Is there a lap timer feature?

If not I would gladly trade the dorky power song feature for one.

It keeps track of when you check the status and when you do the power song.
Unfortunately it doesn't seem like the nike site will let you hover over the power song bullet and see when it happened. The data is there in the XML, though, so it's probably just a bug that the hover doesn't work. If you set the power song to a two second blank track, or some short chime you could use it to track laps. You'd have to go digging into the xml by hand to find it until they fix that "bug".
Or if you don't use the feedback much you could use that as a lap button. shrug
Mac OS X (10.4.7)

Similar Messages

Lap time recording?

Is it possible to record lap times with the iPod touch (2nd Gen) and Nike+ sensor? I want to do some track work but I can't seem to find how to record laps?

Lap time recording finally a part of the stopwatch with software v3.0.
Maybe Apple will make a commercial out of this overlooked feature (like cut and paste).
Now maybe I'll get out there and start running those laps!

Sleep Timer Feature in iTunes via Remote iOS app

I'm not sure this is the venue for this, but I would like the "Remote" iOS app (currently version 3.0.1) to let me set a "sleep timer" when I play a radio station on my iMac iTunes 11. I think this means iTunes must first have a "sleep timer" feature built-in before the Remote app can use it. There have been third-party "sleep timer" add-ons for YEARS, and yet Apple has not deemed it necessary to add the feature into iTunes. Unfortunately, these third-party add-ons cannot be accessed via the Remote app.
Anyone here found a work-around?

ok so the remote app is grouping all my album artists together under one Artist name: "various artists"
need to find a way to stop this from happening

Producing musicals, I wish there was a "chunk" feature like in DP

Hi guys, especially iSchwartz, Jim, Rohan...
This is another day I wished there was a chunk feature like in DP.
Maybe you have a few tips for me.
I'm doing a recording of another musical: lots of songs, lots of dialogues, lots of special effects.
It would be so easy if I just could put the whole Arrangement together, including all songs, and if it would be possible to mix the songs in the "master arrangement" which includes all the dialogues and other fancy things.
They way I do it, is to mix each song seperately and import the bounced file to the master arrangement. And, as you know, they never fit together. The story acts in different locations and yeah, I choosed the wrong reverb again...the sound does not fit into the location where it takes place. So I have to remix and import the remixed file and hope that its ok now.
Its so long-winded.
I tried DP once but I didn't like the interface and I don't have the time to switch. Is there a trick maybe, that I should know?
I should mention, many of the songs are recorded to click.
I appreciate your feedback,
Eddie

Hello guys,
thanks for your feedback.
gliderproarc: toucktracks do not work for my purposes. They do playback samples, not arrangements.
Eriksimon: the arrangements contain audio and midi, but I bounced all the midi to audio files within the arrangements.
ashermusic: Do you know more about how that feature works in DP. Especially when using a UAD or powercore, will the plug-ins used in the "master arrangement" be occupied or are the dsps free for use within the "chunk"-arrangements?
I mean, when I have twenty arrangements and each contains six Powercore ore UAD plug-ins...how does DP handle the dsp resources.
LogicMaster: Unfortunately it seems to be very complicated to work with folders, if the songs contain different tempo, tempo changes and automation. You cannot easily move these folders around in the "master arrangement".
If you have any more thoughts about that, I appreciate your feedback,
thanks Eddie

Is there a "play all" feature for videos on iphone4????

Is there a "play all" feature for videos on iphone4????

Hi Robin
Welcome to apple discussions. I use Toast (personal choice only) in this situation since it has a play all check box. But then you don't get the fancy menus.
Click Here
There is no such check box within iDvd for selecting play all but you can set up iDvd's preferences to address scene selection menus when a movie/s is added. And here's how you do that:
A second option might involve adding the 8 separate movies to the slideshow feature within iDvd for continuous play. And yes you can add photos as well as movies to idvd's slideshow feature with a number of added benefits which I won't go into here. But if you want more info on this procedure just look at a few of Old Toad's prior posts / replies on this iDvd forum.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Stuck on a lap timer

This is an exercise I have to do and while I don't expect anyone to do the work for me, any suggestions or guidelines will be appreciated more than you know. I think I can handle most of the methods, and have some started and/or finished. I just need to get the startLap going so I can get the rest to work. Code would be great, but I would also appreciate any general guidance on how to make it work. The comments tell what we are to do and there are other classes that work with this. I am just a beginner programmer and am very lost. I am completely blanking on this method. The code thus far is as follows:
* The timer engine for a lap timer application. This engine can keep
* track of a 'run'. A run is a sequence of one or more consecutive laps.
* The timer records single lap times and the time for the total run,
* and it calculate averages and speed.
* @author (your name)
* @version (a version number or a date)
import java.lang.System;
public class TimingEngine
private boolean running;
private int lapCount;
private long totalTime;
private long lastTime;
private int avgSpeed;
private int lapLength;
private long lapStartTime;
* Create a TimingEngine object. The object will be initialised at 0,
* status is "Stopped", ready to start timing. The default lap length
* is 400m.
public TimingEngine()
running = false;
lapCount = 0;
lastTime = 0;
totalTime = 0;
lastTime = 0;
avgSpeed = 0;
lapLength = 400;
* Instruct the timer to start timing a lap.
* If we were not timing before, this starts the timer for a new
* run. If we were already timing, this starts a new lap, adding the
* current lap time to the total.
public void startLap()
if(running = false)
long startTime = getSystemTime();
startTime = startTime;
else
startTime = startTime;
lapCount++;
* Stop timing. Add the current lap time to the total, and set
* the timer into idle mode (waiting for a new run).
public void stop()
running = false;
lastTime = (getSystemTime() - lapStartTime);
lapStartTime = 0;
* Return the current status of the timer. The status is one of the
* two Strings "Timing..." or "Stopped", indicating whether this
* timer is currently running or stopped.
public String getStatus()
if(running = false)
return "Stopped";
else
return "Timing";
* Return the number of laps completed in this run.
public int getLapCount()
return lapCount;
* Return the time of the last lap completed.
* The result is a string in the format "m:ss:hh", where m is
* the number of minutes, ss the number of seconds, and hh the number
* of hundredths of a second. For example "7:02:43".
public String getLastTime()
String lastTimeString = Long.toString(lastTime);
return lastTimeString;
* Return the average time for a lap in this run.
* The result is a string in the format "m:ss:hh".
public String getAverageTime()
long averageTime;
if(lapCount!=0)
averageTime = totalTime/lapCount;
else
averageTime = totalTime;
String averageTimeString = Long.toString(averageTime);
return averageTimeString;
* Return the total time of the last or current run.
* The result is a string in the format "m:ss:hh".
public String getTotalTime()
String totalTimeString = Long.toString(totalTime);
return totalTimeString;
* Return the average speed in this run in meters per second.
* The result is a string such as "73 m/s".
public String getAverageSpeed()
return "unfinished";
* Return the length of a lap.
public int getLapLength()
return lapLength;
* Set the length of a lap.
public void setLapLength(int length)
lapLength = length;
* Private method called whenever a lap is finished. Thsi method
* updates the statistics.
private void finishLap()
* Convert a time interval in milli-seconds into a String in the
* format "m:ss:hh".
private String timeToString(long time)
return "unfinished";
* Convert a number into a two-digit String representation.
private String twoDigit(long number)
//remember there is an example of this in the book!!
return "unfinished";
* Return the current time of the system clock (in milli-seconds).
private long getSystemTime()
return System.currentTimeMillis();
}

This is the newest version of the code that I have been working on. As everyone can see, I really need help. I am on my fifth class of a programming class designed for those who have never programmed and am lost. I have some of it working properly, some not working properly, and some that I haven't attacked yet. The code I haven't started, I am not worried about. I am more concerned about the startLap code and the timeToString code; none of which is working the way it needs to. Any feedback is appreciated. I am using the code tags this time, so hopefully it will be formatted properly.
* The timer engine for a lap timer application. This engine can keep
* track of a 'run'. A run is a sequence of one or more consecutive laps.
* The timer records single lap times and the time for the total run,
* and it calculate averages and speed.
* @author (your name)
* @version (a version number or a date)
import java.lang.System;
public class TimingEngine
    private boolean running;
    private int lapCount;
    private long totalTime;
    private long lastTime;
    private int avgSpeed;
    private int lapLength;
    private long lapStartTime;
    private long lapEndTime;
     * Create a TimingEngine object. The object will be initialised at 0,
     * status is "Stopped", ready to start timing. The default lap length
     * is 400m.
    public TimingEngine()
        running = false;
        lapCount = 0;
        lastTime = 0;
        totalTime = 0;
        lastTime = 0;
        avgSpeed = 0;
        lapLength = 400;
        lapStartTime = getSystemTime();
     * Instruct the timer to start timing a lap.
     * If we were not timing before, this starts the timer for a new
     * run. If we were already timing, this starts a new lap, adding the
     * current lap time to the total.
    public void startLap()
       running=true;
       if(getSystemTime()>lapStartTime)
           lastTime=(getSystemTime() - lapStartTime);
       totalTime = (totalTime + lastTime);
       lapStartTime=getSystemTime();
       lapCount++;
     * Stop timing. Add the current lap time to the total, and set
     * the timer into idle mode (waiting for a new run).
    public void stop()
        running = false;
        lastTime = (getSystemTime() - lapStartTime);
        lapStartTime = 0;
     * Return the current status of the timer. The status is one of the
     * two Strings "Timing..." or "Stopped", indicating whether this
     * timer is currently running or stopped.
    public String getStatus()
       if(running = false)
       return "Stopped";
     else
        return "Timing";
     * Return the number of laps completed in this run.
    public int getLapCount()
       return lapCount;
     * Return the time of the last lap completed.
     * The result is a string in the format "m:ss:hh", where m is
     * the number of minutes, ss the number of seconds, and hh the number
     * of hundredths of a second. For example "7:02:43".
    public String getLastTime()
        String lastTimeString = Long.toString(lastTime);
        return lastTimeString;
     * Return the average time for a lap in this run.
     * The result is a string in the format "m:ss:hh".
    public String getAverageTime()
        long averageTime;
        if(lapCount!=0)
            averageTime = totalTime/lapCount;
        else
            averageTime = totalTime;
        String averageTimeString = Long.toString(averageTime);
        return averageTimeString;
     * Return the total time of the last or current run.
     * The result is a string in the format "m:ss:hh".
    public String getTotalTime()
       String totalTimeString = timeToString(totalTime);
       return totalTimeString;
     * Return the average speed in this run in meters per second.
     * The result is a string such as "73 m/s".
    public String getAverageSpeed()
        return "unfinished";
     * Return the length of a lap.
    public int getLapLength()
       return lapLength;
     * Set the length of a lap.
    public void setLapLength(int length)
      lapLength = length;
     * Private method called whenever a lap is finished. Thsi method
     * updates the statistics.
    private void finishLap()
     * Convert a time interval in milli-seconds into a String in the
     * format "m:ss:hh".
    private String timeToString(long time)
       int totalSeconds;
       int hours;
       int remainingMinutes;
       int minutes;
       int seconds;
       totalSeconds = (int)totalTime/1000;
       hours = totalSeconds/3600;
       remainingMinutes=totalSeconds%3600;
       minutes=remainingMinutes/60;
       seconds = remainingMinutes%60;
       String timeString = Long.toString(hours + minutes + seconds);
       return timeString;
     * Convert a number into a two-digit String representation.
    private String twoDigit(long number)
      //remember there is an example of this in the book!!
      return "unfinished";
     * Return the current time of the system clock (in milli-seconds).
    private long getSystemTime()
       return System.currentTimeMillis();
}

Sleep timer feature

A sleep timer feature would be great. I enjoy listening to music while I'm falling asleep but I dont like it playing all night draining my battery or having to turn it off myself before i sleep.

Hi ljjkmt, Great idea! However, there's already a suggestion for this feature here: Sleep Timer. This idea already has over 1,200 kudos, so it'd be great if you could go vote for it and add your comments there. :) Thanks,Kitty

I do not have the face time feature in my i phone4

I do not have the face time feature in my iphone4!!
I can not download it, is it an application or does it come with the operating software?
I have updated my software to 4.3.3 and still i do not have it.

first off where are you located? many middle east countries have facetime blocked, nothing to do with your equipment. there is no icon for facetime on the iphone, it is just a button on each individual contact that you can facetime with. you have to add facetime contact info for each person. you can only facetime using wifi with another person that has facetime and is on wifi as well.

In ICal is there a way to see all of the text in all day events on the month view of the calendar. Seems to wrap text only if there is a time on the event

In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event

The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

How to read in a text file of race lap times....

How do i read in a text file containing lap times from a race for one driver?
I have the times down 1 column and look like this.
I then want to add the times up to get a total race time. I have been looking at the Calendar class and the simpleDateFunction but not sure how to go about it.
1'43.857
1'37.860
1'38.147
1'37.922
1'37.662
1'37.639
1'37.621
1'37.728
1'37.508
1'37.990
1'38.114
1'38.177
1'38.162
1'37.847
1'38.013
1'38.196
1'37.963
1'37.924
1'38.038
1'37.962
Thanks
Trev

Considering that your times have non-numerical chars you have no choice but to read them as Strings. Once you have done that you will need to parse the times yourself, ie spilt it into the three separate bits of data. Then you can use the Calendar class if you wish or you can keep a running tally yourself. Just don't forget to tick over seconds when milliseconds reaches 999 and tick over minutes when seconds reach 59.

Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer

Hello.....
I'm not able to log into Windows Server 2008 r2 server thorugh Remote Desktop connection, receiving below error message.
This issue is with only three servers in the environment
"Remote Desktop cannot verify the identity of the computer because there is a time or date diffrence between your computer and remote computer......"
The date/time is correct on the server when i checked in the console session of the server
Can see below messages in event logs
Event ID 1014:
"Name resolution for the name XYZdomain.com timed out after none of the configured DNS servers responded."
Event ID 1053:
The processing of Group Policy failed. Windows could not resolve the user name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Any thoughts ....

Hi,
Have you tried to connect these three servers with IP address instead of computer name or DNS name?
Check Remote Desktop Connection settings: Option-->Advanced-->Connect from anywhere-->Settings-->Connection Settings-->Select “Do not user an RD Gateway server”
For more information please refer to following MS articles:
Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/c1f64836-5606-49b0-82eb-56be7f696520
Cannot connect via Remote Desktop
http://social.technet.microsoft.com/Forums/en-US/windowsserver2008r2general/thread/5087e897-8313-468c-ad37-ef18b87d4dd6
Lawrence
TechNet Community Support

Trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

trying to add album from iphoto into idvd slideshow. Not all photos are loading. Message "creating thumbnail images...(31 remaining). Been there a long time. What is wrong?

Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them. Report back with the results.
OT

I have just received two white I Phones 4 Model MC611LL and they bring along the Face Time feature. I own an older I Phone 4 model MC610 LL and it doesn´t have the Face Time feature. How should I get it?.

I have just received two white I Phones 4 Model MC611LL and they have the Face Time Feature included. I own an older version of I Phone 4 Model MC610LL and it doesn´t have the Face Time feature included. How can I get it?.

Where did you get the old one? If it came from the Middle East, FaceTime was removed from those due to government regulations. It can NOT be added back to them.

It appears that iPad does not retain information from prior years - appointments, etc. Valuable info is lost unless there is an archive feature that I cannot find.

It appears that the iPad, and also the iPhone do not retain information for prior years, such as appointments, etc. Unless there is an archive feature, which I have not found, valuable information is lost. Any help would be appreciated.

Thank you so much to JimHdk. A really simple solution, but I guess I am not totally familiar with my iPad. I have a high learning curve with my iPhone also.

Is there a lap timer feature?

Similar Messages

Maybe you are looking for