Is there a function to automatically number stickers 001-300?
I am working on a project that involves printing 300 county registration decals, which will each need to have a different number, from 001 to 300. Obviously it would be quite a pain to have to retype the number 300 times and save/print the decals as 300 different files. It is not just a number in the bottom right hand corner like a page number, rather a large number in the middle of the sticker.
Does anyone know of an auto-number function or plug-in that would allow me to do this in Illustrator without individually changing the number 300 times? Help! I need an answer soon or I will have to number them manually to complete this order.
Thanks!!
Heather
If you don't use InDesign, or if the numbers need to be more graphically embellished than is possible in InDesign, you might take a look at a couple of the AI Javascripts described here.
The SerialNumbers script populates a selected textFrame with a sequential list of paragraph-delimited numbers with or without a prefix:
The NumberedCallouts script creates additional sequentially-numbered individual textframes, styled like the original:
To semi-automate production of a set of highly-stylized sequentially-numbered text objects, the SerialNumbers script can be used in conjunction with the TextVariablesFTROU script described here to create Variables Palette DataSets that can then be batch printed or exported.
JET
Similar Messages
-
Is there any function to automatically adjust the voice volume in the multitrack
I'm trying to mix voice sounds and music files into one track. Sounds easy! But almost every music has its loud parts(for example the climax) and quiet parts. Therefore when i listen to the voice and the music at the same time, the voice files are sometimes relatively too quiet and sometimes to loud. I don want to adjust the volume pan one part after another because I have a lot of files to mix. Could you tell me is there any function I can use to automatically adjust the voice volume to make it always 'just a bit higher than the music'? Or can I read some documents about this problem?
Thank you very much!Sounds like you want to do what is called "ducking" & "side chaining".
First try using a compressor and or limiter on the voice tracks to get a more even volume.
Google: Audio Ducking tons of stuff on how to.
I myself have never tried this with Audition, or the compressors that come with it. I have done it in other multitrack software and older versions of Dave Browns Compressor.
Duff -
Is there a way to Automatically Number in Mail?
You can automatically number in Outlook. My client recently switched from a PC to an iMac, and wants to know how to easily number.
Thanks. KaraHello Kara.
Sorry but it has been a long week for me.
Automatically number what exactly?
Are you referring to a bulleted list with numbers instead of bullets?
If so, the Mail.app includes no such feature. -
Is there a way to automatically number each response?
Hi - I am creating a marketing request form for my sales team. Is there any way to have these responses automatically numbered? This way each request has a number associated to it?
Thank you,
LindaSorry this is not something we support. You can vote for the idea here : http://forums.adobe.com/ideas/2973
Gen -
in the program pages there is a function that automatically will save may document not only one i click save
In Lion and Mountain Lion you must save the first time then it will autosave for you with versions.
ForEverSave, a 3rd party application, might actually prompt you after a set period. Check it out and any alternatives.
Peter -
IS THERE A FUNCTION TO RETURN THE NUMBER OF MONTHS OR DAYS?
I know that you can do a months between function between 2 dates divided by 12 and get years but is there a function that can return the number of months between 2 dates or the number of days between 2 dates in a select statement for a report? These 2 dates are entered in an Oracle forms.
I have 2 dates.
BEG_SVC_DT 30-JUL-1995 DATE FORMAT
END_SVC_DT 981007 VARCHAR2 FORMAT Positions 5 and 6 are the days.
I must subtract BEG_SVC_DT from END_SVC_DT.
In PLSQL I add 31 to 07 and get 38. I subtract 30 from 38 and get 8.
or I have 2 dates
BEG_SVC_DT 10-JAN-2003 DATE FORMAT
END_SVC_DT 050924 VARCHAR2 FORMAT Positions 5 and 6 are the days.
I must subtract BEG_SVC_DT from END_SVC_DT.
In PLSQL I subtract 10 from 24 and get 14.
In both scenarios the end_dt field must be VARCHAR2 because the user has to enter the word 'PRESENT' . Is there a function in SQL that would compute the
number of days between 2 dates?
Is there a function to get the number of months between 2 dates?
I have 2 dates.
BEG_SVC_DT 12-JUL-2004 DATE FORMAT
END_SVC_DT 050807 VARCHAR2 FORMAT Positions 3 and 4 are months.
I must subtract BEG_SVC_DT from END_SVC_DT
JUL is the 7th month.
In PLSQL, I subtract 07 from 08 and get 01
Or I have 2 dates
BEG_SVC_DT 13-NOV-2004 DATE FORMAT
END_SVC_DT 050429 VARCHAR2 FORMAT Positions 3 and 4 are months.
I must subtract BEG_SVC_DT from END_SVC_DT.
NOV is the eleventh month. 04 is less than 11.
In PLSQL I have to add 12 to 04 and subtract 11 from 16 to get 05.
In both scenarios, the end_dt field must be VARCHAR2 because the user has to enter the word 'PRESENT'. In SQL, is there a function to compute the number of months between 2 dates?
I am doing my calculations this way because this is the way that the user has been doing them when they created the report manually.
The database that I am using is Oracle 9.2.0.6
Report Writer Report Builder 6.0.8.22.0
Forms 6.0.8.22.1In your example:
BEG_SVC_DT 30-JUL-1995 DATE FORMAT
END_SVC_DT 981007 VARCHAR2 FORMAT Positions 5 and 6 are the days.
I must subtract BEG_SVC_DT from END_SVC_DT.
In PLSQL I add 31 to 07 and get 38. I subtract 30 from 38 and get 8.
Where is the "31" depending on, on year and month of BEG_SVC_DT or END_SVC_DT?
What would be the answer for the following example
BEG_SVC_DT 25-FEB-1995 DATE FORMAT
END_SVC_DT 980407 VARCHAR2 FORMAT
Do I add 28 (=number of days in FEB-1995),
or 30 (=number of days in APR-1998),
or 31 (= max number of days in any month?) -
Is there any function module to give absolute value of a number?
Hi,
Is there any function module to give absolute value of a number?
That has similar functionality to the Built in Function ABS.
Please let me know.
Thanks,
cshi,
why are you looking for any function module.
You can easily get it by mathematical function ABS .
Syntax : <Turget Variable> = ABS <Source Variable>
\[removed by moderator\]
Anirban Bhattacharjee
Edited by: Jan Stallkamp on Jun 27, 2008 4:19 PM -
Automatic number generation using the function module
Hai Everyone,
I have the doubt in automatic number generation.
i find the function module. the function module is
report 123.
*DATA: RC LIKE INRI-RETURNCODE,
NUMBER(10) TYPE C.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING OBJECT = 'HUGO'
NR_RANGE_NR = '01'
IMPORTING RETURNCODE = RC
NUMBER = NUMBER.
CASE RC.
WHEN ' '.
everything o.k.
WHEN '1'.
the assigned number lies in the critical area.
WHEN '2'.
this was the last number, next time the first number
will be assigned
ENDCASE.
write:/ number.
in that function module what i want to give the Exporting Object 'HOGO'. where i want to define the number range. what is meant by 'HOGO'.
If any one faced the same problem plz help me.
Thanks and regards,
P.Naganjana ReddyHai Chandrasekhar,
in that what i have to give. Plz help me in this.
Subobject data element
To-year flag
Number length domain
No interval rolling
Number range transaction
Warning %
Main memory buffering
Group table
Subobject field in group table
Fld NoRangeElement
Fields int./ext. no.range no.
Fld. NoRangeNo
Display element text
Thasnks and regards,
P.Naganjana reddy -
Is there any Function Module to create SERIAL NUMBER
Hi All,
I need to create "SERIAL NUMBER" by passing "Material & Equipment Category ('S' -Always) ".
Plz Advise me , is there any Function Module to Create "Serial Number ".
Thanks in Advance.
Vyshu.hi,
check this function module
'NUMBER_GET_NEXT
Search with NUMBER_GET_NEXT keyword
Thanks & REgards -
Passing Partner function and Partner number in Action container editor
Hi all,
We have a requirement to create a follow up transaction with different business units as partner functions depending on some logic. I tried defining one action using copy_document method and was able to pass the container values of partner function (CRMT_PARTNER_FCT) and partner number (CRMT_PARTNER_NO) along with transaction type (process_type). However, still the follow up transaction does not contain the relevant partner function and value.
Please let me know is there a way I can default differnt partner function and partner number while creating a transaction based on my actions.
Thanks and Regards,
Varun GuptaThanks maggie, I know couple of options using code like the one you mentioned in copy badi. There is another BADI only for partner function. I can activate it in the access sequence and can do my code over there. However, in actions (copy_document specifically) we can pass parameter like transaction type, activity category etc. SAP standard implementation automatically takes those parameter into consideration and create subsequent transaction with right transaction type and activity category. On similar basis I have also tried sending partner function and partner number without any success. So I thought of raising this and need all CRM experts advice on it.
-
Is there a way to automatically insert the filename of a spreadsheet into the footer when using iworks numbers 3.2? iworks 09 had this feature and I can't find this feature in the new version of numbers.
Hi rhyolite,
In Numbers 3.x, The Print View and Layout View have gone (for now at least). Page Headers and Footers can only be reached under Menu > File > Print... to open Print Preview. Hover the cursor to reveal the Page Header and Footer fields.
The only inserts that I can get to work in Print Preview are Page Number, Page Count and Date & Time. Filename is no longer in the Insert menu.
Regards,
Ian. -
Is there a way to automate the CFX tags installation?
Hello,
I'm currently in the process of re-installing a web farm of ColdFusion 8 servers (W2K8, IIS 7.5).
I have to install a number of CFX tags (C++) on each server to get the code running.
Is there a way to automate the installation of the CFX tags (regedit imports, VBS, PowerShell...)?
I found some link indicating that keys should be imported in the registry at: HKLM\Software\Allaire, but Allaire does not even exist in this branch (I believe that the instructions were true of older versions of CF).
I installed one of the tags manually and noticed that the file neo-runtime.xml was updated with:
<?xml version="1.0"?>
<wddxPacket version="1.0">
<header/>
<data>
<array length="18">
<boolean value="true"/>
<struct type="coldfusion.server.ConfigMap">
<var name="session_variables">
<boolean value="false"/>
</var>
<var name="application_variables">
<boolean value="false"/>
</var>
<var name="server_variables">
<boolean value="false"/>
</var>
</struct>
<struct type="coldfusion.server.ConfigMap">
<var name="cfx_http5">
<struct type="coldfusion.server.ConfigMap">
<var name="NAME">
<string>cfx_http5</string>
</var>
<var name="CACHE">
<string>true</string>
</var>
<var name="PROCEDURE">
<string>ProcessTagRequest</string>
</var>
<var name="DESCRIPTION">
<string/>
</var>
<var name="TYPE">
<string>cpp</string>
</var>
<var name="LIBRARY">
<string>D:\ColdFusion8\cfx\cfx_http5\cfxhttp5.dll</string>
</var>
</struct>
</var>
</struct>
Can I simply add the XML node to get it running?
Thanks in advance for any lead to the solution.This is great! but I'm not there yet. I figured how to assign little midi triggered melodies to a touch track. I used to do stuff like this on an old Buchla years ago. How do I get the automation on the midi track to control the filter on an audio track? I created regions with the automation I want on a midi track, then I assigned those regions to keys with touch tracks. How do I get that to control the filter on the audio track?
thanks,
Lee -
Is there a way to automatically refresh a webpage in Firefox 3.6.10?
hi there,
I am hoping the Firefox team can help with a small problem, is there a way of automatically refreshing webpages within Firefox 3.6.10 and 4.06 beta? We are building an interesting website at the moment and the client is using Firefox 3.6.10to view the site. Each time they go onto the new website to see the changes we have done, they are shown old pages. We need to rectify this problem as quickly as possible, for our client without requesting that they refresh the page each time they go onto the site.You can do that by changing a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''browser.cache''' to bring up a small number of preferences
# Double-click on the preference '''browser.cache.check_doc_frequency''' and change its value to '''1'''
For more details on that preference see http://kb.mozillazine.org/Browser.cache.check_doc_frequency -
Is there a limit in the number of user accounts on Mavericks?
Hi
I would like to create a system with a lot of user accounts (+/- 200).
I have two questions:
- Is there a limit in the user accounts on Mavericks? Where can I find more infomation about this?
- Is there a possibility to automatically create a high number of accounts? Or at least some sort of template?
Huge thanks for any help.I don't think that there is a limit.
Are you using OS X Maverics Server?
https://help.apple.com/advancedserveradmin/mac/3.0/#apdDC3BA60F-246B-43E8-AB24-F 6419B32FF6D
In many organizations, a single shared directory domain is adequate. It can handle hundreds of thousands of users and thousands of computers sharing the same resources, such as printer queues, share points for home directories, share points for applications, and share points for documents. -
How do I automatically number rows in Numbers for iPad?
How do I automatically number rows in Numbers for iPad?
Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn
Maybe you are looking for
-
Camera on iphone 4s won't open
Had been working fine and now it won't open. Suggestions? Thanks!
-
How can I use the setup utility with my gaming adapter?
How can I use this program (the cd that came with my netgear wireless game adapter) to setup my gaming adapter? I want to configure my gaming adapter but it seems like i cannot do so? How can I achieve this?
-
Export/Import utility: unusual schema and table names
Hi, I am working on the correct TABLE, SCHEMA.TABLE and SCHEMA names validation. Unfortunately, I didn't find good examples in documentation and therefore turn to the forum. Example: I have "My User" schema and "My Table" table and SCOTT with "scott
-
How to download chinese language to nokia 113?
Any way to download Chinese language to Nokia 113? Solved! Go to Solution.
-
SuperDrive rejette tous les DVDs vierges
Bonjour, J'ai un nouveau MBP depuis quelques mois et j'ai besoin de graver quelques données sur DVD. J'ai donc tenté de graver hier pour la première fois avec le MBP mais ça ne fonctionne absolument pas. Tous les DVD insérés sont rejetés, différentes