Is there a list of 'Event Log' enteries that I sho...

Hi,
I was looking through a few of the posts on here and noticed posts about event logs on the BT HomeHub.
I was wondering if there is a list of specific 'Event Log' enteries that I should be aware of that could be malicious activity?
If there is specific enteries that could be malicious activity is there a way of using Microsoft 'Event Viewer' of 'System Monitor' to send me a message when this malicious activity is taking place?
Also I noticed on my laptop that when I was looking in WiFi Status that there was a massive difference in the bytes sent and recieved. I think it was something like 600,000 sent and 6000,000 recieved. I looked in the BT HomeHub Event Log and there was a load of enteries for the following:
11:41:42,12 Feb. PortMapping Delete By UPNP/TR064 Success.
11:41:02,12 Feb. PortMapping Add By UPNP/TR064 Success.
The only thing I've done recently is install WAMP for a local test server to view website being designed in PHP. I wanted to view the websites on my other devices so I allowed WAMP through my microsoft firewall. I have dissalowed WAMP through the firewall now and the PortMapping messsages in BT HomeHub Event Log have seemed to have stopped.

Disable uPnP, restart the hub, and the entries should stop. Then see if any programs you have installed, stop working properly.
If everything works as normal, then leave uPnP disabled.
Quote
"Is there anyway of setting up Microsoft ‘Event Viewer’ or ‘System Monitor’ to flag up this malicious activity and send me a message to make me aware of these?"
No, but I would not worry about them, as the home hub firewall is there to preven intrusions.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Is there a list somewhere of Nokia phones that the...

Why I am asking this question is my Nokia 6600 fold went faulty (see note below about this) and has been replaced by O2 with a Nokia 6700 slide. Now I don't like slide phones so I bought a 7020 fold on eBay.
What I am looking for is an adapter for these phones (each have 2.5 mm AV connector) that will allow me to connect my noise cancelling headphone's 3.5 mm jack to (I was able to do this on the adapter that came with my 6600 fold phone).
I googled and found that one option may be the Nokia AD-44 but I am not sure it will work with either the Nokia 6700 slide or 7020 fold.
So my question, is there a list somewhere of Nokia phones that the AD-44 adapter will work with?
Note: the faulty Nokia 6600 fold phone was a replacement for the original Nokia 6600 fold phone and both have had the well documented 'm, n, o' problem when sending a message that locked the phone and all that could be done was to power off!

Hi there,
I managed to find an old list of compatibility with HS-44 / AD-44 but nothing for the adaptor on it's own.
Nokia 3600 Slide
Nokia 3710 Fold
Nokia 3720 Classic
Nokia 5610 XpressMusic
Nokia 5700 XpressMusic
Nokia 6110 Navigator
Nokia 6120 Classic
Nokia 6210 Navigator
Nokia 6212
Nokia 6220 Classic
Nokia 6290
Nokia 6700 Slide
Nokia 6730 Classic
Nokia 7610 Supernova
Nokia E66
Nokia E71
Nokia E90
I can't promise this is ALL th ehandsets though, since the list is quite old. Also I am almost certain that this adaptor converts Nokia 2.5mm to Nokia 3.5mm, Nokia connectors are different to a standard headphone as there is an additional connection for voice.
If using non -Nokia headphones you may need a further adaptor.
Hope this helps a little?

Is there a list of web-safe fonts that Captivate 8 will accept or an option to include other web-safe fonts?

The problem I've encountered is that text generated by a variable will only display as a web safe font and not always the same one across machines. Also different developers are seeing different font options. For instance on my machine, Helvetica LT 75 Bold is listed, but no other Helvetica options. Another developer has Helvetica LT 77 Bold Condensed instead.
My questions are:
Is there a list of web-safe fonts that CP8 will use?
Can this list be expanded somehow?
Thank you,
Kelly

Web safe fonts really doesn't have the same meaning as something like web safe colors. While you will generally be OK with selecting a web safe font, it's only web safe in the concept of a font then defaulting to a font on the end users computer that they actually have installed. The default types are serif, sans-serif, and monotype, but then you have more distinct variations which you can see here, CSS Web Safe Fonts.
You'll need to keep in mind that not every person has Arial or Times New Roman installed. Because of this you may have someone that has Helvetica or Times. Both fall under their same respective font families, but will look a little different depending on what the user has installed.

Is there a list of event listener types? Applescript

Does anyone know where to look for such a thing? I've found various references to individual ones in the Adobe scripting manuals, but never a complete list.

Check out Events chapter in InDesign CSX Scripting Guide.

Is there a list of Event IDs for SQL 2008 auditing events?

As a SQL Server newbie, I am having trouble finding Event IDs for SQL that can be monitored in Change Auditor.

Did you click the event class on the description column
EventClass
int
Type of event = 107.
--Prashanth

Is there a list of other cell phones that work with iTunes?

I'm thinking of going with Verizon and was just wondering if certain of their phones will work. Thanks.

The only phones that work directly with iTunes, other than the iPhone, are a few of Motorola's phones such as certain models of the RAZR, ROKR, and SLVR. You'll want to check with Motorola or ask Verizon which models are iTunes-equipped.
Other phones may be able to use iTunes tracks even though they may not be able to sync directly from iTunes. Any phone that can mount on a Mac as a normal hard drive and accept tracks dragged to the phone should work, assuming that the tracks are in a supported format (MP3 almost always is supported, AAC a bit less common. Copy-protected tracks from the iTunes Store require an iTunes-equipped phone). There may be phones that are compatible with Mac and have their own software, but I'm can't mention any specific models.
Hope this helps.

Are there any memory and cpu logging extensions that is addon, not process oriented, that will detect ram/cpu usage, even within the main Firefox process?

And why wasn't this a feature in FF already? I hear it was, but it was dropped in FF4 as part of some kind of feature freeze? Why was this most important of all features removed, and how can I patch this? So I can use my browser properly again. Maybe an addon that would make about-addonsmemory detect that kind of stuff would do, maybe something that forces all addons to operate within the plugin container. Or maybe just something that will moniter everything right.

The CPU usage part is the most important

Vista got corrupt after power failure. sfc reports error and Event log service is unable to start itself.

Hi,
After a sudden power failure, I guess vista file system is corrupt.   I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here....   Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info                  CBS    Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info                  CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info                  CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info                  CBS    NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info                  CBS    NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info                  CSI    00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info                  CBS    NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info                  CSI    00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info                  CSI    00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info                  CSI    00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info                  CSI    00000008 Repair results created:
POQ 0 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
    3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
    4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
    5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
    6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info                  CSI    121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info                  CSI    00000009 [SR] Verify complete
2014-07-07 14:56:11, Info                  CSI    0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info                  CSI    0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info                  CSI    0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info                  CSI    000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info                  CSI    000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info                  CSI    000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info                  CSI    000000b4 Repair results created:
POQ 43 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
    3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
    4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
    5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
    6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info                  CSI    000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info                  CSI    000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info                  CSI    000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info                  CSI    000000b8 Repair results created:
POQ 44 starts:
     0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
    1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
    2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
    3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
    4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
    5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
    6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
    7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info                  CSI    -ms"
    8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
    9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
    10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
    11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info                  CSI    00000213 [SR] Repair complete
2014-07-07 15:08:01, Info                  CSI    00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info                  CSI    00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info                  CSI    00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info                  CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info                  CSI    00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info                  CBS    Scavenge: Package store indicates there is no component to scavenge, skipping.

Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Big Events.log in $COMMON_TOP/admin/log

Hello,
I have noticed there are always many logs in the $COMMON_TOP/admin/log. Apart from the concurrent managers logs etc, there are those Events.logs which can grow to any size as long as the apps keeps running.
New ones are however created upon restart of apps and I can clear the old ones.
I will like to reduce what is written to the Events.log so that they do not grow too big. Can someone let me how to do this or point me to an article on these logs?
Regards

I have found the solution I wanted and I think it may be useful to someone later and that is why I am posting this.
Those LARGE eventxx.logs under $COMMON_TOP/admin/log are Fulfillment Server logs and looking through them, I don't really know their benefits and I have been deleting them but I can swtich off the loggings now.
This is detailed in the metalink note ID 601375.1
I got this when I came across this link on the internet:
http://newappsdba.blogspot.com/2008/12/huge-eventslog-files-in-applcsfappllog.html
Regards
Edited by: user12191278 on 18-Jan-2010 05:24

Allow Non-Administrator accounts to create event sources and write to event logs

We are setting up BizTalk 2013 in Windows Server 2012 and one of the requirements is to allow the service account to create sources and write in event logs (Application) of the BizTalk servers. We have found what it seems to be a simple solution for this
without giving service accounts local admin rights.
Give Full control for the following registry keys to the service accounts or groups to allow creating of event sources and write to event logs:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
Note: when changing permissions for EventLog key, the child keys will inherit the permissions by default except Security key which must be done manually.
Initial tests using a .net test app seems to work as expected. New event sources are being created in the event logs and writing to the event logs after that works perfectly.
The above method has been deployed in production and this is the most suitable solution for us.

Hi Keong6806,
Thanks a lot for posting and sharing here.
Do you have any other questions regarding this topic? If not I would change the type as 'Discussion' then.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Event ID 7000 and 7009 every minute in event log then system crashes

I am getting this error any a lot of machines. What happens is it will get tons of EVENT ID 7009 and 7000. This will continue until the system crashes completely. Below are some of the event log errors that happen. The 7009 and 7000 happen every minute.
EVEN ID 10005 DCOM got error "1053" attempting to start the service VSS with arguments "" in order to run the server:
{E579AB5F-1CC4-44B4-BED9-DE0991FF0623}
EVENT ID 10010 The server {1F87137D-0E7C-44D5-8C73-4EFFB68962F2} did not register with DCOM within the required timeout.
See attached picture
Knowledge is Power.

Hi,
Have you checked with the suggestions mentioned in the below links regarding the errors here?
Event ID 7000 — Service Start Operations
Event ID 7009 — Basic Service Operations
Event ID 10005 — COM General Functionality
Event ID 10010 — COM General Functionality
Best regards
Michael Shao
TechNet Community Support

Is there a way to adjust ios7 to show just list of events, not hours?

Is there a way to adjust the new IOS7 calendar DAY VIEW so you just see the list of events for the day; so you don't have to scroll down all the hours of day? (want it back the old way!) Can it be adjusted?
Its really annoying the current way; when you glance at your phone you don't see all the appointments for the day, have to scroll up and down, and I end up missing things and its time consuming. Same annoying thing in WEEKLY VIEW. Is there a way to change that in preferences or something?
If not, lets all write in feedback and ask them to change that back!!

Open the link and the shipping number will be on the Safari page that opens.

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Listing of controller Event log messages?

Does anyone know where to find a listing of the Controller event log messages?
I've got a device that is failing to associate for "ReasonCode 2" but I can't figure out what ReasonCode 2 is.
thanks-
Lynne

Thanks for your response.
No, I did not see any authentication messages.
The person who was having the association problem is now working; nothing changed on either the controllers or the client.
I was hoping to find a reference for all the codes so I could look this stuff up myself.
If you happen to know where I could find that I would greatly appreciate it.
Lynne

Missing VSS System Writer and CAPI2 error in Event Log

Hello,
I'm having problems with making full system backup of Windows 2008 R2 x64. It looks like this is related to missing VSS System Writer. When I'm running command "vssadmin list writers" there is no System Writer in writers list and in event log CAPI2 error (event ID 513) is showing with this description:
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
Details:
TraverseDir : Unable to push subdirectory.
System Error:
Unspecified error
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" />
<EventID Qualifiers="0">513</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-03-14T01:06:35.639125000Z" />
<EventRecordID>207975</EventRecordID>
<Correlation />
<Execution ProcessID="968" ThreadID="11588" />
<Channel>Application</Channel>
<Computer>System3</Computer>
<Security />
</System>
<EventData>
<Data>Details: TraverseDir : Unable to push subdirectory. System Error: Unspecified error</Data>
</EventData>
</Event>
any idea what could be wrong?
Thanks in advance

Hello ,
Based on the research, the VSS System Writer runs in the context of CryptSvc service on Windows Server 2008. To make the system writer works normally, please open services
console to verify that the Cryptographic Services logon as the credentials of the "Network Service" account.
The VSS system writer can be missing due to several reasons, to isolate this issue, please refer to the following steps to boot the problematic server with clean
boot mode to perform the test.
Steps: Clean Boot
1. On a problematic server perform a clean boot and check if the issue still exists
2. Click Start->Run...->type msconfig and press Enter
3. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
4. Click Startup tab and Disable All startup items
5. Click OK and choose Restart
After the server reboot, please run "vssadmin list writers" to check if the "System Writer" can be displayed.
If the issue still exists, please open a CMD prompt as Run As Administrator and type the following commands to see if it the system writer will be occure.
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
Moreover, based on the experience, it has been reported that there is some permissions issue which can cause this kind of issue. Please follow the steps below and check
if it can be helpful.
On domain controller
1. Open Active Directory Users and Computers
2. Click View and then "Advanced features"
3. Right Click built and click properties.
4. Click security tab.
5. Grant read permission to 'Authenticated Users'
6. Click Apply and OK.
7. Restart Cryptographic Services.
Note: By Default, it should have read permission for the system to take system state backup.
Hope this can be helpful.
MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Is there a list of 'Event Log' enteries that I sho...

Similar Messages

Maybe you are looking for