PO Matching Level change to 2-WAY depending on the PO Price

Hi
we have a requirement to change the PO Matching level depending on the Total price of the PO. Suppose if the PO total price is less than 5000$ we need to set the PO matching level to 2-WAY and for all other PO's the matchig level should be 3-WAY. In the purchasing options and system options matching level is set to 3-WAY.
Please let me know how to do
Thanks

Hi,
POs get created in Core Purchasing through the autocreate process. So, whether it is a PO generated from a Requisition created in iProcurement, or a manually entered PO, you should be able to achieve a solution through personalization of the PO form using the appropriate triggering event. Like I said, you may have to research this option a little bit more in detail.

Similar Messages

DI signals change half clock cycle depending on the number of acquired channels

Hi
I am observing strange behavior of the DI input.
This is the situation:
Two signals are connected to the line DI2 and DI3 of the NI PCIe6537 with LV9.0f2.
When acquiring only these two channels the DI3 is half a clock cycle late after DI02, but they should be at the same time.
The strange thing is that when I just simply acquire channels DI0:5 I got different picture:
Can anybody explain to me why adding additional channels changes the relative timing between two DI2&DI3?
There is no change in the processing, just simply adding few more lines to acquire.
thanks

Hi
It does not change anything when I use the single line or acquire the whole port and split in LV. The result is always the same.
I think I found something, check this out.
The waveform control contains the data. IF I display all of them everything is OK,
but if I delete the first two waveforms from the array the data is SHIFTED!!!
I enclosed the VI for the ones who want to have fun. Run it and change the numeric calue from 0 to 2 to remove two first waveforms.
Ugh.... and the morning is all gone.
cheers
Pawel
Attachments:
DigitWavefor_problem.vi ‏13 KB

Level change when adding audio keyframes

Hi all,
I've been in Avid Land for the last few months and just came back and noticed something that was getting on my nerves when I left (I don't recall seeing this before FCP 6). When I add keyframes to my audio levels with the pen tool, I get a keyframe, but at the same time, it lowers my level as if I had added a keyframe and then dragged it down. As far as I can tell it does this every time.
Does anyone know what this is about?
Thanks,
Matt

I was having this problem, so just before I composed this reply I did some tests. It could well be 'sloppy mouse work' but I don't think so. This time the audio level went up by 1 db but before it was dropping by 1 db when adding a keyframe. During the test, no matter how accurate I was the audio level changed when adding a keyframe. The track I was working on was enlarge somewhat and the problem didn't happen on standard sized tracks. I feel that this has to be some sort of bug.
I have always found FCP a little bit on the 'accurate' side. You have to be very precise when clicking on items otherwise you will miss. Some buttons are way too small and I think Apple could improve the FCP workflow by enlarging some buttons and allowing more space around clickable items.
A good example of this is the 3 way colour corrector. The left and right buttons for blacks/mids/whites are very hard to hit and I quite often hit the maximum by mistake.
I have worked on many non-linear systems and FCP is the only one where mouse accuracy is so important.
I am, to some extent used to this now and I suppose it is a minor inconvenience in comparison to the benefits of using FCP but, in the interests of improvement and ease of use it would be good if Apple could take this onboard.
Weenie.

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Template changes will not propogate out to the child web pages in the defined site.

I have a user in my organization who regularly makes changes to a dreamweawer template in order to universally change content on pages that are internal to her office. The site that serves her office has been defined in dreamweaver (we're running dreamweaver CS4). Normally, after saving the template changes on her way out of the dw session, she would be asked whether or not she wanted to propagate her template changes out to all of the child web pages (.htmls) in her site. This has stopped happening and sure enough she can see that the change doesn't exist on the child pages. Does anyone know why this might have happened, how to restore that prompt for propagation or, most importantly, how she can get those changes propagated to the child pages?

That may be an eventuality, particularly assuming I'm never able to work on this fulltime...which is likely. =) Anyway, thanks so much for the link. We'll try this again. Hopefully, you'll be able to read it. Even if it's clear, it may still just be clearly ugly, but please let me know what you think. Thanks!:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head>

<title></title>
<meta name="author" content="" />
<meta content="Geography Division, main page" name="Keywords" />
<meta content="Main Geography Division Home Page" name="Description" />
<link rel="Main Geography Division Home page" href="http://www.geo.census.gov/" />
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<link href="../asset/css/cwwintranet.css" rel="stylesheet" type="text/css" />
<link href="../asset/css/cwwintranet_print.css" rel="stylesheet" type="text/css" media="print" />
<link href="../asset/css/cww-geo.css" rel="stylesheet" type="text/css" />


</head>
<body>


<div id="zcwwImageHeader">
     <a href="#main" tabindex="0"><img id="SpacerImage" border="0" src="../asset/img/spacer.png" width="1" height="1" alt="Press enter to skip horizontal navigation bar." /></a>
     <img src="../asset/img/banner_img.png" width="390" height="50" alt="" id="zcwwImageRight" />
     <a href="http://cww.census.gov/" tabindex="1"><img src="../asset/img/inside_census.png" alt="Image with the text: inside census" width="360" height="39" border="0" id="zcwwImageLeft" /></a>
</div>
<div id="zcwwBlueNavHeader">
     <ul>
          <li><a tabindex="2" href="http://cww.census.gov/menu.asp?catcode=2">About Census</a></li>
          <li><a tabindex="3" href="http://cww.census.gov/menu.asp?catcode=3">Forms & Publications</a></li>
          <li><a tabindex="4" href="http://cww.census.gov/menu.asp?catcode=4">IT & System Support</a></li>
          <li><a tabindex="5" href="http://cww.census.gov/menu.asp?catcode=5">Management Resources</a></li>
          <li><a tabindex="6" href="http://cww.census.gov/menu.asp?catcode=6">Safety & Security</a></li>
          <li class="znoBorder"><a tabindex="7" href="http://cww.census.gov/menu.asp?catcode=7">Work Life & Career</a></li>
     </ul>
</div>
<div id="zcwwSearchHeader">
     <ul>
          <li><a tabindex="14" title="A to Z Index" href="http://cww.census.gov/AtoZIndex.asp">A to Z</a></li>
          <li><a href="http://cww.census.gov/faq/">FAQ</a> </li>
          <li class="znoBorder"><a tabindex="15" href="http://cww.census.gov/sitemap.asp">Site Map</a></li>
     </ul>
     <form class="zcwwSearchForm" action="http://cww.census.gov/search.asp">
          <input name="radiobutton" type="radio" class="zcwwSearchText" id="employeeRadio" tabindex="8" value="employee" />
          <label for="employeeRadio">Employee</label>
          <input name="radiobutton" id="searchRadio" type="radio" value="Intranet" class="zcwwSearchText" tabindex="9" checked="checked" />
          <label for="searchRadio">Intranet</label>
          <label for="searchText"><input tabindex="10" id="searchText" name="textfield" type="text" value="" size="15" class="zcwwSearchText" /></label>
          <input tabindex="11" name="Search" type="submit" id="Search" value="Search" class="zcwwGoButton" />
     </form>
     <form name="DivisionForm" action="http://cww.census.gov/cwwDivisionNav.asp" method="post" class="zcwwSearchForm">
          <span style="position:absolute;left:0px;top:-500px;width:1px;height:1px;overflow:hidden;" class="reader">For the following combo box, to make a selection, press enter then alt plus
     down arrow and use the up and down arrows.</span>
          <label for="zDivisionList"><select class="zcwwSearchText" tabindex="12" id="zDivisionList" name="zDivisionList" onchange="window.location='http://cww.census.gov/cwwDivisionNav.asp?zDivisionList=' + form.zDivisionList.options[form.zDivisionList.selectedIndex].value;">
               <option value="http://cww.census.gov/Directorate_Division.asp">Go to Directorate or Division</option>
               <option class="zcwwSelectA" value="http://cww.census.gov/Directorate_Division.asp">Directorates</option>
               <option class="zcwwSelectB" value="11">Assoc Dir for Administration & CFO (ADACFO)</option>
               <option class="zcwwSelectB" value="4">Assoc Dir for Communications (ADCOM)</option>
               <option class="zcwwSelectB" value="46">Assoc Dir for Decennial Census (ADDC)</option>
               <option class="zcwwSelectB" value="52">Assoc Dir for Demographic Programs (ADDP)</option>
               <option class="zcwwSelectB" value="36">Assoc Dir for Economic Program (ADEP)</option>
               <option class="zcwwSelectB" value="28">Assoc Dir for Field Operations (ADFO)</option>
               <option class="zcwwSelectB" value="21">Assoc Dir for Information Technology & CIO (ADIT)</option>
               <option class="zcwwSelectB" value="64">Assoc Dir for Strategic Planning & Innovation (ADSPI)</option>
               <option class="zcwwSelectB" value="1">Office Of The Director (DIR)</option>
               <option class="zcwwSelectA" value="http://cww.census.gov/Directorate_Division.asp">Divisions</option>                           <option class="zcwwSelectB" value="15">Acquisition (ACQ)</option>
               <option class="zcwwSelectB" value="16">Administrative & Customer Services (ACSD)</option>
               <option class="zcwwSelectB" value="14">Administrative & Management Systems (AMSD)</option>
               <option class="zcwwSelectB" value="50">American Community Survey Office (ACSO)</option>
               <option class="zcwwSelectB" value="17">Budget Division (BUD)</option>
               <option class="zcwwSelectB" value="40">Chief Economist (CES)</option>
               <option class="zcwwSelectB" value="41">Company Statistics (CSD)</option>
               <option class="zcwwSelectB" value="22">Computer Services (CSVD)</option>
               <option class="zcwwSelectB" value="6">Congressional Affairs Office (CAO)</option>
               <option class="zcwwSelectB" value="33">Customer Liaison Office (CLO)</option>
               <option class="zcwwSelectB" value="65">Data Integration Div (DID)</option>
               <option class="zcwwSelectB" value="47">Decennial Management (DMD)</option>
               <option class="zcwwSelectB" value="51">Decennial Statistical Studies (DSSD)</option>
               <option class="zcwwSelectB" value="48">Decennial System & Contracts Management Office (DSCMO)</option>
               <option class="zcwwSelectB" value="55">Demographic Statistical Methods (DSMD)</option>
               <option class="zcwwSelectB" value="53">Demographic Surveys (DSD)</option>
               <option class="zcwwSelectB" value="38">Economic Planning & Coordination (EPCD)</option>
               <option class="zcwwSelectB" value="39">Economic Statistical Methods & Programming (ESMPD)</option>
               <option class="zcwwSelectB" value="10">Equal Employment Opportunity Office (EEO)</option>
               <option class="zcwwSelectB" value="31">Field (FLD)</option>
               <option class="zcwwSelectB" value="18">Finance Division (FIN)</option>
               <option class="zcwwSelectB" value="43">Foreign Trade (FTD)</option>
               <option class="zcwwSelectB" value="49">Geography (GEO)</option>
               <option class="zcwwSelectB" value="44">Governments (GOVS)</option>
               <option class="zcwwSelectB" value="54">Housing & Household Economic Statistics (HHES)</option>
               <option class="zcwwSelectB" value="13">Human Resources (HRD)</option>
               <option class="zcwwSelectB" value="24">Information System Support & Review Office (ISSRO)</option>
               <option class="zcwwSelectB" value="27">Information Technology Security Office (ITSO)</option>
               <option class="zcwwSelectB" value="25">Lan Technology Support Office (LTSO)</option>
               <option class="zcwwSelectB" value="45">Manufacturing & Construction (MCD)</option>
               <option class="zcwwSelectB" value="34">Marketing Services Office (MSO)</option>
               <option class="zcwwSelectB" value="30">National Processing Center (NPC)</option>
               <option class="zcwwSelectB" value="9">Office of Analysis and Executive Support (OAES)</option>
               <option class="zcwwSelectB" value="56">Population (POP)</option>
               <option class="zcwwSelectB" value="7">Public Information Office (PIO)</option>
               <option class="zcwwSelectB" value="42">Service Sector Statistics (SSSD)</option>
               <option class="zcwwSelectB" value="59">Statistical Research (SRD)</option>
               <option class="zcwwSelectB" value="26">Systems Support (SSD)</option>
               <option class="zcwwSelectB" value="29">Technologies Management Office (TMO)</option>
               <option class="zcwwSelectB" value="23">Telecommunications Office (TCO)</option>
          </select>
          </label>
          <noscript>
          <input type="submit" tabindex="13" title="Go to Selected Directorate/Division/Office" class="zcwwGoButton" value="Go" />
          </noscript>
     </form>
<a name="main" id="main"></a>
</div>

<table cellpadding="0" cellspacing="0" id="zcwwLayoutTable">
     <tr valign="top">
          <td id="zcwwLeftMenu">
               
      <h5><a href="http://www.geo.census.gov/">Geography Division</a></h5>
      <ul>
        <li><a
        href="http://www.geo.census.gov/branches.html">Branches</a> </li>
        <li><a
        href="http://cww.census.gov/roster/default.aspx?OrgCode=GEO&option=div">Roster</a> </li>
        <li><a
        href="http://portal.geo.census.gov:7778/portal/page?_pageid=0,1416&_dad=portal30_db&_schema=PORTAL30">Portal</a> </li>
        <li><a
        href="http://www.geo.census.gov/mis/">MIS</a> </li>
        <li><a href="../asset/documents/geo_4th_floorplan.pdf">Division Floor Plan</a></li>
        <li><a href="http://cww.acsd.census.gov/building/floorLayout.asp">Census Building Floor Plan</a></li>
        <li><a href="../asset/mailingaddress.html">Mailing Address</a></li>
        </ul>
        @@("")@@
        <h5><a href="../UOB/index.html">UOB</a></h5>
        <ul>
          <li><a href="../UOB/roster.html">Roster</a> </li>
            <li>Organization</li>
            <li class="leftmenu_ind"><a href="../UOB/batch.html">Batch and Interactive Update Section</a></li>
          <li class="leftmenu_ind"><a href="../UOB/coordination.html">Coordination Section</a></li>
            <li class="leftmenu_ind"><a href="../UOB/production.html">Production Section</a></li>
            <li><a href="../asset/img/uob_floorplan.pdf">Branch Floor Plan</a></li>
            <li><a href="../UOB/org_chart.html">Organizatonal Chart</a></li>
        </ul>
        <h5>Operations, Procedures, and Controls</h5>
        <ul>
             <li><a href="../UOB/branch_web/bas.html">BAS</a></li>
          <li><a href="../uob/GATRES/userguide/index.htm">GATRES Documentation</a></li>
          <li><a href="../UOB/branch_web/Hwy_Rev.html">Highway Review</a></li>
          <li><a href="../UOB/luca.html">LUCA</a></li>
            <li><a href="../UOB/mafgor.html">MAFGOR</a></li>
            <li><a href="../UOB/msnerp.html">MSNERP</a></li>
            <li><a href="../UOB/pbo_msp_reconciliation.html">PBO MSP Reconciliation</a></li>
          <li><a href="../UOB/monthly.html">UOB Monthly Production Reports</a></li>
            <li><a href="http://www.geo.census.gov/wcb/production_control.html">Production Control Systems</a></li>
          <li><a href="../UOB/inactive.html">Inactive Projects Documents</a></li>
          <li><a href="../UOB/branch_web/FY2011_Projects.html">FY 2011 Projects</a></li>
        </ul>
        <h5>General Reference</h5>
        <ul>
             <li><a href="../UOB/cfcc.html">CFCC-MTFCC Crosswal</a>k</li>
            <li><a href="../UOB/GATRES_Ready_Report.html">GATRES Ready Reports</a></li>
            <li><a href="../UOB/feature.html">Feature Update Rules</a></li>
            <li><a href="../UOB/MSP_Reshape.html">MSP and Reshape Consistency</a></li>
          <li><a href="../UOB/GATRES/userguide/Primary_Alternate Name Designation.htm">Primary/Alternate Name</a></li>
          <li><a href="http://prodas2.geo.census.gov:7778/prs_prodtran/eprs_welcome.welcome">Problem Referral System</a></li>
            <li><a href="../UOB/release.html">Release Notes</a></li>
          <li><a href="../UOB/branch_web/statecountyprefixchart.html">State/County Prefix Standards</a></li>
            <li><a href="../UOB/Training.html">Training</a></li>
        </ul>
        
      <p> </p>      </td>
         <td id="zcwwContentArea"> <br />
          
          <div class="clear"><hr />
           <p>Contact: @@("")@@ <br />
          Last Revised: </p></div>
       </td></tr>
</table>


<div id="zcwwPageFooter">
<img src="../asset/img/wordmark_cwwblue.png" alt="U.S. Census Bureau - Helping You Make Informed Decisions" width="210" height="32" id="zcwwImageFooter" />
     <ul>
          <li><a href="http://cww.census.gov/">CWW</a></li>
          <li><a href="http://cww.census.gov/AccessiblilityStatement.asp">Accessibility</a></li>
          <li><a href="http://cww.census.gov/Contact.asp">Contact</a></li>
          <li><a href="http://cww.census.gov/roster/">Employee Lookup</a></li>
          <li><a href="http://cww.census.gov/Feedback.asp">Feedback</a></li>
          <li><a href="http://cww.census.gov/firewall.asp">Firewall</a></li>
          <li><a href="http://cww.census.gov/cwwpolicy.asp">Privacy Policy</a></li>
          <li class="noBorder"><a href="http://www.census.gov/">WWW</a></li>
     </ul>
</div>

</body>
</html>

Is there a way to update the itunes match to reflect changes that i have made on my computer

Every time i update itunes match it looses my alterations to my playlists and undoes any alterations to any albums i have made. Is there a way to update the itunes match to reflect changes that i have made on my computer?(Only copies new playlists and reverts old playlists to the way they were the first time I uploaded them) Any star ratings for albums are lost too if I put a star rating on them AFTER I first upload them to ITunes match.
Any help would be greatly appreciated and Merry Christmas you guys!
Mark O'Flaherty

HI
You don't need to select update iTunes match. It does not do what you expect!! You only need to make the changes and they will filter through to match naturally.
jim

[OrgChart] Change of position type depending on employees underneath

Hello,
I have a question regarding the OrgChart Add-In.
When importing from Excel all employees are created as Executives / Managers / Positions, depending where they stand in the hierarchy. Is there a way to assign the position "Staff" to employees, who don't have any employees underneath of them?
In Excel, I wrote a VBA-code to determine the number of people serving that special employee. Is this number is 0, I'd like to have this employee imported as a "Staff"
Anyone having a solution? When exporting a sample hierarchy, Visio creates the column "Master_Shape". But it doesn't recognize when reading back (importing that Excel file).
Thanks in advance

Hi,
Do you make some changes in the data file after creating the org chart? If so, you need to update the org chart manually.
To reflect changes in the structure of an organization, refresh the chart data or update the org chart manually. Click
Data > External Data > Refresh All.
If new data doesn’t exactly match the data the chart was built with, you might have to move individuals manually.
If you have a new chart, use Visio to compare it with your older chart and tell you what’s changed.
Open either the new      version or the older version of the organization chart.
Click Org Chart      >
Organization Data > Compare. In the
Compare      Organization Data box, find the version you want to compare to.
Under Compare type,      select the situation, depending on which version you’ve opened.
Under Report type,      choose the option that you want.
Click OK.
If you still can’t get the chart updated as you want it, you might have to rebuild the chart.
More information:
Update generated organization charts:
http://office.microsoft.com/en-001/visio-help/create-an-organization-chart-automatically-from-employee-data-HA102832203.aspx
Creating Org Charts by Importing Data:
http://www.smartdraw.com/articles/org-chart/create-org-chart-import-data.htm

Clear IDOC creation when only header level changes are made ME22N.

Hi All,
when the PO is on changed in the header level only(for example header texts and header code) and when we execute RSNAST00 one BADI getts triggered which checks if the Item category is 9 and badi will clear the IDOC creation.
If the PO item category is = 9, the IDOC must not be created. This badi works fine if the changes are made at
1)at Item level
2)both header level and Item level
In case of 1 and 2 we have both header segment E1EDK01 and item segments E1EDP01.As a result it checks for the item category in the item segment.so idoc is not created.
3)BADI is not working when the changes are made at the header level only. The IDOC is getting created even though the PO has the item category as 9.
I found in this case only header segments are availble while debugging and the item segments are not there to check the condition for the item category.
Please any one can suggest me possible solutions to clear idoc creation when only header level changes are made ME22N.
The BADI used is as below.
DATA : lwa_data TYPE edidd.
DATA : lw_dp01 TYPE e1edp01.
DATA : lwa_control TYPE edidc.
CHECK idoc_control-rcvprn = '3PL' AND idoc_control-idoctp = 'ORDERS05'.
LOOP AT idoc_data INTO lwa_data.
    IF lwa_data-segnam = 'E1EDP01'.
      lw_dp01 = lwa_data-sdata.
      IF lw_dp01-pstyp = '9'.
        CLEAR create_idoc.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHO
Thanks in advance.

Hi all,
Is there any way that I can get the item category details when Only header level changes are made to the PO in ME22N and only header segments are available in the IDOC.
Is this possible:- Fetch the po number and item category details from ekpo table that matches with the header segment po number and then check for item category value to clear the idoc creation?
Any information is helpfull.
Edited by: Selina.selk on Nov 20, 2009 1:39 PM
Edited by: Selina.selk on Nov 20, 2009 2:49 PM

Change Text Color Dynamically Depending on Which MP3 File is Playing

Change Text Color Dynamically Depending on Which MP3 File is
Playing
Hi,
Can anyone help with this problem.
I am trying to change a text cast member's color dynamically
based on which audio file is currently playing.
I have 4 Text Cast member buttons named
Play Song 1
Play Song 2
Play Song 3
Play Song 4
I am successfully playing the 4 songs in a queue like this
(ie. If "Play Song 1" sprite text member is pressed then...
sound(1).queue(member "Song1")
sound(1).queue(member "Song2")
sound(1).queue(member "Song3")
sound(1).queue(member "Song4")
sound(1).play
What I would like to do is to have the currently playing song
text color changed to a different value, say Green.
So if "Song2" in the queue starts to play then the text "Play
Song 2" would become Green. When done it would then turn back to
black then "Song3" starts to play and "Play Song 3" text script
button would then turn from black to Green an so on.
These are the codes I've tried in the frame script and none
seem to work...
on enterFrame me
if sound(1).status = 3 then member("Play Song 1").foreColor=5
(This works but only for the first song because "Play Song 1"
is directly named and clicked on.)
else member("Play Song 1").foreColor=255
end if
I have tried to make a reference to the playing song and so
far each of these doesn't work...
--if sound(1).status = 3 then
sprite(me.sound.member).foreColor=5
--if sound(1).status = 3 then
sprite(me.spriteNum).member.color=rgb(0,255,0)
--if sound(1).status = 3 then member
(sound(1).member).foreColor=5
--text = member(whichMember).scriptText
end
Is there any way to reference the song name text cast
member??
I thought I had it when I discovered sound(1).member but
sound(1).showProps returns the playing sound.member as
member: (member 28 of castLib 1) nothing there I can use?
It doesn't show the member name and
It doesn't show the song name "Song1" which I could then
match up to the "Play Song 1" text
I'm pretty new to lingo so specific code examples would be
appreciated.
Can anyone help??? Thanks!!!

did you get anywhere with this?
When applying a styleClass to a af:showDetailItem, it doesnt seem to have any effect whatsoever.

Creation of new key figure at report level depending on the month range

Dear All,
I have a requirment where user wants to see the dollar values for the Amount key figure. Data is stored in the INR value in the cube.
Exchange rate values keep on changing depending upon the quarter. For all four quarters we have four different exchange rate.
Now system has to identify the applicable exchange rate and show a new column with the USD value just beside the INR values column.
How best we can achieve this.
Thanks & Rgds,
Anup

Hi
You can have currency translation at query level for achieving this.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f&overridelayout=true
Translation in Query
Regards
Ravi
Edited by: Ravi Naalla on Aug 17, 2009 11:56 AM

Macbook Pro 15" volume level changes by itself

Hi all!
About a month ago I have upgraded my rock-solid Macbook Pro 15" (mid 2012) from Mountain Lion to Mavericks. All seemed fine (with the exception of some known annoyances with WIFI) until last week when all of a sudden the volume level started to change by itself. It started going up and down, turning mute and turning on again and so on, just like an invisible hand or a remote access have taken control of my machine (it wouldn't even let me change the the volume using the volume buttons while this weirdness is happening). This has never happened before. To make things worse, I have then upgraded to Yosemite and all seemed fine but then the weird volume changes appeared again and I now am stuck with no straight forward way of reverting all the way back to the original Lion (which worked perfectly since Mac purchase back in 2012).
Can anyone help?
I have googled for similar issues and have seen some answers (mostly not that relevant) including a thread on this forum suggesting to reset the SMC. I have tried that using the suggested key-combination press, but it did not seam to have solved the problem, as the volime changes continue when I least expect it.
Is this a hardware problem? If so, would a change of the keyboard resolve things? [ At some stage I thought maybe the problem was caused by the fact the I have fiddled a little bit with the keyboard by lifting the :; key (next to L and under P) and applying a bit of WD40 to clean a tiny spil of sugary liqid that caused the key to get sticky. But the volume keys are way far on top of keybord so my assumtion was/is that the volume changes would not be related to the cleaning. ]
is this a software problem? Some thread on similar (not identical) issues had suggested there are some bugs in soft and Apple is aware. For this reason I gave Yosemite a go but the problem continues. Would reverting to Lion sole the problem you think? [ Maybe I should ask here if anyone can suggest how to go about this downgrade as Option-Cmd-R key-combination press at start up does not give me the Interner Recovery scree anymore, but keeps taking me (just like Cmd-R) straight to the OSX Utilities where can wipe of the disk (which I did) and reinstall Yosemite only. ]
I would very much apreciate any replies that might help me solve this issue.
Many thanks
Ty

HI Ty ..
Might be something you have no tried yet here > Troubleshooting issues with no audio from built-in speakers on Macs

How can i change the width of a webapp depending on the view?

In Dashcode how can i change the width of the web app depending on the width of the view. I am using the stack layout.
For example if view 1 had a width of 400 px
the web app would have a width of 400 px
if i changed to a view with a 400 px
the webap would change to have a width of 400 px
it automatically adapts the the hight of a view how do i do the same with the width.

While they may auto adjust to what it thinks is a correct width, far too often it allocates way too much room and that causes lists with 4 columns to be much longer than they need to be and without the ability to adjust them, lists look strange.
http://twitpic.com/23ro09/full is an example of the first column having been allocated too much room.
Denzel

How to perform row level changes in a region of table type

Hi Gurus,
I am having a region of type table. In this table I have added a details section. In the details section I want to display an item only when its not null. So I have changed the code in controller to make the render as false for this field when it is null. But this is applied to the item present in all the rows in the table.
For example: If there are two rows in the table and first has some value in X item while second has null value for the same item. Then both the rows do not show the item X (render is set as false by controller).
Is there any way to have the item visible in first row and invisible in second row?
Thanks,
Manish

You have to go for SPEL binding. Create a transient attribute in the same VO of the table and set the value of the each row to true or false depending on the value of the attribute of the first, say using decode statement ( DECODE(firstattr, null, false, true)) and then bind this attribute to the RENDERED_ATTR attribute of the second item using SPEL binding. Please refer Dynamic User Interface section of the Chapter 4 of OA Framework Dev. Guide.
Regards,
Guru.

Acrobat or Reader: Is there a way to set the print scaling default at the application level?

Is there a way to set the Page/Print Scaling to a default at the application level? For Acrobat and Reader?
Thanks,

Often asked, but that feature retains the last used local setting.
You can however, change the default for Documents, individually, in their Properties > Advanced tab

9.2.0.4.0 OracleParameterCollection protection level changed so breaks code

We've just installed 9.2.0.4.0 to find it breaks our code. The OracleParameterCollection class has had its access level changed which means we cannot instantiate a new OracleParameterCollection.
Is this is a bug ? Or can we create an OracleParameterColection in some other way ??
Incidentally the documention still shows the class as public.

It looks like you're just using OracleParameterCollection as a concrete implementation of IDataParameterCollection.
If so, since ODP no longer has a public, creatable class implementing this interface,you will have to roll your own implementation of IDataParameterCollection.
Your other option is to switch from using an IDataParameterCollection to an array of IDataParameter, or a paramarray or some such.
Anyway, were's an example in VB of a simple class implementing IDataParameterCollection.
Public Class ParameterCollection
    Implements IDataParameterCollection
    Private params As ArrayList
    Public Sub New()
      params = New ArrayList
    End Sub
    Public Sub CopyTo(ByVal array As System.Array, ByVal index As Integer) Implements System.Collections.ICollection.CopyTo
      params.CopyTo(array, index)
    End Sub
    Public ReadOnly Property Count() As Integer Implements System.Collections.ICollection.Count
      Get
        Return params.Count
      End Get
    End Property
    Public ReadOnly Property IsSynchronized() As Boolean Implements System.Collections.ICollection.IsSynchronized
      Get
        Return params.IsSynchronized
      End Get
    End Property
    Public ReadOnly Property SyncRoot() As Object Implements System.Collections.ICollection.SyncRoot
      Get
        Return params.SyncRoot
      End Get
    End Property
    Public Function GetEnumerator() As System.Collections.IEnumerator Implements System.Collections.IEnumerable.GetEnumerator
      Return params.GetEnumerator
    End Function
    Public Function Add(ByVal value As Object) As Integer Implements System.Collections.IList.Add
      Dim p As IDataParameter = DirectCast(value, IDataParameter)
      params.Add(p)
    End Function
    Public Sub Clear() Implements System.Collections.IList.Clear
      params.Clear()
    End Sub
    Public Overloads Function Contains(ByVal value As Object) As Boolean Implements System.Collections.IList.Contains
      Return params.Contains(value)
    End Function
    Public Overloads Function IndexOf(ByVal value As Object) As Integer Implements System.Collections.IList.IndexOf
      Return params.IndexOf(value)
    End Function
    Public Sub Insert(ByVal index As Integer, ByVal value As Object) Implements System.Collections.IList.Insert
      params.Insert(index, value)
    End Sub
    Public ReadOnly Property IsFixedSize() As Boolean Implements System.Collections.IList.IsFixedSize
      Get
        Return params.IsFixedSize
      End Get
    End Property
    Public ReadOnly Property IsReadOnly() As Boolean Implements System.Collections.IList.IsReadOnly
      Get
        Return params.IsReadOnly
      End Get
    End Property
    Default Public Overloads Property Item(ByVal index As Integer) As Object Implements System.Collections.IList.Item
      Get
        Return params(index)
      End Get
      Set(ByVal Value As Object)
        params(index) = Value
      End Set
    End Property
    Public Sub Remove(ByVal value As Object) Implements System.Collections.IList.Remove
      params.Remove(value)
    End Sub
    Public Overloads Sub RemoveAt(ByVal index As Integer) Implements System.Collections.IList.RemoveAt
      params.RemoveAt(index)
    End Sub
    Public Overloads Function Contains(ByVal parameterName As String) As Boolean Implements System.Data.IDataParameterCollection.Contains
      Return (IndexOf(parameterName) <> -1)
    End Function
    Public Overloads Function IndexOf(ByVal parameterName As String) As Integer Implements System.Data.IDataParameterCollection.IndexOf
      For i As Integer = 0 To params.Count - 1
        If DirectCast(params(i), IDataParameter).ParameterName = parameterName Then
          Return i
        End If
      Next
      Return -1
    End Function
    Default Public Overloads Property Item(ByVal parameterName As String) As Object Implements System.Data.IDataParameterCollection.Item
      Get
        Dim i As Integer = IndexOf(parameterName)
        If i <> -1 Then
          Return Item(i)
        Else
          Return Nothing
        End If
      End Get
      Set(ByVal Value As Object)
        Dim i As Integer = IndexOf(parameterName)
        If i <> -1 Then
          Item(i) = Value
        Else
          Throw New Exception("Parameter not found.")
        End If
      End Set
    End Property
    Public Overloads Sub RemoveAt(ByVal parameterName As String) Implements System.Data.IDataParameterCollection.RemoveAt
      Dim i As Integer = IndexOf(parameterName)
      If i <> -1 Then
        params.RemoveAt(i)
      Else
        Throw New Exception("Parameter not found.")
      End If
    End Sub
End Class

PO Matching Level change to 2-WAY depending on the PO Price

Similar Messages

Maybe you are looking for