000, size 65536)
last unloaded kext at 322673173946: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f842c3000, size 8192)
loaded kexts:
com.apple.filesystems.smbfs 1.8
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDA 2.3.0f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.ATIRadeonX2000 8.0.0
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleBluetoothHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.IOBluetoothHIDDriver 4.0.9f8
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD2600Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo nvram boot-args=""
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command. -
can anybody answer this question
Johnso,
Please complete your profile so we at least know a little more about your system, Apple has made quite a few 27" iMac models using different versions of OS X so it would be helpful to us if we knew the model you had and the version of OS X installed.
PLEASE complete your profile, you can find it under Your Stuff and Profile in the upper right of this page. -
Firefox has been running fine until this upgrade, but now I cannot lauch the client at all because it forces me to restart my machine.
Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo nvram boot-args=""
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command. -
My iphone 5c is unable to charge due to problems with the bottom where i insert the charger in order to charge the battery. what maybe the reason that my iphone will not charge unless it is placed at pacific angles and will only charge on certain days and at certain times of the day ?
check the lightning socket doesn't have any debris or fluff partially blocking contact
use air duster to blow out or very carefully, or a tooth pick ,best to use air to prevent any possible damage
if clear take it to an Apple store genius bar -
CS 5.5 coexist with CS 6.0 causes FrameMaker issue - can't import SVG file!
Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help!Due to some project demands, we installed Adobe CS back to 5.5 on a computer which has CS6.0 already installed. After the installation, everything worked in normal except one problem - we could not import SVG into FM file for all versions of FrameMaker on this computer.
Does the coexistence of CS 5.5 and 6.0 cause this issue? Or can CS 5.5 coexist with CS6.0 on a same machine? or any other reasons? Please comments!
Thanks in advance for your help! -
I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.
-
I setup an Apple ID account on computer but im not allowed to access account on iPhone. It keeps telling me this Apple ID has not been used in the iTunes Store. I was wondering what could be causing this issue? If anyone else has experienced this issue, how did you resolve it?
Hi TerrencefromNC,
Did you sign into iTunes on your computer with the Apple ID and authorize the computer?
Cheers,
GB -
Could this issue with not being able to copy and paste any image within the email body, be virus or malware related?
Though I don't think I have any virus problems. Also I have all the latest updates for Thunderbird.
I read some suggestions posted elsewhere and tried those but none of these worked :
DID NOT WORK #1 :
(If your Thunderbird email message is displaying strange-looking code (tags) after each link, images are missing (it looks like images have been stripped out), and the font appears different, or bold, then you’ve most likely changed the message body view inadvertently. To switch it back, simply:
Browse to View -> Message Body As -> and select Original HTML.)
DID NOT WORK #2 :
Email message looks fine, but doesn’t contain images
If the rest of your Thunderbird email message looks okay, but is missing images, or they appear to have been stripped out, it’s very possible that you’ve changed a setting that won’t let attachments (ie. pictures) appear inline (within the message body). To change this back, simply:
Browse to View -> and select Display Attachments Inline. )
DID NOT WORK #3 :
If you made the above changes to your Thunderbird settings and images still aren’t appearing in some of your messages, it may be that Thunderbird is blocking them because it thinks they are spam. To adjust your privacy settings and prevent the images from being stripped out, or not displaying at all (ie. being blocked), simply:
Click on the button to the above right of the email message asking you whether you would like to load images.
If the email message is from a trusted sender, you can click the link above the message specifying you would always like to load images in messages from this particular sender.
DID NOT WORK #4 :
If you’re still having troubles, or your changes aren’t being saved (ie. next time you open Thunderbird the images won’t display again) you can directly specify the default format Thunderbird should display email messages as in the config editor. To access it, simply:
Browse to Tools -> Options -> Advanced tab -> Config Editor
Search for mail.default_html_action and make sure it is set to 3 (allow original HTML). If you would like messages to open as text only (more secure, but you won’t see images, change the setting to 1).
Could you please suggest what possibly has caused this issue? Thank you for your time.Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email. -
Linked .eps files cause error in InDesign CS5
I upgraded to CS5 about 2 weeks ago and all is well except:
In 2 files so far, some (but not all) of the links to .eps files (within anchored image frames) show up as gray rectangles with crossed diagonal lines. In addition, I get the following error message in a pop-up box:
"Error encountered while reading TIFF image. Image may be damaged or incompatible. Resave the image with different settings and try again."
I was able to make one graphic reappear correctly (at least for now) by opening the .eps file in AI CS3 (the latest I have), resaving it as a .ai file and doing a new Place. Is this the best way to resolve this issue for the several dozen .eps files? Or is there something else easier I should try?
Any ideas what's causing this issue? Is it maybe a known bug?
Thanks,
John
PS: The .eps files were created with 3rd party software (Sibelius music notation software), but I've never before (CS3 and CS4) had a problem.I did NOT move the .eps files across a network (except that I have two computers in the same room and move files between them via an Ethernet hub in a Windows workgroup, but I assume you're referring to a LAN, which this is not).
Of course an Ethernet hub is a LAN! Absolutely! (LAN is a local area network.)
It's certainly a good idea to check to make sure the files are still the same, but if they still open in Illustrator, then they should work in InDesign.
(Moving files across networks, LANs or the Internet or what-have-you, should not corrupt them. But stranger things have happened.)
Also, you mention "tiny" PDFs...what? Generally speaking the PDFs should not be all that different in size from the eps files,
though it's possible for them to be both larger and smaller, depending. But why do you say "tiny"? I wonder if this may give us a hint about your problem.
Still, though, I wonder what I asked initially...can you boil this problem down to a small reproducible test case? -
Error message is not telling which field causing the issue!
Hello
I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
The Entered Value Is Not on the List of Valid Values. (I am guessing this error is talking about the DROPDOWN fields only)
I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
How can i trace and how can i fix it, pls. let me know
Thank youThank you for your tips.
But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
or is it Adobe's/Form's error?
Thank you -
I can't click on the icons at the top of a site. What's causing this?
I have firefox and it's having a strange problem today. When I'm on facebook, I can't click on the icons at the top. I can't click the message, friend request, notifications, home, profile icons and can't click the one that allows you to sign out. So i can't even sign out. What I mean by can't click is when I put the cursor over those icons, it doesn't change into the finger. When I left click it anyway, nothing happens. This doesn't happen in internet explorer, but I want to keep using firefox. What's causing this? I also noticed that this doesn't just happen on facebook. I've uninstalled and reinstalled firefox. I restarted the PC. It didn't help.
The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Does HP Proliant DL380 G4 work with Solaris 10?
Hi everybody!!! I�d like to know if anybody made HP Proliant DL380 G4 work with solaris 10. I didn�t find this server in HCL for solaris 10. has anybody tried to install solaris 10 on this server? tnx very much regards The player
-
Error in uploading data in infocube
Hi, We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client. At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier. Through analysis, we come to know that data flows thru PSA. but wh
-
Max delay and Min delay on same data path
Hello, I am trying to set up timing constraints (both max and min delay) on a data path between two combinatorial elements. I use set_max_delay -from [get_pins pin name] -to [get_pins pin name] 6 -datapath_only set_min_delay -from [get_pin
-
Can I upgrade to Mountain Lion with Boot Camp windows 7?
Can I upgrade my mac book pro to Mountain Lion when I have Boot Camp Windows 7?
-
OK, I understand that when you choose to edit a file in an external editor, Aperture creates a new master file, therefore the file you edit in Photoshop loses its association with the version from which it was originally created. But when you then ed