Is not equal to operator not working properly in obiee 11g

Hi ,
I have 5 members in a dimesion ENTITY.gen5 (A,B,C,D,E) .
nOW , I am using a *"is equal to "* operator in that ,
ENTITY.gen5 = A;B .
Which results in a strange error while running the report :
Socket communication error : was attempted on somthing which is not socket .
or sometimes ,
Socket communication error : Oracle BI server is not currently running .
So , I tried with giving "is not equal to" i.e . ENTITY.gen5 != C;D;E .
Then , I am getting A,B,C . C is not desired here .
FYI , I have renamed ENTITY.gen5 member names in essbase once and after refreshing I tried the above .
OBIEE version : 11.1.1.6
essbase version : 11.1.2.1
Thanks in advance

In EM, go to Weblogic Domain, right click on bifoundation_domain and on the Security menu choose Application Policies.
Set Application Stripe to obi and click the blue arrow search button.
Highlight BIConsumer and click Edit.
Under Permissions locate Resource Name oracle.bi.publisher.scheduleReport. Highlight this and click Delete...
Click OK (top right corner).
Now log your user out of OBIEE and back in again, and the option should have disappeared from their New menu.

Similar Messages

HT4061 My iphone 4s will not turn on, It was working properly and then I noticed the battery was a 1% and once i tried charging the phone it was unable to turn back on it's been two hours I already tried to reset but nothing works. I tried different charg

My iphone 4s will not turn on, It was working properly and then I noticed the battery was at 1% I then proceeded to charge my phone like normal but nothing happened. The phone was unable to turn back on it's been two hours I already, tried to reset but nothing works. I tried different chargers, my ihome nothing is working.

.

Why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done.

why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work

Hello there, bobbiefromIRL.
The following Knowledge Base article goes over some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

OBIEE Answe: Error when using "is not equal to/is not in" option in filters

Hi there,
I have a report with a column that uses EVALUATE function. I want to filter the results of the report by the values of this column. There's no problem when I use "is equal to/is in" option in the filter options. However with everything the same, when I try to apply "is not equal to/is not in" option I got an error message reading :
"Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value @{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]} from @{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]} does not match the specified format. (HY000)"
The column is the following funciton:
CAST(EVALUATE('pob.Get_PP_Status(%1, %2)',"ПРЕПИСКА".PP_ID, DATE '@{pv_Period_End}{@{system.currentTime}[YYYY-MM-DD]}' ) AS CHAR(500))
Do you any ideas where the problem might be?
Kind regards,
Danail

Thru note 1909504 the Function Module FI_TAX_CALCULATION was changed and caused the error on the system of my customer.
Hope that helps.
Regards
Udo

"image size could not be verified - operation not performed" when I go to restore to my hard drive. What do?

I want to restore my disk image using disk utility. I keep getting "image size could not be verified - operation not performed" when I go to restore to my hard drive. What do?
I would like to partition my disk but it says I have to restore my disk image first so that files can be moved. This is really obnoxiously hard for someone who is only moderately tech savy. Any help is appreciated, but please no links to 3rd party sites. I would like to keep this with the software I already have.
Thanks ^_^

Sorry nobody has replied yet, but how was this disk image made?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I'm using internet by nokia ovi pc suit via cable & on that opera browser working properly but i update my browser by mozilla but it is not working a msg is appear "unable to connect"

i'm usin internet by nokia ovi pc suite via cable &it is working properly in opera 10 but i update my browser to mozilla but on firefox it is nat working a msg apear "unable to connect" .I have changed all settings
suggested on site but the problem has not solve.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Not equal to operator in KQL i.e. for string comparison is not working. Is there any other approach for this?

In KQL my query is like this,
refinablestring05<>9c460541-5979-44ec-b0ab-63d1823f922f
but looks like operator <> not working. It is not throwing error at all and always shows result.
Any one can help me out for this?

use NOT operator so it would be "NOT refinablestring:something"
kashif

HP DV6500 Laptop - Not able to get sound working properly.

I had this running arch fine about a year ago, I just recently reinstalled Arch and everything is good except for the sound card, which is giving me fits. What I would be used to seeing in say, amixer, would be PCM, Front Center etc etc, now it only shows PC Speaker, BAseFRQ, and Master. Initially it would play sounds but made an -awful- screeching sound, after some tweaking and trying to follow some things on the wiki it just makes the screeching sound now and doesn't ever play the sound.
Running alsaconf does come up with hda-intel, Intel Corporation 82801H (ICH8 Family) HD Audio Controller, which sounds right, but it just doesn't seem to work properly.
Rather than flood the initial post with what may or may not be entirely useless information, if anyone can give me some commands to run to get any information that would help I'd appreciate it.

Vryali wrote:
I'm using Chakra, as well, if that helps :x
Thanks D:
Actually, that bit of information is the most important, remember you will help the Chakra project, and help yourself asking in their forums, they might just get the click on what is going on, or if this is a known issue. Even though we support community projects to be created, is not that easy to give support to users of community projects, as they might have introduced a change that makes it all behave differently.
My only advice would be to put "!snd_pcsp" (without quotes) in the MODULES array of /etc/rc.conf

DBTransactionStateListener not working properly in JDeveloper 11g TP4

Hi All
I've created a custom DCTransactionStateListener and implement transactionStateChanged(boolean state) method. When the db transaction state is being changed i set a parameter in the HttpSession. I need this in order to know if transaction is dirty.
In JDeveloper 11g TP3 it's working properly, but now i test it in TP4 and it's not working. The method is not called. I've tried with delete and modify existing rows, but the method transactionStateChanged(boolean state) was not called.
Please anyone give some help to resolve this.
Regards,
JavaDeVeLoper

In general, you should be able to reference the isTransactionDirty() property of the data control without needing to create your own custom listener here, but it looks like for the TP4 and later builds, if you do want a custom DCTransactionStateListener, you'll need to override the
package model.utils;
import oracle.adf.model.bc4j.DataControlFactoryImpl;
public class MyDataControlFactoryImpl extends DataControlFactoryImpl {
public MyDataControlFactoryImpl() {
protected String getDataControlClassName() {
    return MyCustomDCJboDataControl.class.getName();
package model.utils;
import oracle.jbo.common.ampool.SessionCookie;
import oracle.jbo.uicli.binding.JUApplication;
public class MyCustomDCJboDataControl extends JUApplication {
public MyCustomDCJboDataControl() {
    addTransactionStateListener(new MyDCTransactionStateListener());
public MyCustomDCJboDataControl(SessionCookie sessionCookie)
     super(sessionCookie);
     addTransactionStateListener(new MyDCTransactionStateListener());
}

Not Equals Function is not working in Mapping

Hi All,
i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
                        And Material Type Not Equals to "ZPRO" means
                                    then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
Please help in this
Regards

i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
And Material Type Not Equals to "ZPRO" means
then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
the logic applied is incorrect
NotEquals is a boolean function meaning it will accept only boolean values as input....
To check if the Material Number is ZPRO or not use the below logic
MaterialNumber                                            Then(FG)
                      ------equalS(TextFunction) ---- not -----ifWithElse ------------------ Target
Constant (ZPRO)                                                   Else(FC)
Regards,
Abhishek.

SQL query using not equal to or not exists

Hi All;
From the below table , i need to display the client name
where output is not equal to Pre Start, BA
but display client with output only with SOSP
so only in the below example DEF client name will be displayed
below is my query
select C.new_applicationformid,
C.clientname ,
C.new_noofappointments
From (
Select A.new_applicationformid ,A.new_programmecontractidname,Count(1) As Cnt
from FilteredNew_applicationform as a
full outer join filteredNew_Evidence as aa on (a.new_applicationformid = aa.new_relatedapplicationid)
Group By A.new_applicationformid ,A.new_programmecontractidname
Having Count(1) >= 1) A
Inner Join filteredNew_Evidence AA on a.new_applicationformid = aa.new_relatedapplicationid
Inner Join FilteredNew_applicationform C on C.new_applicationformid = aa.new_relatedapplicationid
Where ((aa.output in ('SOSP'))
and (aa.output not in ('Pre Start','BA') )
Any help much appreciated
Thanks
Pradnya07

See examples written by Joe Celko to help you out
CREATE TABLE PilotSkills
(pilot CHAR(15) NOT NULL,
plane CHAR(15) NOT NULL,
PRIMARY KEY (pilot, plane));
PilotSkills
pilot plane
=========================
'Celko' 'Piper Cub'
'Higgins' 'B-52 Bomber'
'Higgins' 'F-14 Fighter'
'Higgins' 'Piper Cub'
'Jones' 'B-52 Bomber'
'Jones' 'F-14 Fighter'
'Smith' 'B-1 Bomber'
'Smith' 'B-52 Bomber'
'Smith' 'F-14 Fighter'
'Wilson' 'B-1 Bomber'
'Wilson' 'B-52 Bomber'
'Wilson' 'F-14 Fighter'
'Wilson' 'F-17 Fighter'
CREATE TABLE Hangar
(plane CHAR(15) NOT NULL PRIMARY KEY);
Hangar
plane
=============
'B-1 Bomber'
'B-52 Bomber'
'F-14 Fighter'
PilotSkills DIVIDED BY Hangar
pilot
=============================
'Smith'
'Wilson'
SELECT DISTINCT pilot
FROM PilotSkills AS PS1
WHERE NOT EXISTS
(SELECT *
FROM Hangar
WHERE NOT EXISTS
(SELECT *
FROM PilotSkills AS PS2
WHERE (PS1.pilot = PS2.pilot)
AND (PS2.plane = Hangar.plane)));
SELECT PS1.pilot
FROM PilotSkills AS PS1, Hangar AS H1
WHERE PS1.plane = H1.plane
GROUP BY PS1.pilot
HAVING COUNT(PS1.plane) = (SELECT COUNT(plane) FROM Hangar);
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Urg: Not able to import data from DB in OBIEE 11g : Connection has failed.

Hi Team
Recently while working in OBIEE 11g , I was trying to import tables from the data-base but I am getting an error " Connection has failed " .
I have put the tnsora file in the network admin folder and the
C:\OracleBIHome\Network\admin
\OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
\oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
and have set the TNS_ADMIN variable in the User.cmd path with the above path .
But it is still not working . I have tried all the options but its still not working .
Any help is appreciated.
Regards
R

Is it Compulsory to give Schema and Work Schema while creating the Physical Schema in Oracle Data server?
This is mandatory to have a schema and a work schema here.
The schema and work schema could be the same user as the user who is connected to the dataserver!

Not getting connected to a data source in obiee 11g

Hi friends,
In OBIEE 11g I cannot able to import meta data into a new repository...
It is not connecting to data source for importing meta data
It throws the error like connection is failed....
I have also restarted the services and also checked for the odbc connectivity it is showing connection is
successful..
I also entered the corresponding details in TNS notepad...
These are the following details
TEST =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = 172.16.1.110)
(PORT = 1522)
(CONNECT_DATA =
(SID = TEST)
The data source name that i was given is ORCLBI for my reference...
Then why it is not getting connecting to the data source..Help me friends For importing tables to my repository as soon as it is connected to the data source...
Thanks
Harry...

Hi,
Go through venkat reply in this...May help you..Re: Cannot connect to Database from the OBIEE 11g upgraded RPD
Regards,
Srikanth

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

I have a basic applet method timing problem with Firefox (and Chrome), not IE nor Opera. Works if JavaScript issues windows.alert() prior, fails otherwise.

I have an applet method, which is invoked from a JavaScript function, that is triggered by the window.onload event. The problem seems to center in the loading of the applet and its methods.
If I step through the 3 applet acceptance prompts (I chose to use a down-level Java), the applet method is never invoked, nor is an exception raised. How this happens is beyond my understanding.
As additional information, the Init(), start(), and "desired" Java methods all use the synchronized keyword. This is an attempt to minimize the exposure to a multi-thread environment.
If I issue a message from JavaScript (via window.alert()) PRIOR to invoking the method, I can get the desired results in special circumstances:
1) When the alert is presented, Firefox also prompts, SIMULTANEOUSLY, to block/continue the applet (the first of the 3 applet acceptance prompts). I can accept that these are separate threads.
2a) If I walk through the 3 applet acceptance prompts FIRST, and then hit the OK button on the alert message SECOND, I get the desired results, my applet method executes, and all is well (other than the fact that I would prefer not to have the alert in place at all).
2b) If I hit the OK button on the alert message FIRST, and then walk through the 3 applet acceptance prompts SECOND, I get the same results as when the page loads WITHOUT the alert, which is the applet method is never invoked, nor is an exception raised. Weird, huh?
The above problem only occurs when the browser and the applet's URL are loaded for the first time.
Subsequent invocations (after the page & applet has been loaded initially) do not have the failing symptoms.
It is my understanding that IE and Firefox (and Chrome and Opera, for that matter) each use the same implementation of JavaScript provided by Microsoft. Please correct me if this information is inaccurate.
The failing page and it's applet are proprietary; I cannot provide the Internet URL, nor the Java or JavaScript source, to aid in your analysis.

I can speak to the source code, but have no access to it.
The current process/thread that invokes an applet method must check to see that the applet is not currently being loaded by another process/thread. If it is being loaded, the current process/thread should block until the load is complete, THEN attempt to invoke the applet method.
Please forward my concern to a knowledgable developer. The nature of the problem, once identified, can be addressed in a very straightforward manner.

Is not equal to operator not working properly in obiee 11g

Similar Messages

Maybe you are looking for