Is there a problem with my external drive?

I recently bought a WD "My Passport" drive - 500GB USB2/3 including WD's own Smartware software. I had to replace it. This is what happened.
I reformatted the VOLUME not the drive, in Disk Utility, from MS DOS FAT32 to Mac OS X Extended (Journalled)
I created 3 partitions
I used two partitions to copy the contents of the 2 partitions of my ancient Wiebetech FW drive
I named the third partition Time Machine
I spent a whole day creating an encrypted disk image the size of my PB G4's HD in the TM partition
Though very slow, it seemed to do everything. The next day it took forever to recognise the partitions, and the drive kept making a metallic tapping sound. Of the first two partitions, it would show either or both, but trying to switch between them in a Finder window caused Finder to freeze and the computer needed a hard reboot. It didn't show the TM partition, except in Disk Utility.
In the end, I phoned Amazon to say the drive was defective and they sent an identical replacement. This time I :
Deleted the WD software first
Reformatted the drive to Mac OS X Extended (Journalled)
Copied my Wiebetech HD to FOLDERS not partitions
Set up Time Machine to use the remaining space (plenty of room left)
So far, it seems to have behaved itself. HOWEVER, when I go into Disk Utility, the top level still shows the drive to be MS DOS FAT32. Yet the VOLUME (which is the same size as the whole drive) is Mac OS X Extended (Journalled). Does this mean the replacement drive is also faulty?

The WD My Books have had far less than glowing reviews for Macs...
http://discussions.apple.com/thread.jspa?threadID=1543028
http://discussions.apple.com/thread.jspa?threadID=2191614&tstart=0
http://x704.net/bbs/viewtopic.php?f=12&t=3219&p=42023&hilit=western+digital#p420 23
http://x704.net/bbs/viewtopic.php?f=6&t=2939&p=34120&hilit=western+digital#p3412 0
The following external hard drives are bootable on Intel-based Macintosh computers systems through USB:
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Premium ES Edition
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Intel-based Macintosh computers systems through FireWire (1394a/b):
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition
• My Book Premium Edition II
• My Book Pro Edition
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
The following external hard drives are bootable on Power PC based Macintosh computers systems through FireWire (1394a/b):
• WD My Book Premium Edition
• WD My Book Pro Edition
The following external hard drives are not bootable on Power PC based Macintosh computers systems through USB/FireWire 1394(a/b):
• My Book Essential Edition
• My Book Essential Edition 2.0
• My Book Home Edition
• My Book Mirror Edition
• My Book Office Edition
• My Book Premium Edition II
• My Book Pro Edition II
• My Book Studio Edition
• My Book Studio Edition II
• My Passport Studio
• My Passport Elite
• My Passport Essential
• WD Passport
• WD Passport (Silver)
My recommendation for an external drive...
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

Similar Messages

  • Problem with 2 External Drives on my new iMac

    I am having a problem when I daisy-chain a second external HD to my first external HD connected to my new iMac. This is the second external HD I've tried this with, with similar problems arising.
    My setup: OS 10.5.6. First external HD: G-Tech Q 1TB; 2nd External HD: also a G-Tech Q 1TB (the first time I was daisy-chaining a LaCie 250GB drive to my first external drive).
    Problem: when my second external HD is daisy-chained to the first external HD my system starts to go wonky. I can't force quit apps for one. My system hangs. On reboot I don't get past the blue screen. If I remove the daisy-chain all is fine.
    I initially had this problem with another external HD I tried to daisy-chain to the first. Same issue.
    I was trying to partition the second external using Disk Utility. When I hit the Partition button, Disk Utility just hung with the beach ball.
    When I attached a second external the first time I tried to do this all sorts of havoc ensued. A lot of apps were hanging and I couldn't Force Quit them. The whole system seemed to go wonky.
    Can anyone tell me what might be happening here?

    I've been doing a bit of research on these boards about daisy-chaining problems and am reading that sometimes daisy-chaining can overwhelm the Firewire bus and even corrupt data. This is what I had experienced the first time I tried to daisy-chain. Someone recommended a powered Firewire repeater (like this: http://tinyurl.com/kl84n5) would be a better solution.
    Given I've got only 1 Firewire port on my iMac, what do you think?

  • Problems with two external drives

    I apologise for posting this again but this question was posted on the day the support site was being worked on, so just in case it was missed by most I am posting it again. I have since heard of at least 3 people who have problems when using more than one external drive.
    I have 2 external drives, a Lacie 300gig, and a Western Digital (in a Smart-drive case) 500gig.
    Both are partitioned, one volume for Time Machine, one volume for a bootable clone (done with Super Duper), the other 2 for various stuff.
    Both drives have extra firewire ports. Whenever I link them together via one or the others firewire ports, I have all sorts of problems, ie. moving data, TM prepares for long periods and will cause the machine not to shutdown or restart, system freeze, Imac sometimes won't start up properly with both connected (blue screen) ect.
    When either drive is plugged directly into the Imac by itself everything is fine.
    I would like both drives always connected.
    Should I use a Firewire hub instead of the HD ports?
    Am I doing something wrong?
    I have replaced leads and run disk utility on both disks, both appear fine.

    The Lacie drive has two extra firewire ports(I have tried both ports), the WD drive has a pass through port. I have tried reversing the drives with the same result.
    Sorry but I don't understand what you mean by full size drives? And how do I configure one or both to be the master?

  • Problem with using external drive in OSX

    Hi there, I have an external hard drive (seagate freeagent 1TB) and I am using Mac OSX Snow Leopard and Windows XP as bootcamp. Yesterday it suddenly happens that I find the drive extremely slow or even unable to read files. It cannot be unmounted as well. I thought the drive has problem and tries to repair it, however when I use bootcamp XP today and mount the drive. It is fast as usual and don't have much problem. Why is this and should I reinstall my OSX to solve the problem? Well I hope I don't have to reinstall but if I have to, I probably will upgrade the system to Lion...

    also sorry if this is a reposted question.....i tried to search around the discussions and couldn't find the answer to my specific situation....actually didn't even see anyone trying to do what i'm talkin about.......again thanks for any help

  • Problems with USB external drive attached to time capsule

    Hi,
    I bought a WD 1 TB my book as a supplemental backup drive, as I've pretty much maxed out the space in my 500 GB TC with backups form two macbooks. It's attached to the TC via the USB 2.0. For the first few months everything worked fine. Now suddenly neither machine can access the WD drive. It shows up in the Aiport utility but not in the finder. When I plug it directly into one of the macbooks it accesses fine, but I bought it specifically to use as additional network backup drive.
    Where have I gone wrong? I updated the firmware for the WD drive, and everything appears fine on the TC and the macbooks. I poked around on the forums and found many a complaint about the WD drives, but I couldn't find a solution to my particular problem.
    Any ideas?
    Thanks.

    The first thing to try is a nice long power cycle of the network if you have not already done this.
    Power everything down, order is not important. Wait 5-10 minutes.
    Start the modem first and let it run 4-5 minutes by itself. Then start the next device connected to the modem the same way. Keep powering up each device the same way until all devices are powered on.
    Any help?
    If no luck, the next thing to try is connect the WD drive directly to your computer and "Verify Disk" using Disk Utility.
    Applications > Utilities > Disk Utility
    Then click "Repair disk"
    If indicated, "Repair Permissions" on the disk.
    Eject the disk and then you'll have to do the power cycle all over again and plug the device back into the USB port on the Time Capsule.

  • Problem with wd external drive

    hello i am using 2TB wd external hard drive which i have recently purchased. i stored about 1.4TB data in it and suddenly problem arises that all of my video files are converted to 463 kB seperately and only it can be run by windows media player not any other player not even vlc , how can i fix it plz help me

    Hello and welcome to the WD community.
    Try too see if the same happens on a different computer, also i would like to know if the space is still occupied on the device.

  • Computer won't startup after Tiger install with Maxtor external drive

    I just upgraded to Tiger on my G4 Dual 450. The computer will not startup with my Maxtor 200 MB external hard drive connected. When it is connected I get a message to restart my computer. The computer starts up and runs with no problems when the Maxtor is not connected. When I connect the Maxtor after the computer is started I get a gray screen to restart my computer. I can connect the Maxtor to another G4 in my office with no problems. Does anyone have any ideas?
    G4 Dual 450 MHz   Mac OS X (10.4.8)  

    Hi, platteau1. Welcome to the Discussions.
    You wrote: "When it is connected I get a message to restart my computer."You are describing the following message:
    That indicates a kernel panic.
    1. First, I suggest you contact Maxtor as there may be a problem with the external drive or it may require a firmware update.
    2. Next, see my "General FireWire troubleshooting" FAQ for advice that may help you troubleshoot the FireWire drive. It may be as simple as a bad FireWire cable or FireWire port on your Mac.
    3. Finally, see also my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • When connecting my ipod to PC I get message Theres a problem with this drive

    I have a new computer
    When I connect my Ipod to it I get the message 'theres a problem with this drive
    scan the drive now to fix it - no idea what this means

    I have a new computer
    When I connect my Ipod to it I get the message 'theres a problem with this drive
    scan the drive now to fix it - no idea what this means

  • When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the driver?

    When downloading from a Sony minidisc video camera, the picture is downloading but without sound.  Previously, it had downloaded successfully both sound and picture.  I have subsequently upgraded to Lion X (10.7.4).  Is there some problem with the upgrade which is affecting the transfer?  Is there a way of resolving this?

    When you have kernel panics, the pertinent information is in the panic report.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Time machine has losing contact with my external drive, connected via a USB port.

    Recently my Time Machine program has begun losing contact with my external drive, connected via a USB port. When I attempt to open Time Machine, it indicates there is no external hard drive.  When I click on "setting up time machine" it opens airport utility.   I've tried rebooting, run disk utility repairs for both hard discs, pulled and reconnected the USB cable, even completely shut down the system.    Eventually the two re-establish contact, but I'm not certain what I've done that causes this.  The lost contact appears to happen during the weekends.  The external hard drive is a MJaxtor OneTouch 4. What should I be doing to solve this problem once and for all?

    I use a little app named EasyFind - free at the App Store. It will allow you to search individual volumes or all volumes.
    Download it and see if it will help.
    Clinton

  • HT1349 Hello, how to move the iTunes master file from C drive to an external drive and them iTunes stick with the external drive after on an on going basic?

    My desktop C drive is full HD of 1 TB, I would like to move the current iTunes master file to an external 4TB drive and then iTunes stick with the external drive
    Could this be done, if yes how to do it?
    Thank you for your help
    Henri

    If it's the same as with a PC, the procedure would be to:
    (a) Plug in the new external drive,
    (b) Set your iTunes preferences such that the iTunes Music Folder is on the new drive,
    (c) Use the iTunes "Consolidate Library" utility to copy your library to the new location.
    (d) When the transfer is complete, check "Get Info" on some songs to verify their location.
    The original files will remain on the old drive, so you'll have a way to recover should there be a problem. You may need to manually copy any iPhone/Touch Apps to the new drive since I'm not sure those are transferred with the Consolidate utility.

  • Mac Pro Early 2008 problems with firewire 400 drives

    I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
    Maxtor OneTouch III 750GB
    Acomdata enclosure/Seagate 400GB
    LaCie d2/160GB
    LaCie w/Lightscribe DVD
    I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
    In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
    Thanks in advance for any counsel.

    I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
    Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
    Don't forget to test your drives with Disk Warrior (4.1) also.
    750GB WD Caviar is $139 SATA.
    http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
    Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
    Never had trouble with OWC enclosures:
    http://www.macsales.com/firewire/

  • Problem booting from external drive

    I'm having trouble booting my MacBook from an external USB drive.
    I've created a bootable backup of my hard drive, using SuperDuper! (in order to be able to install a bigger hard drive and restore my current drive state). If, with the drive attached, I restart and hold down Alt (which I understand should offer a choice of drives from which to boot), I get nothing but grey screen (ie. the first grey you see before the apple logo comes up right at the start of startup). I have been able to boot from the external drive by changing Startup Disk settings, so I'm sure there's no problem with the external disk volume.
    The drive is an Iomega 80GB USB 2.0 drive, and I'm running 10.4.10 on a 2GHz Core Duo MacBook.

    Hey guys,
    Thanks for the feedback... here's my update (still no joy):
    • I'm not sure about the GUID table - how do I check? Does the fact that I can boot from the drive having selected it in my System Preferences mean that it is? It is definitely HFS+ formatted, however. (I gave bad information about the drive type, however - it's a Freecom 400GB, not Iomega 80GB, not that I suppose that makes a difference.)
    • After holding that Alt key for a very long time, my MacBook did show me something other than a plain grey screen: a single, large, internal HD icon in the middle of the screen, above a vertical arrow icon. I take this to mean that the MacBook is recognising the internal HDD and no other volume. The external drive was still plugged into the USB port.
    • The external drive is in fact partitioned as two volumes.

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • Time Machine backup with firewire external drive

    I am having issues with a brand new firewire external drive and I am not sure if it is a drive issue, a configuration issue or what.
    I have a 6tb Firewire hooked up to my machine. This is the drive which is being used as the destination for Time Machine. I have had this drive for awhile and seem to be having no problem with it and have not had an issue with Time Machine previously. I have a new added a second firewire drive (2tb) in daisy chain to the first (the 6tb). Whenever this drive is included in my TM backup profile, TM fails. Whenever I remove it, TM seems to work. I am wondering if the issue is the sequence of the drives (the TM drive perhaps needing to be the last in the chain), an issue with TM or perhaps an indication of a hardware problem with the new drive itself. Anyone got a clue?
    Thanks.

    Okay,apparantly no one else seems to be having this issue. That being the case then, how do I find a log file to get an error code so I can try to determine *why* Time Machine is failing?

Maybe you are looking for