Is there a change in FF8 for filenames in UTF-8 sended as attachment
I send files with non-ASCII-Characters in their filename to the browser.<br />
I use Content-Disposition: attachment; <nowiki>filename*="utf-8''myfilename"</nowiki>.<br />
This worked well for FF7 and below.<br />
In FF8 the filename is ignored (Linux and Windows).<br />
Is this a bug? Is there a better way to solve this?
The handling of the content-dispositon has changed in version 8 to be more compliant with the RFCs.
https://developer.mozilla.org/en/Firefox_8_for_developers#Network<br>
Similar Messages
-
There is no editor available for filename ... VB 2010
There is no editor available for '<filename>'.
Make sure the application for the file type (.vb) is installed.
I got this message after I updated a VB08 project to VB10. I tried to open a form when this message was shown. It happens to every form in the group (but not standard classes). Can anyone help?Hi guys
Please do not stop adding updated comments to old posts as these problems crop up time after time.
I experienced the same error 'There is no editor available for <filename>... ' but I knew it wasn't my VS Installation as I grabbed an older version of the code from the svn and that compiled and ran.
My errors were strange though, the solution has 39 projects and several projects were being skipped during a rebuild and there were the yellow ! in the main projects but when I tried to remove and add those references I got errors and they would not re-reference.
I tried all sorts of solutions and then I found this post.
Through reading through all of the posts I came to the conclusion there was a compatibility problem and when I started looking at the problem projects they were all at .Net V2.0 (that application has been around since 1.0). I
upped the framework version on one project and did a test rebuild, and it built so after upping all of the projects to V4.0 I can open the forms, the solution builds and the code runs and this post save me a huge huge problem and also what was potentially
going to be potentially an enormous amount of time to recover from another developers cock-up.
So please comment on old posts, it helped me massively.
Jayzee -
I have Microsoft Word for Apple, and when I send an attachment to an email, it goes as "application/octet-stream", and no one can open it. What can I do to send it as an ordinary word.doc>
You could Zip it.
Cheers, Tom -
N8, Looking for Apps, GPS which will send sms auto...
Hi there guys, I´m looking for a Apps, wich will send my location automatically every for example 10 minutes ?
I have to admitt I do not find it easy to find apps on Ovi Store
Solved!
Go to Solution.It isn't quite what you are looking for as it uploads location data to a website rather than sending sms but you could have a look at phonelocator periodic http://store.ovi.com/content/25892
Searching the store using "phone locator " doesn't, as far as I can see, come up with anything closer to what you want but you could have look using that as the search.
Not sure if an app sending so many sms messages would appeal to me, but I live in a country where operators interpret "unlimited " as xx messages per month.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5 -
Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support -
Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online
Right now there is no app store for Filemaker Go. Filemaker Forgot about us.
So I want to create a simple native iPhone App that all it does
is launch
fmp://~/filename.fmp12?$VariableName=value
This URL will launch the Filemaker Go App
Filemaker Go is a app that the user will have to have
downloaded already on the device..
The Simple Native app will launch the Filemaker Go.
The fmp URL has the information where the Filemaker Pro database is hosted
and get the user where they need to be..
Help Me please
iPhone 5s, iOS 8.1.3That would be software. And, you said "upload." That's "uploading software." Why do you question what you stated?
I don't know where you even want to upload this software. The only way it can be downloaded to a device is through the iTunes store. Do you even know what you want to do? -
Change Request Management "There is no task list for this project"
Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regardsHi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar -
hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.
nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone -
Hi,
My places.sqlite file size is 30,720 KB have I reached the maximum size, is there even a maximum size for this.
Suddenly the visited links are no longer changing font color, as I am preparing for an exam I need visited questions to change color, to keep track of questions that I have finished. But if I delete a few days of history then again,a few more visited links change color then again it stops, so it seems something is getting full and not able to accommodate any more? Why are my visited links no longer changing color after a certain number of visits? I do have a back up of the places.sqlite file. So I have tried everything from deleting the profile, uninstalling reinstalling, creating a new profile, then copy pasting places.sqlite etc, but as mentioned after a few visits, visited links no longer change color, if I delete a few days of history then again a few visits will again change color and then stop again, so what should I increase so that my visited links quota is increased, I have also tried tweaking about:config and it has had no result. Although I was not really confident that increasing brower.history_max _pages (don't remember exact name, but I am sure you get the idea) is going to help.
Seems as though my visited links change color, quota is full and only if I delete a few days of history will I get a few more visited links to change color. Can somebody shed some light? As mentioned my places.sqlite file size is 30,720 KB so I think perhaps this has something to do with this? Would really appreciate if someone could help. Thank you.There is no maximum for the places.sqlite database and other SQLite database files like I wrote above.<br />
All SQLite database file have fixed minimum sizes and if they run out of space they are automatically increased in size with a specific chunk size. For places.sqlite this is 10 MB for the minimum and for the chunk.
*Bug 581606 - Avoid sqlite fragmentation via SQLITE_FCNTL_CHUNK_SIZE -
Change to existing sales order - There is no incompletion data for sales document
we have just started TM in our sandbox system. When we change an existing order we get the following message:
There is no incompletion data for sales document and the order change does not get sent to tm. Creating a new order and changing all works fine. Is there something to be done with existing orders?Hello John,
Have you tried to use the report TMTRQINITIALSENDING?
Rgs, Marcelo Lauria -
Is there any way to change the settings for the built in isight camera?
I'm sure someone else has probably already asked this, but is there any way to change the settings for the built in isight camera? The resolution is horrible.
Welcome to Discussions, Prissymissysays
The last Apple-published resolution data I saw said that iSight's resolution is 640x480 VGA. I do not know of any way to change iSight's resolution, but that level is plenty of quality for my webcam needs.
The software you use to operate your iSight controls it, so specific answers will depend on what software you are using when you need more resolution. Check Help in that application to see if it can change iSight's resolution.
Some software, such as Apple's QuickTime 7 Pro allow you to change iSight's video quality and compression level with its QuickTime Player > Preferences > Recording > Quality: setting. You can add iGlasses software to manually override some iSight settings that are otherwise controlled automatically by the software using iSight. However, I do not think either of these options really changes iSight's resolution.
Check whether your iSight's lens cover has fingerprints or smudges on it. Then check iSight's image quality of your face in full sunlight about two feet from the lens. Best image quality requires more light than what most people would consider normal room lighting.
If you are still having problems, consider the applicable suggestions from How to Troubleshoot iSight.
If you need better resolution than iSight can deliver for some special imaging requirement such as close-up or high-accuracy images, you may need to consider using a different camera that better meets your special needs.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight -
I've just had my yahoo mail on my ipad hacked. It seems to have used all my contact on iPad to and from. Is there any virus software for iPad I can use. I've changed my password for my yahoo account last night already, but it seems emails are still going out. I've just been notified emails are still going out this morning
Your iPad doesn't have a virus.
Perhaps those mails were ones that were queued and just went out? Or maybe they rehacked your account?
mine was hacked a couple of weeks ago and they just mailed and ran.
You might want to change your password again.
it's also possible that your address is just being spoofed. -
I would be very appreciative if anyone could give me some advice!I have an IPad 2,I have previosly had no problem sending photos by email.But now for some reason photos I send are not successfully been sent. I'm not sure if I have changed a setting by mistake. Is there a particular Setting I should be concentrating on to making it successfully work again?Cheers!I look forward to hearing back from you!Aussie Fella!
is this how you send your photo?
Tap a photo, album, or event to select it.
Tap > Email.
Confirm or change the photos you want to share by tapping an option.
Select all the photos in an album or event: Tap All.
Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.
Type the address of the recipient, add a message, and tap Send. -
I bought the Star Walk app this weekend on my iPad. Today I went in iTunes to get it for my iPhone and it indicates I need to buy it again (same price). Is there a change in policy?
No, there isn't a change - compatible apps are shown in the Purchased tab in the App Store app on your iPhone. If you bought the HD version of the app then that only works on the iPad, if you want the version for the iPhone then that is a separate app and is therefore a separate purchase.
-
I CANNOT change my phone number setting to an sms capable number to set-up keychain.. I have tried everything. I am on a Mac OSX, Mavericks upgrade and an iPhone 5. My mobile is set to @icloud and my mac is stuck set on @me and there aren't any options for changing either my phone number, account, details or anything. I simply want to set-up keychain and receive an sms to my mobile and not to my sms non-compatible home phone number. Any help sooo appreciated.
On your Mac, Sign Out of iCloud, then Sign In with the ID you want to use.
Maybe you are looking for
-
How to Count schedule lines in IDoc ORDERS05 using XSLT Mapping
Hi Experts, In a Scenario where we are sending Purchase order (ORDERS05) to SAP SNC using XSLT Mapping, where in we need to count the no. of schedule lines against the Purchase Order line. As in Schedule line segment there is no such provision, so it
-
Can I transfer iTunes from a PC to a New Mac ?
Hi there, will someone tell me how i spend the whole itunes from a PC to a MAC ? APPS MUSIC FILMS RING TONES and PODCAST, apple allready asked and did not tell me anything... :-))) Home Sharing
-
Mac and Windows AD (part 1 of many)
Hello, Working on a project to connect 5 macs with OS X (10.4.3)workstation to a Windows Server and allow them to use Active Directory services, especially for user authentication. Can this be accomplished without Mac OS X Server or do I have to inco
-
How do I return my mail going from the MAC mail back to my AOL
How can I return my mail from the MAC mail to my AOL
-
Hi I'm looking for a portlet to list recently added or changed items in a page group. Does anyone know where I can find a portlet like that? I know there is a "Recent objects" in the 9IAS portal, but I found that it cannot be altered to do what I'm l