Is there a way to control where a web page opens on my desktop when I click on a link in my email (Mail)?

So while I'm reading my emails, I get a lot of Twitter notifications. I like to just click on the Twitter link & keep on reading mail until I get to the end. But sometimes the Twitter web page opens right over the top of my Mail page. It's not a big deal, but I get a lot of these, so over the course of time it's a big waste of time to keep moving the web pages over to keep reading my emails.
Is there a way for me to determine where on my desktop the new web pages open when I click on links?

Is there a way for me to determine where on my desktop the new web pages open when I click on links?
Not sure if that can be done but you can press the Expose   key which will show all open windows.

Similar Messages

  • Way of control style in web page composer

    Hi, I want to know what is the way to control the style in web page composer.
    Directly on the layout? I have heard something about "sdn_general.css", is that stylesheet? Where is?
    Thanks in advanced.
    Regards.

    HI @ all,
    I'd be really really pleased if somebody could help me because it's been now several day I tried to find out and I can't get the solution: 
    Me too, I want to customize the css layout of the output web composer makes on the external facing site. Where do I implement / change / access the css?
    It seems that normally the output is dependent (e.g. the colors) from the theme which is configured in the portal. So, how can I "overwrite" it?
    Thanks in advance & best regards!

  • Is there a way to automatically have a web page begin to scroll down?

    Is there a way -- sort of an "autoplay" sort of way to have a web page begin to slowly scroll down to the bottom like a teleprompter automatically? I know this isn't technically iWeb but the site is created in iWeb and from that basis I'm sure I"ll have to edit the code somehow -- like is done when making autoplay movies and music.

    Settings > iCloud > Photos > My Photo Steam > On.

  • Is there a way to have firefox save web pages from a batch list of urls

    Is there a plugin for firefox to load urls from a list and save the pages including images to file

    I'm not aware of such an add-on, but it might exist. There also might be a Greasemonkey userscript that will load the pages and fire the save.
    This thread discusses way to save pages once you have them loaded: [https://support.mozilla.org/en-US/questions/923234 How to save a website using firefox. | Firefox Support Forum | Firefox Help].

  • Is there a way I can download this web page on to my home page

    How can I put this apple site on my home page on my iPad

    It is one of the options used by the bookmark button, it is on the second page. Go to page, touch the arrow in the box button, swipe left.

  • There seems to be a problem between my Eudora on my Mac OSX in that when I click on a link in an e-mail, more and more of them only result in the message "Url is not syntactically valid" and cannot make a connection to the websites.

    This seems to be an increasing problem and is occurring between e-mails and company websites which used to function properly. I used to think it was the fault of the website in not making a connection. But now it is occurring in e-mails which used to be successful, so I think it is a problem with Firefox.

    This?
    *Restore Toolbar Control (Pill) Button: https://addons.mozilla.org/firefox/addon/restore-toolbar-control-pill-b/

  • When I click on a link in an email I always get a message 'General failure URL :.... unable to find file' and seconds later the web address opens. Is there anyway to stop this?

    I get a message saying 'General Failure. The URL was: ".........". The system cannot find the file specified' whenever I click on a link in an email and then seconds later the web site opens. If I open firefox and then click a bookmark or search I don't have a problem

    See this lnk for a fix, it worked for me!
    http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

  • After updating Firefox to 10.0.2, when I click on a link in an email, I get an error box saying "There was a problem sending a command to the program".

    I have not changed/updated my mail client, Windows Live Mail, so I assume the problem is with the updated Firefox.

    Try:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • Time machine makes 30 backups for the last two days, no backups for any earlier times: is there a way to control it?

    I've been running Time Machine in the background for as long as I've owned my current Mac--- a few months.  It is a completely generic set-up: it's a desktop (rarely shut off or asleep) connected to an external hard drive that is much larger (1 TB) than my internal hard drive (0.5 TB), and Time Machine is configured to save backups of my whole internal drive to the external drive.  The external is half-full, and the internal is a little more than half-full.  I often hear my external crunching away, working on something.
    I recently needed to access an old file, so I went into Time Machine mode on the folder where it had been deleted a few weeks ago.  While I'm not upset that it isn't available (it's my own fault for deleting it), I didn't expect the Time Machine to have such a bad distribution of saved backups.  There are 30 backup snapshots of the past two days, and nothing earlier.  I was expecting something more like a few from today, a few from this week, a few from this month, and a few going all the way back in time--- a broader distribution.
    I don't see any way to control this in the Time Machine Preferences (in fact, very little control at all).  Is there a secret way to control it, or some tip to ensure a more useful distribution of saved snapshots?
    Thanks,
    -- Jim

    Thanks, but it doesn't exactly address my question.  TimeMachineEditor allows me to set the intervals or times when backups occur, but it doesn't control the algorithm that decides which snapshots should be deleted.  My problem was that Time Machine chose to delete all of the old snapshots and keep only the most recent ones: I'd like it to keep more of the recent ones than the old ones, but still keep some old ones.
    In fact, the (unmodifyable) text on the Time Machine control panel says that it keeps:
    hourly backups for the past 24 hours
    daily backups for the past month
    weekly backups for all previous months
    That would be perfect if it were true.
    Perhaps the algorithm did the wrong thing because the size of my internal hard drive varied quite a lot a few days ago: a process got out of control and used up all of my internal disk space.  I killed the process and deleted its output (several times), so my internal disk eventually went back down to normal.  Perhaps in the intervening hours, Time Machine made a backup, once an hour, and used up all of the external drive space.  When it had to choose between keeping "weekly backups of previous months" and "hourly backups of the past 24 hours", it chose to keep hourly backups of the past 24 hours.  This was the wrong choice in my case (it was the unwanted output) and is probably the wrong choice in most cases.
    Is there a way to control the algorithm that decides which backups to keep and which to delete?  I would have it delete the hourly, daily, and weekly backups in a way that preserves their relative distribution.
    By the way, while I have made it sound like my problem was a runaway log file (something that would be easy to put in an excluded directory with Time Machine's "Options" button), it was a VirtualBox snapshot merge.  The data in question are precious, but were unnecessarily copied many times while VirtualBox failed to merge them properly.  I can't simply exclude a directory: I'm talking about a more general problem.
    Thanks!
    -- Jim

  • Is there a way to control "sleep" in iOS7?

    Hi everybody,
    Is there a "sleep" control on iOS7? In other words, if I use my iOS device and I don't turn it off and just leave it sitting there on the table, is there a way to control how long it takes until the screen dims and then eventually goes to sleep (where the screen goes black and appears as if it is shut down)?
    My mom's iPad 4 has an Apple brand cover (where the iPad turns on and off as you open/close the cover), and if she leaves the cover open then the iPad screen just stays on (bright). I haven't sat there and timed it, but I know it stays on for quite a long time.
    Is there a way to control these things in iOS7? Thanks!

    Smitty195,
    Not sure if you ever figured this out. I was looking at my phone figured it out so that I could clarify. The answers above didn't really make sense themselves.
    Under Settings>General>Auto Lock ...... This will make your phone "sleep" after the time specified (go to black screen). This has little to do with the Passcode. This is just to make your phone "sleep".
    Under Settings>General>Passcode Lock ..... This will determine how long before your phone asks for a Passcode when you "Slide to unlock".
    If you set your phone to "sleep" ("Auto Lock") after 1 minute, and set your "Passcode Lock" to "Require Passcode" After 15 min., your phone will "sleep", and when you wake it up, if 15 minutes has not passed, you will "Slide to unlock", but not have to input your Passcode.
    I hope this helps to clarify!
    Thanks,
    JennaWolf

  • Is there a way to specify where an app starts on your screen

    Is there a way to specify where the JFrame will appear on your screen at runtime by default? For me it always starts on the upper left hand corner, and I want it more in the middle.

    Sorry, that should actually read:
        frame.setSize(800, 600);       
        // center the frame       
        Dimension size = frame.getSize();       
        Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();       
        frame.setLocation((screen.width - size.width) / 2, (screen.height - size.height) / 2);       
        frame.setVisible(true);cheers,
    Greg

  • Is there a way to control the number of concurrent SMTP connections on Database Mail?

    Las week Rackspace started controlling the number of concurrent SMTP connections and we are now getting the following message when we send as little as 15 messages at a time using Database Mail:
    Exception Message: Cannot send mails to mail server. (Service not available, closing transmission channel. The server response was: 4.7.0 smtp13.relay.dfw1a.emailsrvr.com Error: too many connections from IP xxx.xxx.xxx.xxx)
    We are using SQL Server 2005 and Windows 2003 and we have been doing this since 2006 with no problems
    Is there a way to control the number of concurrent SMTP connections used by Database Mail or the Database Mail external executable DatabaseMail90.exe?

    Hi rkohler,
    Usually, we can use the Database Mail Configuration Wizard or the Database Mail stored procedures to determine the server name and port number for the Simple Mail Transfer Protocol (SMTP) server . In the SMTP server points, we can set or increase the number
    of concurrent connections.
    There is similar issue about database email on SQL Server 2005, you can refer to the following post.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/6bb7b600-f025-451b-898b-2caa29c10d4d/only-some-email-gets-sent-successfully-from-spsenddbmail-database-mail-on-sql-server-2005
    Thanks,
    Sofiya Li
    If you have any feedback on our support, please click here.
    Sofiya Li
    TechNet Community Support

  • Is there any way to control the volume on my Apple TV?

    Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
    First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
    Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
    The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

    Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
    It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

  • Is there a way to control "push" page transitions when using up/down keys to navigate a PDF?

    I have a multi-page PDF designed with push page transitions. When using the forward/back arrow keys or the interactive buttons I have designed on the page, the push navigation direction changes whether one is moving forward in the PDF or back. However, if I use the mouse scroll button or up/down arrow keys to navigate, the push navigation only animates from the same direction...and therefore makes it look as if the user is only moving "forward" in the book. Is there a way to control this effect more precisely?
    I am creating the document with InDesign CC 2014, adding the page transitions within the file, and exporting to interactive PDF using the setting "Page Transitions: From Document".

    I don't think the iPad has it in it to control another device. Unless there's an app for it to be a remote control, but I'd imagine that it woudl be very brand specific.
    You can certainly experiment with the VGA or HDMI adapters, but I wouldn't put total faith in them unless you had the ability to experiment prior to your presentation. I'd definitely have a backup plan.

  • Is there a way to control the quality of my pdf file when exporting from a .pse file?

    Is there a way to control the quality of my pdf file when exporting from a .pse file?
    Hi,
    I have 2 pages in all in a .PSE file.
    When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
    Please advise how I can export the file so that i can have better quality.

    Rik Ramsay wrote:
    To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
    Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
    Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

Maybe you are looking for