Is Officejet Pro L7590 2008 software compatible with Windows 8.1?

I've recently upgraded computers to a Lenovo K450e running Windows 8.1 64 bit. For the last 7years, my printer has run flawlessly on Windows XP, and most recently on Windows 7(installing the XP starter CD ). Now, I'd like to move it to the Lenovo. I haven't tried to install either the Windows XP starter CD or the Windows Vista starter CD. Anyone have any ideas as to which will be more compatible or am I about to encounter problems with either of these ? Any help is appreciated.

Hello ml163,
Welcome to the HP Forums.
I see that you are looking for software and driver for the printer on a Windows 8.1 computer.
Do not run the drivers disk for Vista or XP. Please click on the following link for the HP Officejet Pro Full Feature Software and Driver. This download is meant for Windows 8.1 64 bit. If you are connecting the printer to the computer with a usb cable, please do the download first and run the installation first. You will be prompted as to when to connect the usb cable by the prompts on the installation.
If you have any issues or any questions, please feel free to write me back.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

Acrobat Pro 9 is not compatible with Windows 7

Acrobat Pro 9 is not compatible with Windows 7. How do I upgrade my version?
Thanks,
John

Where did you get that information (other than Win 7 is not listed in the compatibility list)? I have been using AA9 on Windows 7 for several years (it is a 32-bit system). Did you try to install it or some other issue crop up? You may need to be sure you install the updates, but otherwise it should work. Even folks with AA8 have been successful on Win 7 (at least that is what they have reported), though they are likely to have some minor problems at times.
My Win7 came with Acrobat 9 when Win 7 first came out and has worked fine. If you have upgraded OFFICE to 2010 or later, then you would only be able to print, not use PDF Maker.
That being said, it is still a good idea to go ahead and upgrade. AA9 is the oldest version qualifying for the upgrade to AAXI.

How do I set up wireless printing of my Officejet Pro 8500 on a laptop with Windows 8?

How do I set up wireless printing from my all in one Officejet Pro 8500 printer to my laptop with Windows 8?

You can set up your printer for wireless pretty easily if you have the Full Feature Software installed on your computer for your printer. The setup is done as part of the installation.
Read through below, then select how you wish to proceed. There is a video to assist - see below!
Install Printer Driver / Software
If your printer stops working (and it’s not a hardware problem), it may be due to software or driver issues. There are tools to help you diagnose the problem and help documents to guide you to success.
You might just desire extra features for your printer, or need extra tools to help with scheduled maintenance.
In many cases, you can (re)install the Full Feature Softwarefor your printer to enhance its capabilities. The HP Solution Center is an integrated part of the FFS. For e-print, you will want the e-print software.
If you have the CD that came with your printer, use that to install your Printer software -- IF the CD is compatible with your current Operating System. If you do not have the CD, or if the software on the CD is outdated, then you can use the online installation tools.
(Re)install the basic driver or HP Printer Full Feature Software or other software for your printer:
Drivers control hardware connected to the computer (wired or wireless)
Software controls the programs that interact with the User
Go to the top of the forum page to Support and Drivers
Officejet Pro 8500 Series
Enter your Printer Model information, and then go to Software and Drivers...
Enter your Operating System in the Drop-down menu... Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the appropriate Basic Driver, e-print, or Full Feature Software, as appropriate
NOTE: You may also wish to download the Print and Scan Doctor and / or other Tools from Category - Utilities
Save the *.exe installation package(s) on your computer
Pay attention to the name and the location of the file(s) when you save the file(s). The file(s) will likely save to the "Downloads “folder.
You may remove your existing printer software with the following tool. Fixit is of particular use when the existing printer software is being replaced due to severe problems with the printing program.
Fixit -- Fix problems with programs that can't be installed or uninstalled
NOTE: If you have a recent working version of the Full Feature Software on your computer, you may opt to skip removing the existing printer software in the above separate step. During installation of your Full Feature Software, when the installer package detects the “old” printer software on your computer, the program will ask you to remove that old software: The program will then invoke an internal printer software removal program that is written to remove printer software. Once most of the old printer software is removed, you will be asked to Reboot your computer and log back in. After you log in, the final bits of the old printer program(s) are deleted and the new software will be installed. Depending on your system, the whole uninstall and install process might take as much as eight to twelve minutes.
Remember to Install the programs from Category Utilities first, if applicable, as these are smaller in size.
Install the downloaded Printer Software package last.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select ‘run as Administrator’ and install.
NOTES:
If using: Download and install the driver software before connecting a USB cable.
After the initial installation is complete, be sure to check for and install any relevant updates - check Category - Update. The Updates are important and can mean the difference between software that works as expected and software that does not work.
You may also wish to check for a Category named Firmware. Installation of any package in this Catagory is personal choice and must be based on the contents in the package and whether or not your printer is working as expected.
Extra help for setting up your Wireless Printer:
Reconfiguring your printer
Troubleshooting Your Printer - Network
Video Help for installing your Printer:
Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection
Kind Regards,
Dragon-Fur

Hp officejet pro 8500 wireless a909g scan with Windows 7

I have been using HP officejet pro 8500 a909g wireless with windows xp with no problems scanning. I got a laptop with windows 7 64 bit and cannot scan to the computer from the solution center software on the computer or from the display on the unit like I used to be able to do. When I try to scan, it says that it is scanning and then quits after a short time. Nothing happens with the scanner. The Solution Center also sees the document is loaded. I have tried the scanning software program to see if something is wrong but it says all is fine. What do I need to do?

There is a way to launch the scan application directly.
Go to c:\program files\hp\digital imaging\bin and double click on hpiscnapp.exe
See if you are able to complete a scan this way
If that doesn't work,
Rename the twain folder:
Navigate to C:\Windows and double click on it
Scroll down to the twain_32 folder, and rename the folder twain_32 old .
Then, Delete the whole Digital Imaging folder in the program files above and then do an install/reinstall which will repopulate the folder. NOTE: If you have multiple HP imaging devices (other printers, scanner, or cameras) Do not delete the Digital Imaging folder or you will need to reinstall those items.
I was an HP employee.
Kudos are appreciated if I have helped you.

Is Mac Pro (purchased in 2007) compatible with Windows 7

The support page says that the following is not supported for use with Windows 7
Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)
I purchased my Mac Pro in late 2007 and it has 2 Intel Xeon Dual-core 3GHz processors. Does this mean that I can't use Windows 7 on this Mac Pro?

Install is fine once you get past the boot screen.
And it is usually only 64-bit (I tried 32-bit and Apple's EFI limited us to 2GB RAM only, which is PITA).
This is where I first learned of possible solutions -
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx

Desktop publishing software compatible with windows and mac?

I am trying to help the kids at my daughter's school produce their own newspaper.
Apart from Word (which I can't get to do what I want!) is there anything out there compatible with both operating systems. The school PCs have MS Publisher 2003 installed. I am working on a mac using Quark and InDesign. I created the last newspaper for them but I'd like the kids to get more involved if possible and enable them to have some input when it comes to creating it. Other than having to do it myself or even worse invite 60 kids into my home is there anything out there?!!!

Hi Grace,
if you use QuarkXPress 7 or 8, you can actually legally install/activate *the same* license *on two* machines, even cross-platform. You are just allowed to use one installation concurrently.
So you could test it on Windows and if the student like it, a student copy is extremely cheap.
Hope this helps.
Regards
Matthias

HP Officejet Pro L7590 and Mac Yosemite 10.10 printing software

I just upgraded my Mac to a mew 2014 MacBook Pro with Retina and Yosemite 10.10.1.
I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (lights are on). What software do I download to install the printer? Is it not available for Yosemite yet? Where is it located? I'm assuming its not available for Yosemite yet? I don't have the original software. Thanks.
This question was solved.
View Solution.

Hi @rustyblue,
Welcome to the HP Forums!
Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
Hope this helps you get up and running, please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Officejet pro L7590 software/machine install procedure test

Just going to list a procedure I used to hook up an Officejet pro L7590 to my windows 7computer.
I need someone to try this out and tell me if it worked for them ( it worked for both of my computers ).
1...
- uninstall the printer if installed and use the HP unistall to remove the software.
- Reboot to complete the uninstall.
2...
- Download and install CCleaner and run it to repair registry issues.
3...
- Download and run "Windows Installer cleanup utility"
- "If you have the program installed, open it in Start - All Programs - Windows Install Cleanup. It then opens up and you should see a list of many program name. Please have a look there if you find the following entries "32/64 bit HP Cio installer", "bpd_scan", "scan". If you find this, please select the program and press the "remove"."
- Restart computer.
4...
- Search the computer C drive program files for the folder HP, look inside and if it has the folders marked CIO, Digital Imaging and software updater, then go back to the HP folder and delete it.
5...
- Load newest version of HP software
- at the review installation options box - click on "select software" then uncheck everything except for the top two and OCR then click on OK then Next.
- When the connect device now window opens check the box that says "unable to connect now" and hit next and then look for the install shortcut on desktop and make sure its checked then hit finish.
6...
- Restart computer
7...
- Use the desktop HP short cut "install new device".
- use USB connect and hit next
- When connect device now appears use the "connect using USB cable"
-Hit finish button
- Cancel the register product now window.
- Cancel the registration now window
-at the end of device install use "print test page" to confiem install
- NOW install more software using the button that says " More software "
-then press the "more" button and select the "Solutions center software "
-Click finish and exit.
8...
- Double click the HP Solutions desktop shortcut and test your new capabilities.
Please respond to tell me how it worked out ???
Thank you for testing.

Hi rvanwaning
You can use the cd or download the drivers and then plug the printer in when prompted to install the printer software. Here is a document for the different ways to install the printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282602&tmp_task=useCategory&cc=us&dlc=en&lang...
I have included the drivers link for you to download.
Win7 32 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Win7 64 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro L7590 networking problem

Hi!
I have the following problem:
I have an Officejet Pro L7590 All-in-one printer. It is connected to my wlan router (ASUS WL-500G Premium) through its ethernet port.
I have two desktop PCs, i've installed, and using this printer on them without problems. One of them runs on Vista, the other on Windows 7.
But i can't get it work with my notebook. It connects to the router through wlan (Intel WLAN 3945ABG adapter), runs on Windows 7. When i try to add the printer, the installer detects the printer on the network, but during the installation of the device, i get an error, that the device cannot be set up.
I have tried:
-Other (older and newer) versions of printer software.
-Updated printer's firmware, doesn't work either with the original, or the newest version, the problem is the same.
-tried with all firewall settings, it doesn't work even with fully disabled firewall (I'm using Eset 4.0, even tried to remove it)
Does anybody have some idea for this? Please help!

The following are the details about network printer problems in Windows 7:
    “Access is denied” Error
     Not getting Add Printer Wizard
     Choose compatible drivers
“Access is denied” Error
If the “Access is denied” error is showing up on the computer, just go through the steps to fix the error. First, open the Printer Wizard through the Control Panel. Select the ‘Add printer Wizard’, then click ‘Add a local printer’ and then click ‘Create a new port’. Make sure that local port is there in the list and then click ‘Next’. In the Port name dialog box, type computer name and printer name and then click ‘Ok’. Complete the wizard steps to finish the process.
Not getting Add Printer Wizard
In some cases, the Add Printer Wizard may not be available to you. At that time, just open the Printer Wizard through the Control Panel. After that choose the ‘Network Printer’ page and go through the ‘TCP/IP’ page and complete the additional steps in the wizard.
Choose compatible drivers
You need to choose compatible driver in Windows 7. First, you have to click the ‘Start’ button and select and ‘All Programs’. Then, go to ‘Accessories’ and select ‘System Tools’ and then click ‘System Information’. Then, you have to select the ‘System Summary’ and then review the OS Name and System type to find out which version of operating system you are running. Then, accordingly choose the network printer driver for your computer.
Set peace of mind as your highest goal,and organize your life around it.

OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

Unable to install Officejet Pro L7590 print driver in Windows 8.1

I have lost days of time trying to get my OfficeJet Pro L7590 to print properly and otherwise operate in a stable manner. My computer is a new Dell XPS8700 running Windows 8, upgraded to Windows 8.1 via the "Store" app after purchase. My problems started soon after the 8.1 update.
The primary problem symptom is the printing of about a half page of text fine, then the printer spits the page out and prints several more pages of mostly blank paper with random symbols around a top or side edge. This occurs regardless of the program doing the printing, i.e., MS Word, Excel, Acrobat, etc.
I have run the Printing Doctor program many times which doesn't fix anything, despite its claims to the contrary (more below).
I have been on this forum many times and tried multiple instances of uninstall/reinstall without success. The HP Installer may make it through the whole installation process but unstable performance of the printer is the outcome. Uninstalling the printer software using HP's uninstaller ALWAYS crashes before it can finish uninstalling. I get a message of "HP Installer Uninstaller has stopped working". I would attach a screenshot here but I does not seem an option in this window.
I have run multiple versions of HP's scrubber programs which also crash by level 2 with same message. I still ran L4 regardless but that crashes, too. That's the constant of every uninstallation or scrubbing effort using HP's programs: a crash without an error message given beyond the "HP Installer Uninstaller has stopped working".
I run the Printer/Scanner Doctor tool when the software was malfunctioning and it always finds a Print Spooler problem, "fixes" it but the problem remains. This posting is coming after the "Doctor" tool told me to uninstall the program. HP's uninstaller crashed, as usual, but the I was told to use Windows Add/Remove programs to finish the job. I did. I have not tried to install the program again and am becoming close to 'Refreshing' my entire Windows program, which will require reinstalling and updating Windows and every program I use - which will take days. I hope to avoid that step.
Dell's hardware analysis utility tells me everything hardware is great!
I truly believe HP's software IS THE PROBLEM and would love to figure this out. The printer has always worked great - until the Windows 8.1 update. The scanner will work fine (usually) after I reinstall the software. I used the printer before on my prior computer running Windows 7 with no trouble.
Going into today's crash info, via Event Viewer, I have this message from the error log:
Application 'C:\Program Files (x86)\HP\Digital Imaging\bin\hpqbam08.exe' (pid 3960) cannot be restarted - Application SID does not match Conductor SID..
And this error occurred just after:
Faulting application name: svchost.exe, version: 6.3.9600.16384, time stamp: 0x5215dfe3
Faulting module name: combase.dll, version: 6.3.9600.17031, time stamp: 0x53087867
Exception code: 0xc0000005
Fault offset: 0x0000000000005fc4
Faulting process id: 0x1284
Faulting application start time: 0x01cfe34585c8f1c4
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\combase.dll
Report Id: a118ba71-4ff5-11e4-bea6-34238711e0a0
Faulting package full name:
Faulting package-relative application ID:
There was an earlier - about 30 minutes earlier - warning saying:
The application (HP Solution Center, from vendor Hewlett-Packard) has the following problem: To function properly, HP Solution Center must be reinstalled after you upgrade Windows.
I have reinstalled it many times. I have used HP's installation & uninstallation utilities, including the Installation failure utility, none of which install the program properly, CERTAINLY not well enough that I can EVER uninstall it without a crashed uninstallation per description above...
I think I have reviewed and tried every "canned" HP quick solution, and not so quick solution, on this forum.
Comments?
Richard_L

Added Info for original posting:
Windows 8.1 64 bit OS. Dell box shipped with Windows 8 and upgraded to 8.1 via the Windows store. As stated in original post, computer is Dell XPS 8700, I7 cpu with 16 gbs of RAM.
Happy to answer any more specific questions.
Richard

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Officejet Pro L7590

Anyone who can help:
I've read everything I can get my hands on, here and other fora included.
-Uninstalled the 10.5 software that came with my officejet.
-Downloaded drivers from both Apple and HP that should have corrected the problem (this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481 says my hardware is supported for Snow Leopard)
-No scanning from Image Capture, Preview or from the printer window. It won't connect via any of these methods with which others are having success. The device is visible, but no scanner exists with which to scan anything.
Please, does anyone have any idea of what I can do to get functionality out of my Officejet Pro L7590?

Hi @rustyblue,
Welcome to the HP Forums!
Currently there are no full feature software and drivers directly through HP for Mac OS X 10.10 for this particular printer model. However, after some searching I found this driver directly through Apple. HP Printer Drivers v3.0 for OS X.
If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and a different printer, these steps will work for your printer on 10.10 as well.
Hope this helps you get up and running, please let me know if you have any further issues!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Hp officejet pro l7590 windows 7 32-bit install fails

I have downloaded the HP Officejet Pro Full Feature Software and Driver for windows 7 (32-bit) for my Officejet Pro L7590 connected by USB cable to my computer. I right-click on the downloaded software and select "Run as Administrator". The installation hangs at step 7 of 8 and then shows me that the L7590 printer driver failed to install. When I look in my "Printers And Devices" I see the HP L7590, but right-clicking on it only shows scanner functions (no printer options). And no option to remove printer.
I have tried uninstalling the HP Software and reinstalling the HP Officejet Pro Full Feature Software and Driver as well I have tried installing the HP Officejet Pro Basic Print and Scan Driver from HP, all with the same failed results.
The only way I am able to use the printer is to uninstall all HP software and simply plug the USB cable to my computer. Then a printer driver is loaded and I can print. The problem is that I do not get the "Solution Center" functionality which I need for scanning.
Any help is greatly appreciated!
Thanks,
Lou

Just so we get off on the right foot, I am going to have you run through the un-instillation and re-installation of the printer again, but in a thorough and managed way. I would like to ask for information's sake if the PC you are using is a HP computer or another manufacturer. This may be useful in future steps if they are necessary. We will want to remove the PnP drivers (the ones that automatically loaded) as well.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3643...
Install that and let me know the result!
Have a great day!

Is Officejet Pro L7590 2008 software compatible with Windows 8.1?

Similar Messages

Maybe you are looking for