Is there a tool to test load performance of FMS?

Specifically, I want to test exactly how many connections my installed version of FMS can accept.
Is there such a tool for benchmarking with FMS?

Not that i am aware of any in market but the criteria you have specified might not be that difficult to achieve. However i would caution you that it might not be best criteria, number of connections under no load and number of connections when server is doing quite a work might be different numbers.
You can look into below links to see if you find them helpful:
http://www.richinternet.de/blog/index.cfm?entry=6EA082F4-A85E-FD95-A8AB8C7A1770D09A
http://fmsguru.com/showarticle.cfm?articleID=42

Similar Messages

Software tools to test bridge performances

I'd like to know if these is any sotware tool to check performance in a building to building connection (with aironet 350 bridge).
Now I'm timing the transfer of big files from a bridge to the other, but I want to find a more powerful tool (if possible not too expensive).
If someone already uses a software to test connection performance please inform me.
Thanks

You should take a look at MRTG and RRDTool. MRTG is free to use (so not too expensive). You can find info here:
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
Good luck
Joost Koopmans

Test the performance of JSP application

is there any trusted tools to test the performance of jsp web applciation with JDBC code ?
i need to test the performnce wth huge number of users ,
thanks

Hello,
I think the author I already mentioned used this: http://grinder.sourceforge.net/
It is for free.
We have been writing our own tool. The tool was actually not difficult. Problematic was the interpretation of the results. I can only advise you to keep a good protocol about what you have been meassuring an how you did this. Otherwise people will come up with strange ideas about the results of your loadtest.
You have to keep an eye on system ressources: The memory of the boxes involved, but also silly things like available connections. By opening and closing socket connections, we managed to run out of ressources on a SUN pretty fast...
Please be also aware that a loadtest, ..well produces load. Since we were testing a system where the middletier called up to the mainframe for data, we had to pick late hours for our test. At one evening we took 50% of the capacity of the mainframe... Don't underestimate the time it needs for negotiating and scheduling such meassurements!
good luck,
einar

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

Which tool is support Discoverer performance/load testing

Hi,
Any one can tell me which tool is supporting the oracle discoverer for olap 10.1.2.48 performance / load testing.
We are using one of the third party tool called QALOAD. We are unable to trace the discoverer session.
We wanna perform 50 concurrent users peformance test.
is oracle is recommending any tool for performance on the discoverer for olap 10.1.2.48??.
or any one can tell me based on your experience which tool is supporting/best tool to test.
thanks,
Nats!!!

Did you get an answer to your question. We are now trying to use Load Runner rmi calls and have difficulties.
Please provide any information you have on this matter.
Thanks.

Is there any tool uses Selenium tests for performance test

Hello!
I am looking for a tool for using performans test.
I have Selenium test scenarios and I want to use them for performance tests.
Which tools use Selenium tests for performance tests or
Which are the best tools to test a JSF Application? Which experiences
have you made?

Hi,
If you have the test kit installed i.e. the CTK , then you will find it under the corresponding test folder. For example , i have it under C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\tests\target\
The test harness files , tux and kato can be found under
C:\Program Files (x86)\WindowsEmbeddedCompact7TestKit\harnesses\target\
The above two files tux and kato would be required for running any tests on Windows embedded compact platforms.
Depending on your platform , you may choose to use the corresponding binaries in the sub directory.
Regards,
Balaji.

FORMS CRASHES (FRM-92101) ON AS 10.1.2.0.2 DURING LOAD PERFORMANCE TESTING

Hiya
We have been doing Load Performance Testing using testing tool QALoad on our Forms 10g application. After about 56 virtual users(sessions) have logged-in into our application, if a new user tries to log-in into our application, the Forms crashes. As soon as we encounter the FRM-92101 error, no more new forms session are able to start.
The Load Testing software start up each process very quickly, about every 10 seconds.
The very first form that appears is the login form of our application. So before the login screen appears, we get FRM-92101 error message.
However, those users who have already logged-in into our application, they are able to carry on their tasks.
We are using Application Server 10g 10.1.2.0.2. I have checked the status on Application Server through Oracle Enterprise Manager Console. The OC4J Instance is up and running. Also, server's configuration is pretty good. It is running on 2 CPUs (AMD Opteron 3GHz) and has 32GB of memory. The memory used by those 56 sessions is less than 3GB.
The Applicatin Server is running on a Microsoft Windows Server 2003 64bit Enterprise Edition.
Any help will be much appreciated.
Cheers
Mayur

Hi Shekhawat
In Windows Registry go to
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems
In the right hand side panel, you will find String Value as Windows. Now double click on it (Windows). In the pop up window you will see a string similar to the following one:
%SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,20480,768 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
Now if you read it carefully in the above string, you will find this parameter
SharedSection=1024,20480,768
Here SharedSection specifies the system and desktop heaps using the following format:
SharedSection=xxxx,yyyy,zzzz
The default values are 1024,3072,512
All the values are in Kilobytes (KB)
xxxx = System-wide Heapsize. There is no need to modify this value.
yyyy = IO Desktop Heapsize. This is the heap for memory objects in the IO Desktop.
zzzz = Non-IO Desktop Heapsize. This is the heap for memory objects in the Non-IO Desktop.
On our server the values were as follows :
1024,20480,768
We changed the size of Non-IO desktop heapsize from 768 to 5112. With 5112 KB we managed to test our application for upto 495 virtual users.
Cheers
Mayur

Load & Performance testing of VB applications

How we can perform load & performance testing of VB6 applications? Are there any tools available for same?

You could look at something like this:
http://www.aholme.co.uk/Profiler/Install.htm
However VB6 as a development environment is no longer supported by Microsoft and this forum is not for VB6 questions, but VB.NET questions.
Matt Kleinwaks - MSMVP MSDN Forums Moderator - www.zerosandtheone.com

Performance test / Load Test in EP

Hi Experts ,
System Landscape - EP 2004s / TREX rev 31
We need to do response testing / load testing in EP.
Test will cover following KPIs .
    a) Login time / response .
    b) Navigation Time / response.
    c) search time / response.
    d) Load testing .
    Does SAP suggest any tool for this or any method how to perform this .
    Does anybody have any Idea how to go about this ?
Thanks & Regards
Amit kade

Hi Amit,
Check this thread
https://forums.sdn.sap.com/thread.jspa?threadID=21561&tstart=0
Hope this helps.
Regards,
Venkat.
Reward points for useful ans.

Load/Performance Testing?

Hi,
Has anyone used any load testing tools? I'd like to try to test the performance of our website and looking to see if anyone has used any tools. Free ideally, but if not, maybe something affordable.
Any thoughts appreciated
-Westside

Hello Westside,
You can probably do something like that with Jmeter:
http://jakarta.apache.org/jmeter/
HTH, Carl.

Load/Performance Testing using ECATT

Please provide the process to perform Load/Performance Testing using ECATT ASAP.
What are the T-Codes are required to fulfill Load/Performance Testing using ECATT.
Thanks in ADVANCE.

Hello Colleague,
Here are the steps that you need to do, for performance testing using ST30.
Use transaction ST30 to invoke Global Performance Analysis ( Widely used for performance tests of certain transactions ).
On the eCATT test tab, Key in the folloing data
Log ID ( needs to be created ONLY for the first run ),
Performance test ( logically the entries for Perrformance test field are of the format:
Logid_name/PERF_transaction_name/systemname/client/date ),
Name of the testconfiguration ( You need to create a test configuration for the eCATT to be used in ST30, use the same name for the created Test
configuration as that of the test script ),
No of times the test configuration needs to be run as the preprocessor to create the required backend data, No of times the test configutation needs to
run as processor ( both these fields are filled with 5 and 5 or 5 and 10 respectively for performance measurements, but in your case you can give a 1 and 1
or 0 and 1 in these fields for your requirements )
With all the check boxes in the Programming guidelines and Distributed Statistics Data unchecked ( unless req ). In the data comparison ( use No - option
for With values ).
Click on the eCATT test only button to start the performance run using ST30.
Now the procedure stated above makes the eCATT test configuration execute as many times as the sum of pre and pro given by the user AT ONE STRETCH ONLY. But if there is a requirement of having the eCATT execute after an interval, we follow a different approach.
We have a VB script that will create a ECA session, call se37, select the required test package and then execute all the required test cases ( eCATTs ) in the
test package and also ensure the KILL ECA session at the end of the execution.
We then create a batch file to execute the VB script and call the batch file for our executions
In you case, please schedule the execution of the batch file for every 30 mins ( or any such time duration ) using the simple scheduler functionality provided by
Windows.
The only problem with this is that whenever we have some system messages / Software updates / any new screens the scheduling is bound to fail as the called VB script does not handle the new situation. Please also ensure that the user whose Password has been given in the scheduler has to be the user who has logged into the system during the execution period.
So, to summarize : ST30 will only allow you to run the eCATT as many times as required, but only at ONE STRETCH, you need to use the second mechanism to make the eCATT run effectively after a predetermined time without any user interaction.
FYI : A new feature to handle the scheduling of executions is being developed, will post the details when it is available and the usage steps soon. We also have a new command called PERF ENDPERF in eCATT also ( a new development ), kindly go through the documentations for the new developments in eCATTs for the same
Thanks and best regards,
Sachin

Tools available to load/performace test

Hello,
What are some of the tools available to load test E Business Suite (11.5.10.2)? We would like to test both the browser based applications as well as java applet based applications (base apps).
Load Runner seems to be very expensive.....
Hope to hear back on this soon.
Thanks
Piyush

Hi,
Have you tried using MS-Excel based template that uses macros ? It in itself would help in measuring timings, but does allows posting a batch load of txns in Apps - if you can derive the timings from some other tool.
Rgds,
Rakesh.

Testing tool to monitor MDB performance

Hi All,
Can any one of you help me in identifying a tool to monitor the load/performance
of MessageDrivenBean
Thanks in advance
vijayanand

to find out top most query which take more time
SELECT B.USERNAME UERNAME,A.DISK_READS READS,
A.EXECUTINS EXEC,A.DISK_READS/DECODE(A.EXECUTIONS,0,1,A.EXECUTIONS) RDS_EXEC_RATION,
A.SQL_TEXT STATEMENT
FROM V$SQLAREA A,DBA_USERS B
WHERE A.PARSING_USER_ID=B.USER_ID
AND A.DISK_READS >10000
ORDER BY A.DISK_READS DESC;
TOP MOST QUERY
SELECT * FROM
(SELEC ADDRESS,RANK() OVER(ORDER BY BEFFER_GETS DESC) AS RANK_BUFGETS
TO_CHAR(100 * RATION_TO_REPORT(BUFFER_GETS) OVER(), '999.99') PCT_BUFGETS FROM V$SQL )
WHERE RANK_BUFGETS <11

Is there a tool for automated GUI feeding?

Hi!
I did not find a better place for this question:
Let's assume that I have a running Java GUI, is there any tool to access the GUI elements, i.e. to connect to a running GUI (from another script or program), push buttons and fill in text to text fields and so on?
I would like to perform automated tests..
Best regards

Hello,
You can use the freeware tool Marathon. It is a nice tool which can be used for automated testing. It also has a script recorder. The script is in jython which makes our job easier.
You can find this at,
http://marathonman.sourceforge.net/
Ranga.

Unable to load performance pack, using Java I/O.

Hi there,
I am trying to start weblogic 6.0 from jBuilder. It does start, and
working. But, I got the one problem about loading performance pack. The
message is the following. Any comment?
Thank you
----------------------------------------->Starting WebLogic Server ....
<Jun 27, 2001 1:35:13 PM EDT> <Notice> <Management> <Loading configuration
file C:\bea\wlserver6.0sp1\config\mydomain\config.xml ...>
log file:
C:\bea\wlserver6.0sp1\config\mydomain\config\config\mydomain\logs\weblogic.l
og
<Jun 27, 2001 1:35:14 PM EDT> <Info> <Logging> <Only log messages of
severity "Error" or worse will be displayed in this window. This can be
changed at Admin Console> mydomain> Servers> myserver> Logging> General>
Stdout severity threshold>
<Jun 27, 2001 1:35:46 PM EDT> <Notice> <WebLogicServer> <ListenThread
listening on port 7001>
<Jun 27, 2001 1:35:46 PM EDT> <Notice> <WebLogicServer> <WebLogic Server
started>
<Jun 27, 2001 1:35:46 PM EDT> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.UnsatisfiedLinkError: no wlntio in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at weblogic.socket.NTSocketMuxer.<init>(NTSocketMuxer.java:173)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:126)
at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:83)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:224)
>

Thank you
But, it does not work. It does the same. Here is the message.
------------------------------------------------------------>C:\bea\jdk130\bin\javaw -classpath
"S:\Java\classes;C:\jdk1.3\jre\lib\rt.jar;S:\Java\lib\activation.jar;S:\Java
\lib\classes12.zip;S:\Java\lib\cos.jar;S:\Java\lib\dx3.0.jar;S:\Java\lib\dx3
.0-res.jar;S:\Java\lib\fscontext.jar;S:\Java\lib\j2ee.jar;S:\Java\lib\java40
.jar;S:\Java\lib\jgl3.1.0.jar;S:\Java\lib\jsdk21.jar;S:\Java\lib\junit.jar;S
:\Java\lib\mail.jar;S:\Java\lib\msclasses.zip;S:\Java\lib\rootriver.report.j
ar;S:\Java\lib\servlet.jar;S:\Java\lib\ServletExecDebugger.jar;S:\Java\lib\s
truts.jar;C:\bea\wlserver6.0sp1\lib\weblogic.jar;C:\bea\wlserver6.0sp1\lib\x
mlx.jar;C:\bea\wlserver6.0sp1\bin;C:\junit3.5\junit.jar;C:\jakarta-struts-1.
0-b1\lib\struts.jar;C:\JBuilder4\jdk1.3\demo\jfc\Java2D\Java2Demo.jar;C:\JBu
ilder4\jdk1.3\jre\lib\i18n.jar;C:\JBuilder4\jdk1.3\jre\lib\jaws.jar;C:\JBuil
der4\jdk1.3\jre\lib\rt.jar;C:\JBuilder4\jdk1.3\jre\lib\sunrsasign.jar;C:\JBu
ilder4\jdk1.3\lib\dt.jar;C:\JBuilder4\jdk1.3\lib\tools.jar" -ms64m -mx64m -
classpath
"C:\bea\wlserver6.0sp1;C:\bea\wlserver6.0sp1\bin;C:\bea\wlserver6.0sp1\lib\w
eblogic_sp.jar;C:\bea\wlserver6.0sp1\lib\weblogic.jar;S:\Java\classes;S:\Jav
a\lib\classes12.zip;C:\jakarta-struts-1.0-b1\lib\struts.jar;S:\Java\lib\dx3.
0.jar;S:\Java\lib\rootriver.report.jar;S:\Java\lib;S:\Java\lib\struts.jar;"
"-Dweblogic.RootDirectory=C:\bea\wlserver6.0sp1"
"-Dweblogic.Domain=mydomain" "-Dweblogic.Name=myserver" "-Dbea.home=c:\bea"
"-Djava.security.policy==c:\bea\wlserver6.0sp1\lib\weblogic.policy"
"-Dweblogic.management.password=password" weblogic.Server -hotspot
Starting WebLogic Server ....
<Jun 27, 2001 4:00:39 PM EDT> <Notice> <Management> <Loading configuration
file C:\bea\wlserver6.0sp1\config\mydomain\config.xml ...>
log file:
C:\bea\wlserver6.0sp1\config\mydomain\config\config\mydomain\logs\weblogic.l
og
<Jun 27, 2001 4:00:50 PM EDT> <Info> <Logging> <Only log messages of
severity "Error" or worse will be displayed in this window. This can be
changed at Admin Console> mydomain> Servers> myserver> Logging> General>
Stdout severity threshold>
<Jun 27, 2001 4:02:32 PM EDT> <Notice> <WebLogicServer> <WebLogic Server
started>
<Jun 27, 2001 4:02:32 PM EDT> <Notice> <WebLogicServer> <ListenThread
listening on port 7001>
<Jun 27, 2001 4:02:32 PM EDT> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.UnsatisfiedLinkError: no wlntio in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1312)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at weblogic.socket.NTSocketMuxer.<init>(NTSocketMuxer.java:173)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at weblogic.socket.SocketMuxer.makeTheMuxer(SocketMuxer.java:126)
at weblogic.socket.SocketMuxer.getMuxer(SocketMuxer.java:83)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:224)
>

Is there a tool to test load performance of FMS?

Similar Messages

Maybe you are looking for