Is there a problem with Epson 2.18 update? My printer doesn't print since this was updated.
Recently updated my Mac version 10.6.8 with Epson 2.18 software. My Epson Stylus CX4800 printer is now not printing.
How is the printer set up? Wi-Fi or attached directly to the computer?
Try resetting the printing system.
Reset Printing System
Similar Messages
-
Printing Problem with EPSON LX 300+
Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AMHi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds, -
Is there a problem with firmware 4.30.5 for the WRT54G?
Hello experts,
I have read in this forum that there are problems with firmware version 4.20.5 for the WRT54G.
Is this so? And if so, where might one find the details?
Thanks.There is now a new firmware update available for the AirportExtremeBase. I had a similar problem as all of you, so I hope this will fix the problem!
Download the update here: http://www.apple.com/support/downloads/airportextremefirmwareupdate57formacosx.h tml
PowerBook G4 - 1.67GHz Mac OS X (10.4.4) -
Problems with Epson Stylus 3000 IP Ethernet
Problems with Epson Stylus 3000 IP Ethernet
The printer stops processing after reaching 1,72% of printing.
The Ethernet Cards led is on and blinking green.
I am running
Powerbook G4
OSX 10.4.5
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
I can se it as well in Safari under the ip adress 10.0.0.6
I have tried to test the printer in the Common Unix Printing System
I can see the printer there as well.
A test print here results in
"ipp" stopped unexpectedly with status 1
All my other printers work well and prints test sheets.
The printer has not worked since Tiger.Can you please help me....
I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
Here's what I'm doing:
- I go into Printer Setup Utility
- I choose Add Printer
- I choose IP Printer
- I choose Line Printer Daemon - LPD
- I pop up the "Print using" and select the "EPSON".
- Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
- THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
Where did you find the:
Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
Thank you for you help in advance!
Micdim
G4 Dual 1.42 gig Mac OS X (10.4.5) 1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004... -
Problems with Epson R2400 printer and Mac
I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.
By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above.
-
My app store wont let me download apps, asks me to update my payment details then says theres a problem with previous purchase and card is expired which is untrue someone help me pls
This is a User to User Forum...
See Here for
Mac Apps Store Customer Service
http://www.apple.com/support/mac/app-store/contact.html?form=account
iTunes Customer Service Contact
http://www.apple.com/support/itunes/contact.html -
Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.
Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Face time not working. When dialled it says connecting and drops immediately. When my friends calling it show connecting but it does not.
Is there a problem with face time. I am in south Africa, it was working perfectly up to Easter. Please help this is my life line.There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself. -
Is there a problem with IM and FaceTime as it won't recognise my Apple ID
is there a problem with IM and FaceTime as it won't recognise my Apple ID?
There are reports that iMessage and FaceTime are down.
-
Is there a problem with the itunes and quick time download pages or is it my internet.
Is there a problem with the itunes and quicktime download pages or is it just my internet.
Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/ -
Not working imessage!! Credit card and I can not send imessage than after apple id. There are problems with Apple seeverele?? Thanks!
Before the service reset function. Wait 24 hours to activate imessage.go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once -
I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docxHi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Ive downloaded some apps onto my pc yet only 1 has synced to my ipad, it says something about theres a problem with my billing, yet I purchased the 1 app I got for $20, but 1 free app and another paid, wont sync, i di have money in my account
Right click on your iPad's name in the iTunes app on your computer and choose to transfer purchases. That should transfer anything that you have bought with the App Store app on the iPad to the iTunes app on your computer.
-
I just upgraded to FF7 & now when I open it none of my history or cookies are saved. I have checked in options that Firefox will remember my history and all relevant settings but it is not doing it. Is there a problem with FF7?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
See also "Help About".
*Tap the Alt key or press F10 to show the Menu bar.
In current Firefox releases (29 and later) the orange Firefox menu button has been replaced by the three-bar Firefox Menu button at the far right end of the Navigation Toolbar and this button is always visible, whether you have the menu bar visible or hidden<br>A consequence of this location is that you no longer can hide the Navigation Toolbar
*There is a star like button next to the search bar on the Navigation Toolbar to bookmark the current web page and a "Show your bookmarks" button next to it to open the Bookmarks in a drop down menu.<br>You can find "Show All Bookmarks" to open the Bookmarks Manager (Library) at the bottom of this drop-down list
*If you bookmark a page then "Bookmark This Page" in the Bookmarks menu changes to "Edit This Bookmark"
*You can make the title bar visible via the "Title Bar" button at the bottom left in the Customize palette window
It is still possible to have the menu bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks menu available.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox -
Is there a problem with the latest iTunes update?
After getting the most recent iTunes update my iPhone is no longer recognized by iTunes. When its connected to my computer it charges but you can't see it on iTunes and none of the content can be accessed. I've never had this problem before, and it doesn't happen on my other computer with an older version of iTunes. I've gone through the troubleshooting suggestions for this on the Apple site but nothing seems to work. Is there a problem with the new update? And will it be getting fixed soon?
See Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Help needed in "BADI_CCM_NOTIF_GENER"
"BADI_CCM_NOTIF_GENER", i already created its new implementation, and in the method create , i have two fields .....Notification number and order number. Now i have to update QMEl table ( in its custom appended fields) these two value. This method ha
-
Mysterious files being created in pages. Unable to unlock or delete them.
Mysterious files being created in pages. Unable to unlock or delete.
-
Alternate layout width problem
Hello, After finishing up a design with alternate layouts for tablets and phones, I realized that the content centers great when you initially open the site, and even when you flip back and forth between portrait and landscape orientation. But then i
-
Java script slideshow not fading in google chrome or firefox.
Hi I have built a page in DW CS4 and added a Jave Script fading photo slideshow. Thanks to some previous help from this forum is working great. One problem is that the images don't fade between in Firefox or Google Chrome??? please advise Regards Mar
-
Hi, i am new to ALE so please any one can pelp me step by step process.plz don't send link.