Is postscript languge level depends on editor.

Hi,
I am using gedit editor in linux to print some text data to a printer. This text data is being converted to postscript level 2. The gedit version I am using is 2.26.3. Can a user control the postscript level genrated by changing the gedit editors settings? .
Thanks,
Sateesh.

Bill,
This is a bug in the formEditor.vm template. The editor item is not set up to be a dependent item, you can fix this by adding the #ITEM_PARTIAL_TRIGGERS() macro to the <af:panelLabelAndMessage> element:
<af:panelLabelAndMessage #ITEM_PROMPT_IN_FORM() #ITEM_RENDERED_IN_FORM()
#ITEM_PARTIAL_TRIGGERS()
Also, not that you might want to extend your expression to check for '', in addition to null, ADF Faces sometimes returns false when checkinf for an item being null,a and the checking for '' returns true.
Steven Davelaar,
JHeadstart Team.

Similar Messages

Three level dependent af:selectOnechoice

Hi All,
I am working with Jdev 11g (11.1.1.2.0)
I am trying to create three level dependent af:selectOnechoice, First level is working fine, Second level is not working ,unable to retrieve the values..
In Application module it is working fine, In Jspx page i am getting this issue.
I have given autosubmit property as "true" to selectOnechoice 1 and partial trigger for selectOnechoice 1 from selectOnechoice 2
similarly from 2nd level
autosubmit property as "true" to selectOnechoice 2 and partial trigger for selectOnechoice 2 from selectOnechoice 3
XML code for ur reference
<af:selectOneChoice value="#{bindings.MenuTypeTr.inputValue}" label="#{bindings.MenuTypeTr.label}"
required="#{bindings.MenuTypeTr.hints.mandatory}"
shortDesc="#{bindings.MenuTypeTr.hints.tooltip}" id="soc1"
binding="#{backingBeanScope.backing_untitled10.soc1}" autoSubmit="true">
<f:selectItems value="#{bindings.MenuTypeTr.items}" id="si1"
binding="#{backingBeanScope.backing_untitled10.si1}"/>
</af:selectOneChoice>
<af:selectOneChoice value="#{bindings.MainMenuTr.inputValue}" label="#{bindings.MainMenuTr.label}"
required="#{bindings.MainMenuTr.hints.mandatory}"
shortDesc="#{bindings.MainMenuTr.hints.tooltip}" id="soc2"
binding="#{backingBeanScope.backing_untitled10.soc2}" autoSubmit="true"
partialTriggers="soc1">
<f:selectItems value="#{bindings.MainMenuTr.items}" id="si2"
binding="#{backingBeanScope.backing_untitled10.si2}"/>
</af:selectOneChoice>
<af:selectOneChoice value="#{bindings.SubMenuTr.inputValue}" label="#{bindings.SubMenuTr.label}"
required="#{bindings.SubMenuTr.hints.mandatory}"
shortDesc="#{bindings.SubMenuTr.hints.tooltip}" id="soc3"
binding="#{backingBeanScope.backing_untitled10.soc3}" partialTriggers="soc2">
<f:selectItems value="#{bindings.SubMenuTr.items}" id="si3"
binding="#{backingBeanScope.backing_untitled10.si3}"/>
</af:selectOneChoice>
Plz guide me, If any thing i missed or did wrong
Thanks in Advance
Regards,
Zakir

Hi,
first of all make sure that dropdown queries are returning records. you can test it in bc4j tester ( right click on am and run).
Also can look @ http://groundside.com/blog/GrantRonald?title=jdeveloper_11_live_demo_cascading_list_o&more=1&c=1&tb=1&pb=1
or
http://ranajitsahoo.blogspot.com/2008/05/how-to-implement-dependent-drop-down.html
~Abhijit

Creation of new key figure at report level depending on the month range

Dear All,
I have a requirment where user wants to see the dollar values for the Amount key figure. Data is stored in the INR value in the cube.
Exchange rate values keep on changing depending upon the quarter. For all four quarters we have four different exchange rate.
Now system has to identify the applicable exchange rate and show a new column with the USD value just beside the INR values column.
How best we can achieve this.
Thanks & Rgds,
Anup

Hi
You can have currency translation at query level for achieving this.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f&overridelayout=true
Translation in Query
Regards
Ravi
Edited by: Ravi Naalla on Aug 17, 2009 11:56 AM

After capacity leveling dependent requirement s to be adjusted

hi
iam planning a fert product on 30 th agust for 100nos
created md61 -pir for 100 nos
done mrp run at mdo2 and got scheduled dates for 100nos which has gone beyond the requirement date as i was chhosed leed time scheduling and made dependent reqirement proposal for the order operation date.
here the important thing is the work center which i nedd to produce was fully engaged inthe period (schedule period which system proposed) .hence i made capacity leveling and planned order dates were changed again
which are actual producion dates
after capacity leveling my planned order was firmed
my problem here is the dependent requirement proposal date also
need to be changed with respect to firmed planed order.
how to achive this
i tried with opu5
but no changes in dependent reuirement proposal (planned order)
plz suggest
sasikanth
vst-it projects

hi
i tried it but unfortunatly it is creating a new planned order and giving exemption messge to the firmed planned oder as cancel the proposal
which is not at all acceptable
means for a single PIR
i made mrp run AND got planned order , after leveling the planned order was firmed
means my pir was satisfied with this
i made mrp run without changing PIR dates and quantity by expecting that it should propose a new dependent reqirement
but system created a new planed order to pir date which sholud not happen.
plz elobrate your view
sasikanth
vst-it projects

Reader 9.2 does not choose the right postscript level

Hi,
I use an old HP4500 Color Laser Jet (it still prints very well and I have a lot of toner :-)). every time I want to print a pdf on it, it does not work, for the adobe reader sets the postscript level to 3 although the printer has only 2.
I've found the information anywhere in the adobe pages, which say:
"Note: Acrobat sets the PostScript level automatically, based on the selected printer."
In my printer settings (Win7-64 bit, driver: HP Universal Printing PS Version 12.4.2009, 61.94.3.37) I have set the level to 2 (Dokumentoptions:Postscript Options:Postscript language level: 2)
But Adobe Reader is not interested in my settings and sets it to 3 every time and I have to change it manually every time. That is not funny, when printing many pdfs.... :-(((
I don't understand this, it has happend with another driver under windows xp the same way, but now I have lost my patience.
Why does the reader does not work properly or can I tell him to do so ?
Best regards
Thomas keller, Germany

Thanks Bernd! Works just fine now. Am I that obtuse that I wasn't able to
figure this out on my own?

PO Matching Level change to 2-WAY depending on the PO Price

Hi
we have a requirement to change the PO Matching level depending on the Total price of the PO. Suppose if the PO total price is less than 5000$ we need to set the PO matching level to 2-WAY and for all other PO's the matchig level should be 3-WAY. In the purchasing options and system options matching level is set to 3-WAY.
Please let me know how to do
Thanks

Hi,
POs get created in Core Purchasing through the autocreate process. So, whether it is a PO generated from a Requisition created in iProcurement, or a manually entered PO, you should be able to achieve a solution through personalization of the PO form using the appropriate triggering event. Like I said, you may have to research this option a little bit more in detail.

How do I place a particular image for ex. .png or .jpg in postscript file?

Hi all,
Can some one help me out by telling how to place a image with in postscript file, I see some binary code in .ps file which are stated in examples.
Is there any way to encode/decode the image in to this binary format and place it in .PS file.
Regards,
Ravi Nandan

Adobe has published a downloadable Technical Note #5095 (JPEG Source Vendor List) that includes an Appendix titled "Printing JPEG-Compressed Files", which includes sample code.
This would be a good place to start.
Then, depending on the PostScript Language Level of the interpreter you are using:
Another Technical Note #5603 (Filters and Reusable Streams) has a much more extensive explanation of the PostScript Language Level 3 filters, including GIF and PNG image filters.

Illegal dependency error while adding used DC

I am trying to develop a custom web dynpro in NWDI environment. I am trying to add used DC in the new project like these two. 1. pcui_gp/xssfpm and 2.pcui_gp/xssutils
I am getting the error message like the below.
illegal dependency: the compartment domain.com_SAPMSSCC_1 of DC domain.com/testbsp(domain.com_SAPMSSCC_1) must explicitly use compartment sap.com_SAPPCUI_GP_1 of DC
Can any one help me what could be the reason and how to resolve this?
Thanks,
Padman

Hi Akshatha,
Thanks for your reply.
Can you please write with more information? We have maintaining the dependency.
I am not getting these...
And then check the DC level dependency in the dcdef files.
Please note
1. The DC whis is being used should be exposed as public part
2. The using DC shoud explicitly mention its decpendency on the used DC in its dcdef file.
Can you write me step by step for this?
Thanks,
Padman

CO-PA Summarization Levels

Hi,
for a report with many characteristics I created 4 summarization levels in such a way that
Summarization Level 2 includes all characteristics of the Summarization Level 1 + some more
Summarization Level 3 includes all characteristics of the Summarization Level 2 + some more
Summarization Level 4 includes all characteristics of the Summarization Level 3 + some more
In the report options, in Presummarized data section, I selected "Read upon each navigation step".
Now when I execute the report, data is first read from the Summarization Level 1. During drill down data is read from further summarization levels depending on which characteristic is used for the drill down.
There is one thing that I don't understand:
None of these summarization levels is used by the system if it does not contain the characteristic "Product".
As Product is not used for the initial selection of the report I initially put it on Summarization Level 3. But the system did not want to use Summarization Levels 1 and 2 then. When I added the Product to the Levels 1 and 2, everything is working fine. However this is not what I need because Product is not displayed on the first screen of the report.
Do you know why the characteristic "Product" is required in each summarization level?
I will appreciate your help very much!
With best regards,
Marcin

Hi Surya,
My report is calling all summarization levels.
At the start the summariyation level 1 is called. It is most aggregated so it is little time needed to start the report. It contains only the most frequently used characteristics.
During drilldown other summarization levels can be called (this is achieved thru the option "Read upon each navigation step"). It depends on which characteristic is used for drilldown: if the characteristic used for drilldown is not included in the currently used summarization level, the next least aggregated summarization level which includes this characteristic is called.
The most frequently used characteristics are included in the most aggregated summarization level, the least frequently used characteristics are included in the least aggregated summarization level, which contains all characteristics used in the report.
With best regards,
Marcin

Levels of WBS elements

Hi All,
I am new to PS.
Please explain me how to define the levels of WBS elements with examples...
Thanks
Sneha

Hi,
Levels of WBS r controlled by Project coding mask.WBS levels can be created Upto max 99 levels depends on the need of the project Project structuring is done ( generally upto 4-5 levels solves the purpose )
http://help.sap.com/saphelp_46c/helpdata/en/04/926eae46f311d189470000e829fbbd/frameset.htm
Go thru above link of SAP help.
Rgds

Finding direct and indirect dependency

Hi,
I have table say SAPECC, which is used in one of the procedure as given below :
create or procedure test121
as
begin
insert into sapecc2
select * from sapecc;
end;
And SAPECC2 is used in another procedure as given below :
create or procedure test122
as
begin
insert into sapecc3
select * from sapecc2;
end;
Now if I want to get what are the direct and indirect dependency for SAPECC, how can we get that? Say I want to see TEST121 procedure and SAPECC2 table are the 1st level dependency for SAPECC and TEST122 procedure and SAPECC3 table are the 2st level dependency for SAPECC.
Regards,
Koushik

Hi Koushik,
There are no dependencies as you describe them between the sapeccX tables.
SQL> select level
          ,name
          ,type
          ,referenced_name
          ,referenced_type
      from user_dependencies
start with referenced_name like 'SAPECC%'
connect by prior referenced_name = name
LEVEL NAME         TYPE         REFERENCED_N REFERENCED_T
    1 TEST121      PROCEDURE    SAPECC       TABLE
    1 TEST121      PROCEDURE    SAPECC2      TABLE
    1 TEST122      PROCEDURE    SAPECC2      TABLE
    1 TEST122      PROCEDURE    SAPECC3      TABLE
4 rows selected.I don't know about 11g and PL/Scope maybe you can get something from there.
As a final resort you can play with user_source:
select *
from user_source
where name like 'TEST%';Regards
Peter

How text data is formated in post script language level 2

Hi all,
In post script language level 3 files text data is converted to hexadesimal format and kept in between xshow commands. But in postscript language level 2 files, text data is converted to some other format.
Can you please inform me, to which format text data is converted.
Thanks,
Sateesh.

PostScript: Level 2

Calculate based on different level-based measures

Hi,
Say that I have a Sales measure and a Region dimension as the following:
Region: Country -> State -> City -> Individual Stores
The Sales measure is aggregated by SUM along the dimension. I'd like to create another measure that when the user browses to each level, the measure calculates the ratio of the current Sales measure to its immediate parent level's aggregated Sales total.
For example, at the City level, the ratio will be City.Sales / State.Sales. At the individual store level, the ratio will be IndividualStores.Sales / City.Sales.
I know I can probably create one total Sales level-based measure at each level. But then that would give me multiple ratio measures as well, which I don't want. Is there any way to have only ONE ratio measure that reflects the ratio at each level depending what level the user is viewing?
Thanks.

JLin,
I think you were right when you were saying that you could create several metrics. I looked at your requirement again and realized that those are indeed separate metrics - since they use different columns for sales. So you can:
a) create aggregate tables and set LTS there (easiest I think)
b) adjust your ETL by creating a pre-calculated column based on your requirements
c) create a long CASE statement - but I'm still not sure how to define hierarchies....variables perhaps...maybe MMA could shed some light into it....
good luck

I want to update line level record in form

Hi
I have two blocks 1st Header block and 2nd Line level block.
When i update line level block then changed data should get updated in the respective table.
So my question is on which trigger/event i should wirte code to so that it will work.
Thanks in advance..
Thanks & Regards,
Manoj
Edited by: ManojT on May 6, 2009 11:40 PM

Hi,
Oracle Apps standard Save icon will fire trigger KEY-COMMIT at form level.
If current block has a KEY-COMMIT trigger at block level, forms will fire this one. In this case, an eventual KEY-COMMIT trigger at form level will be overridden/fire after/fire before then one at block level depending on property "execution hierarchy" of the block level KEY-COMMIT trigger. Same thing for an eventual KEY-COMMIT trigger at (current) item level.
Hope can help
Mariella

Capacity Leveling of Work Center

Hi all,
I have a problem with Capacity of Work center (WC).
I have a Internal Activity, and i assigned a WC for this Internal Activity. WC's capacity is 100H/day for 1 number of element.
Work of this WC is 250H, duration 5 days, number of element 1. Default capacity of this WC is distributed by Distribution Key define in Activity. . And they are divided equally between factory days in 5 day. That is capacity requirement is 50H/Day
So, i want to edit this WC's capacity following value:
Day 1: 100H/day
Day 2: 50H/day
day 3: 0H/day
day 4: 0H/day
day 5: 100H/day
How can i do it?? I try to use Dispatch Manually but i cant solve this problem.
Please help me for this case.
Thank all.
NLQ

Dear
Capacity leveling depends on some of the basic set up of Capacity Requirement Planning .You need to have proper CRP set up frist .
Couple of check points : -
Did you work centre is relevent for finitie scheduling in CR02-Capacity Header and wht is the over laod percentage for work centre ?
Did you have Capacity Requirement Related Set up like Over all profile , time profile , Startegy Profile -OPD0?
Did your Capacity Check -OPJK -Order Control at order level are active for availibilty Check 1 and 2 and assinged Over all Profile ?
Set up :
1.Please assing a operation control key like PP01 where Details Capacity Check and scheduling is active .
2.In CR02-Work centre -Capacity Header -You should have Follow check box marked
1.Releven for Finitie Scheduleing
2.Can be used for multiple Operation
3.
3.OPU3/OPU5 -Define Scheduling paramter -Mark Scheduling and Capcity Check for planned order or production Order
4.In SPRO -Shop Floor Control-Define Production Scheduling Profile -You need to matian the relevent Parameters like
1.Schedueling Automatically 2.Scheduling Log 3.Adjust Scheduling -Basic date , Depedent Requirement date 4.Scheduling Type -Backward etc .
These are all basic level set up beside CRP overall profile and other profile like strategy /time etc which may in place as you are analysing in CM01.
Please find below some of the useful CRP details : Refer this threads which are self explaintory :
http://help.sap.com/saphelp_47x200/helpdata/en/8a/a5a3154adc11d189740000e8322d00/frameset.htm
http://www.scribd.com/doc/17026521/SAP-ECC-60-PP-Capacity-Planning-httpsapdocsinfo
capacity planning
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PPCRPSFC/PPCRP_SFC.pdf
Capacity Planning
capacity requirements planning
How to dispatch operation to do Capacity Leveling at Work Centre Level :
1.Frist Check the over load at work centre . Goto -CM07/CM05-give plant only -then hit the Stnadard view -You will find weekly or daily baiss load ( Requirement , Avaliable Capcity , Overlaod etc )
2.Check the week in which days you are tring to dipatch -if you selet the week check box and double clik it will show u all the dataiul load .Basde on the available capacity in other week-days u need to dipatch in CM22/CM31 or CM25/CM21
While dipatching in CM22/CM31-Select the Stragegy button on the top header -Mark Date entry when dispatching so that when you select the operation of any production order or planned order for certain work centre , it will pop with window having information of Date , Work Centre , Time .Onec you did this you will receive Scheduling log with certain information .
Hope this helps
regards
JH

Is postscript languge level depends on editor.

Similar Messages

Maybe you are looking for