Is Roboform going to work with this latest "update"? Last update I lost use of RF and had to re-purchase in order to use! THIS IS UNACCEPTABLE!
I CANNOT lose Roboform....I consider it the MOST IMPORTANT "add-on" I use and will NOT update FF at the expense of losing RF! PLEASE!
There are occasional unexpected FF crashes - and "report" is usually filed when this happens...just wish it didn't happen when I'm in the middle of something - like in the middle of a long video - yes, FF does recover - but I have to go through the entire video, etc. just to get back to where I was when crash occurred.
Otherwise, FF is indispensable...IMO far more dependable than IE - and at least I FEEL like I'm not being monitored with everything I do online..as an online 'activist' of sorts (thoroughly non-threatening though I be! :>)) I have NEVER liked the idea of being 'stared' at - and with IE it always seem to crash when I am on a Conservative website - or doing something really threatening like studying the Constitution!
Swarnava, it is the other way as it is Roboform 7.6.2 and newer that compatible with Firefox 8.0 and is best to use with Firefox without causing Firefox 8.0 to crash.
Also if you are getting crashes due to using a older version 7.6.1 and older (and cannot or will not update to 7.62 or newer) then you could try Firefox 8.0.1 from www.mozilla.com instead.
Similar Messages
-
There ere some spellings errors: "With the latest update, my startpage (google mail) vanished and I do not see how I can reinstall my original startpage.
stumbleupon is compatible as the version you have may just be old.
https://addons.mozilla.org/en-US/firefox/addon/stumbleupon/
Norton has actually tried to get a update patch out for Firefox 5.0 back on Tuesday (versus taking some six weeks) when Firefox 5.0 was released. However I think some say the toolbar may not work if patch was installed before Firefox 5.0 and not after.
http://community.norton.com/t5/Norton-Internet-Security-Norton/Update-Available-Firefox-5-0-Compatibility-Release-for-Norton/td-p/478160
http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-for-Firefox-5/m-p/488664#M163730
Long thread if you want to discuss about any problems with toolbar.
As for Google toolbar well Google still has not cared to get a new release out yet when they were aware for weeks. -
With the latest update of iTunes the download quits and gives me and error code of 2324
With the latest update of iTunes the download quits and gives me and error code of 2324. what do I do now? As iTunes wont open up.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
recently updated to firefox 5.0 .. after doing so, Java is missing. I've tried to download Java and when doing so, still does not work. I use a Mac, I also use Safari.. (when in Safari) I have no issues.
I am no unable to access my work intranet. I've tried to uninstall and reinstall Firefox, NO LUCK. I've uninstalled Java and reinstalled.. NO LUCK (although it will work with Safari).recently updated to firefox 5.0 .. after doing so, Java is missing. I've tried to download Java and when doing so, still does not work. I use a Mac, I also use Safari.. (when in Safari) I have no issues.
I am no unable to access my work intranet. I've tried to uninstall and reinstall Firefox, NO LUCK. I've uninstalled Java and reinstalled.. NO LUCK (although it will work with Safari). -
I have to work with a lot of company web sites that are slow to adopt new browser features and expectations. The end result is that when Firefox updates my browser automatically, I frequently find myself broken, and in some cases, simply denied access, for having an "unsupported" browser or browser version. I would like to be able to open a previous version of Firefox, so that I can access that web site. But it appears that when you update, you remove/replace the previous version(s), and I am forced to use another browser.
I am currently using HP Simple Pass version 6.0, and it had been working like a dream until Firefox recently upgraded to v. 30. Now it doesn't work at all :( The current software won't have anymore updates (last one in 2013), because the omnipresent Apple bought Aunthentec (the company that makes (made) Simple Pass) back in 2012. Dear Firefox, please update whatever you have to to make the 2 compatible again, or I won't be able to use Firefox anymore. :(
-
Autoplay NO LONGER WORKS with the latest update
Just got an automatic iLife update yesterday, over the web.
Since then, the autoplay for quicktime movies in iWeb no longer works. Anyone else having this problem? Anyone have a solution?
Thanks.Did you do a restart after the update?
Also try the procedure under "Fix iWeb" here...
http://www.iwebformusicians.com/WebMusic/iWebTips.html
You can also use this method....
http://roddymckay.com/VisualMedia/QuickTimeiFrame.html
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host> -
Where can I download the latest (or last) version of Firefox 7? (I can't upgrade to Firefox 8 because Roboform no longer works with it)
Is there somewhere I can get the last version of Firefox 7?Install Latest version 7.6.3 and try, you need upgrade
* http://www.roboform.com/support/news -
IPhoto keeps saying The photo library needs to be upgraded to work with this version of iPhoto
Upgraded to new Lion iMac from Snow Leopard iMac, then upgraded to iCloud. I upgraded to the latest version of iPhoto. I get this message that says that "The photo library needs to be upgraded to work with this version of iPhoto. I have iPhoto '11 version 9.2.1(628)
I have attached the screenshot here. I have over 31,000 photos in this library. I click upgrade and it shows me a line for a while and then goes to the photos. Everything looks fine except photstream doesn't work and I always get this same message when I open iPhoto again.
Another detail is that I do have mobileme web albums still publishing from this iPhoto. Could this be causing a problem?Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
GoPod - Does it work with the latest Ipod firmware?
I have a 5th Gen 60gb iPod and have used goPod in the past to remove the volume cap. But ever since updating my iPod with the latest firmware the volume limit seems to be very quiet compared to what it used to be. Is this because goPod 1.4 doesn't work with the latest firmwire?
Has anyone else had this problem or is it just me going deaf?
CheersI disagree with that rudolfraith.
When I plug my iPod in, launch goPod and then press uncap, it does say that it is now uncapped, but the volume limit is no difference at all. I even tested this by hooking my Ipod up to my PC and recording it capped and uncapped, the levels were exactly the same.
So I feel that goPod v1.4 doesn't work with the latest firmware. -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
I did the latest update to my I pad 2 and lost Safari . I was instructed to switch the Java script on which I did but Safari is still not working properly . how do I get everything back after this software update.
Try a reset: hold down the home button along with the power button until you see the Apple, then let go.
-
Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?
Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
iPhoto cannot be opened because of a problem.
Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.
Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
Thanks tons...Thanks Terence,
I did get it working finally...and your last advice was what I needed.
I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers. -
Will a external Apple iSight work with the latest Mac Mini?
with a firewire 400-800 if it will what software do i need to take pictures and videos.
Many ThanksWill a external apple isight work with the latest mac mini.
Yes (if the external iSight works.)
External iSights are great webcams, but they are getting old (as consumer electronics go) and some have had pretty rough treatment. You can test yours using the suggestions from this page:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
I suggest you disconnect other Firewire devices until you get your external iSight working with your mini.
If you do not already have an external iSight and are considering buying one now,
a new webcam (with warranty) may be a better choice.
Many available alternatives are listed here: http://www.mac-compatible-web-cam.com/
THEMACMINIMAN wrote:
with a firewire 400-800 ...
Use one of the following ways to connect your FW400 external iSight to a FW800 Mac port:
• To use the FW400 6pin-6pin cable that comes with iSight, you can use a 6pin-9pin adapter
like one of these:
http://tinyurl.com/ydsbb6m  (I use this one.)
http://tinyurl.com/cgll7o
http://www.sonnettech.com/product/fw_adapter.html
• This Firewire 400-800 cable can work:
http://store.apple.com/us/product/TP320LL/A (I use this one.)
• Some report that this low-priced alternative cable works:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
I suggest you disconnect other Firewire devices until you get external iSight working with your mini. Once iSight works when it is the only FW connected device, you can try connecting other Firewire devices to determine whehter you can use any of them without conflict.
... if it will what software do i need to take pictures and videos.
With your 10.6.3 mini, you can use QuickTime X, iChat, Photo Booth, iMovie, and some of the other apps that are installed with OS X. Your Mac's Help for each of these apps can tell you how to use them with iSight (or other connected cameras.)
Some more apps you can use are shown in this list:
http://www.ralphjohns.co.uk/EZJim/EZJimpage7.html
The web links for each app gives details on what functions is offers with your webcam.
Many Thanks
You're welcome.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.
Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?
Maybe you are looking for
-
Please help me for icloud activation ???
Hello if the device is locked on any Cloud for more than four months is not a closure device or reporting that he stole should not consider your esteemed company this subject because I began to hate Apple this reason please help my devise and activat
-
((bool) -0.5) mishandled by Sun C 5.9 alpha, which causes configure failure
In <http://lists.gnu.org/archive/html/bug-autoconf/2006-05/msg00027.html> Bruno Haible reports that Sun C 5.9 alpha for Linux/x86 mishandles the following test case: #include <stdbool.h> char d[(bool) -0.5 == true ? 1 : -1]; This is strictly conformi
-
Had to install on a new computer, won't let me activate.
Recently the computer I do all my work on had a physical hard drive failure, and it is no longer functioning. In order to do my job I have to have Acrobat Standard on my workstation, but it will not allow me to use the activation/registration code wi
-
Hi there I created two zones, they are identical expect the network address. The zone1 I have sshd running. The 2nd zone, zone2 sshd is not running. I executed 1) svcadm -v enable svc:/network/ssh:default the result was svc:/network/ssh:default enabl
-
How do I get the Back Button drop down menu back?
When surfing in a tab there used to be a drop down menu next to the forward and back buttons. It was a little tiny triangle looking arrow. This was really useful and needed. It is gone in Firefox 4 as far as I can see. I am using the default 4.0 Them