Is there a way of using keyboard input?

Is there a way of using keyboard input in Edge? For example when you press the space-bar it will open a url. This is probaly done though programing.

Shift/Command and Alt/Control have there own separate event routines.
Example
e.metaKey         // depends on browser and targets the Apple key
e.ctrlKey             // targets the Control or Ctrl key
e.altKey              // targets the Alt key
e.shiftKey           // targets the Shift key
So if you only wanted the event to fire when the Shift key is pressed, then
if (e.shiftKey){                                              //If Shift key is pressed 
       window.open("http://www.adobe.com", "_blank");
If you wanted to combine the Shift key + Space Bar to trigger the event, then resort to logical operators. In this case you want to 'combine' key strokes, then the logical operator would be a double &&, and demonstrated below.
if (e.shiftKey && e.which == 32){                     //If Shift Key + Space Bar pressed
      window.open("http://www.adobe.com", "_blank");
If you wanted to combine the Shift key + some other keyboard Character Code from the above noted list (http://rmhh.co.uk/ascii.html), then change the value of e.which to equal (==) that Character Code. Example from the list, the Character Code for the keyboard 'a' is 65, as altered below.
if (e.shiftKey && e.which == 65){                     //If Shift Key + A pressed
window.open("http://www.adobe.com", "_blank");
To get an accuarte keycode value, there are two demonstrations on this page http://api.jquery.com/event.which/, whereby you can type in thee field and it will capture the value for you.
Good luck
Darrell

Similar Messages

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • Is there a way to use proper mainland chinese characters on an ipad instead of the apple variants?

    I have been learning Chinese at University, and I bought an iPad to help my studies and I have found that Apple for the international keyboard has variants for many different chinese characters. Why is this and is there a way to use the chinese characters that 1.6 billn people use rather than the Apple variants? Will Apple be addressing this at all?

    No, The simple and traditional are fine, but when typing in simplified there choices for say, 将 or 骨 are different from both Simplified and Traditional entirely. If I had copied Apple's characters in tests I would have lost grades. I've never seen it happen on another operating system and unfortunatley Microsoft beats Apple in this field; hence why I call them Apple variants. I'm not the only one who has see this problem. The only way to get what I would call authentic chinese characters is with the method that is stated above. I found this solution in the thread titled "Chinese characters misrepresented". There are screen shots there too. I would love to find out how/why Apple chose this system for chinese.

  • Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?

    Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably?  I don't see it listed in keyboard shortcuts; is there any way to add it?  Thanks!

    I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
    Here they are.
    Get information
    Open iMovie Help
    Command-Shift-Question Mark (?)
    Open the Project Properties window
    Command-J
    Open the Project Theme window
    Command-Shift-J
    Show playhead info
    Shows date, time, and keywords for video frames above the playhead.
    Command-Y
    Import and export
    Import from camera
    Command-I
    Export movie
    Command-E
    Play video
    Play video beginning from the frame beneath the pointer
    Space bar
    Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
    Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
    Left Bracket ([)
    Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
    Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
    Right Bracket (])
    Play selection
    Slash (/)
    Play selected event or project from the beginning
    Backslash (\)
    In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
    Right Arrow key
    In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
    This action works only if you’ve already sped up the playback.
    Left Arrow key
    When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
    Shift-Down Arrow key
    When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
    Shift-Up Arrow key
    When playing Event video, jump forward to the next clip
    Down Arrow key
    When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
    Up Arrow key
    Play the selected Event or project full screen
    Command-G
    Exit full-screen mode
    Escape (Esc) key
    Move the playhead by one frame
    Left Arrow key or Right Arrow key
    Freeze the playhead
    Hold down Control key
    When skimming, keep the cursor in the middle of the row
    Option-Shift
    Manage projects and events
    Create new project
    Command-N
    Move to Trash
    Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
    Command-Delete key
    Open iMovie preferences
    Command-Comma (,)
    Page setup
    Command-Shift-P
    Print selected Event or project filmstrips
    Command-P
    Select and edit video
    Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
    Command-A
    Select to playhead
    Expands or contracts the selection from the nearest selection border to the playhead.
    Shift-A
    Deselect all clips
    Command-Shift-A
    Add selected frames to project
    E
    Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
    Command-Shift-S
    Cut selected frames
    Command-X
    Copy selected frames
    Command-C
    Paste selected frames
    Command-V
    Paste all adjustments
    Command-Shift-V
    Paste video adjustments
    Command-Option-I
    Paste audio adjustments
    Command-Option-A
    Paste crop adjustments
    Command-Option-R
    Paste cutaway, green-screen, or picture-in-picture adjustments
    Pastes adjustments, depending on which type of video is selected.
    Command-Option-U
    Paste video effect

  • Is there a way to use a bookmark from Maps as the home/work address of a contact?

    I'm trying to use location-based reminders. But the Home and Work addresses I have in my own contact card are not recognized by Apple Maps.
    Is there a way to use Apple Maps to set the Home and Work addresses in my contact card to something that it will be able to understand?
    Edit: It doesn't have to be with Apple Maps. Google Maps or any other service where I can bookmark my "Current Location" would be fine. I just want an effieient way to use Location-based reminders when manually inputting an address is not an option, but locating it on a map is.

    Unfortunately there is no way to do that current stage , you would need to add the tags manually.
    Thanks,
    Sanjit

  • I am trying to create an outline for a communication class. Is there a way for me to input Roman numerals in pages?

    I am trying to create an outline for a communication class. Is there a way for me to input Roman numerals in pages?

    Only one Bookmarks Toolbar is allowed. You can create Folders on the bookmarks toolbar (named "Sports", "News", etc.) and add or move your bookmarks to those folders.
    *https://support.mozilla.org/en-US/kb/bookmark-folders-organize-your-bookmarks
    **Above demonstrates making folders in Bookmarks Menu in the Library window, but you can do the same under Bookmarks Toolbar in the Library window..
    **You can also create a new folder in Bookmarks Toolbar by right-click on the Bookmarks Toolbar itself and choose New Folder to create a folder on the Bookmark Toolbar.
    *More Bookmarks information - https://support.mozilla.org/en-US/kb/use-bookmarks-to-save-and-organize-websites?redirectlocale=en-US&redirectslug=how-do-i-use-bookmarks
    Other-
    *update Java to 1.6.0_35 or 1.7.0_7 for security issues
    **https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
    *update Shockwave Flash for security issues
    **https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games#w_keeping-flash-up-to-date

  • Is there a way to use the Unicode Miscellaneous Symbols in Photoshop CS3?

    Hi,
    Is there a way to use the Unicode Miscellaneous Symbols, a list of which can be found here: http://en.wikipedia.org/wiki/Miscellaneous_Symbols in photoshop CS3?
    I've enabled unicode on my keyboard; and I can make the symbols if I type them in Textedit. But, if I try to copy and paste them into Photoshop it doesn't work.
    Is there a way to access these symbols in Photoshop? They aren't in the Symbol, Wingdings, or Zapf Dingbats fonts.

    Hi Chris,
    Thank you very much for the message.
    With unicode enabled and the character palette open, I have to change View from Glyph to Code Tables in order to find the characters I need. (What I need isn't available in the glyph view as far as I can see). Then I scroll down to the unicode series beginning 00002600 Miscellaneous Symbols. I tried copying and pasting a character from here into photoshop, but it didn't work.
    Unfortunately, I don't see the symbols I need in the glyph view. Is there a way to copy and paste from the code tables view? If you have any suggestions, please let me know.
    Thank you.
    -Laxmidi

  • Is there a way to use a statically defined appearance stream in a dynamically created annotation?

    Hello,
    I want to create a document with cascading 'popups'.  Not the built-in text-only popup, but an annotation containing an appearance stream that defines text and images.  I'm currently using widget annotations based on a pushbutton field.
    Each page in my document has many citations that refer to other pages in the document.  When a user hovers over the citation, I want a 'popup' to appear containing a depiction of the destination.  However, as the destination will itself have citations, I also want the 'popup' to contain citations that the user can hover over, triggering another popup, etc.  In this way, a user could navigate throughout the document without leaving the page or even clicking the mouse.
    Obviously, with even a modest number of citations per page, pre-calculating and statically defining all of these widgets causes a combinatorial explosion, making the document sluggish and very large.
    Instead, I'd like to statically define appearance streams once per document, and then dynamically create annotations and assign the appropriate appearance stream using JS as the user navigates.
    So far I've created a named AP in the names dictionary, but I haven't been able to use it to dynamically set an appearance stream of a dynamically created widget annotation.
    Also, I've called Doc.getIcon(), passing in the named AP, which returns an Icon object.  However, after field.buttonSetIcon() and passing in the named AP, the button does not display the icon.
    Is there a way to use a statically defined appearance stream in a dynamically created annotation?
    Thank you,
    Dave

    Hi George, I've gotten named APs to work, and I expect hidden buttons will follow.  Thank you very much!
    Quick follow-up - I will have many documents embedded within the same pdf file, and some of these documents will contain identical popups.  However, I don't want to store identical icons in each document on account of file size.
    Instead, I'd like to store one instance of each icon for all documents in the file.
    Can I store all of the icons in a single document, and then access them by calling <DocName>.getField().getIcon() from any document in the file?
    Thank you again,
    Dave

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • HT1541 is there a way to use my itunes credit to send a gift card? i have credit from gift cards on my account and would like to gift some of it to someone else.

    Is there a way to use my itunes credit to send a gift card to someone else. I have credit on my account and would like to gift some of it but cannot figure out how to use the credit to do so. It appears I can only send a gift by charging to my credit card.

    You cannot use gift balance for gifts.
    Sorry

  • Is there a way to use iPhoto and *not* have it import photos?

    Hi there,
    I'm transitioning from a PC to a Mac and everything is going fairly well -- overall a better user experience. One question I have is, is there a way to use iPhoto without having it import photos? My main issue is that currently iPhoto imports all the photos that I want to view/edit in iPhoto and copies them to it's own folder structure. I like to manage my pictures in a folder structure that I define, so I already back up my photos to another location and now I'm finding that iPhoto is just duplicating the pictures that I already have where I want them, sucking up precious space on my SSD.
    So is there a way for me to just point iPhoto to a folder, make my edits on those photos, and have iPhoto automatically save those changes to the original folder I pointed it to, instead of duplicating the photos in it's own folder structure?
    It occasional things like this that makes me miss some Windows features. In this case, I miss Windows Photo Gallery.

    Hm, ok so if I edit my photos (adjust brightness etc) in iPhoto and then export it, does it export with the brightness changed, or does it just export the original?
    It exports whichever you choose - the edited version or the original.
    However, am I the only one with trust issues with importing all my photos into iPhoto? I'm scared the library will get corrupted, etc.
    NO you're not the only one. The protection against any data corruption is a good back up, and you need that for any data on any computer running any OS. But in the case of iPhoto, remember too that the original files are stored exactly as they are imported, in folders, in the filing system.
    that when I go to export the photos, there's a LOT of duplicate file names that the export chokes on, which makes it very tedious, no, painful, for me to export a large number of photos.
    Explore the options under File Name when you export from iPhoto using the File -> Export command
    Regards
    TD

  • Is there a way to use PM4.0 with Windows XPH?

    Is there a way to use PM4.0 with Windows XPH without purchasing the latest suite or upgrades?  I origionally purchased a suite with Pagemaker, Photostyler and Freehand just before Aldus went Adobe, and Win3.1 went Win95, then WinME and WinXP.  I miss PM and have several manyscripts saved on PM4.0 and can not export or import them to any current wordprocessing programs.  I was very far into one manuscript and am now in a position to finish it up but don't want to have to purchase a whole suite in order to do so.  Any suggestions for this old tightwad?  [email protected] 

    Jay Chevako wrote:
    Find an old computer and run win3.1.
    Jay
    Shouldn't that be Win3.0  c.1991?  And with a very early of version ATM (Ver 2?)  if you want to do anything with fonts?
    I think I have a WinME PC in the garage, which if you can re-format with DOS 5 and install Win3 instead (I may have the disks in the garage too), PM4 will positively scream along.
    I reckon it's non starter on a modern WinXP PC, as the OS is so different, but if you're willing to experiment, you never know!
    But if you want to open some old files to extract the text, you can open the PM4 files and save them with a d/l'ed trial copy of PM7, which will be OK on WinXP
    Iechyd da! John
    23:45 27/04/2009

  • Is there a way to use two macs to run one app? I want to use my two macbook pros processors in a shared capacity.

    I have two macbook pros a 2.4ghz and a 2.2ghz. Is there a way to use the other macbook pro to help with any cpu intensive apps like audio and video apps. I haven't had much luck on finding anything about sharing resources. It would be awesome if you could link up two macs and use both of them to power through processor intensive tasks.

    Yep here you go.
    http://www.youtube.com/watch?v=vLujLtgBJC0

  • Is there a way to use iCloud Photo Library WITHOUT syncing?

    The idea I had of iCloud Photo Library was that I could upload my pictures to it and access them from all my devices WITHOUT having to sync them.
    At the end of every month, I move all the photos from my phone to my computer. It helps me save space and keep things tidy. With iCloud Library, I want to access all my photos, but it looks like I must sync them through iCloud, and then to save space in my phone, I have to select "optimise space for iPhone". Is there any way to use iCloud Photo Library as a mere cloud storage? I don't want to keep photos on my phone, neither full resolution or "optimised" ones. I want to put them on iCloud, and when I need them, then I want my phone to download them.
    I realise I could use other cloud storage providers for this, but I have always liked Apple's integration with their own services, so if possible, I would like to use iCloud Photo Library without syncing to my devices. Just keep my stuff in iCloud, and when I tap it, download it.

    www.icloud.com.
    Doesn't work well in IE8 (9 I would think is ok), but is fine in the current version of Chrome.

  • Is there a way to use ipod with new computer without erasing entire library

    I'm not really tech-savvy, but I'm tossing my old computer and getting a new one - is there a way to use my ipod on my new computer without erasing my existing library? It won't let me make changes to my ipod and wants me to erase everything that is on there right now - HELP!

    Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. When your iPod appears in iTunes enable it for disk use, this is required for most if not all the utilities listed below so they can access the files: Using your iPod as a storage drive
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
    The transfer of non iTMS content such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    iRepo Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows Versions
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows Versions
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. The procedure is a bit involved and won't recover playlists but if you're interested it's available at this link: Two-way Street: Moving Music Off the iPod
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.

Maybe you are looking for

  • Issue in invoking Webservice developed in JDev 10.1.3

    Hi all, I have a requirement wherein i am passing a XSD to Java converted Bean Class(using JAXB) as input to a Simple Webservice which follows J2EE1.3 standards. when i am invoking the same from Internet Explorer it is working fine and giving expecte

  • Security Filtering on the v7 Web Server using sed_request

    I have been trying to improve protection of an application from cross-site scripting and SQL injection attackes. The ideal solution is the modsecurity rulebase but this is for Apache 2 only so I haev been looking for other solutions. I'm not going to

  • Preview icon on windows 7/8 has status, but not "hangup"

    When you hover over the skype icon on the taskbar in Windows 7/8, the preview window has the ability to set your status (away/do not disturb/invisible etc) which is great.  however, it would be GREAT, if while in a call, I could hang up from the prev

  • Transactions accross iFS and 'normal' database

    I want to do a combined transaction where file operations are combined with normal table data transactions - for instance I would like to delete a file and at the same time insert a row in my log-table (this is just an example :-)). The documentation

  • Downloading Adobe Reader on new I-Mac

    I recently purchased an I-Mac and after downloading Adobe Reader a couple of times, I continue to get the message; "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and rel