Is possible to configure SLB per VRF??

Question

I have the Cat6500 with Sup720 and the IOS version 12.2(18)SXF8. From the documentation this software is SLB VRF-aware. But I can not configure SLB per VRF:-( I'm sending you the example of my configuration:
ip vrf WEB
rd 100:1
ip slb probe WEB1 tcp
port 443
ip slb serverfarm WEB
nat server
probe WEB1
real 212.67.72.228
inservice
real 212.67.72.244
inservice
ip slb vserver WEB-HTTPS
virtual 212.67.72.150 tcp 443
serverfarm WEB
sticky 300 netmask 255.255.255.255
advertise
inservice
interface vlan 30
ip vrf forwarding WEB
ip address 10.0.0.4 255.255.255.248
interface vlan 10
description Servery
ip vrf forwarding WEB
ip address 212.67.72.130 255.255.255.128
interface gi0/1
description Server WEB1
switchport
switchport access vlan 10
switchport mode access
no ip address
spanning-tree portfast
interface gi0/2
switchport
switchport access vlan 30
switchport mode access
no ip address
spanning-tree portfast
this configuration is functional without VRF, when I used the configuration with VRF - it is not functional:-(
Can you help me? Thank you.
Roman

Answer 1

if the main server is up, the CSS will use it over the sorry_server.
You can't tell the CSS not to use it if it is UP.
Therefore, the only solution is to find a way to keep your main server down once it fails a keepalive.
This can be done with a script that would issue the command 'suspend' once it detects the service missed a keepalive.
The script can be a tcp keepalive script and instead of returning just a failure one the server is down, the script itself can generate the 'suspend' command.
So, you then have time to sync your database and when ready you can do an 'active' under the service to start using it again.
Gilles.